Engineering Commons^™

Graphene/Polypropylene Nanocomposites, Carmen Karam Abuoudah

Theses

Graphene has been regarded as a multifunctional nanofiller for manufacturing polymer nanocomposites. A small amount of graphene nanosheets is expected to significantly improve the properties of base polymers. The property enhancement, however, is a function of the degree of exfoliation and dispersion of graphene as well as its compatibility with the polymer. The non-polar nature of polyolefins such as polyethylene (PE) and polypropylene (PP) restricts the homogeneous dispersion of graphene, leading to significant agglomeration of the nanosheets and thus, limiting the expected property improvements in polyolefins. Currently, more efforts are focused on finding strategies to improve graphene dispersion in polyolefins. …

Graphene-Fibers Hybrid Structures As Adsorbents For Heavy Metal Ions In Aqueous Solutions, Dulce C. Capitanachi

Theses and Dissertations

The project focuses on the study of graphene-fiber hybrid structures for adsorption of heavy metal ions in aqueous solutions. Polyvinyl alcohol-based graphene–fiber structures were created using centrifugal spinning and a carbonization process.

Characterization methods of the graphene–fiber hybrid structures (GFHS) include SEM, FTIR, TGA, and EDX. Single-step batch-type adsorption studies were performed to analyze the interaction of Cu (II) and Pb (II) ions onto GFHS surface. Different heavy metal ion concentrations were used, as well as a variation of pH values. Elemental analysis of the adsorbent’s surface after filtration experiments was studied by EDX and spectroscopy to verify the presence …

Gamma-Ray Radiation Effects In Graphene-Based Transistors With H-Bn Nanometer Film Substrates, E. J. Cazalas, Michael R. Hogsed, S. R. Vangala, Michael R. Snure, John W. Mcclory

Faculty Publications

Radiation effects on graphene field effect transistors (GFETs) with hexagonal boron nitride (h-BN) thin film substrates are investigated using 60Co gamma-ray radiation. This study examines the radiation response using many samples with varying h-BN film thicknesses (1.6 and 20 nm thickness) and graphene channel lengths (5 and 10 μm). These samples were exposed to a total ionizing dose of approximately 1 Mrad(Si). I-V measurements were taken at fixed time intervals between irradiations and postirradiation. Dirac point voltage and current are extracted from the I-V measurements, as well as mobility, Dirac voltage hysteresis, and the total number of GFETs that remain …

Unidirectional And Nonreciprocal Nanophotonic Devices Based On Graphene And Magneto-Optical Materials, Vahid Foroughi Nezhad

LSU Doctoral Dissertations

In this dissertation, we first introduce compact tunable spatial mode converters for graphene parallel plate (GPP) waveguides. The converters are reciprocal and based on spatial modulation of graphene’s conductivity. The wavelength of operation of the mode converters is tunable in the mid-infrared wavelength range by adjusting the chemical potential of a strip on one of the graphene layers of the GPP waveguides. We also introduce optical diodes for GPP waveguides based on a spatial mode converter and a coupler, which consists of a single layer of graphene placed in the middle between the two plates of two GPP waveguides. \par …

Microwave-Assisted Synthesis Of Graphene Supported Hexagonal Magnetite For Applications In Catalysis, Hany A. Elazab, M. A. Radwan, M. A. Sadek

Chemical Engineering

Herein, we report a rapid one-step synthetic method using microwave irradiation for growing magnetite nanocrystals on reduced graphene oxide sheets. This developed strategy allows decorating graphene sheets with magnetite nanocrystals of well-defined morphology as cubes using microwave-driven reduction of iron chloride using hydrazine hydrate as a reducing agent. The size and shape control was achieved via fine-tuning of the reaction conditions. The obtained results demonstrate the applicability of this microwave synthetic approach to control the morphology of the magnetite nanocrystals anchored on graphene sheets. Moreover, graphene sheets will enhance the nucleation and growth of magnetite nanoplates anchored on graphene. This …

Pd Nanoparticles Supported On Copper Oxide Prepared Via Microwave – Assisted Synthesis: An Efficient Catalyst For Suzuki Cross-Coupling, Hany A. Elazab Dr

Chemical Engineering

We report here a scientific investigation of a simple and versatile synthetic rote for the synthesis of palladium nanoparticles decorated with copper oxideand supported on reduced Graphene oxide (rGO) as a highly active catalyst usedfor Suzuki, Heck, and Sonogashira cross coupling reactions with remarkable turnover number (7000) and turnover frequency of 85000 h^-1. Pd-CuO nanoparticles supported on reduced Graphene oxide nanosheets (Pd-CuO/rGO) exhibited an outstanding performance through high catalytic activity towards cross coupling reactions. A simple, reproducible, and reliable method was used to prepare this efficient catalyst using microwave irradiation synthetic conditions. The synthesis approach requires simultaneous reduction …

Facile Synthesis Of Reduced Graphene Oxide-Supported Pd/Cuo Nano-Particles As An Efficient Catalyst For Cross-Coupling Reactions, Hany A. Elazab Dr

Chemical Engineering

The present communication reports a scientific investigation of a simple and versatile synthetic route for the synthesis of palladium nanoparticles decorated with copper oxide and supported on reduced graphene oxide (rGO). They are used as a highly active catalyst of Suzuki, Heck, and Sonogashira cross coupling reactions with a remarkable turnover number of 7000 and a turnover frequency of 85000 h-1. The Pd-CuO nanoparticles supported on reduced graphene oxide nanosheets (Pd-CuO/rGO) exhibit an outstanding performance through a high catalytic activity towards cross coupling reactions. A simple, reproducible, and reliable method is used to prepare this efficient catalyst using microwave irradiation …

Adhesion Of Two-Dimensional Titanium Carbides (Mxenes) And Graphene To Silicon, Yanxiao Li, Shuohan Huang, Congjie Wei, Chenglin Wu, Vadym Mochalin

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

Two-dimensional transition metal carbides (MXenes) have attracted a great interest of the research community as a relatively recently discovered large class of materials with unique electronic and optical properties. Understanding of adhesion between MXenes and various substrates is critically important for MXene device fabrication and performance. We report results of direct atomic force microscopy (AFM) measurements of adhesion of two MXenes (Ti₃C₂T_x and Ti₂CT_x) with a SiO₂ coated Si spherical tip. The Maugis-Dugdale theory was applied to convert the AFM measured adhesion force to adhesion energy, while taking into account …

Thermal Characterization Of Graphene/Polyethylene Nanocomposites, Ahmed Z. A. Abuibaid

Chemical and Petroleum Engineering Theses

Practically, almost all polymers are solidified from the melts for product-forming purposes. Therefore, the evolution of solid structure (crystallization behavior) from their molten form has prime importance in manufacturing high performance materials. Polyethylene (PE) is one of the most commonly used semi crystalline polymers all over the world. In this thesis, nanocomposites of PE with thermal reduced graphene (TRG) (PE/TRG) were prepared via solvent blending and the crystallization of PE has been investigated using a differential scanning calorimeter (DSC). The nanocomposites were crystallized from the melts under both isothermal and dynamic conditions, and evolution of crystal formation is studied using …

Surface-Enhanced Raman Detection Of Glucose On Several Novel Substrates For Biosensing Applications, Laila Saad Alqarni

Dissertations

The small normal Raman cross-section of glucose is considered to be a major challenge for its detection by Surface Enhanced Raman Spectroscopy (SERS) for medical applications. These applications include blood glucose level monitoring of diabetic patients and evaluation of patients with other medical conditions, since glucose is a marker for many human diseases. This dissertation focuses on Surface-Enhanced Raman Scattering primarily for the detection of glucose. Some experiments also are carried out for the detection of the corresponding enzyme glucose oxidase that is used in electrochemical glucose sensors and in biofuel cells. This project explores the possibility of utilizing Surface …

Electronic Transport Behavior Of Adatom- And Nanoparticle-Decorated Graphene, Jamie Anne Elias

Arts & Sciences Electronic Theses and Dissertations

To induce a non-negligible spin-orbit coupling in monolayer graphene, for the purposes of realizing the Kane-Mele Hamiltonian, transition metal adatoms have been deposited in dilute amounts by thermal evaporation in situ while holding the device temperature near 4K. Electronic transport studies including measurements such as gate voltage dependent conductivity and mobility, weak localization, high field magnetoresistance (Shubnikov de Haas oscillations), quantum Hall, and nonlocal voltage were performed at low temperature before and after sequential evaporations. Studies of tungsten adatoms are consistent with literature regarding other metal adatoms on graphene but were unsuccessful in producing a spin-orbit signature, at least partially …

Exploring The Electrical Properties Of Twisted Bilayer Graphene, William Shannon

Senior Theses

Two-dimensional materials exhibit properties unlike anything else seen in conventional substances. Electrons in these materials are confined to move only in the plane. In order to explore the effects of these materials, we have built apparatus and refined procedures with which to create two-dimensional structures. Two-dimensional devices have been made using exfoliated graphene and placed on gold contacts. Their topography has been observed using Atomic Force Microscopy (AFM) confirming samples with monolayer, bilayer, and twisted bilayer structure. Relative work functions of each have been measured using Kelvin Probe Force Microscopy (KPFM) showing that twisted bilayer graphene has a surface potential …

In Situ Chemical Probing Of Vacancy Defects In Graphene And Boron Nitride At Room Temperature, Ali Ihsan Altan

Theses and Dissertations

IN SITU CHEMICAL PROBING OF VACANCY DEFECTS IN GRAPHENE AND BORON NITRIDE AT ROOM TEMPERATURE

by

Ali Ihsan Altan

The University of Wisconsin-Milwaukee, 2019

Under the Supervision of Professor Jian Chen

Chemical vapor deposition (CVD) has emerged as the most promising technique towards manufacturing of large area, high quality graphene. Characterization, understanding, and controlling of various structural defects in CVD-grown graphene are essential to realize its true potential for real-world applications. We report a new method for in situ chemical probing of vacancy defects in CVD-grown graphene at room temperature. Our approach is based on a solid–gas phase reaction that …

Modelling Palladium Decorated Graphene Using Density Functional Theory To Analyze Hydrogen Sensing Application, Sameer Kulkarni

Mechanical Engineering Undergraduate Honors Theses

Graphene is an exciting new material with many promising applications. One such application of graphene is gas sensing, when adsorbed with transition metals, notably Palladium. Therefore, it is of paramount importance to have appropriate ab initio calculations to calculate the various properties of graphene under different adsorbates and gasses. The first step in these calculations is to have a functioning base Density Functional Theory (DFT) model of pristine graphene decorated with Palladium. The computational methods described in this paper has yielded results for pristine graphene that have been confirmed many times in previous experimental and theoretical studies. Future work needs …

Plasmonic Properties Of Nanoparticle And Two Dimensional Material Integrated Structure, Desalegn Tadesse Debu

Graduate Theses and Dissertations

Recently, various groups have demonstrated nano-scale engineering of nanostructures for optical to infrared wavelength plasmonic applications. Most fabrication technique processes, especially those using noble metals, requires an adhesion layer. Previously proposed theoretical work to support experimental measurement often neglect the effect of the adhesion layers. The first finding of this work focuses on the impact of the adhesion layer on nanoparticle plasmonic properties. Gold nanodisks with a titanium adhesion layer are investigated by calculating the scattering, absorption, and extinction cross-section with numerical simulations using a finite difference time domain (FDTD) method. I demonstrate that a gold nanodisk with an adhesive …

Evaluating The Scalability Of The Sonication Method Of Graphene Oxide Synthesis, Evan Dexter

Honors Program Projects

Graphene is a new material that was first isolated in 2004, and consists of one to a few atomic layers of carbon in a lattice sheet structure. Graphene has high tensile strength, high surface area, very low electrical resistance, and various other special properties that make it an excellent material for use in emerging technologies in the categories of electrical components, energy systems, and high strength applications. The production scale of graphene sheets and its variations is currently limited to laboratory use, with increasing research being conducted toward the development of manufacturing techniques of the material. We conducted experiments to …

In Situ Chemical Probing Of Vacancy Defects In Graphene And Boron Nitride At Room Temperature, Ali Ihsan Altan

Theses and Dissertations

IN SITU CHEMICAL PROBING OF VACANCY DEFECTS IN GRAPHENE AND BORON NITRIDE AT ROOM TEMPERATURE

by

Ali Ihsan Altan

The University of Wisconsin-Milwaukee, 2019

Under the Supervision of Professor Jian Chen

Chemical vapor deposition (CVD) has emerged as the most promising technique towards manufacturing of large area, high quality graphene. Characterization, understanding, and controlling of various structural defects in CVD-grown graphene are essential to realize its true potential for real-world applications. We report a new method for in situ chemical probing of vacancy defects in CVD-grown graphene at room temperature. Our approach is based on a solid–gas phase reaction that …

Hydrothermal Synthesis Of Graphene Supported Pd/Fe3o4 Nanoparticles As Efficient Magnetic Catalysts For Suzuki Cross – Coupling, Hany A. Elazab Dr

Chemical Engineering

This research reports a reproducible, reliable, and efficient method for preparing palladium nanoparticles dispersed on a composite of Fe3O4 and graphene as an active catalyst with high efficiency for being used in Suzuki cross – coupling reactions. Graphene supported Pd/Fe3O4 nanoparticles (Pd/Fe3O4/G) exhibit a remarkable catalytic performance towards Suzuki coupling reactions. Moreover, the prepared catalyst recyclability was up to nine times without losing its high catalytic activity. The catalyst was prepared using hydrothermal synthesis; the prepared catalyst is magnetic in order to facilitate catalyst separation out of the reaction medium after reaction completion simply through using a strong magnet. This …

Shock Compaction Of Graphene Doped Yttria Stabilized Zirconia: An Experimental And Computational Study, Christopher Rueben Johnson

Master's Theses (2009 -)

Yttria stabilized zirconia (YSZ) is a broadly used ceramic due to its impeccable hardness and thermal stability. Limitations of the material, however, subsist within its fracture toughness. Literature indicates that shock consolidation may enable production of composite YSZ and graphene mixtures with improved fracture toughness and other material properties while maintaining the material’s nanostructure dimensionality. Therefore, investigation of the compaction phenomena at non-equilibrium states will provide informative results to be used in the fabrication of bulk graphene-YSZ composites. Computational molecular dynamics (MD) simulations and impact experiments are conducted to explore and characterize the dynamic response of the YSZ variants. Molecular …

Study Of Charge Carrier Transport In Graphene And Graphite As Two Dimensional And Quasi-Two Dimensional Materials And Their Interfaces, Nalat Sornkhampan

FIU Electronic Theses and Dissertations

Evidence of superconductivity in phosphorous-doped graphite and graphene has been observed at temperatures in the vicinity of 260 K. This evidence includes transport current, magnetic susceptibility, Hall and Nernst measurements. All of these measurements indicate a transition of a type II superconductor without a phase of type I until below the limits of the measurement capabilities.

Vortex states are inferred from periodically repeated steps in the R vs. T characteristics of Highly Oriented Pyrolytic Graphite and exfoliated doped multilayer graphene. The presence of vortices has been confirmed with thermal gradient driven Nernst measurements. Magnetic susceptibility measurements have shown results qualitatively …

Thermal Transport In Layer-By-Layer Assembled Polycrystalline Graphene Films, David Estrada, Alondra Perez

Materials Science and Engineering Faculty Publications and Presentations

New technologies are emerging which allow us to manipulate and assemble 2-dimensional (2D) building blocks, such as graphene, into synthetic van der Waals (vdW) solids. Assembly of such vdW solids has enabled novel electronic devices and could lead to control over anisotropic thermal properties through tuning of inter-layer coupling and phonon scattering. Here we report the systematic control of heat flow in graphene-based vdW solids assembled in a layer-by-layer (LBL) fashion. In-plane thermal measurements (between 100 K and 400 K) reveal substrate and grain boundary scattering limit thermal transport in vdW solids composed of one to four transferred layers of …

Quantifying Thermal Boundary Conductance Of 2d–3d Interfaces, Zlatan Aksamija, Cameron J. Foss

Zlatan Aksamija

Graphene Based Functional Devices: A Short Review, Rong Wang, Xin Gang Ren, Ze Yan, Li (Lijun) Jun Jiang, Wei E.I. Sha, Guang Cun Shan

Electrical and Computer Engineering Faculty Research & Creative Works

Graphene is an ideal 2D material system bridging electronic and photonic devices. It also breaks the fundamental speed and size limits by electronics and photonics, respectively. Graphene offers multiple functions of signal transmission, emission, modulation, and detection in a broad band, high speed, compact size, and low loss. Here, we have a brief view of graphene based functional devices at microwave, terahertz, and optical frequencies. Their fundamental physics and computational models were discussed as well.

Open-Source Automated Chemical Vapor Deposition System For The Production Of Two-Dimensional Nanomaterials, Lizandra Williams-Godwin, Dale Brown, Richard Livingston, Tyler Webb, Lynn Karriem, Elton Graugnard, David Estrada

Materials Science and Engineering Faculty Publications and Presentations

The study of two- dimensional (2D) materials is a rapidly growing area within nanomaterials research. However, the high equipment costs, which include the processing systems necessary for creating these materials, can be a barrier to entry for some researchers interested in studying these novel materials. Such process systems include those used for chemical vapor deposition, a preferred method for making these materials. To address this challenge, this article presents the first open-source design for an automated chemical vapor deposition system that can be built for less than a third of the cost for a comparable commercial system. The materials and …

Chondroitin Sulfate Hydrogels For Total Wound Care Devices, Tushar Goswami

Browse all Theses and Dissertations

Chondroitin sulfate (CS) is a naturally occurring bio-polymer found in areas of high cartilage in mammals. In directed applications, such as hydrogels, CS can be used to impact keratinocyte growth cycles. In this work, CS based hydrogels were utilized to accelerate wound healing and, in conjunction with a graphene sensor, monitor wound fluid pH. The hydrogels were cast onto a graphene field effect transistor (GFET) to obtain the benefits of the hydrogel wound healing capabilities, while also utilizing the pH sensitivity of the graphene. Results showed that the hydrogel caused a fivefold increase in cell size over the course of …

Coupling Topological Insulator Snsb2te4 Nanodots With Highly Doped Graphene For High-Rate Energy Storage, Zhibin Wu, Gemeng Liang, Wei Kong Pang, Tengfei Zhou, Zhenxiang Cheng, Wenchao Zhang, Ye Liu, Bernt Johannessen, Zaiping Guo

Australian Institute for Innovative Materials - Papers

Topological insulators have spurred worldwide interest, but their advantageous properties have scarcely been explored in terms of electrochemical energy storage, and their high-rate capability and long-term cycling stability still remain a significant challenge to harvest. p-Type topological insulator SnSb2Te4 nanodots anchoring on few-layered graphene (SnSb2Te4/G) are synthesized as a stable anode for high-rate lithium-ion batteries and potassium-ion batteries through a ball-milling method. These SnSb2Te4/G composite electrodes show ultralong cycle lifespan (478 mAh g−1 at 1 A g−1 after 1000 cycles) and excellent rate capability (remaining 373 mAh g−1 even at 10 A g−1) in Li-ion storage owing to the rapid …

Synthesis, Functionalization, And Application Of Nanofiltration And Composite Membranes For Selective Separations, Andrew Steven Colburn

Theses and Dissertations--Chemical and Materials Engineering

Future nanofiltration (NF) membranes used for selective separations of ions and small organic molecules must maintain performance in environments where high concentrations of total dissolved solvents or foulants are present. These challenges can be addressed through the development of composite membranes, as well as the engineering of enhanced surface properties and operating conditions for existing commercial membranes.

In this work, ion transport through commercial thin film composite (TFC) polyamide NF membranes were studied in both lab-prepared salt solutions and industrial wastewater. The dependence of several variables on ion rejection was investigated, including ion radius, ion charge, ionic strength, and temperature. …

Effect Of Turbostratic Orientations And Confined Fluid On Mechanical Strength Of Bi-Layer Graphene: A Molecular Dynamics Study, Nil B. Dhankecha

Theses

The rise of graphene as a reinforcement material in the last decade has been exponential owing to its superior mechanical properties. This one atom thick 2D material is applicable in many industries related to nanomechanical, nanoelectronics and optical devices. Despite its strength and superior properties, single-layer graphene tends to be unstable in a free-standing form. This led to active use of bi-layer and multilayered graphene in many of the above-stated applications. Though properties of single-layer graphene have been extensively investigated both computationally as well as experimentally for over a decade, bilayer graphene and its turbostratic form are still under research. …

Dual Graphene Patch Antenna For Ka Band Satellite Applications, Mohammed Amin Rabah, Mohammed Bekhti

International Journal of Aviation, Aeronautics, and Aerospace

Currently; grapheme offers a new opportunity to use in space technology and this is due to its amazing properties like conductivity, strength, flexibility and transparency which allows us to exploit new generation of ultra-fast nanoscale components; Since future wireless communication techniques are geared towards the use of the high frequency spectrum and many recent research prove this trend. This letter presents a proposal for design of a dual graphene-based antenna to use in new communication techniques in Ka band, where the proposed antenna can work for uplink and dowlink frequencies at same time since it has return loss less then …

Polyvinylpyrrolidone - Reduced Graphene Oxide - Pd Nanoparticles As An Efficient Nanocomposite For Catalysis Applications In Cross-Coupling Reactions, Hany A. Elazab, Tamer T. El-Idreesy

Chemical and Biochemical Engineering Faculty Research & Creative Works

This paper reported a scientific approach adopting microwave-assisted synthesis as a synthetic route for preparing highly active palladium nanoparticles stabilized by polyvinylpyrrolidone (Pd/PVP) and supported on reduced Graphene oxide (rGO) as a highly active catalyst used for Suzuki, Heck, and Sonogashira cross coupling reactions with remarkable turnover number (6500) and turnover frequency of 78000 h-1. Pd/PVP nanoparticles supported on reduced Graphene oxide nanosheets (Pd-PVP/rGO) showed an outstanding performance through high catalytic activity towards cross coupling reactions. A simple, reproducible, and reliable method was used to prepare this efficient catalyst using microwave irradiation synthetic conditions. The synthesis approach requires simultaneous reduction …