Engineering Commons^™

How Degrees Of Freedom Affects Sense Of Agency, Akima Connelly, Jungsu Pak, Tian Lan, Uri Maoz

Student Scholar Symposium Abstracts and Posters

Can the rubber-hand illusion be extended to a moving robotic arm in different degrees of freedom (DOF), inducing sense of ownership & agency over the arm? We hypothesize that DOF closer to what humans possess will result in a stronger sense of ownership and agency.

Blood Glucose Predictor, Jessica Patterson

Electrical Engineering

For my senior project, I perform data analysis using statistical methods to determine body metrics that correlate with blood glucose levels. Working with Dr. Tina Smilkstein, I take repeat measurements from 6 different volunteers to establish trends in bodily metric data. The data taken includes weight, body fat, pulse rate, VO2, blood glucose, blood pressure, hours slept, and quality of sleep. Using these values, I use the program MiniTab to view results.

A few examples of correlations with blood glucose found in this project are:

• Systolic blood pressure for females had a regression line of 124.0 -0.3366*Blood Pressure. This indicates …

Single-Cell Impedance Spectroscopy, David Paul Lange

Master's Theses

Impedance spectroscopy (IS) is an important tool for cell detection and characterization in medical and food safety applications. In this thesis, the Cal Poly Biofluidics Lab’s impedance spectroscopy system was re-evaluated and optimized for single-cell impedance spectroscopy. To evaluate the IS system, an impedance spectroscopy bioMEMS chip was fabricated in the Cal Poly Microfabcrication lab, software was developed to run IS experiments, and studies were run to validate the system. To explore IS optimization, Maxwell’s mixture theorem and the Schwartz-Christoffel transform were used to calculate an analytic impedance solution to the co-planar electrode system,a novel volume fraction to account for …

Effect Of Corrective Surgery On Lower Limb Mechanics In Patients With Crouch Gait, Adelle Milholland

Boise State University Theses and Dissertations

Crouch gait a progressively degrading gait deviation associated with the neurological disorder cerebral palsy. If left untreated it can lead to anterior knee pain and a loss of ambulation. At present there exists no agreed upon metric for determining the surgical procedures used to treat crouch gait and there is insufficient means to analytically compare the results of different procedures. The aims of this thesis work were to create a pipeline to transform a patient’s gait analysis data into a finite element model, develop a model of sufficient complexity to evaluate a range of outcomes by which to judge the …

Diagnostic Sequence Detection Against A Complex Background Using A Dna Molecular Computation Framework, Adan Leon Myers Y Gutierrez

Nanoscience and Microsystems ETDs

Diagnostic assays are designed to detect a unique analyte profile in a disease of interest. Nucleic acids contain an information-dense sequence, and thus are ideal candidates for unique analytes. The gold-standard of nucleic-acid-based detection is PCR which has high sensitivity, but involves time, expertise, and cost. DNA molecular logic technology holds much promise as an alternative molecular detection method due to the potential to save cost and expertise, while also achieving a high sensitivity. However, nucleic acid detection in biomedical applications carries with it the difficulty of choice of appropriate sequence and potential biological sample background.

This work describes the …

A Framework For Evaluating Cortical Architectural Anomalies In Temporal Lobe Epilepsy Patients, Hossein Rajali

Electronic Thesis and Dissertation Repository

Focal cortical dysplasia (FCD) are localized regions of malformed cerebral cortex that are frequently associated with drug-resistant epilepsy. Currently, there is a lack of research towards providing quantitative methods for characterizing minor abnormalities in cortical architecture, hindering efforts to determine whether removal affects surgical outcome, and define potential imaging correlates. In our work, we have developed a tool to extract relevant features associated with cortical architectural abnormalities that can deal with artifacts including cortical layer distortions and morphological differences caused by cortical folding effects, and processing artifacts due to improper sectioning. This framework was applied to detect abnormalities across multiple …

Effects Of Three Dry Powder Inhalers On Deposition Of Aerosolized Medicine In The Human Oral-Pharyngeal-Laryngeal Regions, Mohammed Ali

Mohammed Ali

The dry powder inhaler (DPI) is a popular, effective and convenient drug delivery device for inhalation therapy to treat asthma. However, a large quantity (approximately 54%) of inhaled aerosols deposit in the oropharyngeal region. Deposition in this region is undesirable because it provides minimum therapeutic benefits and has adverse localized or systemic side effects. This study reports a method of examining electrostatic charge effects on deposition of three DPI aerosols (Spiriva^™ Handihaler, Advair Diskus^™, and Pulmicort^™ Turbohaler) in a cadaver-based cast of the human oral-pharyngeal-laryngeal (OPL) regions. Experimental aerosols were generated from the three commercially available …

Investigation Of Visual Perceptions In Parkinson's Disease And The Development Of Disease Monitoring Software, Matthew Bernardinis

Electronic Thesis and Dissertation Repository

Non-motor Parkinson’s Disease (PD) symptoms are substantial factors of PD arising throughout disease stages, yet their diagnosis and monitoring remain a challenge. Sensory abnormalities in PD occur across sensory systems and disease stages, contributing to disease-related impairments. However, the extent of symptoms is unknown, with inadequate monitoring and treatment options furthering disease management difficulties. The current work studies movement-independent visual perceptions of time, displacement and velocity in PD patients across disease stages using levodopa, deep brain stimulation (DBS), or no PD therapy. Perceptual tasks were conducted using a computer-generated graphical device designed with a focus on simplicity and flexibility. Perception …

Characterization Of Nano-Cellulose Based Composites For Biomedical Applications, Mitchell P. Chesley

Electronic Theses and Dissertations

The number of orthopedic surgeries performed globally has steadily increased over the past decade due to the standardization of procedures as well as technological advancements. During this time orthopedic devices have been composed predominantly of metals, such as Titanium, Vanadium, Molybdenum, and Stainless steel, as well as their alloys, due to the high strength and durability of these materials. However, metals may, in fact, be suboptimal for orthopedic devices. For example, metals exhibit Young’s modulus much greater than the surrounding bone, inducing localized stress-shielding promoting cortical atrophy, which can lead to osteoporosis. In recent years polymers have been successfully explored …

Individual Variability Of Functional Connectivity In Resting-State And Naturalistic Fmri Paradigms, Mark O'Reilly

Electronic Thesis and Dissertation Repository

Resting-state functional magnetic resonance imaging (fMRI) studies are criticized for their lack of control over cognitive states of individuals during observation, which may lead to increased variability in estimates of functional connectivity (FC). Engaging movies have been used in an attempt to synchronize the cognitive states of individuals during the scan, potentially reducing intersubject variability in connectivity estimates. The objective of this study was to investigate the differences in intersubject variability of FC between rest and movie conditions in a healthy cohort. The results demonstrate widespread reductions of intersubject variability of FC in the movie condition compared to the resting-state …

Quantifying The Outcomes Of A Virtual Reality (Vr)-Based Gamified Neck Rehabilitation, Shahan Salim

Electronic Thesis and Dissertation Repository

Neck pain is a major global public health concern and adds a significant financial burden to both the healthcare system as well as people suffering from it. Additionally, it presents measurement and evaluation challenges for clinicians as well as adherence challenges and treatment barriers for the patients. We have developed a virtual reality (VR)-based video game that can be used to capture outcomes that may aid in the assessment and treatment of neck pain. We investigated: (i) performance metrics of overall accuracy, accuracy based on movement difficulty, duration, and total envelope of movement; (ii) stability across sessions; (iii) accuracy across …

Assessment Of The Biocompatibilty, Stability, And Suitability Of Natural And Synthetic Polymers And Drugs In The Fda Approval Process, Phuong Anh Hoang Nguyen

Biomedical Engineering ETDs

Regulation of the development, production, marketing, and sales of medical pharmaceuticals and devices in the United States fall under the regulatory functions of the Food and Drug Administration (FDA). The current FDA approval process takes an average of 10 years from start to completion, and costs over $100 million. As a result, companies use many different methods to find additional use of their drugs through marketing directly to the physician, or recycling of previously approved drug moieties. In this work, an evaluation of the in vitro and ex vivo biocompatibility of polymers and drugs in different phases of FDA approval …

Design, Construction And Application Of A Home-Built, Two-Photon Microscope, William P. Breeding

Electronic Theses and Dissertations

Two-photon microscopy (TPM) is a powerful, versatile imaging modality for the study of biological systems. This thesis overviews the relevant physics involved in TPM, design considerations and process of constructing a home-built, two-photon microscope, and provides a set of procedures to operate the system. Furthermore, this work explores several applications of TPM through the study of single-cell metabolism and imaging the cellular-material interface. Explored in particular depth was the imaging of cellulose nanofiber (CNF) materials, with the goal of understanding the three-dimensional nature of fibroblast cell growth when embedded within the materials. This work uncovered several optical properties of CNF, …

Detection And Remodeling Of Toxic Amyloid Aggregates By Novel Conjugated Polyelectrolytes, Adeline Marianne Fanni

Biomedical Engineering ETDs

The abnormal misfolding and aggregation of intrinsically disordered proteins into ordered fibrillar amyloid aggregates is recognized as a common pathological event in neurodegenerative disorders (ND) such as Alzheimer’s and Parkinson’s diseases. The key role of fibrillar and pre-fibrillar aggregates in ND makes them ideal biomarkers to better understand disease progression but also for early disease detection and therapeutic intervention. The work described herein was conducted to gain a better understanding of amyloid interaction to lipid membrane and its role in peptide toxicity. This research was also focused on evaluating the fluorescent probe, oligomeric p-phenylene ethynylene (OPE), as an amyloid …

Computational Investigation Of The Interactions Between Bioactive Compounds And Biological Assemblies, Tye D. Martin

Biomedical Engineering ETDs

Small, biologically active molecules with unique properties and applications are potential solutions to a wide range of threats to global health including infectious agents and neurodegenerative disease. Experimental studies on a class of oligomeric p-phenylene ethynylenes (OPEs) have shown potential both as bioactive antimicrobials and fluorescent sensing agents for tracking amyloid-β (Aβ) aggregates found in Alzheimer’s Disease (AD). A second type of small molecule with potential applications in AD therapy, curcumin, has been found to interfere with Aβ fibril growth. Curcumin also attenuates Aβ-membrane interactions and Aβ toxicity. Our goal has been to use computational techniques to better understand the …

A Microfluidics-Based Cross-Flow Filtration Platform For Rapid Processing Of Amphiphilic Biomarkers From Blood, Kiersten D. Lenz

Biomedical Engineering ETDs

Early and accurate detection of bacterial infections can help save lives, prevent the spread of disease, and decrease the overuse of antibiotics. Our team at the Los Alamos National Laboratory has developed novel assays to detect bacterial biomarkers from patient blood at the point-of-care in order to facilitate a universal diagnostic platform. However, these biomarkers are amphiphilic in nature, and this biochemical property causes them to be sequestered by high-density and low-density lipoproteins (HDL and LDL) in the host’s blood. Extraction of the bacterial biomarkers from the lipoprotein complexes is thereby required for the development and deployment of a diagnostic …

Simulation Of A Continuum Tumor Model Using Distributed Computing., Dylan A Goodin

Electronic Theses and Dissertations

Mathematical modeling aims to provide a theoretical framework for understanding tissue dynamics and for establishing treatment response for diseased tissues, such as tumors. Previously published continuum models have successfully represented idealized two-dimensional and three-dimensional tissue for short periods of time. A recently published continuum model of cancer increases model complexity and describes three-dimensional tissue that, due to the required complexity of the geometric multigrid solver, can only be feasibly applied to millimeter-scale simulations. Furthermore, the computational cost for such models has hindered their application in the laboratory and in the clinic. With computational demands greatly outpacing current openMP-based approaches on …

The Effect Of Radial Head Hemiarthroplasty Stem Fit On Radiocapitellar Contact Mechanics: Is Loose Fit Better Than Rigidly Fixed?, Jakub Szmit, Graham J.W. King, James A. Johnson, G. Daniel G. Langohr

Western Research Forum

Background/Methods: Radial head hemiarthroplasty is commonly employed to manage comminuted displaced fractures. With regards to implant fixation, current designs vary with some prostheses aiming to achieve a tight 'fixed' fit, and others utilizing a smooth stem with an over reamed 'loose' fit. The purpose of the present study was to evaluate the effect of radial head hemiarthroplasty stem fit on radiocapitellar contact using a finite element model which simulated both fixed (size-for-size) and loose (1, 2 & 3mm over reamed) stem fits.

Hypothesis: It was hypothesized that a loose stem fit would improve radiocapitellar contact mechanics, with increased contact area …

Fibrinogen, Factor Xiii And Fibronectin: A Biophysical And Kinetic Characterization Of Their Interactions, Frank Fabian

Department of Chemical and Biomolecular Engineering: Theses and Student Research

The development of recombinant-based liquid fibrin tissue sealants having enhanced hemostatic and wound healing properties will involve understanding as yet not well characterized interactions between fibrinogen, fibrin (Fbn) factor XIII, thrombin and fibronectin. We study these phenomena in the context of comparing plasma derived fibrinogen to recombinant fibrinogen (rFI) produced in the milk of transgenic cows. An abundance of purified γγ and γγ’ FI subspecies enables detailed study of γγ or γγ’ biomonomer and their respective Fbn biopolymer formation as having different substrate behaviors of activated plasma derived factor XIII (pFXIIIa₂b₂). High pressure size exclusion (HPSEC) …

Cooking Hand Multi-Tool, Amanda D. Meares, Amy H. Wilson, Ethan G. Littlejohn, Duania A. Evans

Biomedical Engineering

The purpose of this project was to devise a solution for Jorge Segura, a US Marine who was wounded in Afghanistan and had to have his non-dominant arm amputated above the elbow. His current prosthetic attachments are not suited to cooking tasks, so he needed a way to cook more effectively with either prosthetic attachments or accessibility devices. The main tasks that he needed help with was holding down food on cutting boards and stabilizing pots, pans, and bowls especially when stirring. After background research, exploring commercially available devices, and talking with our challenger, our solution was to design three …

A 3-Dimensional In Silico Test Bed For Radiofrequency Ablation Catheter Design Evaluation And Optimization, Carolyn Teng

Master's Theses

Atrial fibrillation (AF) is the disordered activation of the atrial myocardium, which is a major cause of stroke. Currently, the most effective, minimally traumatic treatment for AF is percutaneous catheter ablation to isolate arrhythmogenic areas from the rest of the atrium. The standard in vitro evaluation of ablation catheters through lesion studies is a resource intensive effort due to tissue variability and visual measurement methods, necessitating large sample sizes and multiple prototype builds. A computational test bed for ablation catheter evaluation was built in SolidWorks® using the morphology and dimensions of the left atrium adjacent structures. From this geometry, the …

Age Dependent Regulation Of Cardiac Sodium Channel Gain Of Function, Madison Nowak, David Ryan King, Steven Poelzing, Seth Weinberg

Biology and Medicine Through Mathematics Conference

No abstract provided.

Identification And Analysis Of Behavioral Phenotypes In Autism Spectrum Disorder Via Unsupervised Machine Learning, Elizabeth Stevens, Dennis R. Dixon, Marlena N. Novack, Doreen Granpeesheh, Tristram Smith, Erik Linstead

Engineering Faculty Articles and Research

Background and objective: Autism spectrum disorder (ASD) is a heterogeneous disorder. Research has explored potential ASD subgroups with preliminary evidence supporting the existence of behaviorally and genetically distinct subgroups; however, research has yet to leverage machine learning to identify phenotypes on a scale large enough to robustly examine treatment response across such subgroups. The purpose of the present study was to apply Gaussian Mixture Models and Hierarchical Clustering to identify behavioral phenotypes of ASD and examine treatment response across the learned phenotypes.

Materials and methods: The present study included a sample of children with ASD (N = 2400), …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi S. Patel

University Scholar Projects

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Development Of A Sonically Powered Biodegradable Nanogenerator For Bone Regeneration, Avi Patel

Honors Scholar Theses

Background: Reconstruction of bone fractures and defects remains a big challenge in orthopedic surgery. While regenerative engineering has advanced the field greatly using a combination of biomaterial scaffolds and stem cells, one matter of difficulty is inducing osteogenesis in these cells. Recent works have shown electricity’s ability to promote osteogenesis in stem cell lines when seeded in bone scaffolds; however, typical electrical stimulators are either (a) externally housed and require overcomplex percutaneous wires be connected to the implanted scaffold or (b) implanted non-degradable devices which contain toxic batteries and require invasive removal surgeries.

Objective: Here, we establish a biodegradable, piezoelectric …

Fabrication And Characterization Of Collagen-Polypyrrole Constructs Using Direct-Ink Write Additive Manufacturing, Rooshan Arshad

Electronic Thesis and Dissertation Repository

Current efforts in the tissue engineering field are being directed towards the creation of platforms which will facilitate in instructing cells towards biologically relevant outcomes such as stem cell differentiation and disease pathophysiology. Traditional fabrication methods serve as a limiting factor for the production of such platforms as they lack feature and geometric complexity. Additive Manufacturing (AM) offers advantage over said methods by affording designers creative freedom and great control over printed constructs. Such constructs can then be used to create appropriate models for study- ing a plethora of tissues and structures. An AM methodology for Direct-Ink Write (DIW) printing …

The Role Of Gene Expression Noise In Mammalian Cell Survival, Kevin Farquhar

Dissertations & Theses (Open Access)

Drug resistance and metastasis remain obstacles to effective cancer treatment. A major challenge contributing to this problem is cellular heterogeneity. Even in the same environment, cells with identical genomes can display cell-to-cell differences in gene expression, also known as gene expression noise. Gene expression noise can vary in magnitude in a population or in fluctuation time scales, which is influenced by gene regulatory networks.

Currently, it is unclear how gene expression noise from gene regulatory networks contributes to drug survival outcomes in mammalian cells. An isogenic cell line with a noise-modulating genetic system tuned to the same mean is required. …

Vector Flow Imaging In Pediatric Cardiology - Extracting And Validating Data, Mason Belue

Biomedical Engineering Undergraduate Honors Theses

In the field of bedside cardiac diagnostic imaging, Doppler Ultrasound (DU) is the gold standard for diagnosing heart conditions. The largest benefit of DU is its ability to noninvasively image cardiac flow and allow the estimation of blood velocity and quantification of anatomical disease. However, to get correct velocity estimation, the position of the transducer in relation to the flow field needs to be known. This is the problem of angle/direction dependency and limits DUs accuracy when imaging in areas where perfect alignment or exact position of the transducer in relation to flow field is not possible or known, such …

Comparing The Effects Of Fibroblast Growth Factors On Growth Rate Of Human Fibroblast Cell Lines, Tasha Repella

Biomedical Engineering Undergraduate Honors Theses

Numerous studies have demonstrated the usefulness of growth factors in medium formulations to promote proliferation and viability of human fibroblasts in laboratory settings. However, due to the differences in the source and age of fibroblasts, the ability of growth factors like hFGF1 to promote proliferation varies. Equally difficult is the ability of hFGF1 to promote proliferation of diseased fibroblasts due to complexities associated with specific mitochondrial diseases. In this context, we decided to evaluate the potential for novel hyper stable growth factors super hFGF and hFGF1 (shFGF and hFGF1 respectively), to contribute to proliferation of different normal and diseased fibroblasts. …

Methods To Remotely Eliminate Biofilm From Medical Implants Using 2.4 Ghz Microwaves, Brett Glenn

Mechanical Engineering Undergraduate Honors Theses

Infections associated with biofilm growth are usually challenging to eradicate due to their high tolerance toward antibiotics [11, 12]. Biofilms often form on the inert surfaces of medically implanted devices [13]. No matter the sophistication, microbial infections can develop on all medical devices and tissue engineering constructs [12]. Related infections lead to 2 million cases annually in the U.S., costing the healthcare system over $5 billion in additional healthcare expenses [12].

Novel solutions to biofilm’s microbial colonization span the spectrum of engineering and science disciplines. Yet a practical solution still does not exist. The research presented here will explore a …