Engineering Commons^™

On-Line Realtime Water Quality Monitoring And Control For Swimming Pools, Paul Duffy, Gerard Woods, Sean O'Hogain, James Walsh, C. Caplier

Conference Papers

Effective swimming pool water quality monitoring and control systems are important to safeguard public health and for bather comfort. Most Irish swimming pool monitoring systems rely heavily on manual methods for sampling, testing and data recording of important parameters. Microbiological testing is infrequent and results can often take days. The goal of this research is to develop a water quality monitoring and control system with real time data logging, automatic data analysis, remote monitoring and control, microbiological sampling capabilities and online connectivity. National Instruments hardware and its software package LabView form the basis of the monitoring and control system. Several …

Preliminary Modelling Results For An Otto Cycle/Stirling Cycle Hybrid-Engine-Based Power Generation System, Barry Cullen, Jim Mcgovern, Michel Feidt, Stoian Petrescu

Conference Papers

This paper presents preliminary data and results for a system mathematical model for a proposed Otto Cycle / Stirling Cycle hybrid-engine-based power generation system. The system is a combined cycle system with the Stirling cycle machine operating as a bottoming cycle on the Otto cycle exhaust. The application considered is that of a stationary power generation scenario wherein the Stirling cycle engine operates as a waste heat recovery device on the exhaust stream of the Otto cycle engine. This paper is primarily concerned with the development of a model for a suitable Stirling cycle engine capable of running on the …

Development Of A Theoretical Decoupled Stirling Cycle Engine, Barry Cullen, Jim Mcgovern

Conference Papers

The Stirling cycle engine is gaining increasing attention in the current energy market as a clean, quiet and versatile prime mover for use in such situations as solar thermal generation, micro cogeneration and other micro distributed generation situations. A theoretical Stirling cycle engine model is developed. Using a theoretical decoupled engine configuration in which working space swept volume, volume variation, phase angle and dead space ratio are controlled via a black-box electronic controller, a model is developed that is to be used as a tool for analysis of the ideal Stirling cycle engine and the limits on its real world …

Economic And Environmental Performance Analysis Of Pv Systems For Domestic Applications In Ireland, Lacour Ayompe, Aidan Duffy, Sarah Mccormack, Michael Conlon

Conference Papers

Long-term monthly average daily solar radiation values on horizontal surfaces at 20 locations in Ireland were used to model the performance of a 1.72 kWp grid-connected PV system. Global solar radiation on horizontal surfaces varied between 865.1 and 1,127.9 kWh/m2/yr with a mean of 947.9 kWh/m2/yr. Annual energy yields varied between 869 and 1,156 960 kWh/kWp with a mean of 960 kWh/kWp. The capacity factor for the PV system varied between 9.9 and 13.2% while the mean was 11.0%. System cost parameters, long-term annual average electricity domestic rate cost escalation were used to calculate the Net Present Value (NPV), cost …

Therapeutic Ultrasound Angioplasty: The Risk Of Arterial Perforation. An In Vitro Study, Mark Wylie, Garrett Mcguinness, Graham Gavin

Conference Papers

The use of therapeutic ultrasound delivered via small diameter wire waveguides may represent an emerging minimally invasive approach in the treatment of chronic total occlusions (CTOs), calcified and fibrous plaques. The distal-tip mechanical vibrations (typically 0-210 μm peak-to-peak) have been reported to debulk rigid calcified and fibrous tissues while healthy elastic arterial tissue remains largely unaffected. The risk of arterial (healthy tissue) perforation with energized waveguides is not fully understood. An ultrasonic apparatus capable of delivering a range of wire waveguide distal-tip displacements, up to 80 μm peak-to-peak (p-p), at an operational frequency of 22.5 KHz (+/- 6%) has been …

Ultrasonic Angioplasty: Assessing The Risk Of Arterial Perforation, Mark Wylie, Garrett Mcguinness, Graham Gavin

Conference Papers

Atherosclerosis is a cardiovascular disease that effects large and medium muscular arteries (such as coronary and iliac) and also large elastic arteries (such as aorta) [1]. It causes thickening of the arterial wall and over time can result in a completely blocked artery or chronic total occlusion (CTO). While the majority of atherosclerotic lesions can be attempted by typical Percutaneous Transluminal Coronary Angioplasty (PTCA) such as balloon and stent implantation, calcified CTOs are often problematic as they do not lend themselves to be accessed by the guidewire which is required to implant the balloon and stent. Excessive guidewire pushing force …

Modelling And Simulation Of A Biomass Gasification-Solid Oxide Fuel Cell Combined Heat And Power Plant Using Aspen Plus, Wayne Doherty, Anthony Reynolds, David Kennedy

Conference Papers

In this paper the operation and performance of a high temperature solid oxide fuel cell (SOFC) stack on biomass syn-gas from a demonstration biomass gasification combined heat and power (CHP) plant is investigated. The objective of this work is to develop a computer simulation model of a biomass-SOFC CHP system, flexible enough for use in industry, capable of predicting system performance under various operating conditions and using diverse fuels. The biomass gasifier is of the dual fluidised bed (DFB) type with steam as the gasifying agent and is operated at atmospheric pressure. The tubular SOFC configuration, developed by Siemens Power …

Analysis Of Wear Models For Advanced Coated Materials, Simon Montgomery, David Kennedy, Noel O'Dowd

Conference Papers

Tribological tests, mathematical modelling and simulations have been conducted over the last few decades to investigate the nature and effects of mechanical wear in coated and uncoated materials. Mathematical models have been developed and in unison with specifically designed empirical tests, the veracity/capability of these models has been investigated. In more recent cases advanced engineering analysis tools, such as FEA and DOE, are used to further compliment and refine experimental techniques.

Studies have focused on the various wear mechanisms: abrasion, adhesion, erosion, corrosion wear, fatigue wear and also on different combinations of these. The intrinsic importance of the material in …

Alternative Sources Of Energy, David Kennedy

Conference Papers

Ireland relies on imports of fossil fuels for up to 83% of its energy needs and this statistic is relatively common in other European countries. Apart from the high import costs and pollutions associated with fossil fuels and the need to meet new targets in terms of CO2 emissions, energy security is essential. This paper provides an overview and outline of the different alternative energy sources available for use either at domestic or on large scale production, some of which are established and others less likely to succeed in our climate.
Some of the alternative energy sources such as wind …