Application Of Tailings From Aluminium, Copper, And Iron Extraction As Asphalt Mixture Materials: A Review, Daniel Oguntayo, Temitope Awolusi, Samuel Gboyega Arowolo, Paul Terkumbur Adeke

Research outputs 2022 to 2026

The increasing global demand for pavement infrastructure has intensified the consumption of non-renewable construction materials, particularly natural aggregates and soils, raising significant environmental and resource sustainability concerns. In response, there is a growing need to explore alternative materials that can reduce reliance on these finite resources. Mine tailings, generated in large volumes from mining operations, have emerged as a promising substitute due to their potential to enhance asphalt concrete performance while mitigating environmental impacts associated with their disposal. This study presents a comprehensive review of the application of selected mine tailings in asphalt mixtures. It critically examines their physicochemical properties …

Case Study: Feasibility Of Creating A Simulated Mobile Data Center For Cross-Disciplinary Academic Programs, Stanley Mierzwa, Christoper J. Schultz, Iassen Christov, Michael Fagioli, Thomas Ikeda, Reinaldo Jaramillo, Giolian Sanagustin

Center for Cybersecurity

This case study examines the potential to envision, create, and deploy a simulated mobile micro data center solution that can be easily replicated and transported between locations and educational settings. The coined term for this solution is the Mobile AI-Centered Data Center (Mobile ACDC), which provides students with a platform to construct, in a hands-on fashion, such a solution and navigate the product to gain greater competencies and understanding of the components found in a data center. Instructor and student feedback assessments from the pilot classroom modules and laboratory experiential learning activities indicate that such a solution helps to improve …

From Aspiration To Obligation: A Contractual Sustainability Framework For The Egyptian Construction Industry, Salma Ali

Theses and Dissertations

The construction industry is responsible for approximately 40% of global energy consumption and 35% of total waste generation, making it one of the most significant contributors to the global sustainability challenge. In Egypt, that challenge takes a specific contractual form. Egypt’s construction sector contributes approximately 23% of national energy consumption, yet the survey findings reveal that 63.5% of construction professionals report that sustainability clauses rarely or never appear in contracts, and only 11.5% confirm the presence of enforceable provisions with measurable targets. This gap is structural rather than attitudinal. Competitive procurement penalises voluntary sustainability investment, and without contractual obligation, awareness …

Proposed Modifications To The Egyptian Concrete Code Based On A Comprehensive Sustainability Assessment Of Portland Cement Alternatives For Climate Change Mitigation, Yasmin Elhakim

Theses and Dissertations

Climate change is a major challenge facing planet earth today. This phenomenon is foreseen to continue to represent a major concern for decades to come. The construction industry is one of the most polluting sectors worldwide and is considered one of the top greenhouse gas emitters. Egypt, in particular, is one of the most vulnerable countries to the adverse effects of climate change. The construction sector plays a major role in Egypt’s economy, contributing significantly to the national GDP, yet it also represents one of the country’s largest greenhouse gas emitters. However, the Egyptian Concrete Code does not enforce the …

Towards Decarbonizing Concrete Industry In Egypt: Material Alternatives, And Economic Viability, Reem Gamal

Theses and Dissertations

The construction industry remains one of the largest contributors to global greenhouse gas emissions, with cement and steel production accounting for approximately 15% of total emissions. As global infrastructure demands continue to rise, there is an increasing need for practical tools that support low-carbon construction practices in line with international climate commitments. This research presents the development and testing of a mathematical, adaptable decision support system designed to assess both the environmental and financial impacts of material selection in concrete production. Focusing on life cycle stages A1 to A3, raw material extraction, transportation, and manufacturing, the decision support system enables …

A Proposed Model For Assessing The Impact Of Sustainable Practices On The Affordability Of Affordable Housing In Egypt Using Ahp, Ayman M Zakaria Eraqi, Omnia Nagy Abd El-Hafez, Amany Nagy Abd El-Hafez

HBRC Journal

Amid rising inflation and a housing crisis in Egypt, this research develops a model to assess the affordability of sustainable housing for low- and middle-income groups by integrating environmental, social, and economic sustainability criteria. The research methodology used Analytic Hierarchy Process (AHP) to evaluate the relative weights of sustainability criteria in housing projects. Based on their impact on construction costs, these criteria were classified by experts into five main groups: Design Criteria (preliminary studies, initial cost, environmental planning), Neighborhood Criteria (location, design, management), Social and Cultural Criteria (privacy and safety), Natural Resource Sustainability (water, energy), Housing Unit Criteria (design and …

Mine Tailings As A Sustainable Filler For Asphalt Binder–Mastics: A Review, Daniel O. Oguntayo, Nuha S. Mashaan, Sanjay K. Shukla

Research outputs 2022 to 2026

Sustainability has become a primary focus on a global scale. However, there is a threat to sustainable development due to the substantial generation of waste from urbanization and industrialization. Particularly, the accumulation of mine tailings is a problem, an industrial waste by-product from the mining sector. To support sustainable development and promote circular economy, it is imperative to utilize the materials in the production of asphalt mastics. This review examines the performance of mining waste-modified asphalt binder–mastic to create an idea of what tailings might be used for in subsequent studies. This review contributes to knowledge by consolidating research efforts …

Cost-Effectiveness Model For Reservoir Sediment Management Economics, Connor Ronald Hale

Theses and Dissertations

Reservoir sediment deposition poses a challenge to sustainable water supplies around the world. Sediment management has proven to be an expensive endeavor. Two models have been developed to guide economic analysis for reservoir sediment management, namely the Reservoir Sediment Economics Model (RSEM) and the Reservoir Conservation Model 2 (RESCON 2). While these are helpful tools for benefit-cost prefeasibility studies, they rely heavily on sometimes elusive estimations of the benefits of water supply. In this study, a new method for economic analysis is proposed that foregoes benefit-cost analysis in favor of a cost-effectiveness approach. The Sediment Management Cost-Effectiveness Model ranks sediment …

Effect Of Vehicular Electrification On Transportation Emissions In Florida, Shreya Sapkota Dhakal

Doctoral Dissertations and Master's Theses

Vehicular emissions from fuel-based passenger cars emit an array of gases and particles that are detrimental for human health and the environment. In that regard, electric vehicles (EVs) present a viable, sustainable solution. This study investigated the impact of electrification of passenger cars on air quality in Florida, in five major urban counties namely Miami-Dade, Duval, Hillsborough, Orange, and Leon. Between 2018 and 2022, these counties experienced a significant increase of 219.50 ± 52.32% in EV adoption, coupled with a 11.55 ± 6.13% decrease in fuel-based vehicle usage. Herein, we characterize five pollutants primarily generated from fuel-based passenger vehicles- carbon …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Sustainable Disposal Of Pecan Shells, Jose Carlos Carrasco

Open Access Theses & Dissertations

Urbanization acceleration has increased the consumption of natural resources and carbon footprint, pushing the need for sustainable development. Even though various construction materials are needed for infrastructure development, the most commonly used material is Ordinary Portland Cement for strength (OPC) and durability, while sand is used as a filler in the mixes prepared with OPC. The main goal of this study is to find a sustainable substitute for sand, which is locally available and currently being placed in landfills. One such material is pecan shells, and a thorough analysis of the literature led us to investigate the possible use of …

Optimizing The Sustainability Of Asphalt Pavements Through Incorporating Crumb Rubber In High-Modulus Asphalt Concrete (Hmac) Mixtures In Louisiana, Heena Dhasmana, Marwa Hassan, Mohamed Abdelmageed

Publications

Asphalt mixtures are traditionally produced using the Superpave mix design method, which emphasizes volumetric properties; however, current research is shifting toward performance-based and sustainable approaches. Within this context, the French High Modulus Asphalt Concrete (HMAC) design focuses on achieving specific performance criteria for workability, stiffness, rutting resistance, and fatigue behavior, employing a hard binder with higher asphalt content and fewer air voids than Superpave mixes. In this study, HMAC mixtures were developed using crumb rubber and locally sourced Louisiana materials. Five HMAC mixes using PG 76-22 and PG 67-22 binders with 10% and 20% crumb rubber were prepared, along with …

Challenges In Artisanal Small-Scale Gold Mining: Perspectives And Transformations To Sustainability Along Br-163 In Brazil, Carlos Henrique Xavier Araujo, Irfan Ullah, Giorgio De Tomi

Journal of Sustainable Mining

Artisanal Small-scale Gold Mining (ASGM) is a sector beset with unique and complex challenges. Recent literature highlights the growing acknowledgment of the critical need for reforms in how the ASGM industry interacts with communities and the environment. Discussions about sustainable transformations go beyond theoretical and conceptual borders, attempting to understand how local transformative events might reflect global developments. Thus, the goal of this article is to give an analysis from the perspective of the actors participating in artisanal gold mining activities. A survey was carried out along BR-163, which runs from Sinop (Mato Grosso) to Santarém (Pará). Fifty-five (55) interviews …

Techno-Economic And Eco-Friendly Msw-Based Strategy To Reduce The Impact Of Rajshahi City Electric Vehicle Power Outage In Bangladesh, Shah Tanvir Alam Rimon, Md Shahriar Mohtasim, Md Golam Kibria, Mim Mashrur Ahmed, Barun K. Das

Research outputs 2022 to 2026

Population growth, economic expansion, urbanization, and evolving consumer habits are driving a significant increase in municipal solid waste generation, placing Bangladesh under immense societal pressure to manage and dispose of this waste effectively. Numerous studies have examined municipal solid waste management practices in Bangladesh, yet the potential for utilizing the generated energy to charge electric vehicles (EVs) remains unexplored. Therefore, in this study, waste-to-energy technologies such as landfill gas recovery (LGR), incineration (INC) and anaerobic digestion (AD) were assessed for energy recovery, economic feasibility, and global warming potential in Rajshahi City Corporation, Bangladesh, to meet the extra electricity demand imposed …

The Viability Of Styrofoam Beads In Concrete Mixtures, Colin Edward Sykes

Construction Management

This experiment revolved around the idea that an aggregate replacement in a concrete mixture could not only maintain its structural integrity but increase its sustainability as well. This idea was formulated into the experiment of embedding Styrofoam beads into concrete. The outcome of this experiment showed the compressive strength of the concrete increased the greatest with the substitution of Styrofoam beads for fine aggregate up to 20%. This 20% Styrofoam replacement mixture exhibited an 189% increase in compressive strength when compared to the control group in the third week of testing. In addition to this impressive compressive strength, the weight …

The Influence Of Planning And Architectural Styles On The Sustainability Of The City Of Kumasi, Ghana, Elom Ayeke

Tanzania Journal of Engineering and Technology (TJET)

The city of Kumasi that was once dubbed the ‘Garden City of West Africa’ was founded in the late 17th century and served as the seat of government for the medieval Greater Asante Union. It later served as a commercial hub for the British Colony after undergoing massive transformation in the first two decades of the 19th century. Post-independence, the city went through various urban planning projects that mostly targeted social development. The architecture of Kumasi has also been changing through different periods of its history. This article examines the relationship between the evolution of the city of Kumasi through …

Value Of Electrical Heavy Civil Machinery In The American Construction Industry, Kaston Wong

Construction Management

Every day the construction industry is releasing an unhealthy amount of greenhouse gases into the atmosphere. The consequences may seem trivial at first because the planet is slowly deteriorating, and it is not easily discernable on a day-to-day basis; however, similar to constantly taking care of one’s home, one must take care of the planet. On the other hand, the difference between degradation of a home and planet is that the pollution released into the world is irreversible; therefore, we need to be even more conscientious of the environment. As the construction industry continues to grow, the need for heavy …

Enhancing Water Sustainability In North Africa: Literature Review And Synthesis Of Current Knowledge Gaps In Sudan, Osman M. A. Adam, Aaron R. Mittelstet, Derek M. Heeren, Troy E. Gilmore

Department of Agricultural and Biological Systems Engineering: Presentations and White Papers

This study delves into the critical role of groundwater in addressing global water challenges, with a focus on the Nubian Sandstone Aquifer System (NSAS) in North Africa. Groundwater constitutes a source of potable water, irrigation, and industrial use, especially in arid regions where surface water is limited. We analyzed the status of water quantity, withdrawals, recharge, and geological characteristics in the NSAS, specifically in Sudan, Egypt, Libya, and Chad. Though the NSAS is largely an untapped resource, we evaluated various scenarios to determine the quantity of cropland that can be sustainably irrigated. The NSAS is located in an arid region, …

A Strategic Framework For Attaining Golden Leed Certification For Resorts, Mohamad Soliman, Hadi Jawad, Mariam Younes, Oussama El Hamaoui, Saadeddine Ramadan

BAU Journal - Science and Technology

The contemporary landscape of engineering is witnessing a pivotal shift towards sustainability, encapsulated in the catchphrase "GO GREEN". This global trend underscores a strategic emphasis on sustainable design, where engineering projects prioritize a delicate balance among environmental, societal, and economic considerations.” However, a persistent challenge in construction projects lies in their tendency to neglect environmental impact, contributing to increased contamination levels. This paper aims to introduce the "Lodge in the Green" project, meticulously aligned with LEED Certification principles. LEED, or Leadership in Energy and Environmental Design, stands as the foremost green building rating system, highlighting its relevance in contemporary sustainable …

Building Services Engineering May/June 2024

Building Services Engineering

No abstract provided.

Evolving Hangwuran City Development Model Through Partial Least Square Approach In North-Central Nigeria, Samuel Medayese, Hangwelani H. Magidimisha-Chipungu, Lovemore Chipungu

CSID Journal of Infrastructure Development

The need for a paradigmatic shift in city development ideology has become increasingly evident over the years. In response to this need, the Hangwurian City Development Model was developed to establish a connection between the concepts of environmental awareness, urban governance, and management. This model also integrates sustainable urban development, urban liveability, and inclusive physical development. The research sets a critical objective of analyzing the significant levels of various indicator variables. The exploratory research utilized partial least squares (PLS) via SmartPLS to evaluate the variables, collecting quantitative data through the open data toolkit from three selected cities: Lokoja, Minna, and …

Sustainable Design And Construction With Cob, Alessandro Moya, Bailey Mclaughlin, Maddie Ly, Quinn Boardman

Civil, Environmental and Sustainable Engineering Senior Theses

Conventional building materials contribute to over 16% of global greenhouse gas emissions annually, therefore, more sustainable materials must be explored. The most readily available material is earth, cob being one of them. Cob is a monolithic earthen material made up of sand, clay, and straw, integrated using water. While this material has been used for thousands of years across the world, it is lacking research, and thus, limiting its implementation into official codes. This project tested six (6) 2’x 2’ cob walls, three (3) six (6) inch thick walls and three (3) twelve (12) inch thick walls using the ASTM …

Consumers' Acceptance To Buy And Dispose Of Recycling Textile Products, Roa Alsayed

Theses and Dissertations

The textile industry is the second most polluting worldwide, following food manufacturing. It is one of the industries that is rarely scrutinized in the Middle East and North Africa (MENA) region. This work analyzes the fashion industry from the perspective of consumer attitudes towards the purchase and disposal of clothing, and their behavior with regards to old garments. The study was conducted in Saudi Arabia and Egypt, two countries that achieved similar results in the fashion industry. The methodology is divided into three phases. First, the manuscript begins with a review of topics such as sustainability, consumer behavior in the …

Properties Of Portland Cement Concrete Incorporating Basalt-Based Pozzolanic Cement, Rana Khalil

Theses and Dissertations

Over the last decade, the world's population has increased dramatically. Due to this growth, the demand for concrete and Portland cement, in return, have increased. Manufacturing of Portland cement is an energy-intensive process that, alone, contributes to about 8% of global CO2. For decades, efforts have been exerted to reduce the harmful environmental impacts of Portland cement by reducing its use in concrete as well as considering alternate binders that may fully or partially replace it. This study aims to assess the properties of concrete incorporating a novel basalt-based pozzolanic cement. To meet this objective, four sets of concrete mixtures …

Building Services Engineering September/October 2023

Building Services Engineering

No abstract provided.

First-Generation Engineering Students' Identity Development: Early Forays Into The Workplace, Renee Smit

Research Papers

In the context of global shortages of engineering professionals, research into factors that impact on training and retention of qualified engineers is important – this includes first-generation engineering students, a largely under-researched group of students. Research has shown that an elaborated, well-developed engineering identity is important for the retention of both engineering students at university, and for engineers in practice. Professional identities are fluid, emerging and develop over the lifetime of the professional. However, we still know little about the nature of a professional engineering identity, and how it develops.

Drawing on insights from the philosophy of science, I make …

Non-Energy Circular Economy Potential Of Rice Husks: A Techno-Eco-Environmental Assessment, Winfred Oppong Yeboah

Graduate Theses and Dissertations

The non-energy circular bioeconomy potential of rice husks was examined via sustainability assessments, namely life cycle assessment (LCA), life cycle impact cost assessment (LCICA), and techno-economic assessment (TEA). The study was conducted with three objectives. The first objective was to review previous studies on the non-energy utilization potential of rice husks by the method of meta-analysis. This review followed a systematic approach where research papers were collected following a defined set of criteria. The study revealed 16 key utilization pathways, all of which showed promising results. However, a comprehensive sustainability assessment was lacking in all of the pathways. The second …

Prediction Of Terephthalic Acid Yield In Aqueous Hydrolysis Of Polyethylene Terephthalate, Hossein Abedsoltan, Zeinab Zoghi, Amir H. Mohammadi

Chemical and Biochemical Engineering Faculty Research & Creative Works

Aqueous hydrolysis is used to chemically recycle polyethylene terephthalate (PET) due to production of high-quality terephthalic acid (TPA), the PET monomer. PET hydrolysis depends on various factors including PET size, catalyst concentration, and reaction temperature. So, modeling PET hydrolysis by considering the effective factors can provide useful information for material researchers to specify how to design and run these reactions. It will save time, energy, and materials by optimizing the hydrolysis conditions. Machine learning algorithms enable to design models to predict the output results. For the first time, 381 experimental data were gathered to model aqueous hydrolysis of PET. Effective …

Neutrosophic Framework For Assessment Challenges In Smart Sustainable Cities Based On Iot To Better Manage Energy Resources And Decrease The Urban Environment's Ecological Impact, Samah Ibrahim Abdel Aal

Neutrosophic Systems with Applications

Sustainable smart cities based on the Internet of Things (IoT) technology provide promising prospects for improving quality of life. However, in order to facilitate the widespread implementation of IoT-based smart city solutions, there is a need to concern about data privacy and security, standardization, interoperability, scalability, and sustainability. Reducing the environmental effect of urban activities, optimizing the management of energy resources, and designing novel services and solutions for inhabitants are all examples of how the smart city concept is inextricably linked to sustainability. There is a need to assess challenges in smart sustainable cities based on IoT. This paper is …

System Dynamics And Topsis Models For Sustainable Building Materials Selection Considering Life Cycle Assessment, Shimaa Elshoubaky, Emad Elbeltagi, Mohammed Abd Elrahman, Islam Elmasoudi

Mansoura Engineering Journal

Construction industry is the most contributor to the environmental impacts. Achieving sustainability in construction is complicated, but one of the most optimal strategies is selecting sustainable building materials.

The major goal of this study is to present a new idea for choosing sustainable building materials (SBMs) by simulating sustainability parameters' behaviour. This research proposes a System Dynamics (SD) model along with the TOPSIS method based on the dynamic interactions among a number of sustainable criteria to help decision makers in sustainable building materials selection. The sustainable criteria that form system boundary are determined from previous studies and experts′ opinions. The …