Engineering Commons^™

Reliability Analysis Of Nanocrystal Embedded High-K Nonvolatile Memories, Chia-Han Yang

Doctoral Dissertations

The evolution of the MOSFET technology has been driven by the aggressive shrinkage of the device size to improve the device performance and to increase the circuit density. Currently, many research demonstrated that the continuous polycrystalline silicon film in the floating-gate dielectric could be replaced with nanocrystal (nc) embedded high-k thin film to minimize the charge loss due to the defective thin tunnel dielectric layer.

This research deals with both the statistical aspect of reliability and electrical aspect of reliability characterization as well. In this study, the Zr-doped HfO₂ (ZrHfO) high-k MOS capacitors, which separately contain the nanocrystalline zinc …

Extending Depth Of Field Via Multifocus Fusion, Harishwaran Hariharan

Doctoral Dissertations

In digital imaging systems, due to the nature of the optics involved, the depth of field is constricted in the field of view. Parts of the scene are in focus while others are defocused. Here, a framework of versatile data-driven application independent methods to extend the depth of field in digital imaging systems is presented. The principal contributions in this effort are the use of focal connectivity, the direct use of curvelets and features extracted by Empirical Mode Decomposition, namely Intrinsic Mode Images, for multifocus fusion. The input images are decomposed into focally connected components, peripheral and medial coefficients and …

Processing, Microstructures, And Properties Of Aluminide-Strengthened Ferritic Steels, Zhenke Teng

Doctoral Dissertations

NiAl-strengthened ferritic steel is a material of interest for steam turbine applications due to their promising creep resistance, high thermal conductivity, low cost and thermal expansion coefficient. However, there are two critical issues restricting their applications: low room temperature ductility and limited creep resistance at temperatures higher than 600°C. The reasons for these behaviors have not been fully understood, especially the processing-microstructure-property relationship has not been clearly identified.

The alloys were designed, fabricated, and processed, according to the required microstructures and properties. The matrix and precipitates can be thoroughly characterized by a combination of techniques, including atom probe tomography, neutron …

Computational And Experimental Study Of Structure-Property Relationships In Nial Precipitate-Strengthened Ferritic Superalloys, Shenyan Huang

Doctoral Dissertations

Ferritic superalloys strengthened by coherent ordered NiAl B2-type precipitates are promising candidates for ultra-supercritical steam-turbine applications, due to their superior resistance to creep, coarsening, oxidation, and steam corrosion as compared to Cr ferritic steels at high temperatures. Combined computational and experimental tools have been employed to investigate the interrelationships among the composition, microstructure, and mechanical behavior, and provide insight into deformation micromechanisms at elevated temperatures.

Self and impurity diffusivities in a body-centered-cubic (bcc) iron are calculated using first-principles methods. Calculated self and impurity diffusivities compare favorably with experimental measurements in both ferromagnetic and paramagnetic states of bcc Fe. The calculated …

Wide Baseline Stereo Image Rectification And Matching, Wei Hao

Doctoral Dissertations

Perception of depth information is central to three-dimensional (3D) vision problems. Stereopsis is an important passive vision technique for depth perception. Wide baseline stereo is a challenging problem that attracts much interest recently from both the theoretical and application perspectives. In this research we approach the problem of wide baseline stereo using the geometric and structural constraints within feature sets.

The major contribution of this dissertation is that we proposed and implemented a more efficient paradigm to handle the challenges introduced by perspective distortion in wide baseline stereo, compared to the state-of-the-art. To facilitate the paradigm, a new feature-matching algorithm …

Robust Multichannel Functional-Data-Analysis Methods For Data Recovery In Complex Systems, Jian Sun

Doctoral Dissertations

In recent years, Condition Monitoring (CM), which can be performed via several sensor channels, has been recognized as an effective paradigm for failure prevention of operational equipment or processes. However, the complexity caused by asynchronous data collection with different and/or time-varying sampling/transmission rates has long been a hindrance in the effective use of multichannel data in constructing empirical models. The problem becomes more challenging when sensor readings are incomplete. Traditional sensor data recovery techniques are often prohibited in asynchronous CM environments, not to mention sparse datasets. The proposed Functional Principal Component Analysis (FPCA) methodologies, e.g., nonparametric FPC model and semi-parametric …

Shear-Band Formation And Thermal Activation In Metallic Glasses, Lu Wang

Doctoral Dissertations

Metallic glasses (MGs) usually have high strength, high hardness and high elastic strain limit. However, the deformation mode and mechanism in metallic glasses are radically different from those in conventional crystalline materials with a long-range ordered structure. For crystalline materials, the intrinsic relationship between their mechanical properties and crystal structures has been well described by dislocation theory. In contrast, for amorphous materials, theories on the structures and controlling factors of localized shear-band formation are far from being complete.

In this thesis, shear-banding behavior of MGs under nanoindentation was first reviewed. The hardness of MGs was found to be independent on …

Micromechanical Studies Of Intergranular Strain And Lattice Misorientation Fields And Comparisons To Advanced Diffraction Measurements, Lili Zheng

Doctoral Dissertations

Inhomogeneous deformation fields arising from the grain-grain interactions in polycrystalline materials have been evaluated using a crystal plasticity finite element method and extensively compared to neutron diffraction measurements under fatigue crack growth conditions. The roles of intergranular deformation anisotropy, grain boundary damage, and non-common deformation mechanisms (such as twinning for hexagonal close packed crystals) are systematically evaluated. The lattice misorientation field can be used to determine the intragranular deformation behavior in polycrystals or to describe the deformation inhomogeneity due to dislocation plasticity in single crystals. The study of indentation-induced lattice misorientation fields in single crystals sheds lights on the understanding …

Nanoscale Metal Thin Film Dewetting Via Nanosecond Laser Melting: Understanding Instabilities And Materials Transport In Patterned Thin Films, Yueying Wu

Doctoral Dissertations

Nanoscale metal thin film dewetting via laser treatment is studied in this dissertation. The purpose is to understand: 1) the spatial and temporal nature of intrinsic instabilities; and 2) mass transportation involved in dewetting pattern evolution in metal thin films as well as in lithographically patterned nanostructures; and finally 3) to explore advanced control of metallic nanostructure fabrication via the confluence of top down nanolithography and pulsed laser induced dewetting. This study includes three sections. In first section, thin film Cu-Ni alloys ranging from 2-8nm were synthesized and laser irradiated. The evolution of the spinodal dewetting process is investigated as …

Design And Control Of High Power Density Motor Drive, Dong Jiang

Doctoral Dissertations

This dissertation aims at developing techniques to achieve high power density in motor drives under the performance requirements for transportation system. Four main factors influencing the power density are the main objects of the dissertation: devices, passive components, pulse width modulation (PWM) methods and motor control methods.

Firstly, the application of SiC devices could improve the power density of the motor drive. This dissertation developed a method of characterizing the SiC device performance in phase-leg with loss estimation, and claimed that with SiC Schottky Barrier Diode the advantage of SiC JFET could benefit the motor drive especially at high temperature. …

Wide-Area Situational Awareness Application Developments, Yanzhu Ye

Doctoral Dissertations

This dissertation expands the topics from the wide-area situational awareness application development, system architecture design, to power system disturbance analysis. All the works are grounded on the wide-area Frequency Monitoring Network (FNET). The FNET system takes GPS-synchronized wide-area measurements in a low-cost, easily deployable manner at 120V single-phase power outlet. These synchronized observations enables the monitoring of bulk power systems, and provides critical information for understanding power system disturbances and system operations.

Firstly, the work addresses the viability of angle measurement to serve different types of situational awareness applications, including the development of new angle-based event location estimation methods, the …

Modeling Chemical Degradation And Proton Transport In Perfluorosulfonic Acid Ionomers, Milan Kumar

Doctoral Dissertations

The ionomer-membrane interface in a membrane electrode assembly connects the catalyst and membrane and allows hydrated protons to move between the catalyst and membrane. The continuous operation of the polymer membrane electrolyte fuel cell at high temperature and/or in frequent freeze/thaw cycles leads to membrane degradation and delamination of the interface, which lower the proton conductivity. In this dissertation, we modeled the chemical degradation and proton conductivity of perfluorosulfonic acid (PFSA) ionomers by ab initio calculations and macroscopic modeling. All ab initio calculations were performed using Gaussian 03 suites of program by employing B3LYP/6-311++G** method/basis set. The macroscopic modeling involves …

Wide-Area Measurement Application And Power System Dynamics, Lang Chen

Doctoral Dissertations

Frequency monitoring network (FNET) is a GPS-synchronized distribution-level phasor measurement system. It is a powerful synchronized monitoring network for large-area power systems that provides significant information and data for power system situational awareness, real time and post-event analysis, and other important aspects of bulk systems. This work explored FNET measurements and utilized them for different applications and power system analysis.

An island system was built and validated with FNET measurements to study the stability of the OTEC integration. FNET measurements were also used to validate a large system model like the U.S. Eastern Interconnection. It tries to match the simulation …

Packaging Design Of Igbt Power Module Using Novel Switching Cells, Shengnan Li

Doctoral Dissertations

Parasitic inductance in power modules generates voltage spikes and current ringing during switching which cause extra stress in power electronic devices, increase electromagnetic interference (EMI), and degrade the performance of the power converter system. As newer power devices have faster switching speeds and higher power ratings, the effect of the parasitic inductance of the power module is more pronounced. This dissertation proposes a novel packaging method for power electronics modules based on the concepts of novel switching cells: P-cell and N-cell. It can reduce the stray inductance in the current commutation path in a phase-leg module and hence improve the …

Design Of Wireless Power Transfer And Data Telemetry System For Biomedical Applications, Ashraf Bin Islam

Doctoral Dissertations

With the advancement of biomedical instrumentation technologies sensor based remote healthcare monitoring system is gaining more attention day by day. In this system wearable and implantable sensors are placed outside or inside of the human body. Certain sensors are needed to be placed inside the human body to acquire the information on the vital physiological phenomena such as glucose, lactate, pH, oxygen, etc. These implantable sensors have associated circuits for sensor signal processing and data transmission. Powering the circuit is always a crucial design issue. Batteries cannot be used in implantable sensors which can come in contact with the blood …

Cytongrasp: Cyton Alpha Controller Via Graspit! Simulation, Nicholas Wayne Overfield

Masters Theses

This thesis addresses an expansion of the control programs for the Cyton Alpha 7D 1G arm. The original control system made use of configurable software which exploited the arm’s seven degrees of freedom and kinematic redundancy to control the arm based on desired behaviors that were configured off-line. The inclusions of the GraspIt! grasp planning simulator and toolkit enables the Cyton Alpha to be used in more proactive on-line grasping problems, as well as, presenting many additional tools for on-line learning applications. In short, GraspIt! expands what is possible with the Cyton Alpha to include many machine learning tools and …

Failure Analysis Of Leaking Stainless Steel Pump Casing, Mary E. Parker

Chancellor’s Honors Program Projects

No abstract provided.

Distributed Data Aggregation For Sparse Recovery In Wireless Sensor Networks, Shuangjiang Li

Masters Theses

We consider the approximate sparse recovery problem in Wireless Sensor Networks (WSNs) using Compressed Sensing/Compressive Sampling (CS). The goal is to recover the $n \mbox{-}$dimensional data values by querying only $m \ll n$ sensors based on some linear projection of sensor readings. To solve this problem, a two-tiered sampling model is considered and a novel distributed compressive sparse sampling (DCSS) algorithm is proposed based on sparse binary CS measurement matrix. In the two-tiered sampling model, each sensor first samples the environment independently. Then the fusion center (FC), acting as a pseudo-sensor, samples the sensor network to select a subset of …

Automated Visual Monitoring Of Machining Equipment, Timothy Wayne Ragland

Masters Theses

Metalworking equipment is designed to modify a sheet, rod, or block of metal material in order to shape it for a specific application. This equipment can operate on the metal by bending it, drilling through it, or by cutting it. For small-scale operations, many tools require a significant amount of manual input. Unless the operator has extensive training and experience, the manual input may not be precise enough for fine details that may be needed in some applications. For example, with a bending brake, obtaining an accurate angle for the bend may be quite difficult. For a particular application, an …

Transverse Waves In Simulated Liquid Rocket Engines With Arbitrary Headwall Injection, Charles Toufic Haddad

Masters Theses

This work introduces a closed-form analytical solution for the transverse vorticoacoustic wave in a circular cylinder with arbitrary headwall injection. This particular configuration mimics the conditions leading to the onset of traveling radial and tangential waves in a simple liquid rocket engine (LRE). Assuming a short cylindrical chamber with an injecting headwall, regular perturbations are used to linearize the problem’s mass, momentum, energy, ideal gas and isentropic relations. A Helmholtz decomposition is subsequently applied to the first-order disturbance equations, thus giving rise to a compressible, inviscid and acoustic set that is responsible for driving the unsteady motion and to an …

Comparative Study On Posture And Its Influences On Horizontal Ground Reaction Forces Generated By Muscles: Implications For Crouch Gait, Hoa Xuan Hoang

Masters Theses

Crouch gait decreases walking efficiency due to the increased knee and hip flexion during the stance phase of gait. Crouch gait is generally considered to be disadvantageous for patients with cerebral palsy; however, a crouched posture may afford biomechanical advantages that lead some patients to adopt a crouch gait.

To investigate one possible advantage of crouch gait, a musculoskeletal model created in OpenSim was placed in 15 different postures from upright to severe crouch during initial, middle, and final stance of the gait cycle. A series of optimizations were performed for each posture to maximize ground reaction forces for the …

Automating Real-Time Fault Detection For The University Of Tennessee Space Institute, Aviation Systems’ Flight Testing And Airborne Science Applications, Samuel Vivek Williams

Masters Theses

The UTSI Aviation Systems program has conducted many successful airborne science campaigns in collaboration with premier research organizations including NASA and NOAA. Each airborne science mission requires dedicated FTEs to monitor the various instruments onboard the aircraft. A typical mission requires aircraft to be instrumented with a wide range of sensors (with approximately 145 data parameters). Monitoring the instruments requires highly skilled personnel who have a thorough understanding of the system.

With the advent of UTSI Aviation Systems program increasing capabilities to conduct multiple missions, using multiple airborne platforms, the requirement of a skilled FTE for each mission could effectively …

Performance Specification For Tennessee Bridge Decks, Brian Ray Buchanan

Masters Theses

In today’s world of ever increasing demand on a weakening infrastructure, concentration is being firmly placed on increasing the sustainability of that infrastructure. Tennessee’s bridges and the concrete decks, on which the public travels, require a large part of the state’s infrastructure spending. Research has shown the current durability standards of Tennessee’s bridge decks could be significantly improved which would both increase service life and reduce maintenance costs of these structures. This research concentrates on greatly increasing the lifespan of these bridge decks, throughout the state, through an improved construction specification which will encourage the increased use of supplementary cementitious …

Particle Shielding For Human Spaceflight: Electrostatic Potential Effects On The Störmer Magnetic Dipole Exclusion Region, Benjamin Alan Klamm

Masters Theses

A basic hybrid radiation shield concept, consisting of both a monopole positive electrostatic potential barrier and a current-carrying superconducting solenoid, was predicted to provide a more effective method of shielding a habitable torus region than a solenoid acting alone. A randomized position and velocity vector simulation of equal-energy iron ions using a Lagrangian reference frame was performed on the exact magnetic field integral for the solenoid and a discrete summation electrostatic field for a toroidal monopole array approximating a potential surface. Each particle is injected at a specific energy (100, 150 MeV and 1 GeV). Two cases were evaluated at …

U.S Inflight Icing Accidents And Incidents, 2006 To 2010., Philip Appiah-Kubi

Masters Theses

Through its recommendations, the National Transportation Safety Board (NTSB) has helped the Federal Aviation Administration (FAA) introduce regulations that have helped to curtail icing accidents1 (an occurrence associated with the operation of an aircraft where as a result of the operation of an aircraft, any person receives fatal or serious injury or any aircraft receives substantial damage) and incidents1 (an occurrence, other than an accident, associated with the operation of an aircraft that affects or could affect the safety of operations). However, "the only acceptable safety goal of zero accident," proposed by former Secretary of Transportation, Federico Fabian Pena, has …

Residential Attic Ventilation In A Hot And Humid Climate: Effects Of Increased Ventilation On Thermal Performance And Moisture Control, Stanley Arthur Atherton

Masters Theses

The reality of the effect of natural ventilation in a residential attic cavity has been the topic of many debates and scholarly reports since the 1930’s. The purpose of ventilating an attic cavity is to prevent collection of condensate on the structural surfaces, and to create a thermal buffer between the conditioned space and the ambient air. The current standards are not specific to climate zone, despite the fact that each climate zone may require ventilation for very different reasons.

To address the issue of ventilation effects in a hot and humid climate, a Natural Exposure Testing facility was constructed …

Potential Impacts Of Climate Change On Water Resources And Water Quality Of Norris Lake, Tennessee, Yong-Gil Choi

Masters Theses

This study assessed the potential impacts of climate change on hydrology, water resources operation, and water quality of the Norris Lake area in Tennessee. To project future climate conditions, the simulation outputs for 2030s, 2050s, and 2070s from six general circulation models (GCMs) were extracted under two Intergovernmental Panel on Climate Change (IPCC) greenhouse gases emissions scenarios (A2 and B1 for high and low emissions, respectively) to consider the range of uncertainty. The outputs of the six GCMs were weighted by considering their accuracy to simulate the climate conditions observed from 1961 to 1990 to suggest an ensemble average. A …

Short Distance Ground Wave Propagation Modeling In Irregular And Forested Environments, Zachary Michael Crane

Masters Theses

A model for the phase of a ground wave propagating over irregular and forested terrain has been developed and tested for a transmission system operating at 3.315 MHz.

In this model, the time delay induced beyond that of the standard velocity of radio waves in air is modeled as a combination of 3 effects: the finite conductivity of the earth, the irregularity of the terrain over which the wave is propagating, and the forestation of the terrain.

The finite conductivity model is based on a small curvature formula developed by Van Der Pol and Bremmer. The terrain irregularity model models …

Prognostics-Based Two-Operator Competition For Maintenance And Service Part Logistics, Faranak Fathi Aghdam

Masters Theses

Prognostics and timely maintenance of components are critical to the continuing operation of a system. By implementing prognostics, it is possible for the operator to maintain the system in the right place at the right time. However, the complexity in the real world makes near-zero downtime difficult to achieve partly because of a possible shortage of required service parts. This is realistic and quite important in maintenance practice. To coordinate with a prognostics-based maintenance schedule, the operator must decide when to order service parts and how to compete with other operators who also need the same parts. This research addresses …

Development Of An Environmental Monitoring System For Greenhouse Disease Management, Crystal Marie Kelly

Masters Theses

A commercial African violet (Saintpaulia ionantha) grower experiences yield loss due to a leaf spot disease known as Corynespora casssiicola. Spotted leaves make the plants unmarketable. Outbreaks of the disease are costly and difficult to prevent. Greenhouse monitoring systems currently available on the commercial market do not have sufficient spatial or temporal resolution to be able to correlate the environmental conditions of the greenhouse with disease outbreaks. A new system was designed specifically to monitor for disease favorable conditions. The system developed for this project consists of several sensor stations and a coordinator station. The coordinator station …