Engineering Commons^™

International Information Management And Bim Best Practice Report, Ted Mckenna, Davitt Lamon

Reports

In order to inform the Digital Leadership and Cultural Change pillar of the Build Digital, a study of international best practice in digital adoption within the built environment sector globally was undertaken and is presented here-in. In order to identify key learnings for Ireland in the context of digital transformation, eight countries were included in this study, namely, Denmark, Finland, Netherlands, Germany, United Kingdom (UK), New Zealand, Australia and Singapore. These countries were selected for various reasons, including the level of digital maturity, the scale of the built environment sector and geographic spread. Key data for each country is included …

Sustainability And Circular Economy Horizon Scan And Needs Analysis, Sadaf Dalirazar, Mark Kelly, Derek Sinnott, James O'Donnell

Reports

The construction industry plays a crucial role in addressing the climate crisis as it is the largest global consumer of raw materials and contributes significantly to global energy consumption and emissions. Considering the world’s continuous population growth and the imperative to address infrastructure and housing demands the construction sector needs to adopt further sustainable strategies in its activities to reduce the pressure on natural resources. In addition, the Architecture, Engineering, and Construction (AEC) sector is responsible for generating substantial amount of waste known as Construction and Demolition Waste (CDW), which is projected to increase due to the future construction developments. …

Digital Construction Annual Survey 2022 Report, Davitt Lamon, Ted Mckenna

Reports

The Annual Survey 2022 was conducted to assess the state of digital transformation in the Irish construction and built environment sector. This report presents the analysis of survey data, with a focus on implications for the Build Digital project and Build Digital’s five pillars: Digital Leadership & Cultural Change, Digital Standards, Digital Education & Training, Digital Procurement, and Sustainability & Circular Economy. Key findings from the survey indicated that a significant number of organisations have started their digital transformation journey, with many identifying themselves as proactive and possessing a clear business-focused strategy. However, a considerable cohort of respondents are keen …

Industry Colloquium Report, Robert Moore

Reports

In the ever-evolving landscape of the construction industry, digital transformation has emerged as a pivotal force reshaping the way projects are conceived, executed, and delivered. This transformation, fuelled by cutting-edge technology and innovative practices, holds the promise of greater efficiency, sustainability, and collaboration within the construction sector.

This report offers a comprehensive summary of the Build Digital Project colloquium. It provides actionable insights and recommendations for clients, supply chain partners, and for prioritisation within the Build Digital Project pillars. As the industry partners seek to build a more efficient, sustainable, and collaborative construction sector, understanding and harnessing the invaluable insights …

Embedding Sustainable Development In Built Environment Curricula: An Investigation Of Quantity Surveying (Qs) Education For Sustainable Development In Ireland, Roisin Murphy Dr

Conference Papers

No abstract provided.

A Global Survey Of Infection Control And Mitigation Measures For Combating The Transmission Of Covid-19 Pandemic In Buildings Under Facilities Management Services, Hadi Sarvari, Zhen Chen, Daniel W. M. Chan, Ellyn A. Lester, Nordin Yahaya, Hala Nassereddine, Aynaz Lotfata

Civil Engineering Faculty Publications

Facilities management along with health care are two important aspects in controlling the spread of infectious diseases with regard to controlling the outbreak of global COVID-19 pandemic. Hence, with the increasing outbreak of COVID-19 pandemic, the importance of examining the relationship between the built environment and the outbreak of infectious diseases has become more significant. The aim of the research described in this article is to develop effective infection control and mitigation measures to prevent the transmission of COVID-19 pandemic in the built environment. This study seeks to answer the question of how the facilities management industry can help reduce …

A Global Survey Of Infection Control And Mitigation Measures For Combating The Transmission Of Covid-19 Pandemic In Buildings Under Facilities Management Services, Hadi Savari, Zhen Chen, Daniel W. M. Chan, Ellyn A. Lester, Nordin Bin Yahaya, Hala Nassereddine, Aynaz Lotfata

Civil Engineering Faculty Publications

Facilities management along with health care are two important aspects in controlling the spread of infectious diseases with regard to controlling the outbreak of global COVID-19 pandemic. Hence, with the increasing outbreak of COVID-19 pandemic, the importance of examining the relationship between the built environment and the outbreak of infectious diseases has become more significant. The aim of the research described in this article is to develop effective infection control and mitigation measures to prevent the transmission of COVID-19 pandemic in the built environment. This study seeks to answer the question of how the facilities management industry can help reduce …

Sustainable Building, Spring/Summer 2009, Issue 20

Sustain Magazine

No abstract provided.

Our Energy Future, Fall/Winter 2007, Issue 15

Sustain Magazine

No abstract provided.

Renewable Energy, Fall/Winter 2011, Issue 23

Sustain Magazine

No abstract provided.

Active Transportation, Spring/Summer 2012, Issue 26

Sustain Magazine

No abstract provided.

Sustainable Behavior, Spring/Summer 2013, Issue 28

Sustain Magazine

No abstract provided.

Campus Sustainability, Spring/Summer 2014, Issue 30

Sustain Magazine

No abstract provided.

Carbon Neutral, Spring/Summer 2018, Issue 38

Sustain Magazine

No abstract provided.

Daylight: What Makes A Difference, M. Knoop, O. Stefani, B. Bueno, B. Matusiak, R. Hobday, A. Wirz-Justice, K. Martiny, T. Kantermann, M. Aarts, N. Zemmouri, S. Appelt, Brian Norton

Articles

Light is necessary for vision; it enables us to sense and perceive our surroundings and in many direct and indirect ways, via eye and skin, affects our physiological and psychological health. The use of light in built environments has comfort, behavioural, economic and environmental consequences. Daylight has many particular benefits including excellent visual performance, permitting good eyesight, effective entrainment of the circadian system as well as a number of acute non-image forming effects and the important role of vitamin D production. Some human responses to daylight seem to be well defined whilst others require more research to be adequately understood. …

How Bicycling Sharing System Usage Is Affected By Land Use And Urban Form: Analysis From System And User Perspectives, Ahmadreza Faghih-Imani, Naveen Eluru, Rajesh Paleti

Civil & Environmental Engineering Faculty Publications

There is a rapid growth of bicycle-sharing systems (BSS) around the world. Cities are supporting these systems as a more sustainable transport mode for short trips. Given the relatively recent adoption of BSS, there is substantial interest in understanding how these systems impact urban transportation. In this paper, we examine the functioning of the hugely successful New York City CitiBike system. We focus on the interaction of BSS with land-use and built environment attributes and the influence of weather condition and temporal characteristics on BSS usage. Towards this end, CitiBike system is analyzed along two dimensions: (1) at the system …

Transportation System And Its Association With Human Health – A Review And Modeling Approach, Fnu Zahed

Masters Theses

Transportation systems constitute of infrastructure, commute modes, land use and other policies. The purpose of transportation is to provide easy access to goods and services. While attaining this purpose, impacts of transportation on human health and well-being have been ignored to some extent. Recently, studies have begun analyzing the impact of transportation systems on quality of life and health disparities. While many studies have discussed the impact of the transportation system on individual factors from health, a very limited number of studies have focused on the impact of multiple factors associated with multiple morbidity and mortality forms. The focus of …

The Importance Of The “Local” In Walkability, Cynthia Carlson, Semra Aytur, Kevin Gardner, Shannon Rogers

Civil Engineering Faculty Publications

Transportation infrastructure and transportation behaviors consume significant natural resources and are costly to municipalities, states, and the federal government. Small cities, in particular, may find themselves with high costs. Although transportation has been extensively investigated, methods that may enable small cities to act are still lacking. To investigate the influence that neighborhood-level built environment characteristics have on adult personal transportation decisions within small cities, this study combined community-based research, a multi-level analysis of residents, and a case study approach in two (North-Eastern United States) New Hampshire cities, Portsmouth and Manchester. Neighborhood-level physical characteristics were determined using Geographic Information Systems and …

Improving Energy Efficiency And Environmental Sustainability Of Commercial Insulation, Celine F. Manoosingh, James Mihelcic, Manjriker Gunaratne

Department of Civil Engineering & Construction Faculty Research & Publications

With increasingly stringent energy standards set in place by the Department of Energy, energy efficiency is becoming a paramount concern to manufacturers of appliances. Additionally, the production and disposal of the voluminous amount of polyurethane foam commonly utilized as insulation in refrigeration units poses a significant environmental challenge. In this context, this study investigated an alternative insulation for use in commercial refrigerator/freezer units. A prototype exploring the use of evacuated packets of pyrogenic silica substituting for conventional insulation was assessed. Assessment criteria included experimental comparison of heat transfer characteristics and the energy efficiency of the new insulation as well as …

Improving Functionality And Sustainability Of Commercial Insulation: Experimental Study, Heat Transfer Modeling, Environmental Assessment, Celine Manoosingh

USF Tampa Graduate Theses and Dissertations

he Department of Energy names executing and integrating high-performance sustainable design and green building best practices a Strategic Sustainability Performance Plan goal under the Executive Order 13514 (U.S DOE, 2009). As sustainability becomes a primary

goal for engineers, a decision making framework is needed to guide their choice of materials and processes; and then to carry out the evaluation of their chosen design. Sustainable design process, and the products developed through its application, work concurrently with functionality and sustainability evaluation methodologies to cultivate a continuous loop of design, implementation, assessment and improvement. In this context, an alternative insulation prototype exploring …

Advancing The Facilities Management Process In Ireland Through The Implementation Of Building Information Modelling Within The Public Sector, Barry Mcauley, Alan V. Hore, Roger West

Conference papers

It is widely accepted that it costs up to five times more to operate and maintain a building than to construct it. Despite this statistic the Irish construction sector has done little to move towards cutting edge technologies that will help in addressing this impact on life cycle cost. This is due partly to the fact that the Irish construction sector continues to operate in a depressed state. Despite this harsh reality Ireland must find a way to create a public sector that has a more energy efficient and enhanced physical environment in which to operate without sacrificing user thermal …

Heating Effects Through Harmonic Distortion On Electric Cables In The Built Environment, Kevin O'Connell

Doctoral

Under ideal circumstances, electric power supply voltage and current waveforms should be sinusoidal. However, this is very seldom the case in the built environment, due to the proliferation of non-linear loads. Examples of non-linear loads are those containing switched mode power supplies, reactors and electronic rectifiers/inverters. Common devices such as personal computers, fluorescent lighting, electric motors, variable speed drives, transformers and reactors and virtually all other electronic equipment are examples of non-linear loads. Non-linear loads are the norm in the built environment rather than the exception. Such loads produce complex current and voltage waves and simple spectral analysis of these …

Mixed Method Collaboration In The Built Environment, Dermot Kehily

Conference papers

The built environment discipline or inter-discipline is a relatively new field in academic research. Its subject matter however is based on the traditional disciplines of the construction and property industries. Determining your ontological position and epistemological approach based on the researchparadigm of one of these fields’ may not provide an adequate solution to your research objectives.This paper outlines that framing your research within the broader confines of the built environment; drawing from related fields in an integrated manner may provide a more successful outcome.Arguments whether the built environment is an academic discipline or even the range of subjects thatmake up …

Framework For Formative Assessment Learning Strategies In Built Environment Higher Education Programmes, Lloyd Scott, Christopher Fortune

Conference papers

Formative assessment has begun to be recognized as a driving force for enhancing student learning. This paper addresses the context of Built Environment (BE) undergraduate programmes and the findings from a research project in the context of the changing Higher Education (HE) environment. The analysis of the literature on formative assessment shows that there is a common concern among the educational researchers about the function and position of assessment in HE today. The overall aim of this research is to contribute to an improvement in the quality of student learning in BE undergraduate education through the development of a theoretical …

Spatial Analysis Of Travel Behavior And Response To Traveler Information, Xin Wang

Civil & Environmental Engineering Theses & Dissertations

Transportation planners have long recognized that it is urgent to integrate emerging spatial analysis with travel behavior studies. A clearer understanding of the spatial interactions among travelers and the complex environment they face has the potential to reap benefits of the ongoing technologies of travel behavior, spatial analysis and Advanced Traveler Information Systems (ATIS).

Considering that spatial patterns have been overlooked in the literature of travel behavior and ATIS, the main objective of this research is to use robust methods of spatial analysis to enhance the understanding of how the associations between traveler decisions, built environment and socio-demographic characteristics are …

Using Virtual Reality Modelling To Enhance Electrical Safety And Design In The Built Environment., Martin Barrett

Doctoral

This thesis presents a prototype desktop virtual reality model entitled ‘Virtual Electrical Services’, to enhance electrical safety and design in the built environment. The model presented has the potential to be used as an educational tool for third level students, a design tool for industry, or as a virtual electrical safety manual for the general public. A description of the development of the virtual reality model is presented along with the applications that were developed within the model. As part of the VR development process, this research investigates the cause and effects of electrical accidents in domestic properties. This highlights …

Evaluation Of A Prototype Desktop Virtual Reality Model Developed To Enhance Electrical Safety And Design In The Built Environment, Martin Barrett, Jonathan Blackledge

Articles

The use of Desktop Virtual Reality (VR) systems for enhancing electrical safety and engineering design is a novel prospect for both practicing and student electrical services engineers. This innovative approach, which can be readily accessed via the World Wide Web, constitutes a marked shift in conventional learning and design techniques to a more immersive, interactive and intuitive working and learning environment. This paper initially identifies the unique characteristics of desktop web based VR technologies and highlights the educational affordances offered by working in such an environment. Subsequently, using a prototype model titled ‘Virtual Electrical Services’, a case study is carried …

Formative Assessment Practices In Built Environment Higher Education Programmes And The Enhancement Of The Student Learning Experience, Lloyd Scott, Chrisopher Fortune

Conference papers

It is widely accepted across Higher Education (HE) that assessment has a strong link with learning and a key factor in this link is formative assessment. Formative assessment is generally defined as an activity taking place during a programme or unit of learning with the express purpose of improving and enhancing student learning. However, there is still considerable disagreement over the roles of lecturers and students in this process. It is therefore very important to understand how lecturers in built environment (BE) undergraduate education perceive their own roles and the role of their students in using assessment strategy to deliver …

Unintended Social And Economic Consequences Resulting From The Implementation Of New Construction Technologies In The Developing World, Andrew J. South

Theses and Dissertations

One of the key components of international development is to provide adequate shelter for citizens of developing countries. This is often accomplished by governmental, non- governmental, and private organizations that seek to lower the cost, increase the quality, and expand the availability of safe, sustainable housing through the use of innovative technologies. These new technologies can affect the social and/or economic structure within communities. This paper is a case study resulting from the construction of a seventy-one-home village, including infrastructure, near Yogyakarta, Indonesia by a foreign, aid-based non-governmental organization (NGO). The village was relocated less than two kilometers from its …