Engineering Commons^™

A Use Of Theory Of Constraints Thinking Processes For Improvements In The Merged Beams Experiment At Oak Ridge National Laboratory., Bryan Richard Gross

Electronic Theses and Dissertations

Thinking exercises used in the Theory of Constraints (TOC) were used to find and remove constraints at the Merged Beams Experiment at Oak Ridge National Laboratory. The goal of this project was to significantly reduce the amount of time used to take a certain type of measurement during an experimental cycle. After the TOC exercises were used, a basic plan for change was discovered. Preliminary data were taken to establish a baseline of performance from which changes were made. Post-Modification was analyzed showing the project was a success.

The overlying reasoning for this exercise was to prove successfully that continuous …

Efficient Rotation Algorithms For Texture Evolution, Mark W. Esty

Theses and Dissertations

Texture evolution is a vital component of many computational tools that link structure, properties and processes of polycrystalline materials. By definition, this evolution process involves the manipulation, via rotation, of points in orientation space. The computational requirements of the current methods being used to rotate crystalline orientations are a significant limiting factor in the drive to merge the texture information of materials into the engineering design process. The goal of this research is to find and implement a practical rotation algorithm that can significantly decrease the computation time required to rotate macroscopic and microscopic crystallographic textures. Three possible algorithms are …

Development Of A Methodology For Numerical Simulation Of A D C Arc Discharge In A Liquid Dielectric, Christopher James Lewis

Theses and Dissertations

The majority of literature regarding the numerical simulation of arc discharges in gaseous environments has used a plasma physics approach. Virtually all simulations treat the discharge as an idealized gaseous plasma, which can be described by temperature, pressure, and electric field. This approach can work well if the media is a shielding gas such as Argon; however, the approach does not work well for processes such as underwater welding, EDM, and underwater discharges used to generate high purity particles. The reason these discharges do not have many extensive simulation efforts as described in the literature is because they occur in …

Passive Earth Pressures On A Pile Cap With A Dense Sand Backfill, Robert Ashall Marsh

Theses and Dissertations

Pile groups are often used to provide support for structures. Capping a pile group further adds to the system's resistance due to the passive earth pressure from surrounding backfill. While ultimate passive earth pressure under static loading conditions can be readily calculated using several different theories, the effects of cyclic and dynamic loading on the passive earth pressure response are less understood. Data derived from the full-scale testing of a pile cap system with a densely compacted sand backfill under static, cyclic, and dynamic loadings was analyzed with particular focus on soil pressures measured directly using pressure plates. Based on …

Energy Dissipation Caused By Asphalt Roadway Gouges For Use In Accident Reconstruction, Charles L. Crosby

Theses and Dissertations

In reconstruction of on-roadway vehicle accidents, roadway surface gouges and the forces and energy attributed to the related vehicle components become important keys to resolving an accurate accident reconstruction. These roadway gouge forces vary depending upon such factors as surface temperature and the velocity and geometry of the gouging mechanism. Accounting for the forces applied to vehicle components and the energy dissipated from such forces can be helpful in accident reconstruction where supporting data exists. This research documents the force necessary to create a given roadway gouge geometry. Controlled pavement gouging tests were performed using roadway surface temperature and gouging …

Computational Modeling Of Biochemical Systems Using Cellular Automata, Advait Apte

Theses and Dissertations

Biological systems exhibit complex behaviors through coordinated responses of individual biological components. With the advent of genome-scale techniques, one focus has been to develop methods to model interactions between components to accurately describe intact system function. Mathematical modeling techniques such as constraint-based modeling, agent-based modeling, cellular automata (CA) modeling and differential equation modeling are employed as computational tools to study biological phenomenon. We have shown that cellular automata simulations can be used as a computational tool for 12 predicting the dynamics of biological systems with stochastic behavior. The basic premise for the research was the observations made during a study …

Decision-Based Data Fusion Of Complementary Features For The Early Diagnosis Of Alzheimer's Disease, Metin Ahiskali

Theses and Dissertations

As the average life expectancy increases, particularly in developing countries, the prevalence of Alzheimer's disease (AD), which is the most common form of dementia worldwide, has increased dramatically. As there is no cure to stop or reverse the effects of AD, the early diagnosis and detection is of utmost concern. Recent pharmacological advances have shown the ability to slow the progression of AD; however, the efficacy of these treatments is dependent on the ability to detect the disease at the earliest stage possible. Many patients are limited to small community clinics, by geographic and/or financial constraints. Making diagnosis possible at …

Investigation Of The Mechanical Properties Of Poly (Ethylene Glycol) Diacrylate By Nanoindentation Using Atomic Force Microscopy, Zouheir Drira

Theses and Dissertations

Poly (ethylene glycol) (PEG) hydrogel based polymers are among the most widely used synthetic materials for biomedical applications. Because of their biocompatibility, and ease of fabrication, hydrogels are highly suitable for use as constructs to engineer tissues as well as for cell transplantation. A critical parameter of importance for PEG hydrogels is their mechanical properties which are highly dependent on the environmental conditions. Properties of PEG-based hydrogels can be engineered to resemble scaffolds composed of extracellular matrix molecules, which provide structural support, adhesive sites and mechanical as well as biomechanical signals to most cells. The mechanical properties of these synthetic …

Extending The Strategy Based Risk Model Using The Delphi Method: An Application To The Validation Process For Research And Developmental (R&D) Satellites, Amanda J. Langenbrunner, Mary R. Trautwein

Theses and Dissertations

The validation between a research and developmental satellite and its ground system is critical to ensuring the success on-orbit. However, the exact process for completing validation is not documented, frequently underfunded, and accomplished ad hoc. This leads to debate regarding maintenance of budget and schedule, while ensuring on-orbit success. This thesis examines readiness and on-orbit activities within the U.S. Air Force Space Development and Test Wing's Research Development Test and Evaluation Support Complex. Combining historical data with the consultation of subject matter experts, a validation process was defined. Risks associated with this process were then analyzed using the Strategy Based …

Analyzing Systems Integration Best Practices And Assessment In Dod Space Systems Acquisition, Douglas R. Dillon, Enriqueta M. Styres

Theses and Dissertations

Senior leadership of the Air Force's Space and Missile Center suggested an investigation of systems integration within the space acquisition community in the fall of 2008. This thesis performs that investigation. A review concluded that while Systems Integration (SI) is extensively discussed as an area deserving considerable attention in the Systems Engineering literature, definitions are weak and methods and tools non-existent. Known SI activities are not being traced and assessed for adequacy throughout system development. Employing the Space System Acquisition Lifecycle Framework as the environment for this research, a method of characterizing and tracing SI throughout a program‘s lifecycle by …

Heat And Current Propagation In Buffered Superconducting And Hyper-Conducting Wire, Jesse L. Lynn

Theses and Dissertations

This research models and analyzes the distribution of heat and current in a buffered superconducting or hyper-conducting wire that shows potential for use in different capacities in multiple Air Force systems including the Active Denial System. The thesis includes a brief background of the reaction-diffusion system of partial differential equations provided by AFRL/RZPG and development of the numerical scheme. It then explores solutions to the model. These solutions indicate some of the various heat-related failures that may be observed in such a wire. The nature of the solutions observed depends on the characteristics of the wire, operating temperature and efficiency …

Tailored Systems Architecture For Design Of Space Science And Technology Missions Using Dodaf V2.0, Nicholas J. Merski

Theses and Dissertations

The use of systems architecture, following a set of integrated descriptions from an architecture framework, has been well codified in Department of Defense acquisition and systems engineering. However, in the Space Science and Technology (S&T) community, this guidance and practice is not commonly adopted. This paper outlines an approach to leverage the changes made in DoD Architecture Framework 2.0 (DoDAF2.0), and the renewed emphasis on data and support to acquisition decision analysis. After decomposing the Space S&T design lifecycle into phases, design milestones and activities using process models, a set of DoDAF prescribed and Fit-for-Purpose views are constructed into a …

Performance Analysis Of Live-Virtual-Constructive And Distributed Virtual Simulations: Defining Requirements In Terms Of Temporal Consistency, Douglas D. Hodson

Theses and Dissertations

This research extends the knowledge of live-virtual-constructive (LVC) and distributed virtual simulations (DVS) through a detailed analysis and characterization of their underlying computing architecture. LVCs are characterized as a set of asynchronous simulation applications each serving as both producers and consumers of shared state data. In terms of data aging characteristics, LVCs are found to be first-order linear systems. System performance is quantified via two opposing factors; the consistency of the distributed state space, and the response time or interaction quality of the autonomous simulation applications. A framework is developed that defines temporal data consistency requirements such that the objectives …

Flow Measurements Using Particle Image Velocimetry In The Ultra Compact Combustor, Levi M. Thomas

Theses and Dissertations

Velocity measurements were performed using the Particle Image Velocimetry (PIV) technique on the Ultra Compact Combustor (UCC) test rig at the Air Force Institute of Technology (AFIT). Velocity patterns and time-averaged turbulence statistics were calculated for data taken with the UCC burning hydrogen fuel in the straight cavity vane and curved cavity vane configurations. The equivalence ratio was varied from 0.7 to 1.5, while the ratio of cavity air to main air was varied from 5% to 20% in testing performed on the straight vane configuration. Spanwise velocity was observed to decrease linearly with distance from the cavity vane over …

Electromagnetic Field Control And Optimization Using Metamaterials, Jeffrey S. Mcguirk

Theses and Dissertations

Transformation optics has shown the ability to cloak an object from incident electromagnetic radiation is possible. However, the material parameters are inhomogeneous, anisotropic, and, in some instances, singular at various locations. In order for a cloak to be practically realized, simplified parameter sets are required. However, the simplified parameters result in a degradation in the cloaking function. Constitutive parameters for simplified two-dimensional cylindrical cloaks have been developed with two material property constraints. It was initially believed satisfying these two constraints would result in the simplified cylindrical cloaks having the same wave equation as an ideal cloak. Because of this error, …

A Physical Model Of Human Skin And Its Application For Search And Rescue, Abel S. Nunez

Theses and Dissertations

For this research we created a human skin reflectance model in the VIS and NIR. We then modeled sensor output for an RGB sensor based on output from the skin reflectance model. The model was also used to create a skin detection algorithm and a skin pigmentation level (skin reflectance at 685nm) estimation algorithm. The average root mean square error across the VIS and NIR between the skin reflectance model and measured data was 2%. The skin reflectance model then allowed us to generate qualitatively accurate responses for an RGB sensor for different biological and lighting conditions. To test the …

Discrete Film Cooling In A Rocket With Curved Walls, Jonathan F. Mccall

Theses and Dissertations

This study quantified the effects of discrete wall-based film cooling in a rocket with curved walls. Simulations and experiments showed decreasing with wall radius of curvature, holding jet diameter constant, improves net heat flux reduction (NHFR) and adiabatic effectiveness (η) for 90˚ compound injected cylindrical jets, though η is reduced at the highest curvature. NHFR and η improved further with a high favorable stream-wise pressure gradient (K=2.1x10^-5) at all tested blowing ratios, but were affected little by a high density ratio (DR=1.76) using carbon dioxide as the coolant. Experiments were run at a Reynolds number of 31K and …

Investigation Into Contact Resistance And Damage Of Metal Contacts Used In Rf-Mems Switches, Kevin W. Gilbert

Theses and Dissertations

This research examines the physical and electrical processes involved in lifecycle failure of Microelectromechanical (MEMS) Radio-Frequency (RF) cantilever beam ohmic contact switches. Failures of these switches generally occur at the contact, but complete details of performance of microcontacts are difficult to measure and have not been previously reported. This study investigated the mechanics of microcontact behavior by designing and constructing a novel experimental setup. Three representative contact materials of varying microstructure (Au, Au5%Ru, Au4%V₂O₅) were tested and parameters of contact during cycling were measured. The Au4%V₂O₅, a dispersion strengthened material developed at …

Laser-Induced Fluorescence And Synthetic Jet Fuel Analysis In The Ultra Compact Combustor, Aaron C. Drenth

Theses and Dissertations

The Ultra-Compact Combustor (UCC) is currently under investigation at the Air Force Institute of Technology (AFIT) and Air Force Research Laboratory’s Propulsion Directorate. The combustor is a small-scale, axi-symmetric, atmospheric pressure, laboratory combustor with an outer circumferential cavity in which the flame is stabilized by a highly accelerated swirled flow. UCCs will enable aero gas turbine reheat cycle engines and significantly shorten conventional aero gas turbine engines. The experiments of this work utilized the AFIT small-scale combustion diagnostics facility, investigating a sector model of the UCC. The research objectives were to perform an addition to the COAL lab laser diagnostic …

Fatigue Behavior Of An Advanced Sic/Sic Composite At Elevated Temperature In Air And In Steam, Devon T. Christensen

Theses and Dissertations

The fatigue behavior of an advanced Silicon Carbide/Silicon Carbide (SiC/SiC) ceramic matrix composite (CMC) was investigated at 1200 ˚C in laboratory air and in steam environments. The composite consisted of a SiC matrix reinforced with Boron Nitride (BN) coated Hi-Nicalon fibers woven into eight-harness-satin (8HS) weave plies. Tensile stress-strain behavior and tensile properties were also evaluated at 1200 ˚C. Tension-tension fatigue tests were conducted in both laboratory air and in steam at 1200 ˚C at frequencies of 0.1 Hz, 1.0 Hz, and 10 Hz. The tension-tension fatigue tests had a ratio of minimum stress to maximum stress of R = …

Flow Visualization Study Of Passive Flow Control Features On A Film-Cooled Turbine Blade Leading Edge, Daniel R. Carroll

Theses and Dissertations

A flow visualization study was conducted on a model of a film-cooled turbine blade leading edge in a closed-loop water channel at Re_D = 30k. The model consisted of an 8.89 cm diameter half-cylinder with flat afterbody joined at the ninety degree point. A single radial coolant hole (d_c / D = 0.054) drilled 21.5° from the stagnation line, angled 20° to the surface and 90° to the flow direction generated a coolant jet transverse to the freestream. Water channel testing assessed the hydrodynamic effects of 16 passive flow control features, to include a variety of …

Oculomotor Control In Patients With Parkinson's Disease, George Gitchel

Theses and Dissertations

There have been few studies investigating the eye movement behavior of Parkinson’s disease patients during fixation. This study objectively measured the eye movements of 36 patients with Parkinson’s disease, and 20 age matched controls. Stimuli consisted of ten standardized text passages first organized by Miller and Coleman. In addition, subjects followed a randomly displaced step jump target motion. Pendular nystagmus was found in all Parkinson’s subjects, with an average frequency of 7.44 Hz. Saccadic peak velocity and duration along the main sequence were not statistically different from controls. A slower rate of reading was also noted in the Parkinson’s group …

Studies On The Performance And Impact Of Channel Estimation In Mimo And Ofdm Systems, Michael David Larsen

Theses and Dissertations

The need for reliable, high-throughput, mobile wireless communication technologies has never been greater as increases in the demand for on-the-go access to information, entertainment, and other electronic services continues. Two such technologies, which are at the forefront of current research efforts, are orthogonal frequency division multiplexing (OFDM) and multiple-input multiple-output (MIMO) systems, their union being known simply as MIMO-OFDM. The successful performance of these technologies depends upon the availability of accurate information concerning the wireless communication channel. In this dissertation, several issues related to quality of this channel state information (CSI) are studied. Specifically, the first part of this dissertation …

Estudio De Las Ventajas Del Reciclado In Situ En Caliente De Pavimentos Flexibles, Juan Carlos Sanchez Angel

Ingeniería Civil

No abstract provided.

Automated Methods For Fiber Diameter Measurement Of Fibrous Scaffolds, Anna Bulysheva

Theses and Dissertations

The purpose of this work was to develop an automated method of measuring fiber diameters of electrospun scaffolds from scanning electron microscopy images of these scaffolds. Several automated methods were developed and evaluated by comparison to known values and data obtained via the standard manual method. Simulated images with known diameters were used as test images to evaluate the accuracy of each measurement technique. Eight scanning electron microscopy images were also used for the evaluation of the automated methods compared to the standard manual method. All diameter measurements were made in pixels. Five new automated methods coded in MATLAB were …

Efficient Implementation Of Raid-6 Encoding And Decoding On A Field Programmable Gate Array (Fpga), David Jacob

Theses and Dissertations

RAID-6 is a data encoding scheme used to provide single drive error detection and dual drive error correction for data redundancy on an array of disks. Here we present a thorough study of efficient implementations of RAID-6 on field programmable gate arrays (FPGAs). Since RAID-6 relies heavily on Galois Field Algebra (GFA), an efficient implementation of a GFA FPGA library is also presented. Through rigorous performance analysis, this work shows the most efficient ways to tradeoff FPGA resources and execution time when implementing GFA functions as well as RAID-6 encoding and decoding.

Experimental And Numerical Investigation On Pyroelectric Energy Scavenging, Jingsi Xie

Theses and Dissertations

Pyroelectric energy scavenging is the process of converting wasted energy from a system to power another one, based on the pyroelectric effect of piezoelectric materials. Pyroelectrically generated power is a function of the surface of material, the pyroelectric coefficient, and the temporal temperature gradient. In the current project, a simple model is developed to predict the power generation based on the temporal change in temperature of material. In addition, a model is validated with experimental measurements from several piezoelectric materials. It is shown that energy generation can be enhanced by using piezoelectric materials with significantly higher pyroelectric coefficients such as …

The Effect Of Flowable Fill On The Lateral Resistance Of Driven-Pile Foundations, Dustin David Miner

Theses and Dissertations

Flowable fill was used to strengthen the soft soil surrounding piles and behind the pile cap. The flowable fill placed beneath the pile cap surrounding the piles showed no appreciable increase in lateral resistance, this was partially due to the fact that the flowable fill placed had an unconfined compressive strength of 30 psi. Flowable fill was also used to replace a 12 ft wide, 6 ft thick, and 6 ft deep zone consisting of an average 475 psf clay that was adjacent to a 9-pile group in 3x3 pile configuration capped with a 9 ft x 9 ft x …

Prediction Of Fluid Viscosity Through Transient Molecular Dynamic Simulations, Jason Christopher Thomas

Theses and Dissertations

A novel method of calculating viscosity from molecular dynamics simulations is developed, benchmarked, and tested. The technique is a transient method which has the potential to reduce CPU requirements for many conditions. An initial sinusoidal velocity profile is overlaid upon the peculiar velocities of the individual molecules in an equilibrated simulation. The transient relaxation of this initial velocity profile is then compared to the corresponding analytical solution of the momentum equation by adjusting the viscosity-related parameters in the constitutive equation that relate the shear rate to the stress tensor. The newly developed Transient Molecular Dynamics (TMD) method was tested for …

A Study Of Nonlinear Combustion Instability, Eric J. Jacob

Doctoral Dissertations

Combustion instability (CI) has been persistent in all forms of propulsion since their inception. CI is characterized by pressure oscillations within the propulsion system. If even a small fraction of the dense energy within the system is converted to acoustic oscillations the system vibrations can be devastating. The coupling of combustion and fluid dynamic phenomena in a nonlinear system poses CI as a significant engineering challenge.

Drawing from previous analysis, second order acoustic energy models are taken to third order. Second order analysis predicts exponential growth. The addition of the third order terms capture the nonlinear acoustic phenomena (such as …