Engineering Commons^™

Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua

Journal of System Simulation

Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.

Research On Cost-Effectiveness Analysis And Modeling Of Equipment, Yueqiang Zhao, An Shi, Mai Qiang, Yinyin Lin

Journal of System Simulation

Abstract: There are many methods to study the cost effectiveness analysis of equipment. It is very important to choose the right method and method combination . On this basis of analyzing and sorting out the research status at home and abroad, the collation and comparative study of cost estimation methods and modeling methods are carried out.The methods and classifications of effectiveness evaluation and calculating and aggregating efficiency indicators are sorted out. The methods suitable for cost-effectiveness analysis and decision-making are summarized. The characteristics of these methods in the analysis of equipment system and their applicability to engineering application are pointed …

Hvac System Energy Audit For Leverett Elementary School, Connor Smalling

Biological and Agricultural Engineering Undergraduate Honors Theses

Leverett Elementary School is located in Fayetteville, AR. The school needs significant upgrades to its infrastructure. The Fayetteville Public School District has voted to pursue an Energy Services Performance Contract (ESPC) in order to finance the desired upgrades to Leverett Elementary, among other schools in the district.

The scope of this thesis was to perform an energy audit on the existing heating, ventilation, and air conditioning (HVAC) system. By using an energy modeling software, eQuest, the building and the existing base system were modeled to determine utility consumption. Three different HVAC system alternatives were analyzed against the base system by …

A Comparison Of The Army Corps Of Engineers Hydrologic Modeling System And Autodesk Storm And Sanitary Analysis For Hydraulic And Hydrologic Analysis And Design, Foster Josef Heifetz Campbell

Master's Theses

Hydrological and hydraulic effects of urban development is one of the key issues of study for improved water management. The addition of impervious surfaces to once pervious land and re-routing open channels and flow paths can cause flooding or declining water levels within a watershed. Many studies of these issues have found that there can be multiple factors causing hydrological and hydraulic impacts, and it can be hard to analyze and develop effective solutions without appropriate drainage software packages. However, there are multiple software packages available for use, and determining the correct one to use for a specific challenge can …

Modeling And Simulation Of Missile Trajectory Based On Practical Sampling, Wu Shuai, Xiaohua Zhou, Lili Wang, Xingzhong Yao

Journal of System Simulation

Abstract: Aiming at the problem of lacking the proper simulation method for missile trajectory in combat simulation training, this paper analyzes the limitations of the 6D and 3D simulation models, proposes a method of trajectory simulation with missile kinematics model and history measured data, and taking an air-to-surface ballistic missile with midcourse-terminal guidance as an example, describes the model construction process in detail. Through the verification, validation and simulation experiments, it shows that this method can simulate various types of missile trajectory with high confidence on both sides of “red and blue”, which has an important reference meaning for missile …

The Method Of Calculating The Middle Simple Locomotive And The Train Composition In The Turnover Point Based On The Modeling In The Conditions Of A Pair Traffic Of Trains, M.N. Masharipov

Journal of Tashkent Institute of Railway Engineers

The article developed a method for calculating the average downtime of a locomotive and the composition of a train at a turnaround point based on modeling in a pair train schedule. As a result of this, it is scientifically substantiated that strict adherence to the principle “trains do not expect a locomotive” will lead to a significant increase in the cost of locomotive hours at the point of turnover

Design And Modeling Of A New Biomimetic Soft Robotic Jellyfish Using Ipmc-Based Electroactive Polymers, Zakai J. Olsen, Kwang J. Kim

Mechanical Engineering Faculty Research

Smart materials and soft robotics have been seen to be particularly well-suited for developing biomimetic devices and are active fields of research. In this study, the design and modeling of a new biomimetic soft robot is described. Initial work was made in the modeling of a biomimetic robot based on the locomotion and kinematics of jellyfish. Modifications were made to the governing equations for jellyfish locomotion that accounted for geometric differences between biology and the robotic design. In particular, the capability of the model to account for the mass and geometry of the robot design has been added for better …

Investigation Of Subsurface Stratigraphy And Groundwater Dynamics In The Mississippi River Delta, An Li

LSU Doctoral Dissertations

The Mississippi River Delta (MRD) is socioeconomically important to the state of Louisiana and the United States. Various types of land-water system data have been collected in the MRD. However, very few efforts have been made to utilize these datasets in modeling regional stratigraphy and groundwater dynamics in the MRD, especially for the upper 50 m of the depth. In this interval of depth, the Mississippi River and surrounding interdistributary bays intensively interact with the groundwater system. The lack of knowledge in regional stratigraphy and groundwater dynamics hinder an understanding of how hydrogeological setting affects processes such as surface-groundwater interaction, …

Gesture Based Control Of Semi-Autonomous Vehicles, Brian Sanders

Computational Modeling & Simulation Engineering Theses & Dissertations

The objective of this investigation is to explore the use of hand gestures to control semi-autonomous vehicles, such as quadcopters, using realistic, physics based simulations. This involves identifying natural gestures to control basic functions of a vehicle, such as maneuvering and onboard equipment operation, and building simulations using the Unity game engine to investigate preferred use of those gestures. In addition to creating a realistic operating experience, human factors associated with limitations on physical hand motion and information management are also considered in the simulation development process. Testing with external participants using a recreational quadcopter simulation built in Unity was …

Modeling And Testing Powerplant Subsystems Of A Solar Uas, Luke J. Bughman

Master's Theses

In order to accurately conduct the preliminary and detailed design of solar powered Unmanned Aerial Systems (UAS), it is necessary to have a thorough understanding of the systems involved. In particular, it is desirable to have mathematical models and analysis tools describing the energy income and expenditure of the vehicle. Solar energy income models may include available solar irradiance, photovoltaic array power output, and maximum power point tracker efficiency. Energy expenditure models include battery charging and discharging characteristics, propulsion system efficiency, and aerodynamic efficiency. In this thesis, a series of mathematical models were developed that characterize the performance of these …

Molecular Modeling Of Tethered Polyelectrolytes For Novel Biomedical Applications, Merina Jahan

Theses and Dissertations

Current research trends throughout the world focus on designing intelligent materi- als and systems for diverse applications in all courses of life. Biomaterials research encompasses a major part in this revolution due to the increased effort in fulfilling unmet medical needs to treat complex physiological and neurodegenerative disorders. Polymers play inevitable roles in these research endeavors for their ubiquitous pres- ence in biological systems. Therefore, it is crucial to understand how the polymeric molecules interact within diverse biological environments, to efficiently engineer them for various drug delivery and biosensing systems. The use of experimental design and selection of different polymers …

Modeling Neutron Interaction Inside A 2d Reactor Using Monte Carlo Method, A. S. M. Fakhrul Islam

Theses and Dissertations

Scientists and engineers have been working for many years to develop accurate approaches to analyzing nuclear power reactors using computer codes that closely model the behavior of neutrons in a reactor core. The Monte Carlo simulation method is capable of treating complex geometries with a high level of resolution and fidelity to model neutron interactions inside a reactor core. With the requirement of accurate modeling in reactor physics and dynamics and great innovation of computer technology, Monte Carlo method is becoming an ever more powerful tool and receiving rising attention. In this study, Monte Carlo method is used to model …

Gis-Based Approach For Sinkhole Occurrence Risk Mitigation In Urban Areas For Historic Wieliczka Salt Mine, Agnieszka Malinowska, Ryszard Hejmanowski

Gorniy vestnik Uzbekistana

The article presents the results of the definition of a new methodology for assessing the risk of flooding a shallow slotted mine, which was carried out on the square above the Wieliczka Salt Mine, which is a world heritage. Vertical stresses are estimated on the basis of the theoretical state of rock mass deformation in the area of test chambers. In addition, the risk for chambers indicated in the zone was calculated based on the theory of arctic pressure. The final stage of the study was spatial analysis, which led to the identification of chambers, potentially subject to the influence …

Environmental And Economic Implications Of Energy Efficiency In New Residential Buildings: A Multi-Criteria Selection Approach, Florida Solar Energy Center, Delia D'Agostino

FSEC Energy Research Center®

The choice of the most appropriate technologies in buildings is often a challenge at the design stage, especially when many different criteria are taken into account. Consequently, the decision process relies often on one criterion only, such as costs or energy savings. We propose a multi-criteria approach based on multi-attribute utility theory to assess alternative energy efficiency measures, explicitly considering both environmental and economic criteria. We apply it to the design of a new residential building in Milan (Italy), with the aim to maximize CO₂ emission savings related to electricity and gas consumption, and to minimize embodied energy and …

Analysis Of The Effects Of Dam Release Properties And Ambient Groundwater Flow On Surface Water‐Groundwater Exchange Over A 100‐Km‐Long Reach, Stephen B. Ferencz, M. Bayani Cardenas, Bethany T. Neilson

Civil and Environmental Engineering Faculty Publications

Hydroelectric dams often create highly dynamic downstream flows that promote surface water‐groundwater (SW‐GW) interactions including bank storage, the temporary storage of river water in the riverbank. Previous research on SW‐GW exchanges in dammed rivers has primarily been at single study sites, which has limited the understanding of how these exchanges evolve as dam releases travel downstream. This study evaluates how dam releases affect SW‐GW exchange continuously over a 100‐km distance. This is accomplished by longitudinally routing water releases through a synthetic river and modeling bed and bank fluid and solute exchange across transverse transects spaced along the reach. Peak and …

Cubesat Astronomy Mission Modeling Using The Horizon Simulation Framework, Alexander W. Johnson

Master's Theses

The CubeSat Astronomy Network is a proposed system of multiple CubeSat spacecraft capable of performing follow-up observations of astronomical targets of interest. The system is intended to serve as a space-borne platform that can complement existing systems utilized for astronomical research by undergraduate and high school students. Much research and development work has been performed to develop model-based system engineering methodologies and products for CubeSat missions, including the Horizon Simulation Framework. The Horizon Simulation Framework enables the development of system models using the Extended Markup Language (XML), and its simulation program can generate system simulations over model-specified timespans. System requirements …

On The Application Of Information Technology For The Development Of Software For Automation The Modeling Process Of Wagons At Wagon Enterprises Jsc "O'Zbekiston Temir Yo'llari", V.P. Bubnov, Sh. Kh. Sultonov

Journal of Tashkent Institute of Railway Engineers

The report presents a functional diagram of the developed software for calculating the values of loads acting on the wagon body. The stages of development and the main modules of a software product that implements mathematical calculations are defined. The issues of the software implementation of the presented algorithms using the object-oriented programming language C # are discussed. The performed engineering analysis using the values of loads obtained using the developed software is given. The developed program in C # language with the use of the integrated Visual Studio environment allows to increase the accuracy and reduce the time for …

Comparison Of Heat Generation Models In Finite Element Analysis Of Friction Welding, Richard Verile Livingston

Theses and Dissertations

Finite element models of friction welding can be used to estimate internal conditions of welds which are useful for weld analysis and developing experimental welding procedures. Many modeling techniques are used to accomplish these goals, each with relative strengths and weaknesses. A comparative analysis of friction welding models using different heat generation methods is presented. The three different heat generation methods examined were viscoplastic friction, constant steady-state generation, and experimentally measured power data. The models were compared against each other using three output measurements: temperature, axial force, and upset. The friction model predicted temperatures within 40 degrees C. Temperature accuracy …

Fine Sediment Modeling During Storm-Based Events In The River Bandon, Ireland, Juan T. Garcia, Joseph R. Harrington

Publications

The River Bandon located in County Cork (Ireland) has been time-continuously monitored by turbidity probes, as well as automatic and manual suspended sediment sampling. The current work evaluates three different models used to estimate the fine sediment concentration during storm-based events over a period of one year. The modeled suspended sediment concentration is compared with that measured at an event scale. Uncertainty indices are calculated and compared with those presented in the bibliography. An empirically-based model was used as a reference, as this model has been previously applied to evaluate sediment behavior over the same time period in the River …

Modeling The Economic Machine Using Bayesian Inference And Statistical Networks, And Optimal Portfolio Construction Using Operations Research, Richard Yang

ENGS 88 Honors Thesis (AB Students)

In this paper, we propose a network-based model to attempt to connect modern macroeconomic theory with real world economic observations and trends. We find that by extending macroeconomic theory with credit leveraging/deleveraging thresholds, we are able to explain economic cycles in addition to long-term growth. Furthermore, we specifically explore the growth-inflation view of the macro economy as a basis for optimal portfolio construction and efficient asset trading. Connecting our network-based macroeconomic model and our optimal portfolio construction algorithm, we create a novel macroeconomic asset-trading framework.

Modeling Of Vapor Sorption In Nanoparticle Chemiresistors, Alexandra Oliveira

Honors Scholar Theses

Chemical vapor sensors possess a number of uses in a variety of fields, from environmental and health monitoring to food safety and national security concerns, such as the detection of improvised explosive devices. Many sensors currently in the market have the ability to detect the presence of a select few compounds and measure the concentration at which the species is present. However, these types of sensors require that the vapor to be investigated is known beforehand; they cannot be used for identification except on a case by case basis. In response to this issue, one branch of vapor sensor research …

Doing A Lot With A Little: A Diagnostic Analysis Of Swmm To Simulate Hydrologic Behavior Within Lid Systems, Lucie Lynn Worthen

Theses - ALL

Low Impact Development (LID) aims to mitigate the hydrological impacts of urbanization by promoting evapotranspiration, storing and slowing the flow of water in formerly impervious areas. Green roofs, a form of LID often utilized in highly urbanized watersheds, are widely simulated using the Storm Water Management Model (SWMM). However, methods to improve diagnostic analysis of SWMM have lagged compared to other environmental disciplines. In this study, I utilize frugal diagnostic analyses to investigate potential sources of non-linearity, uncertainty, and equifinality within SWMM applied to a particular case study, the OnCenter green roof in Syracuse, New York. My findings highlight the …

Modeling And Characterization Of A Ring-Resonator Based Silicon Photonic Sensor On Silicon-On-Insulator (Soi), Gwangho Choi

Graduate Theses - Physics and Optical Engineering

The purpose of this work is to build silicon photonic devices and verify their functionalities. In particular, the structure of a ring resonator (RR) is analyzed and applied to various silicon photonic application in sensing. Silicon waveguides, grating couplers, directional couplers, and RRs are fabricated on the silicon-on-insulator (SOI) wafer. Geometrical parameters and optical properties of the silicon devices are studied and also applied to the design of the aforementioned devices. The waveguide dimensions and, optical properties of the silicon waveguide such as dispersion and effective-index are examined. The RRs are made of a series of straight and bent waveguides …

Predictive Modeling Of Fate And Transport Of Three Prevalent Contaminants In Midwest Agroecosystem Surface Waters: Nitrate-N, Atrazine, And Escherichia Coli, Samuel Hansen

Department of Agricultural and Biological Systems Engineering: Dissertations, Theses, and Student Research

The majority of streams and rivers in the United States (U.S.) are ecologically impaired, or threatened by anthropogenic stressors. Recent reports have found atrazine in drinking water to be associated with increased birth defects and incidences of Non-Hodgkin’s Lymphoma, with higher levels of significance from exposure to both atrazine and nitrate-N. In contrast, recent illnesses from E. coli contaminating vegetables that originated from irrigation water has increased awareness of identifying sources of E. coli entering irrigation reservoirs.

Methods to accurately predict atrazine and E. coli occurrence and potential sources in waterways continue to limit the identifying appropriate and effective prevention …

Modeling And Validation Of Tissue Optical Properties In The Photon Transport Regime, Katelyn Heath

Biomedical Engineering Undergraduate Honors Theses

Early detection of changes in epithelial cells, such as the development of neoplastic formations seen in epithelial dysplasia, can indicate regions of the epithelial tissue that are at a high risk for cancerous formation. Using concepts from diffuse reflectance spectroscopy, a Monte Carlo model was developed to predict the reflectance measured by a detector at a small source-detector separation on a microendoscope. The Monte Carlo results were then used to calculate a mathematical relationship between the reflectance and distance that can be used to determine optical properties in a tissue sample. This model was validated with liquid phantoms of specified …

Simulating Alternative Tuberculosis Diagnosis Methods In Underdeveloped Countries, Luke Turner

Industrial Engineering Undergraduate Honors Theses

Tuberculosis is the deadliest infectious disease in the world; it is especially rampant in underdeveloped countries because they do not have the infrastructure, technology, or funding to properly combat the infection. However, the development of portable point-of-care diagnosis machines can reverse this epidemic as they far surpass conventional laboratory identification. The question now is where to place these machines, which is a difficult decision with a lack of data. Therefore, a flexible simulation model is created to test the implementation of these machines with different countries and configurations. The simulation tests the baseline model and three proposed implementations of the …

Modeling And Timing Simulation Of Turbojet Engine Starting Process, Wang Lei, Liying Yang, Hongda Zhang, Yuqing He

Journal of System Simulation

Abstract: The turbojet engine is complicated in its starting process and requires collaboration and cooperation involving all the execution structures, thus higher demand is put forward for the control system. How to model the engine starting process, and then accurately describe and analyze the impact of actuator states on engine performance directly affect the engine control system performance. According to the working principle of the JetCat-P400 German turbojet starting process, the rotor speed mathematical model of the turbojet engine starting process is constructed by the component method. The parameters of the model are identified by combining the experimental data of …

Detection And Classification Of Vibrating Objects In Sar Images, Francisco German Perez Venegas

Electrical and Computer Engineering ETDs

The vibratory response of buildings and machines contains key information that can be exploited to infer their operating conditions and to diagnose failures. Furthermore, since vibration signatures observed from the exterior surfaces of structures are intrinsically linked to the type of machinery operating inside of them, the ability to monitor vibrations remotely can enable the detection and identification of the machinery.

This dissertation focuses on developing novel techniques for the detection and M-ary classification of vibrating objects in SAR images. The work performed in this dissertation is conducted around three central claims. First, the non-linear transformation that the micro-Doppler return …

Three-Dimensional Collagen Tubes For In Vitro Modeling, Rebecca Jones

Theses and Dissertations

Collagen type I represents a novel material for three-dimensional in vitro models. While two-dimensional models are typically inadequate for recreating the complex processes of the body, collagen provides a three-dimensional basis with a variety of applications, including remodeling of vascular cells under tension and vascular stenosis. Smooth muscle cells reorganize and reconstruct their environment differently under conditions of tensions, such as with sutures, or under conditions without applied external tension. Vascular stenosis, the abnormal narrowing of blood vessels, arises from defective developmental processes or atherosclerosis-related adult pathologies. Stenosis triggers a series of adaptive cellular responses that induces adverse remodeling, which …

Lumped Parameter Modeling And Parameter Investigation Of An Electrohydraulic Crimping Hand Tool, Eric Norquist

Master's Theses (2009 -)

A lumped parameter model of a hand-held electrohydraulic tool was developed. The tool modeled was a Milwaukee Tool M18 12 Ton Crimper. First principle approaches were used to develop state-space models for each of the subsystems in the tool. The included subsystems were the tool motor and gear train, pump, return valve, and cylinder. The subsystem models were combined into a comprehensive eleventh-order nonlinear dynamic tool model. The tool model has two inputs and three outputs. The model inputs were the motor voltage and opening the return valve. The outputs were the motor current, application time, and retraction time. Each …