Engineering Commons^™

Vertical Free-Swinging Photovoltaic Racking Energy Modeling: A Novel Approach To Agrivoltaics, Koami Soulemane Hayibo, Joshua M. Pearce

Electrical and Computer Engineering Publications

To enable lower-cost building materials, a free-swinging bifacial vertical solar photovoltaic (PV) rack has been proposed, which complies with Canadian building codes and is the lowest capital-cost agrivoltaics rack. The wind force applied to the free-swinging PV, however, causes it to have varying tilt angles depending on the wind speed and direction. No energy performance model accurately describes such a system. To provide a simulation model for the free-swinging PV, where wind speed and direction govern the array tilt angle, this study builds upon the open-source System Advisor Model (SAM) using Python. After the SAM python model is validated, a …

Understanding The Role Thin Film Interfaces Play In Solar Cell Performance And Stability, Mirra M. Rasmussen, Laura S. Bruckman, Ina T. Martin

Student Scholarship

As more efficient and cost-effective photovoltaic (PV) architectures are developed, solar becomes an ever more competitive and viable replacement for fossil fuels. Full grid electrification necessitates the development of efficient, reliable, cost-effective technologies - and there is room for many different kinds of PV in this expanding market. The practical challenges and constraints of terawatt PV production have brought scalability and durability into sharp scientific focus. From a materials perspective, there are commonalities in the materials questions and challenges across different PV technologies. Whereas most PV technology is referred to by the absorber layer - e.g. silicon, or perovskite solar …

Statistical Analysis And Degradation Pathway Modeling Of Photovoltaic Minimodules With Varied Packaging Strategies, Sameera Nalin Venkat, Xuanji Yu, Jiqi Liu, Jakob Wegmueller, Jayvic Cristian Jimenez, Erika I. Barcelos, Hein Htet Aung, Roger H. French, Laura S. Bruckman

Faculty Scholarship

Degradation pathway models constructed using network structural equation modeling (netSEM) are used to study degradation modes and pathways active in photovoltaic (PV) system variants in exposure conditions of high humidity and temperature. This data-driven modeling technique enables the exploration of simultaneous pairwise and multiple regression relationships between variables in which several degradation modes are active in specific variants and exposure conditions. Durable and degrading variants are identified from the netSEM degradation mechanisms and pathways, along with potential ways to mitigate these pathways. A combination of domain knowledge and netSEM modeling shows that corrosion is the primary cause of the power …

Comparison Of Predicted And Measured Annual Performance Of A Roof-Top Grid-Connected Pv System In The Irish Climate, Chibuisi Chinasaokwu Okorieimoh, Brian Norton Prof, Michael Conlon Prof

Conference Papers

The problem of energy scarcity has reached a global scale as a result of the majority of energy production relying on non-renewable sources of energy. Solar photovoltaic cells use the photovoltaic effect to convert solar energy into electrical energy. Solar energy can reduce emissions of carbon dioxide (CO₂) associated with the generation from fossil fuels as the only CO₂ emissions are those embodied in their manufacture. A 268.8 m² area roof-top grid-connected PV system with a total capacity of 49.92kW_p was installed at Warrenpoint (54.11^oN and 6.26^oW) in Ireland. 192 “Renesola” …

Perovskite Film Formation For Solar Cell Absorbers: Effects Of Substrate Modification, Mirra M. Rasmussen, Kyle M. Crowley, Ina T. Martin

Student Scholarship

As perovskite solar cell efficiencies have risen rapidly, practical constraints have made durability a critical concern. Whereas much attention has been paid to the development of the perovskite absorber layer, the charge transport layers can also be engineered to better the performance and stability of the device. This work uses the molecular modifier bromopropyltrimethoxysilane (BPTMS) to alter the interface between indium tin oxide (ITO, a common thin film solar cell transparent electrode) and methylammonium lead iodide (MAPbI3, a common perovskite absorber) to improve the morphology and stability of the perovskite absorber film. The substrate, molecular modifier, and perovskite film were …

Decoupling The Effects Of Interfacial Chemistry And Grain Size In Perovskite Stability, Mirra M. Rasmussen, Kyle M. Crowley, Miranda S. Gottlieb, Geneviève Sauvé, Ina T. Martin

Student Scholarship

No abstract provided.

A Photoanode With Hierarchical Nanoforest Tio 2 Structure And Silver Plasmonic Nanoparticles For Flexible Dye Sensitized Solar Cell, Brishty Deb Choudhury, Chen Lin, Sk Md Ali Zaker Shawon, Javier Soliz-Martinez, Hasina Huq, Mohammed Jasim Uddin

Electrical and Computer Engineering Faculty Publications and Presentations

Due to unique photovoltaic properties, the nanostructured morphologies of TiO2 on flexible substrate have been studied extensively in the recent years for applications in dye sensitized solar cells (DSSCs). Microstructured electrode materials with high surface area can facilitate rapid charge transport and thus improve the light-to-current conversion efficiency. Herein we present an improved photoanode with forest like photoactive TiO2 hierarchical microstructure using a simple and facile hydrothermal route. To utilize the surface plasmon resonance (SPR) and hence increase the photon conversion efficiency, a plasmonic nanoparticle Ag has also been deposited using a very feasible photoreduction method. The branched structure of …

Renewable Energy Generation And Ghg Emission Reduction Potential Of A Satellitewater Reuse Plant By Using Solar Photovoltaics And Anaerobic Digestion, Jonathan R. Bailey, Saria Bukhary, Jacimaria R. Batista, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Wastewater treatment is a very energy-intensive process. The growing population, increased demands for energy and water, and rising pollution levels caused by fossil-fuel-based energy generation, warrants the transition from fossil fuels to renewable energy. This research explored the energy consumption offset of a satellite water reuse plant (WRP) by using solar photovoltaics (PVs) and anaerobic digestion. The analysis was performed for two types of WRPs: conventional (conventional activated sludge system (CAS) bioreactor with secondary clarifiers and dual media filtration) and advanced (bioreactor with membrane filtration (MBR)) treatment satellite WRPs. The associated greenhouse gas (GHG) emissions were also evaluated. For conventional …

Annual Simulation Of Photovoltaic Retrofits Within Existing Parabolic Trough Concentrating Solar Powerplants, Nipun Goel, Hannah O'Hern, Matthew Orosz, Todd Otanicar

Mechanical and Biomedical Engineering Faculty Publications and Presentations

Solar power for electricity production comes from either photovoltaics or concentrating solar power plants. The former has seen rapid growth and expansion due to the rapid fall in global prices, while the latter has seen moderate growth due to ability to cheaply store thermal energy for later use. Hybridization, or combining photovoltaics with concentrating solar power represents a potential way for lowering cost while enabling long term storage. Over 5 GW of capacity exist worldwide using parabolic trough style technology for concentrating solar power which presents a unique option for optimization in the form of a photovoltaic retrofit. While it …

Cost Analysis Of Optimized Islanded Energy Systems In A Dispersed Air Base Conflict, Jay F. Pearson, Torrey J. Wagner, Justin D. Delorit

Faculty Publications

The United States Air Force has implemented a dispersed air base strategy to enhance mission effectiveness for near-peer conflicts. Asset dispersal places many smaller bases across a wide geographic area, which increases resupply requirements and logistical complexity. Hybrid energy systems reduce resupply requirements through sustainable, off-grid energy production. This paper presents a novel hybrid energy renewable delivery system (HERDS) model capable of (1) selecting the optimal hybrid energy system design that meets demand at the lowest net present cost and (2) optimizing the delivery of the selected system using existing Air Force cargo aircraft. The novelty of the model’s capabilities …

Design Aspects, Energy Consumption Evaluation, And Offset For Drinking Water Treatment Operation, Saria Bukhary, Jacimaria Batista, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

Drinking water treatment, wastewater treatment, and water distribution are energy-intensive processes. The goal of this study was to design the unit processes of an existing drinking water treatment plant (DWTP), evaluate the associated energy consumption, and then offset it using solar photovoltaics (PVs) to reduce carbon emissions. The selected DWTP, situated in the southwestern United States, utilizes coagulation, flocculation, sedimentation, filtration, and chlorination to treat 3.94 m3 of local river water per second. Based on the energy consumption determined for each unit process (validated using the plant’s data) and the plant’s available landholding, the DWTP was sized for solar PV …

A Multi-Criteria Logistics Analysis Of Photovoltaic Modules For Remote Applications, Nathan Thomsen [*], Dimitri Papazoglou, Torrey J. Wagner, Andrew J. Hoisington, Steven J. Schuldt

Faculty Publications

Reliable electrical power grids are frequently unavailable or inaccessible in remote locations, including developing nation communities, humanitarian relief camps, isolated construction sites, and military contingency bases. This often requires sites to rely on costly generators and continuous fuel supply. Renewable energy systems (RES) in the form of photovoltaic (PV) arrays and energy storage present a rapidly improving alternative to power these remote locations. Previous RES literature and PV optimization models focused on economics, reliability, and environmental concerns, neglecting the importance of logistics factors in remote installations. This paper proposes additional optimization variables applicable to remote PV systems and compares PV …

Machine Learning Modeling Of Horizontal Photovoltaics Using Weather And Location Data, Christil Pasion, Torrey J. Wagner, Clay Koschnick, Steven J. Schuldt, Jada B. Williams, Kevin Hallinan

Faculty Publications

Solar energy is a key renewable energy source; however, its intermittent nature and potential for use in distributed systems make power prediction an important aspect of grid integration. This research analyzed a variety of machine learning techniques to predict power output for horizontal solar panels using 14 months of data collected from 12 northern-hemisphere locations. We performed our data collection and analysis in the absence of irradiation data—an approach not commonly found in prior literature. Using latitude, month, hour, ambient temperature, pressure, humidity, wind speed, and cloud ceiling as independent variables, a distributed random forest regression algorithm modeled the combined …

An Analysis Of Energy Consumption And The Use Of Renewables For A Small Drinking Water Treatment Plant, Saria Bukhary, Jacimara Batista, Sajjad Ahmad

Civil and Environmental Engineering and Construction Faculty Research

One of the pressing issues currently faced by the water industry is incorporating sustainability considerations into design practice and reducing the carbon emissions of energy-intensive processes. Water treatment, an indispensable step for safeguarding public health, is an energy-intensive process. The purpose of this study was to analyze the energy consumption of an existing drinking water treatment plant (DWTP), then conduct a modeling study for using photovoltaics (PVs) to offset that energy consumption, and thus reduce emissions. The selected plant, located in southwestern United States, treats 0.425 m3 of groundwater per second by utilizing the processes of coagulation, filtration, and disinfection. …

City Of New Smyrna Beach Solar Feasibility Assessment, Florida Solar Energy Center, Charles Withers, Jr.

FSEC Energy Research Center®

At the request of the City of New Smyrna Beach, the Florida Solar Energy Center (FSEC) assessed rooftop solar and building energy efficiency improvement potential for 17 city-owned facilities. The intent has been to assist City leaders in identifying opportunities to reduce the City's overall electricity consumption and increase its use of renewable energy.

The FSEC team conducted Level 1 energy audit activities and site assessments including:

On-site assessment

• Solar feasibility measurements and characterization including orientation, roof shading (adjacent structures, encroaching trees, etc.), available roof area, system output, annualized savings
• HVAC characterization
• Lighting survey
• Occupancy density, schedule, thermostat settings

Post …

Transformative And Disruptive Role Of Local Direct Current Power Networks In Power And Transportation Sectors, Prahaladh Paniyil, Rajendra Singh, Amir A. Asif, Vishwas Powar, Guneet Bedi, John Kimsey

Publications

The power sector is about to undergo a major disruptive transformation. In this paper, we have discussed the best possible energy solution for addressing the challenges of climate change and eradication of energy poverty. This paper focusses on the decentralized power generation, storage and distribution through photovoltaics and lithium batteries. It encompasses the need for local direct current (DC) power through the factors driving this change. The importance of local DC power in the transportation sector is also established. Finally, we conclude with data bolstering our argument towards the paradigm shift in the power network.

Ultraefficient Thermophotovoltaic Power Conversion By Band-Edge Spectral Filtering, Z. Omair, G. Scranton, L. M. Pazos-Outón, T. P. Xiao, M. A. Steiner, Vidya Ganapati, P. F. Peterson, J. Holzrichter, H. Atwater, E. Yablonovitch

Engineering Faculty Works

Thermophotovoltaic power conversion utilizes thermal radiation from a local heat source to generate electricity in a photovoltaic cell. It was shown in recent years that the addition of a highly reflective rear mirror to a solar cell maximizes the extraction of luminescence. This, in turn, boosts the voltage, enabling the creation of record-breaking solar efficiency. Now we report that the rear mirror can be used to create thermophotovoltaic systems with unprecedented high thermophotovoltaic efficiency. This mirror reflects low-energy infrared photons back into the heat source, recovering their energy. Therefore, the rear mirror serves a dual function; boosting the voltage and …

Plasmonic Metamaterials: Physical Background And Some Technological Applications, Benjamin G. Schmidt

Senior Honors Theses

New technological frontiers appear every year, and few are as intriguing as the field of plasmonic metamaterials (PMMs). These uniquely designed materials use coherent electron oscillations to accomplish an astonishing array of tasks, and they present diverse opportunities in many scientific fields.

This paper consists of an explanation of the scientific background of PMMs and some technological applications of these fascinating materials. The physics section addresses the foundational concepts necessary to understand the operation of PMMs, while the technology section addresses various applications, like precise biological and chemical sensors, cloaking devices for several frequency ranges, nanoscale photovoltaics, experimental optical computing …

Performance Of A Campus Photovoltaic Electric Vehicle Charging Station In A Temperate Climate, Ayda Esfandyari, Brian Norton, Michael Conlon, Sarah J. Mccormack

Articles

A photovoltaic (PV) array can be combined with battery energy storage to satisfy the electrical demand of lightweight electric vehicles. Measured solar resource and vehicle energy consumption, together with locational, mechanical and electrical constraints were used to design a vehicle charging station comprised of a 63 m2 10.5 kW AC PV array, with a 9.6 kWh lithium-ion battery. PV output, battery charge and discharge, electricity flows were monitored over one year. Deviations between measured and calculated annual AC generation averaged to 14%. Average annual direct consumption, self-consumption and system self-sufficiency were 8.47%, 30.3% and 74.36% respectively.

Initial Field Testing Results From Building-Integrated Solar Energy Harvesting Windows Installation In Perth, Australia, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh

Research outputs 2014 to 2021

We report on the field testing datasets and performance evaluation results obtained from a commercial property-based visually-clear solar window installation site in Perth-Australia. This installation was fitted into a refurbished shopping center entrance porch and showcases the potential of glass curtain wall-based solar energy harvesting in built environments. In particular, we focus on photovoltaic (PV) performance characteristics such as the electric power output, specific yield, day-to-day consistency of peak output power, and the amounts of energy generated and stored daily. The dependencies of the generated electric power and stored energy on multiple environmental and geometric parameters are also studied. An …

Recent Developments In Solar Energy-Harvesting Technologies For Building Integration And Distributed Energy Generation, Mikhail Vasiliev, Mohammad Nur-E-Alam, Kamal Alameh

Research outputs 2014 to 2021

We present a review of the current state of the field for a rapidly evolving group of technologies related to solar energy harvesting in built environments. In particular, we focus on recent achievements in enabling the widespread distributed generation of electric energy assisted by energy capture in semi-transparent or even optically clear glazing systems and building wall areas. Whilst concentrating on recent cutting-edge results achieved in the integration of traditional photovoltaic device types into novel concentrator-type windows and glazings, we compare the main performance characteristics reported with these using more conventional (opaque or semi-transparent) solar cell technologies. A critical overview …

Semi-Transparent Energy-Harvesting Solar Concentrator Windows Employing Infrared Transmission-Enhanced Glass And Large-Area Microstructured Diffractive Elements, Mikhail Vasiliev, Kamal Alameh, Mohsin Badshah, Seok-Min Kim, Mohammad Alam

Research outputs 2014 to 2021

We report on the study of energy-harvesting performance in medium-size (400 cm²) glass-based semitransparent solar concentrators employing edge-mounted photovoltaic modules. Systems using several different types of glazing system architecture and containing embedded diffractive structures are prepared and characterized. The technological approaches to the rapid manufacture of large-area diffractive elements suitable for use in solar window-type concentrators are described. These elements enable the internal deflection and partial trapping of light inside glass-based concentrator windows. We focus on uncovering the potential of pattern-transfer polymer-based soft lithography for enabling both the improved photon collection probability at solar cell surfaces, and the …

Spectrally-Selective Energy-Harvesting Solar Windows For Public Infrastructure Applications, Mikhail Vasiliev, Kamal Alameh, Mohammad Alam

Research outputs 2014 to 2021

A study of photovoltaic solar window technologies is reported and it focuses on their structural features, functional materials, system development, and suitability for use in practical field applications including public infrastructures and agricultural installations. Energy generation performance characteristics are summarized and compared to theory-limit predictions. Working examples of pilot-trial solar window-based installations are described. We also report on achieving electric power outputs of about 25 Wp/m2 from clear and transparent large-area glass-based solar windows.

Multi-Mw Solar Pv Pumping System With Capacity Modulation And Battery Voltage Support, Oluwaseun M. Akeyo, Vandana Rallabandi, Dan M. Ionel

Power and Energy Institute of Kentucky Faculty Publications

Solar photovoltaic (PV) renewable energy systems are undergoing major technological developments and large-scale field deployment and electric grid integration. This paper proposes a method of expanding the capacity of an existing irrigation farm with additional pumps powered by solar PV. The system includes PV arrays and battery energy storage connected to a common dc bus, which energizes an array of variable speed inverter driven pumps. Capacity modulation is achieved by energizing an optimal number of pumps required in order to meet a particular load demand with minimum supply energy. A grid connection to the dc bus of the power electronic …

Measured Performance Of A High-Efficiency Solar-Assisted Heat Pump Water Heater, Florida Solar Energy Center, Carlos Colon

FSEC Energy Research Center®

This paper describes a novel solar photovoltaic-assisted heat pump water heater (PV-HPWH). The system uses two 310 Wp PV modules, micro-inverters and innovative controls to produce and store daily hot water. The system likely costs half that of solar thermal systems, with greater reliability, no freeze protection and potentially superior performance in cloudy locations. Moreover, no net metering is needed for the PV, which with two modules makes for a simple installation.The HPWH controls have been modified through experimentation such that higher tank temperatures are achieved during the day when solar availability is high while avoiding triggering the compressor during …

Compiled Research & Materials, Appendix K: Economic Impact Potential Of Solar Photovoltaics In Illinois, Illinois State University. Center For Renewable Energy

Sustainability and Energy

This 2013 study reviews the potential for economic impact of solar photovoltaics in the state of Illinois.

Cost Effectiveness Of Energy Efficiency And On-Site Photovoltaic Power For 2015 International Energy Conservation Code Eri (Energy Rating Index) Compliance, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

No abstract provided.

A Transfer Matrix Approach To Aid In The Design And Optimization Of Hybrid Advanced Passive Structures For Enhancing Photovoltaic Efficiency, James Walshe, Sarah Mccormack, Hind Ahmed, John Doran

Conference Papers

The addition of a luminescent down-shifting (LDS) layer directly onto a photovoltaic (PV) cell introduces additional loss mechanisms within the system. The combination of non-ideal photo-luminescent materials encapsulated within a limited range of viable host materials, with the increased reflection losses arising from the newly created interface represent losses which must be overcome for LDS to offer an enhancement to the underlying cells efficiency. Exploiting the interaction between the highly enhanced electric fields established close to a metal nanoparticles (MNP’s) surface is one route aimed at mitigating the poor optical properties of the luminophore-host combinations available. Alternative approaches, aimed at …

Lennar Ventures Power Purchase Agreement Analysis, Florida Solar Energy Center, Philip Fairey

FSEC Energy Research Center®

An analysis was performed to determine the cost-effectiveness of photovoltaic (PV) system Power Purchase Agreements for prototype homes in 13 United States climate locations. EnergyGauge® USA v.5.1 software was used to simulate the energy use of one-story, three-bedroom, 2000 ft² , single-family, frame prototype homes in thirteen representative U.S. climates comprising six IECC climate zones. The same software was used to simulate the power production of PV systems designed to provide approximately 75% of the annual electric energy required by the prototype homes. The net present value (NPV) of the photovoltaic PPA was then calculated as the difference in …

Design And Analysis Of Novel Ge-Gete Pn Junction For Photovoltaics, Andrew M. Jones, Ronald A. Coutu Jr., Robert A. Lake

Electrical and Computer Engineering Faculty Research and Publications

The continuing rise in demand for energy places a similarly increasing demand to improve power production methods and efficiency. In regards to solar power generation, one major limiting factor with existing photovoltaic (PV) systems is the management of heat produced and photon interactions with the PV device. Typical devices operate within the 300-1000 nm range of the solar spectrum, greatly limiting the range of photons used for power generation. Furthermore, since infrared light (