Engineering Commons^™

Testing Of Two 10-Inch Insertion Propeller Flow Meters, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement accuracy testing on two 10-inch insertion (strap-on saddle) McCrometer Water Specialties propeller flow meters. Both meters were new and recently purchased by Westlands Water District. One of the meters is shown in Figure 1. Testing was performed at the ITRC Water Resources Facility (WRF) using the ITRC volumetric tank as the standard flow rate measurement for all tests. The ITRC volumetric tank was calibrated with the NIST¹-traceable ITRC gravimetric tank using …

Magnetic Flow Meter Testing, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10) and the California Department of Water Resources (Agreement No. 4600011908), the California Polytechnic State University, San Luis Obispo Irrigation Training & Research Center (ITRC) conducted testing on 4-inch and 10-inch spool-type magnetic flow meters ( also known as mag meters and electromagnetic flow meters) from six manufacturers (12 meters total). The testing was performed to assess the effects of various hydraulic conditions on meter accuracy.

Magnetic Flow Meter Testing And The Effect Of Upstream Chemical Injection On Meter Performance, Stuart Styles, Sierra Layous, Jack Evans

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) performed testing on magnetic flow meters to examine issues related to upstream chemical injection. Two sets of tests were completed:

• Meter Accuracy Testing – This testing determined the flow measurement accuracy of ten (10×) meters. Previously, all the meters had been installed in irrigation pipelines immediately downstream of chemical injection and showed significant fluctuations in flow measurement readings.

• Upstream Chemical Injection Testing – This testing quantified the variability of flow rate measurements at various …

Testing Of Two 30-Inch Magnetic Flow Meters, Stuart Styles, Jack Evans, Sierra Layous, Chad Tenbrink

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement testing on two (2×) 30inch spool-type magnetic flow meters in March of 2020. Figure 1 shows the meters installed at the testing facility. The testing determined the accuracy for each test meter in a straight pipe configuration across a range of typical water velocities (0.4 to 3.8 feet per second). Testing was performed at the ITRC Water Resources Facility (WRF) using the ITRC volumetric tank as the standard flow rate measurement for all …

Testing Of A 10 To 48-Inch Insertion Magnetic Flow Meter, Stuart Styles, Jack Evans, Sierra Layous, Chad Tenbrink

BioResource and Agricultural Engineering

With funding from the US Bureau of Reclamation, California – Great Basin Region (Region 10), the Cal Poly Irrigation Training & Research Center (ITRC) conducted flow measurement testing on one (1×) 10 to 48-inch Seametrics EX21x insertion magnetic meter (“Seametrics”, “test meter”) in April 2020. Figure 1 shows the meter installed at the testing facility. The testing determined the accuracy of the test meter in a straight pipe configuration across a range of typical water velocities (0.5 to 5.8 feet per second). Testing was performed at the ITRC Water Resources Facility (WRF) using calibrated measurements from a 30-inch Krohne Enviromag …