Engineering Commons^™

Air Vehicle Path Planning, Jeffrey M. Hebert

Theses and Dissertations

This dissertation explores optimal path planning for air vehicles. An air vehicle exposed to illumination by a tracking radar is considered and the problem of determining an optimal planar trajectory connecting two prespecified points is addressed. An analytic solution yielding the trajectory minimizing the received radar energy reflected from the target is derived using the Calculus of Variations. Additionally, the related problem of an air vehicle tracked by a passive sensor is also solved. Using the insights gained from the single air vehicle radar exposure minimization problem, a hierarchical cooperative control law is formulated to determine the optimal trajectories that …

Reduced Order Modeling For High Speed Flows With Moving Shocks, David J. Lucia

Theses and Dissertations

The use of Proper Orthogonal Decomposition (POD) for reduced order modeling (ROM) of fluid problems is extended to high-speed compressible fluid flows. The challenge in using POD for high-speed flows is presented by the presence of moving discontinuities in the flow field. To overcome these difficulties, a domain decomposition approach is developed that isolates the region containing the moving shock wave for special treatment. The domain decomposition implementation produces internal boundaries between the various domain sections. The domains are linked using optimization-based solvers which employ constraints to ensure smoothness in overlapping portions of the internal boundary. This approach is applied …

Acoustic Emission For Periodic Inspection Of Composite Pressure Vessels, Bao Rasebolai Mosinyi

Master's Theses - Daytona Beach

Cost savings can be achieved in a wide range of applications by replacing the current procedure for hydrostatic recertification of high-pressure composite gas cylinders with acoustic emission (AE) nondestructive testing. Advantages of AE recertification over the current hydrostatic method include: (1) no water contamination, since pressurization of the cylinders is done with air as opposed to water; (2) the risk of damage is decreased since the test pressure is reduced from 166% of design pressure to 110% of operating pressure; (3) the ability of acoustic emission to detect and locate flaws increases safety; and (4) the in-situ method will reduce …

Modeling Axisymmetric Optical Precision Piezoelectric Membranes, James W. Rogers Jr.

Theses and Dissertations

The US Department of Defense (DOD), as well as the National Aeronautics and Astronautics Administration (NASA) and the Jet Propulsion Laboratory (JPL) are interested in developing and deploying precise, compliant, light-weight, space-based structures. More specifically, the Air Force’s core competencies ‘Aerospace Superiority’ and ‘Information Superiority’ demand ever-increasing depth and breadth of capability. Whether used for energy transmission or optical reconnaissance, current launch restraints limit rigid space-based optical reflector size. To support this requirement, the Air Force Research Laboratory (AFRL) is developing a large space-based optical membrane telescope. Inflatable reflectors can conceptually break this barrier, but controlling such a compliant structure …

Low Proof Load Prediction Of Ultimate Strengths Of Fiberglass/Epoxy I-Beams Using Acoustic Emission, Edward C. Fatzinger Jr.

Master's Theses - Daytona Beach

Acoustic emission (AE) nondestructive testing was used to monitor fiberglass/epoxy I-beams. The experiment consisted of loading the I-beams in cantilever fashion with a hydraulic ram. While testing, AE waveforms were collected from the onset of loading to failure. After acquisition, the AE data from each test were filtered to include only data collected up to 50% of the theoretical ultimate load for further analysis.

A Kohonen self-organizing map was utilized to separate each individual data point (hit) into failure mechanism clusters. Then a multiple linear regression analysis was performed using the percentage of hits associated with each failure mechanism along …

Design And Construction Of A 1/3-Scale, 1986 Cessna 172p Flight-Test Aircraft, Michael J. Hinton

Master's Theses - Daytona Beach

The incredible cost of prototype flight testing can be a very limiting factor in the optimization of new designs as they proceed from the drawing board to the flight line. The use of low-cost scaled models to predict full-scale prototype performance is the focus of this project. It will be shown that by strictly following geometric and dynamic scaling criteria, the scaled aircraft's flight performance can be predictably related to the full-scale aircraft's performance. Many companies have performed scaled flight-testing of Remotely Piloted Vehicles (RPV's) and there is much speculation as to the results of these tests, but non-proprietary information …

Techniques For Reduced Order Modeling Of Aeroelastic Structures With Deforming Grids, John S. R. Anttonen

Theses and Dissertations

Reduced order modeling (ROM) seeks to make the modeling of aeroelastic behavior practical by reducing computation time for design codes. Deforming grids are often used in aeroelastic problems to account for the deformation of the structure. Proper Orthogonal Decomposition (POD/ROM) is a ROM technique that operates in an index-space for computations, not accounting for changes in grid dynamics, and must be modified to reflect grid deformation properly. To investigate and account for the effects of grid deformation on POD/ROM, a new algorithm is developed that incorporates modifications to the usual formulation. Evaluation of the new algorithm is accomplished through application …

Development Of An Integrated Sensor For The Measurement Of The Acoustic Local Volume Displacement Of Vibrating Beams, Randall Rozema

Masters Theses

Currently, the methods used for sensing the volume displacement of a vibrating structure entail the use of a polyvinylidene fluoride sensor that spans the entire length of the structure. However, this work shows that the surface behavior related to volume displacement can be measured through the use of a polyvinylidene fluoride sensor that spans only the area of interest. In this application it was shown that two-point sensors are required in addition to the distributed, polyvinylidene fluoride sensor to achieve an accurate measurement. As a result, a set of four beams with different end conditions were constructed so that the …

Transitory Forecasting Methodology: Passenger/Revenue Share And Capacity Share (The S-Curve), Marlene Marie Dugan

Master's Theses - Daytona Beach

The purpose of this descriptive study was to explore the relationship between a carrier's service/capacity share and passenger share to determine the presence of the s-curve. The author is unaware of a current, accepted analysis for understanding the s-curve with any degree of reliability. Regression analysis was used to correlate service/capacity share against passenger share for domestic, United States air carriers. Carrier ranking was then added as a predicting variable to gain further insight into the correlation between service share and passenger share. It is anticipated that this study will be beneficial to airline network planners in their analysis of …

Optimal Aeroelastic Vehicle Sensor Placement For Root Migration Flight Control Applications, Abdul Ghafoor Al-Shenhabi

Mechanical & Aerospace Engineering Theses & Dissertations

An important step in control design for elastic systems is the determination of the number and location of control system components, namely sensors. The number and placement of sensors can be critical to the robust functioning of active control systems, especially when the system of interest is a large high-speed aeroelastic vehicle. The position of the sensors affects not only system stability, but also the performance of the closed-loop system. In this dissertation, a new approach for sensor placement in the integrated rigid and vibrational control of flexible aircraft structures is developed. Traditional rigid-body augmentation objectives are addressed indirectly through …

Optimization Of Flow Quality In The Test Section Of The 30-Inch X 40- Inch Subsonic Tunnel, Ahmed F. Elnenaey

Master's Theses - Daytona Beach

The purpose of this study is to optimize the flow quality inside the 30-inch x 40-inch subsonic wind tunnel. The tunnel is an open circuit with its inlet positioned adjacent to the side door of the lab; forcing the air to make a ninety degrees turn entering the tunnel. The flow suffered from two main deficiencies, high level of turbulence and slightly unsteady flow with a non-uniform velocity distribution across the test section. By utilizing a hot-film anemometer system and a total pressure rake, turbulence and velocity distribution data were obtained. Rounded corners and a turning vane were installed in …

Solving Nonlinear Aeronautical Problems Using The Carleman Linearization Method, Brian William Gaude

Master's Theses - Daytona Beach

Many problems in aeronautics can be described in terms of nonlinear systems of equations. Carleman developed a technique to linearize such equations that could lead to analytical solutions of nonlinear problems. Nonlinear problems are difficult to solve in closed form and therefore the construction of such solutions is usually nontrivial. This thesis will apply the Carleman linearization technique to three model problems: a two-degree of-freedom (2DOF) ballistic trajectory, Blasius' boundary layer, and Van der Pol's equation and evaluate how well the technique can adequately approximate the solutions of these ordinary differential equations.

On Multifunctional Collaborative Methods In Engineering Science, Jonathan B. Ransom Sr.

Mechanical & Aerospace Engineering Theses & Dissertations

Engineers are challenged to produce better designs in less time and for less cost. Hence, to investigate novel and revolutionary design concepts, accurate, high-fidelity data must be assimilated rapidly into the design, analysis and simulation process. This data assimilation should consider diverse mathematical modeling and multi-discipline interactions necessitated by concepts exploiting advanced materials and structures. Integrated high-fidelity methods with diverse engineering applications provide the enabling technologies to assimilate these high-fidelity, multi-disciplinary data rapidly at an early stage in the design. These integrated methods must be multifunctional, collaborative and applicable to the general field of engineering science and mechanics.

Multifunctional methodologies …

Enhancing Commercial Aircraft Survivability Via Active Venting, Roger L. Veldman

Dissertations

A new technique for enhancing aircraft safety in the event of an on-board explosion was studied. The method under study employs deployable vent panels located on the fuselage which are activated by an array of pressure sensors in the aircraft interior. In the event that an explosion is detected, appropriate vent panels are rapidly released from the aircraft. This approach seeks to provide timely relief of explosive pressures within an aircraft to prevent catastrophic structural failure.

In this study, the approximate time scale of an explosive detonation and the subsequent sensing and electronic processing was determined. Then, the actuation response …

Adaptive And Reconfigurable Flight Control, Yih Shiun Huang

Theses and Dissertations

An indirect adaptive and reconfigurable flight control system is developed. The three-module controller consists of: (1) a system identification module, (2) a parameter estimate smoother, and (3) a proportional and integral compensator for tracking control. Specifically: (1) The identification of a linear discrete-time control system's open-loop gain is addressed. The classical Kalman filter theory for linear control systems is extended and the control system's state and loop gain are jointly estimated on-line. Explicit formulae for the loop gain's estimate and estimation error covariance are derived. The estimate is unbiased and the predicted covariance is reliable. (2) An adaptive smoother is …

Concept Exploration Of An Australian Indigenous Space Launch Capability, Anthony J. Rogers

Theses and Dissertations

This thesis explores the possibility of establishing an Australian indigenous space launch capability through developing and examining an Australian space launch program model. The model is based around launch site location, vehicle design, program duration, and the percentage Australian indigenous input into the program. The model was optimised in an effort maximise the benefits of such a capability, namely political prestige, security and in country technological base, while minimising the program's overall cost.

Prediction Of Pilot Induced Oscillations (Pio) Due To Activator Rate Limiting Using The Open-Loop Onset Point (Olop) Criterion, Gregory P. Gilbreath

Theses and Dissertations

Rate limiting has been a causal or contributing factor for Pilot Induced Oscillations (PIO). As part of the joint Air Force Institute of Technology/Test Pilot School (AFIT/TPS) program, an examination of the Open-Loop Onset Point (OLOP) criterion, developed by DLR German Aerospace, was conducted to see if it could predict PIO due to rate limiting and to evaluate its potential as a design tool. The criterion was applied to three previous flight test programs involving rate limiting. Findings from this analysis led to the HAVE OLOP flight test which was flown on the NF-16D Variable Stability In-flight Simulator Test Aircraft …

Modification Of Position And Attitude Determination Of A Test Article Through Photogrammetry To Account For Structural Deformation, Sean A. Krolikowski

Theses and Dissertations

This study improved the current method of position and attitude determination to account for structural deformation of the wind tunnel test article due to aerodynamic loading. To account for deformation, parabolic bending and linear twisting coefficients were added into the Levenberg-Marquardt multi-parameter solver. By accounting for deformation, the accuracy of position and attitude determination was greatly improved. This study also takes a qualitative look at the optimum number of wind tunnel cameras and model targets. Optimal configuration was found to be around 50 targets and 2 cameras offset by 90 degrees.

Quality Initiatives In The Air Force Development Of Reusable Launch Vehicles, Charles S. Galbreath

Theses and Dissertations

This thesis identifies useful tools and techniques available to aid the Air Force development of a reusable launch vehicle (RLV). These tools are identified by comparing traits found within the Lean Aerospace Initiative, Six Sigma and systems engineering. While identified specifically for the RLV effort, these tools and techniques will be of use to many development programs. Historical perspectives of both RLV development efforts within the Air Force and origins of modern quality teachings are provided to establish a common foundation of knowledge, upon which, further analysis can be conducted. This thesis, also, summarizes the current RLV effort within the …

Cooperative Behavior Schemes For Improving The Effectiveness Of Autonomous Wide Area Search Munitions, Daniel P. Gillen

Theses and Dissertations

The problem being addressed is how to best find and engage an unknown number of targets in unknown locations using multiple autonomous wide area search munitions. In this research cooperative behavior is being investigated to improve the overall mission effectiveness. A simulation was used to emulate the behavior of autonomous wide area search munitions and measure their overall expected performance. This code was modified to incorporate the capability for cooperative engagement based on a parameterized decision rule. Using Design of Experiments and Response Surface Methodologies, the simulation was run to achieve optimal decision rule parameters for given scenarios and to …

Vibration Suppression Of A Rotationally Periodic Structure Using An Adaptive/Ppf Control Law, Mark J. Keller

Theses and Dissertations

For a compressor disk, effective vibration suppression requires broadband control, and the elimination of inter-blade coupling forces. Previous researchers achieved this using an active/passive piezoelectric shunt network. Unfortunately, optimal tuning of the shunt requires prior knowledge of the coupling strength, which is not well defined. This thesis uses an adaptive parameter estimator to eliminate the inter-blade coupling forces. In addition, the passive shunt is replaced with an analogous positive position feedback method. The resulting control law was used on a simulated four and eight bladed system. While substantial reductions in system response were achieved for the Adaptive/PPF control technique, the …

Solar Radiation Pressure Modeling Issues For High Altitude Satellites, Dayne G. Cook

Theses and Dissertations

Current satellite orbit propagation techniques employ a solar radiation pressure model that makes simplifying assumptions concerning the satellite and its orbital geometry. Solar radiation pressure, a non-gravitational perturbation, significantly affects satellite motion at high altitudes. The model currently in use by the Air Force for orbit determination includes the following assumptions: a constant cross-sectional area projected to the Sun, cylindrical Earth shadow for eclipse, and specular reflection. In reality, the satellite's cross-sectional area with respect to the Sun constantly changes, the Earth's shadow is conical, and reflection is both specular and diffuse. Additionally, the solar flux received at the Earth …

Environmental Disturbance Modeling For Large Inflatable Space Structures, Donald J. Davis

Theses and Dissertations

Tightening space budgets and stagnating spacelift capabilities are driving the Air Force and other space agencies to focus on inflatable technology as a reliable, inexpensive means of deploying large structures in orbit. Recent improvements in rigidization techniques make the use these inflatable structures feasible for a growing number of missions. For many of these missions, the primary design requirement is dimensional accuracy of the structure. Finite element analysis offers a means of predicting structural behavior in orbit. The analysis requires knowledge of external loads. This thesis examines the environmental disturbances which act upon large, orbiting structures. Calculations are made on …

Rigex: Preliminary Design Of A Rigidized Inflatable Get-Away-Special Experiment, John D. Disebastian Iii

Theses and Dissertations

As space structures grow in size and complexity, their weight and cost increase considerably. The use of inflatable and rigidizable structures offers drastic improvements in all areas of spacecraft design. The goal of this experiment is to verify and validate ground testing of inflation and rigidization methods for inflatable space structures. The Rigidized Inflatable Get-Away-Special Experiment is an autonomous, self-contained space shuttle experiment that will inflate and rigidize several structures. After inflation, the experiment will perform a structural analysis by exciting the rigidized structures and collecting vibration data. A systems engineering approach is utilized to make design decisions based on …

Air Vehicle Optimal Trajectories For Radar Exposure Minimization, Michael C. Novy

Theses and Dissertations

This study addresses the problem of analyzing the single vehicle path planning problem for radar exposure minimization. The calculus of Variations and optimal control are applied to formulate the cost function and numerical algorithms are used to solve for the optimal paths. Cost sensitivity to path length is analyzed for flight against one radar; a second radar is then included in the formulation and the optimal path for flight between the radars is found for cases of equal and unequal radar power. The costs of the optimal path, direct path, and Voronoi diagram-generated paths are compared. Results indicate low sensitivity …

The Use Of Systems Engineering Processes And Tools To Develop A System Dynamic Simulation Model Of Engineering Support During The Development Phase Of An Acquisition Program, Jason E. Bartolomei

Theses and Dissertations

Due to the increase of system complexity and the existing draw down of manpower allocations, today's acquisitions environment desperately needs a systems approach to decision making. Many studies have been performed to model the entire government acquisition environment. Due to the high degree of aggregation, front line decision-makers have had no use for the information these models provide. This research focuses on the Air Force's largest functional support element in aircraft systems development, engineering. I will only consider one phase of the government acquisition cycle the Engineering, Manufacturing, and Development (EMD). This is the development cycle, which begins with initial …

Estimation Of Relative Satellite Formation Elements In Near Circular Orbits, Ralph E. Bordner Iii

Theses and Dissertations

Precise relative position determination of satellite formation elements in near circular orbits is the focus of this thesis. A Bayes filter is used for the estimator with the dynamics solution obtained by solving the time periodic, linearized system via Floquet theory. This approach is similar to that of the traditional Clohessy-Wiltshire treatment, however much more of the system's behavior is retained by using a linear, time periodic system. The dynamics model includes all zonal harmonics of the Earth as well as sectoral, tesseral, and air drag perturbations. The filter algorithm was fed three types of simulated measurements: relative Carrier-Phases Differential …

Turbine Blade Surface Roughness Effects On Shear Drag And Heat Transfer, Jess W. Drab

Theses and Dissertations

This work used scaled samples of actual turbine blade surfaces to characterize correlations between turbine surface roughness, friction coefficient, and convective heat transfer rate-parameters which affect an engine's efficiency and the blade's lifespan. For erosion/deposits, friction coefficients up to 250 times higher and convective heat transfer coefficients of up to 150 times higher were found when compared to a flat plate baseline. Other roughness types (pitting and fuel deposits) yielded less dramatic results. These results did not follow existing friction coefficient-to-heat transfer coefficient correlations, such as the Reynolds analogy. While these analytical and empirical correlations hold for flat plates, they …

Analysis Of The Application Of A Triggered Isomer Heat Exchanger As A Replacement For The Combustion Chamber In An Off-The-Shelf Turbojet, Carl R. Hartsfield

Theses and Dissertations

The objective of this research was to evaluate the feasibility of using the triggered decay of a radioactive isomer in a solid-state heat exchanger to power a gas turbine engine. Primary performance measures were stagnation temperature increase and stagnation pressure drop across the heat exchanger. Analysis was performed using commercial software, and explored three types of heat exchanger: concentric tubes, radial fins with constant spacing, and radial fins with constant thickness. All met or exceeded performance of the baseline J-57 turbojet engine at static sea level conditions. A single configuration of heat exchanger, using concentric tubes, was evaluated at typical …

Development And Testing Of A Multiple Filter Approach For Precise Dgps Positioning And Carrier-Phase Ambiguity Resolution, Paul E. Henderson

Theses and Dissertations

The most precise relative positioning obtained using differential GPS depends on accurately determining carrier-phase integer ambiguities. To achieve high precision, many current static and kinematic algorithms use a floating-point solution until enough information becomes available to fix the carrier-phase ambiguities accurately. A mew method is presented that uses a multiple model Kalman filter to resolve the carrier-phase integer ambiguities. This method starts with the floating-point results, yet smoothly and rapidly attains the precision of the correct fixed-integer solution, eliminating the need to decide when to switch from the floating to the fixed-integer solution. This method is based on a theoretically …