Engineering Commons^™

An Integrated Experimental And Modeling Approach To Design Rotating Algae Biofilm Reactors (Rabrs) Via Optimizing Algae Biofilm Productivity, Nutrient Recovery, And Energy Efficiency, Gerald Benjamin Jones

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Microalgae biofilms have been demonstrated to recover nutrients from wastewater and serve as biomass feedstock for bioproducts. However, there is a need to develop a platform to quantitatively describe microalgae biofilm production, which can provide guidance and insights for improving biomass areal productivity and nutrient uptake efficiency. This paper proposes a unified experimental and theoretical framework to investigate algae biofilm growth on a rotating algae biofilm reactor (RABR). The experimental laboratory setups are used to conduct controlled experiments on testing environmental and operational factors for RABRs. We propose a differential-integral equation-based mathematical model for microalgae biofilm cultivation guided by laboratory …

Historic Downtown Streetscape Plan Price City, Utah, Patricia Beckert

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The idea of a small-town Main Street has profound meaning within the American culture that has prevailed for the past two centuries. Historically, Main Street serves as the beating heart of a community, a place where economic, social, cultural, and civic activities are centered (Francaviglia, 1996; Main Street America, n.d.). Since the beginning of the 19th century, many factors have led to the decline of Main Streets, and despite a variety of efforts from different stakeholders, that decline has only intensified in recent decades (Isenberg, 2008; Orvell, 2014 Howard, 2015). In 1980, after a three-year project conducted by the National …

Development Of An Excel Model To Evaluate The Stability Of Slopes, Bradley Davis

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This objective of this study is to determine a method or tool for taking given slope stability parameters and quickly and effectively determining the factor of safety against sliding of fully softened slopes. This study evaluates the effects of soil and geometric parameters of common slopes, and models these properties in a hypothetical model. The methodology is based on a parametric analysis using the Spencer’s Method of Slices limit equilibrium analysis used in the computer program Slide2. A parametric analysis is performed to determine which soil and/or geometric properties have a high influence on slope stability. The parametric analysis is …

Effects Of Imu Sensor Location And Number On The Validity Of Vertical Acceleration Time-Series Data In Countermovement Jumping, Dianne Althouse

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Many devices are available for measuring the height of a CMJ. An inertial measurement unit (IMU) measures linear acceleration, orientation, and angular velocity. As an alternative to using IMU estimates of flight time, CMJ height could be estimated by integrating the IMU time-series signal for vertical acceleration to derive CMJ take-off velocity in order to track whole-body center of mass (WBCoM) movement, yet this approach would require valid IMU acceleration data. Thus, the purpose of this study was to quantify the effects of IMU sensor location and number on the validity of vertical acceleration estimation in CMJ. Thirty young adults …

Airframe And Systems Design, Analysis, And Testing Of The Horizon Morphing-Wing Aircraft, Sabrina A. Snow

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Morphing trailing edge technology can provide the ability to dynamically alter the twist distribution, and therefore lift distribution, of an aircraft during flight. There are certain optimal lift distributions which can be chosen to create proverse yawing effects and eliminate the need for vertical control surfaces. The purpose of this project is to support the design and testing of a morphing, crescent flying wing airframe which will be used to evaluate yaw control in an aircraft without vertical control surfaces. There are three main objectives of this project, which are to perform static and dynamic analysis on the crescent wing …

Methane Emission Treatment And Potential Upcycling Using Methylomicrobium Alcaliphilum, Jace Parkinson

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Anthropogenic methane emissions are harmful to the environment and can be difficult to treat. Use of M. alcaliphilum for bioremediation of methane looks to be one of the most promising methods of reducing the negative environmental impacts of methane emissions while simultaneously providing an economic incentive. Successful bioreactor design for M. alcaliphilum based methane treatment requires biokinetic constants and microbial growth information. Methods were established for determining biokinetic constants, including growth rate, biomass yield, specific methane consumption rate, and a correlation between methane oxidation and carbon dioxide production for M. alcaliphilum. Values determined for these constants were used to …

Effects Of Flow Path Factors In The Permeability Of Natural And Man-Made Granular Soils Using The Kozeny-Carman Equation, Robert Davies

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The research presented in this paper serves to observe how the flow path factors relate to the void ratio, the effective diameter of a soil particle, and the permeability of a given sample assuming the behavior is consistent across natural and artificial soils. The basis of the comparison is the derived Kozeny-Carman Equation for permeability with focus on the factors C_s and C_l where C_s represents the shape of the flow path and C_l represents the length of the flow path that a single water molecule must travel through a soil sample. Permeameter tests were conducted …

Testing Methods Of Surficial Sinkhole Identification Using Remotely Sensed Data, Dane P. Brophy

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Nearly a quarter of all people rely on karst aquifers for drinking water. In the United States, the Safe Water Drinking Act requires a complete assessment of public water systems' vulnerabilities to contamination. As part of that assessment, watershed boundaries must be delineated, while recharge and supply locations identified. In the context of karst aquifers, surficial karst features, such as sinkholes, can act as a point source of direct recharge to karst aquifers and create vulnerabilities to critical drinking water sources. Historical methods of locating these features are inefficient and depend on basic field investigations, resulting in a clear need …

A Review Of Harmful Algal Bloom Prediction Models For Lakes And Reservoirs, Jade Snyder Echard

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Anthropogenic activity has led to eutrophication in water bodies across the world. This eutrophication promotes blooms, cyanobacteria being among the most notorious bloom organisms. Cyanobacterial blooms (more commonly referred to as harmful algal blooms (HABs)) can devastate an ecosystem. Cyanobacteria are resilient microorganisms that have adapted to survive under a variety of conditions, often outcompeting other phytoplankton. Some species of cyanobacteria produce toxins that ward off predators. These toxins can negatively affect the health of the aquatic life, but also can impact animals and humans that drink or come in contact with these noxious waters. Although cyanotoxin’s effects on humans …

Hardware Implementations Of Ccsds Deep Space Ldpc Codes For A Satellite Transponder, Dana R. Sorensen

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Error-correction coding is a technique that adds mathematical structure to a message, allowing corruptions to be detected and corrected when the message is received. This is especially important for deep space satellite communications, since the long distances and low signal power levels often cause message corruption. A very strong type of error-correction coding known as LDPC codes was recently standardized for use with space communications. This project implements the encoding and decoding algorithms required for a small satellite radio to be able to use these LDPC codes. Several decoder architectures are implemented and compared by their performance, speed, and complexity. …

Impacts Of Beaver Dams On Mountain Stream Discharge And Water Temperature, Timothy R. Clark

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Beaver dam complexes have been shown to affect the hydrologic processes controlling river systems. These processes include surface and groundwater exchanges, water chemistry and temperature variations, and river discharge magnitudes. Majerova et al. (2015) explored the effects of beaver dams on surface and groundwater exchanges and water temperature by evaluating three years of water discharge and temperature data recorded at multiple locations within a small stream in northern Utah. They found that beaver dams increase the water surface elevation and force water into the floodplain resulting in increased inundation and groundwater recharge. They additionally found that beaver dams increase residence …

Weber Basin Water Conservancy District Bottom-Up Climate Vulnerability Study Using Riverware, Jacob Everitt

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

With so much uncertainty of what the future has in store for us, how can we prepare for what lies ahead? The Weber Basin Water Conservancy District (WBWCD) needs to know how they can best prepare for future climate changes and future growth, and where their water system is vulnerable. A bottom-up approach can be used to consider how factors and subfactors effect the vulnerability of their water system's storage and delivery. This approach is accomplished with the use of RiverWare, an advanced water system modeling program. Scenarios to represent the factors are as follows: range of future stream flows, …

Flash Lab: A High-Speed Imaging Laboratory, Cody D. Hatch

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

To help students become better acquainted with high-speed instrumentation and measurement techniques, a high-speed imaging laboratory for the College of Engineering is equipped with a high-speed camera and schlieren imaging device. The laboratory will be used for labs in classes, such as Instrumentation, Thermal/Fluids Lab, Experimental Solids, and Mechanical Experiments. In addition, graduate students will use it for research purposes. The laboratory also has the potential to have a course associated with it that would include the image processing techniques for a variety of applications (e.g., a course on high-speed imaging). The scope of this project will be to create …

Investigation Of The Biosynthetic Process Of Indigoidine, Yi Chen

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Indigoidine is a natural blue dye with antioxidant and antimicrobial activities. It has also been used as an indicator for gene expression based on its distinctive blue color. Similar to the industry blue dye indigo, indigoidine has a promising potential to be applied in industry as a blue dye. However, the indigoidine production level in the original microorganisms was very low. Heterologous expression of the responsible synthetase gene in Escherichia coli can facilitate the fast and large-scale production of indigoidine. Also, a good understating of the working mechanism of the synthetase is favorable for the industrial application.

In our previous …

Comparison Of Induced And Parasitic Drag On Wings With Minimum Induced Drag, Sarah A. Abdel-Motaleb

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Minimizing the induced drag for steady level flight is a variational problem that requires solving for the optimum lift distribution given a set of design constraints. From lifting-line theory, minimizing the induced drag is, in part, achieved by varying the Fourier coefficients used to describe the section lift. The elliptic lift distribution minimizes the induced drag for a wing with fixed weight and wingspan by setting all but the first coefficient to zero. If wingspan is allowed to vary, a negative third Fourier coefficient is utilized to reach an optimum lift distribution that further reduces the induced drag for stress-limited …

A Swimming Open-Water Navigation Assistive Headset And Receiver, Zakk B. Rhodes

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Open water swimming is a common activity dating back to ancient times. One challenge with open water swimming is navigation because while maintaining proper swimming technique suggests the head be in the water, it is difficult to see where one is going. Thus swimmers must bring their head out of the water periodically to sight landmarks. This work describes a solution to this problem by a design for a GPS device to assist swimmers with navigation. The swimmer can plan their own route, send it to the device, and then be guided by the device. They then will not have …

Cell Imaging And Data Analysis For Biomaterial-Mammalian Co-Cultures, Jefferson Pontsler

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Microscopic bioimaging is a useful approach to study cell-biomaterial interactions which are vital to the biomedical application of biomaterials. Through microscopic imaging, numerous cellular responses, such as proliferation, uptake, and death, can be recorded, characterized and analyzed.

In this thesis, I first provided basic introductions to the imaging techniques and analysis tools, especially those that are highly relevant to the studies of biomaterials and cell interactions. I also detailed the adaptation of these techniques and tools in the application of two specific research projects in biomaterials, with special focuses on the imaging and analysis.

The first project assessed the subtle …

Reconstruction Of Attenuated Hybrid Rocket Motor Chamber Pressure Signals Using Maximum Likelihood Estimation And Optimal Deconvolution, Evan M. Zelesnik

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Chamber pressure, as it develops during rocket combustion, strongly correlates with many of the internal motor ballistics, including combustion stability, fuel regression rate, and mass flow. Chamber pressure is also an essential measurement for calculating achieved thrust coefficient and characteristic velocity. Due to the combustion environment hostility, sensing chamber pressure with high-fidelity presents a difficult measurement problem, especially for solid and hybrid rocket systems where combustion by-products contain high amounts of carbon and other sooty materials. These contaminants tend to deposit within the pneumatic tubing used to transmit pressure oscillations from the thrust chamber to the sensing transducer. Partially clogged …

An Assessment Tool To Analyze Code Written In App Inventor, Rohit Gopalan

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Assessment plays a significant role in today’s educational field. When creating an assessment tool, we should keep in mind that the tool measures learning, supports learning and encourages learning. Many assessment tools are available in the educational market such as Dr. Scratch, FCS1 Assessment Instrument, and Beyond the rubric. These tools help teachers to evaluate students’ performance in programming activities, but they do not completely measure the creativity shown by students in programming. For example, Dr. Scratch measures abstraction, problem decomposition, and parallelism. FCS1 Assessment Instrument measures a set of foundational computer science concepts like variables, loops, and arrays. It …

Using An Engineering Design Process To Bring The Local Community Into The Technology And Engineering Education Classroom, James M. Baker

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This plan B project documents the practice of using an authentic project to teach an engineering design process to high school pre-engineering students and documenting the project preparing a manuscript for journal publication.

The manuscript prepared for publication explores the details of working with local business owners and teachers from different departments and curricular foci to design, fabricate, and install an illuminated sign for a local business. This sign project was presented by an alum of the school to provide an authentic project for multiple courses to collaboratively create a solution for a local community business. Twenty-five students in two …

The Live Load Response Of The Open Web Steel Joist Black Slough Bridge, Piero Caputo

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The bridge being studied spans the Black Slough River in the Nucor/Vulcraft facilities near Brigham City, Utah. The bridge is composed of seven heavyweight open web steel joists supporting a concrete deck-slab element and sitting in two concrete cantilever walls serving as bearings. A full-scale live-load test was performed using forklift vehicles at four locations on the deck. During the test, axial strains, deflections, and rotations where measured.

In their provisions, the American Association of State Highway and Transportation Officials (AASHTO) included a simplified number of equations and solutions used to calculate GDFs for standardized decks supported by beam systems. …

Inter-Laminar Fracture Of 3d-Printed Plastics - Development Of Methods, Christopher Stolinski

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Due to the increased use of 3D printed acrylonitrile butadiene styrene (ABS) plastic parts, a way to quantify the failure energy (energy needed to initiate cracking) is needed. Impact tests at high rates of loading are performed to determine failure energy. Throughout testing, specimens are monitored with high speed cameras to perform camera-based deformation measurements. Data acquisition and processing methods to calculate failure energy using crack opening displacement, and loading rates are developed to enable further use by Dr. Ryan Berke’s lab at Utah State University.

Thermal And Stress Analysis Of Nasa X-57 Maxwell Battery Pack, Bhumika Nautiyal

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Air travel has long been an established way of life for millions around the world, but innovation continues to push the boundaries of what is possible in the skies. While aviation has made it easy to travel long distances, the need to lower emissions from flights is pressing. The European Commission has described aviation as “one of the fastest-growing sources of greenhouse gas emissions.”

Airplanes release around 500 million tons of carbon dioxide into the atmosphere each year, representing a significant contribution to global warming. The very concept of a fossil-fuel-powered airplane needs to evolve to fully mitigate the impacts …

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Composite I-beams are popular for high-strength low-weight applications. Learning the macro-mechanics and designing the composite I-beam properly are necessary. In this report, a design overview of the composite I-beam is discussed which is based on classical lamination theory where it includes the homogenization approach, the plane stress assumption and the Kirchhoff hypothesis. Using these assumptions, a method was developed to come up with the effective material properties of a beam. Formulas to calculate maximum deflection and maximum bending stress and shear stress and the stress concentration at the connection of web-flange are discussed which describe ways for designing and manufacturing …

A Non-Equilibrium Molecular Dynamics Study Of The Effects Of Helium Bubbles On The Thermal Conductivity Of Zrc, Tate Shorthill

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Zirconium carbide (ZrC) has been proposed as a potential improvement to nuclear fuel cladding. As such, it is important to characterize its physical properties, particularly those relating to thermal energy transport. Reactor conditions are known to damage fuel microstructure over time. While research has been conducted on undamaged and damaged ZrC, some areas of interest remain. Fission products, such as helium, can accumulate in pores within the fuel microstructure. Such a case has yet to be characterized in ZrC fuel cladding.

A non-equilibrium molecular dynamics model was developed to characterize the thermal properties of ZrC. Fourier’s Law allows the thermal …

Validation Of 16 Degree Arced Labyrinth Weir Coefficients, Megan Gordon Montgomery

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Labyrinth weirs are frequently used to control flow in spillways. Arced labyrinth weirs have been developed and researched in an effort to pass additional flow. Arced labyrinth weirs are more efficient than labyrinth weirs due to their increased length and improved approach flow conditions. In the past research has been done to develop discharge coefficients, Cd, values for arced labyrinth weirs with varying sidewalls angles (a=6°, 12°, and 20°). The Cd data that has been developed can only be used for those specific geometries tested. The purpose of this study was to develop Cd data for an arced labyrinth weir …

Utah Salt Storage Facilities Guidelines And Best Management Practices, Weston Bellon

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

An environmental analysis was conducted at the Utah Water Research Laboratory of samples gathered from Utah Department of Transportation (UDOT) salt storage facilities retention ponds across the state. The analysis indicated high levels of TSS largely made up of minerals directly associated with the deicing solution currently used by UDOT in roadway applications. As a companion to that analysis, best management practices have been identified and compiled to provide a resource for the proper management of salt storage facilities in the state of Utah. Topics included as best management practices include locating new storage facilities, proper salt storage, proper salt …

Effects Of Short-Term Strains On Concrete Bulb-Tee Bridge Girders And Analysis Of The Practicality Of Using Three-Dimensional Models Based On Drone Imagery To Aid In Bridge Inspections, Justin M. Pace

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The University Transportation Center at Utah State University sponsors research through the Federal Highway Administration’s University Transportation Center Program. The purpose of this research is to advance technology and expertise in transportation-related fields. This includes research pertaining to bridge design, monitoring, and inspection (the focus of this research).

The first focus area of this research monitored short-term strains at the bottom of girders in a concrete bulb-tee girder bridge. The strains were caused by traffic loading and recorded using strain transducers attached to the bottom of each bridge girder. Patterns in the strain loading were monitored to draw conclusions about …

A High-Magnification Uv Lens For High-Temperature Optical Strain Measurements, Robert S. Hansen

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Digital Image Correlation (DIC) is an experimental method used to produce full-field strain maps of specimens undergoing deformation. In this measurement, images of a specimen are taken before and after mechanical and thermal loading, then software is used to track deformation and compute strains. DIC has been recently adapted for high-temperature tests by using ultraviolet (UV) range cameras, lenses, and filters to produce the images.

Application of DIC to small length scales and at high temperatures can be performed with proper equipment. However, for these measurements, there is no commercially available high-magnification lens that will allow images to be taken …

Skill Builder: Assistive Technology For Developing Skill And Habits, Aaron Kay

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

The Skill Builder application is assistive technology for helping individuals build skills through reminders and self-reporting feedback. The application has been built to support Android and iOS devices and followed a user-centric design methodology. Skill Builder’s architecture and development processes are set forth using cross-platform development environments and a native software development kit for the three different versions of the application that were built. The strengths and weaknesses of each of the platforms are explored.

Several studies have been proposed for helping individuals with different needs learn the skills to cope with their challenges. Applications of Skill Builder include students …