Engineering Commons^™

Green Up Pavement Rehabilitation Design Tool, Dragos Andrei, Robert E. Kochan, Jose H. Perez

Mineta Transportation Institute

While designers produce pavement rehabilitation recommendations every day, for projects of all sizes, most designers have little information on the environmental impact of their recommendations. This research developed a new decision tool, called the “Green Up Pavement Rehabilitation Design Tool,” to allow the comparison of different rehabilitation solutions in terms of greenhouse gas emissions and to encourage sustainable practices such as materials recycling and the use of permeable, cool, and quiet pavement surfaces. The project aligns with the major goal of California Senate Bill 1, which is “to address deferred maintenance on the state highway system and the local street …

Improving The Sustainability Of The Built Environment By Training Its Workforce In More Efficient And Greener Ways Of Designing And Constructing Through The Horizon2020 Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The construction industry consumes up to 50% of mineral resources excavated from nature, generates about 33% of CO2 present in the atmosphere and is responsible for 40% of total global energy through both construction and operation of buildings. The realisation that current pervasive construction practices now face globalization, sustainability, and environmental concerns, as well as ever-changing legislation requirements and new skills needed for the information age has resulted in technologies such as Building Information Modelling (BIM) becoming a key enabler in navigating these barriers. To assist in overcoming these barriers, a number of funding initiatives have been put in place …

Delivering Energy Savings For The Supply Chain Through Building Information Modelling As A Result Of The Horizon 2020 Energy Bimcert Project, Barry Mcauley, Avril Behan

Conference papers

The global buildings sector is now responsible for 40% of final energy consumption as well as accounting for 33% of energy-related carbon dioxide emissions. This has resulted in a growing urgency to address energy and emissions from buildings and construction, to meet restrictive 2020 targets as specified by the European Union (EU). To achieve these targets a number of funding initiatives have been put in place through Horizon 2020 with a focus on BIM, due to it having the potential to rapidly produce energy outputs that enable design teams to analyse and compare the most cost-effective, energy-efficient options. However, despite …

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Data

Corresponding data set for Tran-SET Project No. 18CTAM03. Abstract of the final report is stated below for reference:

"Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and …

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Data

Corresponding data set for Tran-SET Project No. 18STUTA01. Abstract of the final report is stated below for reference:

"This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth …

Development Of Geopolymer-Based Cement And Soil Stabilizers For Transportation Infrastructure, Miladin Radovic, Anand Puppala

Publications

Geopolymer Cement (GPC) has drawn much attention in the recent years as an alternative to Ordinary Portland Cement (OPC) for soil stabilization, pavements, bridges and other transportation structures due to their good mechanical properties in comparison to OPC. In addition, GPC can be processed at room temperatures from aqueous solutions of waste materials (e.g. fly ash) or abundant natural sources (e.g. clay), thereby significantly reducing CO2 production associated with processing of OPC. As such, GPC proves to be a more sustainable and environmentally friendly alternative than OPC. This research explores methods to develop GPC with desired properties and evaluate their …

Toward Non-Corrosion And Highly Sustainable Structural Members By Using Ultra-High-Performance Materials For Transportation Infrastructure, Shih-Ho Chao, Ashish Karmacharya

Publications

This research focused on investigating a highly sustainable and efficient reinforced concrete structural member for future infrastructure by utilizing emerging high-performance materials. These materials include ultra-high-performance fiber-reinforced concrete (UHP-FRC) and corrosion-resistant high-strength fiber-reinforced polymer (FRP) bars. Four reduced scale UHP-FRC specimens were tested under large displacement reversals to prove the proposed new ductile-concrete strong-reinforcement (DCSR) design concept by fully utilizing these ultra-high-performance materials. Micro steel fibers were incorporated into three specimens and ultra-high molecular weight polyethylene fibers were blended into the fourth specimen. One specimen with ASTM A1035 MMFX high-strength steel rebars, one with high-strength glass fiber reinforced polymer (GFRP) …

Water Productivity In Meat And Milk Production In The Us From 1960 To 2016, Mesfin Mekonnen, C.M.U. Neale, Chittaranjan Ray, Galen E. Erickson, Arjen Y. Hoekstra

Daugherty Water for Food Global Institute: Faculty Publications

Global demand for livestock products is rising, resulting in a growing demand for feed and potentially burdening freshwater resources to produce this feed. To offset this increased pressure on water resources, the environmental performance of livestock sector should continue to improve. Over the last few decades, product output per animal and feedstuff yields in the US have improved, but before now it was unclear to what extent these improvements influenced the water productivity (WP) of the livestock products. In this research, we estimate changes in WP of animal products from 1960 to 2016. We consider feed conversion ratios (dry matter …

Do Grant Funding And Pro-Environmental Spillovers Influence Household Hazardous Waste Collection?, Kustini Lim-Wavde, Robert J Kauffman, Tin Seong Kam, Gregory S. Dawsond

Research Collection School Of Computing and Information Systems

Agency and state grant funding should be disseminated in ways so it will result in better management of household hazardous waste (HHW) and environmental sustainability. Since location seems to matter in HHW collection activities, it is important to consider pro-environmental spatial spillovers that occur, based on agency actions and waste collection behavior taking place in other locations. These may influence HHW-related practices in close-by regions. Using a county-level spatio-temporal dataset that consists of economic, demographic, and HHW data in California from 2004 to 2015, we evaluate the impact of HHW grants on HHW collection activities while considering pro-environmental spillovers. We …

Employing Biomimicry In Urban Metamorphosis Seeking For Sustainability: Case Studies, M. Salim Ferwati, Maryam Alsuwaidi, Arezou Shafaghat, Ali Keyvanfar

Faculty and Research Publications

Objective: The current study has aimed to develop the framework of biomimicry involvement in urban metamorphosis for sustainability. This research has engaged four objectives to achieve the aim. Objective one is to explore the rudiment interaction between human and nature through interrogating history, nature’s design. Objective two is to excavate the biomimicry in emulating nature’s genius. Objective three is to investigate the association between biomimicry and sustainable development, focusing on architectural features. Objective four is to develop the framework based on the biomimicry rules for human evolution and survival in the natural environment. Methodology: To achieve objective one, the grounded …

Statistical Viability Analysis Of United States Air Force Estimating Cost Factor For Sustainable Construction, Philip A. Ramsey, Diedrich Prigge, Torrey J. Wagner, Alfred E. Thal Jr.

Faculty Publications

Varying legislation and executive orders coupled with needs for energy resiliency have led the United States Air Force (USAF) to pursue sustainable construction. However, the limited understanding of initial costs to implement these changes have contributed to poor project cost estimating, resulting in 62 percent of USAF projects experiencing more than 5 percent cost growth. After reviewing 1628 USAF Military Construction (MILCON) construction projects in 922 category codes (CATCODEs), a twotailed t-test for populations with unequal variance was accomplished on the final normalized contract cost for 340 projects in 16 CATCODEs executed between 2002 and 2017. This analysis provides a …

Systems Analysis For Pet And Olefin Polymers In A Circular Economy, David R. Shonnard, Emily Tipaldo, Vicki Thompson, Joshua M. Pearce, Gerard T. Caneba, Robert Handler

Michigan Tech Publications

Polyethylene terephthalate (PET #1) and polyolefin plastics such polyethylene (HDPE #2, LDPE #4) and polypropylene (PP #5) are major products from the chemical industry, and they comprise a significant fraction of municipal solid waste that ends up in landfills or as litter and marine debris. The reuse of these polymeric materials can be optimized through systems analysis with a view on materials flow analysis, techno-economics, environmental life cycle assessment, and consequential societal impacts. This contribution will present the overall research approach for this exploratory project within the DOE- and industry-funded REMADE Institute and end with a proposed systems analysis framework.

Process Sustainability Evaluation For Manufacturing Of A Component With The 6r Application, Ana E. Bonilla Hernández, Tao Lu, Tomas Beno, Claes Fredriksson, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

Sustainability in manufacturing can be evaluated at product, process and system levels. The 6R methodology for sustainability enhancement in manufacturing processes includes: reduced use of materials, energy, water and other resources; reusing of products/components; recovery and recycling of materials/components; remanufacturing of products; and redesigning of products to utilize recovered materials/resources. Although manufacturing processes can be evaluated by their productivity, quality and cost, process sustainability assessment makes it a complete evaluation. This paper presents a 6R-based evaluation method for sustainable manufacturing in terms of specific metrics within six major metrics clusters: environmental impact, energy consumption, waste management, cost, resource utilization and …

A New Era For Reuse Social Enterprises In Ireland? The Capacities Required For Achieving Sustainability, Gerard Doyle

Articles

The conventional linear relationship between production and consumption is no longer sustainable. A key component of the transition towards a more sustainable society is the continuation in use of products for longer and the development of a repair and reuse culture. Reuse social enterprises contribute to addressing a range of environmental, economic and social issues facing urban areas. This paper is concerned with, firstly, the motivations for citizens to establish reuse social enterprises in Ireland. Secondly, the paper examines the factors that contribute to reuse social enterprises in Ireland becoming sustainable.

The research points to the necessity of reuse social …

A New Era For Reuse Social Enterprises In Ireland? The Capacities Required For Achieving Sustainability, Gerard Doyle

Articles

The conventional linear relationship between production and consumption is no longer sustainable. A key component of the transition towards a more sustainable society is the continuation in use of products for longer and the development of a repair and reuse culture. Reuse social enterprises contribute to addressing a range of environmental, economic and social issues facing urban areas. This paper is concerned with, firstly, the motivations for citizens to establish reuse social enterprises in Ireland. Secondly, the paper examines the factors that contribute to reuse social enterprises in Ireland becoming sustainable.

The research points to the necessity of reuse social …

Moving Toward Prevention: Rural Water Maintenance And Sustained Service Delivery, Caleb Cord, Jeffrey P. Walters, Harold Lockwood, Pranav Chintalapati, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

This paper outlines a research plan to be conducted across the Sustainable WASH Systems (SWS) Learning consortium to learn from maintenance approaches both internal and external to the partnership. It follows a study commissioned by IRC WASH and SWS which gathered information on prominent existing approaches from key informants.

System Dynamics Modelling As A Tool For Assessing Rural Water Sustainability, Pranav Chintalapati, Jeffrey P. Walters, Amy Javernick-Will, Karl Linden

Faculty Publications - Biomedical, Mechanical, and Civil Engineering

System dynamics modelling is a tool that has been used for decades in business management and economics applications, but little focus has been applied to the WASH sector.

Specifically, this paper discusses the use of causal loop diagrams and stock flow diagrams as methods to better understand the systemic drivers affecting sustainability of rural water service delivery.

Sustainability In Higher Education: Perceptions Of Social Responsibility Among University Students, Younghan Jung, Kayoung Park, Junyong Ahn

Engineering Technology Faculty Publications

Many construction-related training and education programs in the United States have now embraced the concept of sustainability, offering sustainable construction courses that highlight sustainable design and construction practices. These courses have mainly focused on green building strategies for the design and construction of built environments and indoor environmental quality necessary for students’ knowledge enhancement and career development. This study examined the effect of sustainability course on students’ knowledge as well as their perceptions of social responsibility and sustainable behaviors. Data were collected by conducting a survey from construction related programs in U.S. universities. Students were categorized based on their experience …

Designing And Redesigning Products, Processes, And Systems For A Helical Economy, Ryan Bradley, Ibrahim S. Jawahir

Institute for Sustainable Manufacturing Faculty Publications

The Circular Economy (CE) concept has promised to unlock trillions of dollars in business value while driving a significant reduction in the world’s resource consumption and anthropogenic emissions. However, CE mainly lives in ambiguity in the manufacturing domain because CE does not address the changes needed across all of the fundamental elements of manufacturing: products, processes, and systems. Conceptually, CE is grounded in the concept of closed-loop material flows that fit within ecological limits. This grounding translates into a steady state economy, a result that is not an option for the significant portion of the world living in poverty. Therefore, …

Natural Resources Governance Employing Blockchain-Based Decision-Making, Farinaz Sabz Ali Pour, Adrian Gheorghe

Engineering Management & Systems Engineering Faculty Publications

Natural resources are essential structures of socio-economic systems which shape the well-being of humanity, environment, and the economy. Human actions have become the critical responsibility for environmental changes and pressuring many planetary boundaries. Having a systematic approach can provide a governance platform including the inherent characteristics of the resource, the historically established form of use, and transaction costs. A natural resource governance framework is developed by applying Blockchain technology as the primary goal of this study to regulate and manage the extraction and trades. Blockchain technology provides a distributed concurrency monitoring system for sustainable resource management. Persistent and pervasive cooperation …