Engineering Commons^™

Investigating The Impacts Of Conventional And Advanced Treatment Technologies On Energy Consumption At Satellite Water Reuse Plants, Jonathan Roy Bailey

UNLV Theses, Dissertations, Professional Papers, and Capstones

With the ever increasing world population and the resulting increase in industrialization and agricultural practices, depletion of two of the world's most important natural resources, water and fossil fuels, is inevitable. Water reclamation and reuse is the key to protecting these natural resources. Water reclamation using smaller decentralized wastewater treatment plants, known as satellite water reuse plants (WRP), have become popular in the last decade. With stricter standards and regulations on effluent quality and requirements for a smaller land footprint (i.e. real estate area), additional treatment processes and advanced technologies are needed. This greatly increases the energy consumption of an …

The Effectiveness Of The Use Of Solar Panels In Hotels Of Durres Area, Asllan Hajderi, Shkelqim Gjevori

UBT International Conference

In the present study is analyzing the case of the application of solar energy with vacuum tube collectors for heating water for sanitary needs in hotels of Durres areas. In recent years there has been a special interest by the leading authorities to the EU countries and the U.S., for the use of renewable energies in general and solar energy in particular. This is mainly related with the reduction of environmental pollution from gas CO2, which directly influences the greenhouse effect and global warming. Unlike other forms of renewable energy, like wind turbines, photovoltaic panels and biomass usages, the use …

Cdm Potential In Palm Solid Waste Cogeneration As An Alternative Energy In Aceh Province, Mahidin Mahidin, Izarul Machdar, Muhammad Faisal, Muhammad Nizar

Makara Journal of Technology

Empty Fruit Bunch (EFB) as a solid waste in Crude Palm Oil (CPO) industry does not utilized yet as an alternative energy source to generate electricity. It is well known that use of solid wate (biomass) as an energy source is part of the Clean Development Mechanism (CDM) scheme due to direct reduction of Green House Gases (GHGs) emission and provide a direct contribution to sustainable development. Utilization of EFB as a source of energy is very potential to be implemented in Aceh since this province has 25 CPO Mills at the moment which actively produce about 870,000 ton EFB …

Slides: Unido: Partner For Prosperity, Kandeh K. Yumkella

2012 Energy Justice Conference and Technology Exposition (September 17-18)

Presenter: Dr. Kandeh Yumkella, Chairman, UN Energy; Director General, United Nations Industrial Development Organization (UNIDO)

16 slides

Status Of Biodiesel Research And Development In Pakistan, Abdul Aziz Abdul Raman

Abdul Aziz Abdul Raman

Performance of biodiesel in engines is well established and biodiesel is currently adjudged as a low carbon fuel with the most potential of replacing fossil fuels. The fossil fuel sources are dwindling in Pakistan resulting in importation of about 8.1 million tonnes at approximately US$ 9.4 billion per annum. In the ambit of this justification, augmenting the energy scarce resources in Pakistan through intense harnessing of the varied biodiesel sources can adequately address the deficiency and can ensure energy security. Towards this end, the progress attained in biodiesel related researches in Pakistan are evaluated and presented with the view of …

Sensitivity Studies Of A Low Temperature Low Approach Direct Cooling Tower For Building Radiant Cooling Systems, Medhi Nasrabadi, Donal Finn, Ben Costelloe

Conference Papers

Recent interest in cooling towers as a mechanism for producing chilled water, together with the evolution of radiant cooling, have prompted a review of evaporative cooling in temperate maritime climates. The thermal efficiency of such systems is a key parameter, as a measure of the degree to which the system has succeeded in exploiting the cooling potential of the ambient air. The feasibility of this concept depends largely however, on achieving low approach water temperatures within an appropriate cooling tower, at acceptable levels of energy performance. Previous experimental work for a full scale evaporative cooling system has shown that it …

Using Life Cycle Assessment Methods To Guide Architectural Decision-Making For Sustainable Prefabricated Modular Buildings, Jeremy Faludi, Michael Lepech, George Loisos

Dartmouth Scholarship

Within this work, life cycle assessment modeling is used to determine top design priorities and quantitatively inform sustainable design decision-making for a prefabricated modular building. A case-study life-cycle assessment was performed for a 5,000 ft² prefabricated commercial building constructed in San Francisco, California, and scenario analysis was run examining the life cycle environmental impacts of various energy and material design substitutions, and a structural design change. Results show that even for a highly energy-efficient modular building, the top design priority is still minimizing operational energy impacts, since this strongly dominates the building life cycle's environmental impacts. However, as an …

Agenda: A Low-Carbon Energy Blueprint For The American West, University Of Colorado Boulder. Natural Resources Law Center, University Of Colorado Boulder. Renewable And Sustainable Energy Institute, Western Resource Advocates, Rocky Mountain Research Station (Fort Collins, Colo.)

A Low-Carbon Energy Blueprint for the American West (Martz Summer Conference, June 6-8)

The future of the planet may depend upon our ability to increase energy supplies even as we reduce carbon emissions. This conference will address how a low-carbon energy program might evolve with a particular focus on the American West. It will focus on the future of energy in the West--on a “managed transition” to a different energy mix, on the need to nest this effort in a framework that acknowledges interconnections, and on identifying the most salient opportunities to consider the legal, political, financial, and technical challenges.

Modeling Biofuel Production In Southern Pine Forests: The Effects On Soil Properties, Brittany L. Oakes

Honors Theses

From consuming energy alone in 2009, the United States ranked second as a carbon emitter at 5,425 million metric tons annually; China was the leader at 7,706 million metric tons and India placed third at 1,591 million metric tons (EIA, 2010). Yet in 2009, the U.S. consumed more electricity than both China and India and was the leading importer of electricity (EIA, 2010). Incorporating more domestic sources of renewable energy can simultaneously alleviate two issues: mitigating climate change catastrophes and significantly reduce our dependence on foreign markets for electricity and other forms of energy. Additionally, evidence of dwindling international oil …

Putting The Wind At Our Backs: Assessing U.S. Potential For 20% Wind Energy By 2030, Kevin T. Harnett

Honors Theses

The discussion surrounding the future of energy, particularly in the United States, has gained significant momentum in recent years for an obvious reason — it’s daunting. Our dependence on fossil fuels has positioned our nation in an undesirable predicament with a questionable future. With the associated consequences, principally Climate Change, it is essential that energy be addressed as a primary national concern. Renewables need to flip the switch.

Investigating Potential Improvements To Enhance The Performance Of A Solar Thermal Collection System: Design Of The Dual Axis Tracking System, Eric Landry

Honors Theses

Due to the current energy crisis, there are a large number of opportunities in the applications of renewable energy technologies. Specifically, my partner and I have explored those associated with a solar thermal collection dish. The sun, being a virtually limitless supply of energy, ought to be used to its fullest potential. This technology is designed to do just that. Using a concave reflective surface, the sun’s thermal energy is concentrated to a central location where it is then collected by a working fluid. This type of approach achieves very high temperatures and maximizes the effectiveness of the thermal energy …

Small-Scale Solar Central Receiver System Design And Analysis, Daniel Murray

Master's Theses

This thesis develops an analytical model of a small-scale solar central receiver power plant located at the California Polytechnic State University in San Luis Obispo, California at 35.28° N, 120.66° W. The model is used to analyze typical energy output at any time during the year. The power plant is designed to produce an output of 100 kW electrical power, and is supplemented by the combustion of natural gas. Methodologies for determining the proper size and layout of heliostats, optimal tower height, receiver size, and turbine engine selection are developed. In this specific design, solar shares of up to 73.2% …

Energy Sources And The Production Of Electricity In The United States, David Manukjan

Honors College Theses

The current sources of energy that the United States uses to produce electricity are costly, extremely damaging to the environment, and cause us to rely on other countries for our energy needs. The Obama Administration has begun working on replacing coal and oil with cleaner sources of energy. Over the last decade, alternative energy sources have been slowly gaining popularity as the American public learns more about climate change. However, the U.S. government will not use renewable energy as a complete substitute for fossil fuels in the immediate future because of their higher market price. The world is struggling to …

Bubble-Free Oxygen And Carbon Dioxide Mass Transfer In Bioreactors Using Microporous Membranes, Ravi Balgobin

Electronic Thesis and Dissertation Repository

Increasing gas-liquid mass transfer in bioreactors is a major goal for performance improvement in bioprocesses. The effects of bubble-free oxygen and carbon dioxide mass transfer using microporous membranes were tested in a flat module and a hollow fiber module for applications in a bio-fuel cell and cultivation of microalgae. The volumetric mass transfer coefficient, K_La, was compared to conventional bubbling. Liquid agitation rates influenced the mass transfer, as the limiting factor was the liquid boundary layer thickness. The K_La increased as the membrane hydrophobicity increased. The effect of pore size was found to be negligible …

Anaerobic Co-Digestion For Enhanced Renewable Energy And Green House Gas Emission Reduction, Navaneethan Navaratnam

Dissertations (1934 -)

The need to develop renewable energy is important for replacing fossil fuel, which is limited in quantity and also tends to increase in price over time. The addition of high strength organic wastes in municipal anaerobic digesters is growing and tends to increase renewable energy production. In addition, conversion of wastes to energy significantly reduces uncontrolled greenhouse gas emissions. Co-digestion of municipal sludge with any combination of wastes can result in synergistic, antagonistic or neutral outcomes. The objectives of this study were to identify potential co-digestates, determine synergistic, antagonistic and neutral effects, determine economic benefits, quantify performance of bench scale …

Slides: Natural Gas: Game Changer Or Runner Left On Base? Working To Get It Right In Co!, Gary Graham

Drawing the Blueprint for a Sustainable Natural Gas Future (January 18)

Presenter: Dr. Gary Graham, Director, Lands Program, Western Resource Advocates

21 slides

Vortex Shedding Dynamics In Long Aspect-Ratio Aerodynamics Bodies, Liu Chen

Dissertations, Master's Theses and Master's Reports - Open

The focus of the current dissertation is to study qualitatively the underlying physics of vortex-shedding and wake dynamics in long aspect-ratio aerodynamics in incompressible viscous flow through the use of the KLE method. We carried out a long series of numerical experiments in the cases of flow around the cylinder at low Reynolds numbers. The study of flow at low Reynolds numbers provides an insight in the fluid physics and also plays a critical role when applying to stalled turbine rotors. Many of the conclusions about the qualitative nature of the physical mechanisms characterizing vortex formation, shedding and further interaction …

Ecological Payback Time Of An Energy-Efficient Modular Building, Jeremy Faludi, Michael Lepech

Dartmouth Scholarship

Ecological payback time was calculated for demolishing an existing commercial building with average energy performance and replacing it with an energy-efficient, prefabricated building. A life-cycle assessment was performed for a 5,000 ft2 commercial building designed by Project Frog and prefabricated in San Francisco, California, and compared to the impacts of annual energy consumption and continued status quo operation of a comparable average commercial building. Scenarios were run both with and without rooftop solar panels intended to make the prefabricated building net zero energy. The analysis considers the materials and mof the existing building, compared to continued annual energy use of …

Plug-In Hybrid Electric Vehicle In Smart Grid, Yin Yao

Electronic Theses and Dissertations

In this thesis, in order to investigate the impact of charging load from plug-in hybrid electric vehicles (PHEVs), a stochastic model is developed in Matlab. In this model, two main types of PHEVs are defined: public transportation vehicles and private vehicles. Different charging time schedule, charging speed and battery capacity are considered for each type of vehicles. The simulation results reveal that there will be two load peaks (at noon and in evening) when the penetration level of PHEVs increases continuously to 30% in 2030. Therefore, optimization tool is utilized to shift load peaks. This optimization process is based on …

Fuzzy Logic Control For A Wind/Battery Renewable Energy Production System, Onur Özdal Mengi̇, İsmai̇l Hakki Altaş

Turkish Journal of Electrical Engineering and Computer Sciences

In this study, a designed proportional-integral (PI) controller and a fuzzy logic controller (FLC) that fix the voltage amplitude to a constant value of 380 V and 50 Hz for loads supplied from a wind/battery hybrid energy system are explained and compared. The quality of the power produced by the wind turbine is affected by the continuous and unpredictable variations of the wind speed. Therefore, voltage-stabilizing controllers must be integrated into the system in order to keep the voltage magnitude and frequency constant at the load terminals, which requires constant voltage and frequency. A fuzzy logic-based controller to be used …

High Tech High Touch: Lessons Learned From Project Haiti 2011, Yan Tang, Marc Compere, Yung Lun Wong, Jared Anthony Coleman, Matthew Charles Selkirk

Publications

In this paper, we will share our experiences and lessons learned from a design project for providing clean water to a Haitian orphanage (Project Haiti 2011). Supported by funds from a renewable energy company and the university president’s office, five engineering students and two faculty members from Embry-Riddle Aeronautical University successfully designed and installed a solar powered water purification system for an orphanage located in Chambellan, Haiti. This paper discusses the unique educational experiences gained from unusual design constraints, such as ambiguity of existing facilities due to limited communication, logistics of international construction at a remote village location, and cross-cultural …

Optimization Of Ocean Thermal Energy Conversion Power Plants, Steven Emanoel Rizea

Electronic Theses and Dissertations

A proprietary Ocean Thermal Energy Conversion (OTEC) modeling tool, the Makai OTEC Thermodynamic and Economic Model (MOTEM), is leveraged to evaluate the accuracy of finite-time thermodynamic OTEC optimization methods. MOTEM is a full OTEC system simulator capable of evaluating the effects of variation in heat exchanger operating temperatures and seawater flow rates. The evaluation is based on a comparison of the net power output of an OTEC plant with a fixed configuration. Select optimization methods from the literature are shown to produce between 93% and 99% of the maximum possible amount of power, depending on the selection of heat exchanger …