Engineering Commons^™

Field Measurement Of Uncontrolled Air Flow And Depressurization In Restaurants, Florida Solar Energy Center, James Cummings

FSEC Energy Research Center®

Field investigations were done in seven restaurants (subsample of a 63 commercial buildings study) to identify uncontrolled air flows and pressure imbalances. Testing included building airtightness tests, identification of building air barrier location, duct system airtightness, characterization of pressure differentials, building air flow balance, and infiltration/ventilation rates. All restaurants were found to operate at negative pressures which ranged from -0.003 inWC (-0.8 Pa) to -0.173 inWC (-43 Pa) and averaged -0.051 inWC (-12.7 Pa) under normal operation. The variables which affect depressurization are large exhaust fans, missing or undersized make-up air, intermittent outdoor air caused by the cycling of air …

Method For Producing Conductive Or Insulating Feedthroughs In A Substrate, Janet K. Lumpp, Susan D. Allen

Mechanical Engineering - Daytona Beach

A method for producing feedthroughs in a substrate having a front and back surface, wherein the substrate either has a hole or absorbs radiation at a given wavelength. The method includes selecting and intimately bonding a sheet to the back surface of the substrate with an adhesive which is absorptive at the given wavelength. If the substrate has a hole, an exposed area of the sheet is illuminated with laser radiation at the given wavelength and at a power level sufficient to ablate a portion of the sheet behind the exposed area, thereby creating the feedthrough in the substrate. If …

1995 Strategic Plan For Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Roof Repair Contacting Tractor Manufacturers Inviting Donors to be Members

Tractor Test Museum Committee Minutes December 11, 1996, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Roof Repair Inviting Donors to be Members Treasurer's Report

Diffuse Energy Propagation On Heterogeneous Plates: Structural Acoustics Radiative Transfer Theory, Joseph A. Turner, Richard L. Weaver

Department of Engineering Mechanics: Faculty Publications

The propagation of diffuse energy on an unwetted flat plate with attached heterogeneities is examined using a statistical, multiple scattering approach. The statistically homogeneous heterogeneities lightly couple the membrane and flexural waves. The problem is formulated in terms of the Bethe–Salpeter equation, which governs the field covariance. It is reduced to a radiative transfer equation in the limit that the attenuations per wave number are small, i.e., when the heterogeneities are weak. This radiative transfer equation governs the diffuse energy propagation as a function of space, time, and propagation direction. Solutions of the radiative transfer equation are presented for the …

Arts, Computers And Artificial Intelligence, Sol Neeman Ph.D.

Engineering Studies Faculty Publications and Creative Works

Science and art seem to belong to different cultures. Science and technology, mainly the products of the intellect, use terminology and vocabulary that are concise and well defined. In contrast, in artistic expression, ambiguity is a powerful component. Still the relationship between these two different categories of human activity is interesting and fascinating. In this paper, a general comparison of these two disciplines will be introduced. Then the possibility of mechanical creation of art using computers and artificial intelligence will be discussed. This will be followed by two techniques which are used to create poetry and music. First, a statistical …

Preparing The Leaders For Mechatronics Education, Sema E. Alptekin

Industrial and Manufacturing Engineering

Mechatronics is the synergetic combination of precision mechanical engineering, electronic control and systems thinking in the design of products and processes. There is a need to develop interdisciplinary programs in Mechatronics that better prepare our graduates to design, build, and operate the products and systems of today and tomorrow. To address this need, National Science Foundation funded a project entitled "Preparing the Leaders for Mechatronics Education" undertaken by Cal Poly in 1995 - 1996. In this paper, the activities that took place during this two-year program is outlined. Several courses and course modules have already been developed and implemented by …

Development Of Outcome Assessments At Wpi, William W. Durgin, Lance Schachterle

Office of the Provost Scholarship

The WPl PLAN, adopted by the WPl faculty in 1970, strongly anticipates current thinking about student outcomes assessments by structuring degree requirements that mandate that students demonstrate their ability to perform professional functions embodied in ABET Criteria 2000, especially Criteria 3 and 4. The WPI faculty has also practiced both student and self evaluations of these outcomes through respectively grades and peer review (both departmental and campus-wide) of student performance.

Distributed Activation Energy Model Of Heterogeneous Coal Ignition, John C. Chen

Mechanical Engineering

We present a model that simulates the conventional tube-furnace experiment used for ignition studies. The Distributed Activation Energy Model of Ignition accounts for particle-to-particle variations in reactivity by having a single preexponential factor and a Gaussian distribution of activation energies among the particles. The results show that the model captures the key experimental observations, namely, the linear increase in ignition frequency with increasing gas temperature and the variation of the slope of the ignition frequency with oxygen concentration. The article also shows that adjustments to the model parameters permit a good fit with experimental data.

Characterization Of Sr‐Doped Lamno3 And Lacoo3 As Cathode Materials For A Doped Lagao3 Ceramic Fuel Cell, Kevin Huang, Man Feng, John B. Goodenough, Michael Schmerling

Faculty Publications

Energy dispersive spectrometry line scan and ac impedance spectroscopy were used in this study to investigate the chemical reactions between two cathode materials, La_0.84Sr_0.16MnO₃ (LSM), La_0.5Sr_0.5CoO_3-δ (LSC), and the electrolyte La_0.9Sr_0.1Ga_0.8Mg_0.2O_2.85 (LSGM). Significant interdiffusions of Co into LSGM and Ga into LSC were found at an LSC/LSGM interface even at relatively low fabrication temperatures. In contrast, only small interdiffusions of Mn into LSGM and Ga into LSM were detected at the LSM/LSGM interface even though it was fired at 1470°C. The …

History Of Applying Photovoltaics To Disaster Relief, Florida Solar Energy Center, William Young

FSEC Energy Research Center®

Hurricanes, floods, tornadoes, earthquakes, and other disasters can happen any place, any time. Major disasters destroy homes and businesses, and leave many people without adequate medical services, portable water, electrical service and communications. In response to the need for electrical service, solar energy offers a source of quite, safe, pollution-free power. Over the last few years, photovoltaic (solar electricity) power systems have provided energy for various disaster all over the country. Photovoltaics (PV) have been used to power vaccine refrigerators, medical equipment, lighting, radios, fans, communications, traffic devices and other electrical equipment. Previously, photovoltaics have supplied emergency power for Hurricane …

Chemcial Vapor Deposition Precursor Chemistry. 5. The Photolytic Laser Deposition Of Aluminum Thin Films By Chemical Vapor Deposition, John A. Glass, Seong-Don Hwang, Saswati Datta, Brian W. Robertson, James T. Spencer

Department of Mechanical and Materials Engineering: Faculty Publications

Thin films of very high purity aluminum were formed from the laser photolysis of trimethylamine alane (TMAA) using both ultraviolet (pulsed nitrogen) and visible (argon ion) laser irradiation on a variety of substrates including gold. Si (111), GaAs (110) and Teflon (PTFE). At thicknesses of up to 1 μm, nearly linear growth rates of 377 Ås^-1 and 112 Ås^-1 were observed. The formation of volatile species formed during the deposition of aluminum from TMAA was investigated by quadrupole mass spectrometry (QMS) of the reactant gas stream. The highest intensity post-deposition mass fragments were observed at m/z 58, …

Bounding Elastic Constants Of An Orthotropic Polycrystal Using Measurements Of The Microstructure, Brent L. Adams, M. J. Beran, T. A. Mason, Ted Olsen

Faculty Publications

We show how information about the elastic stiffness and compliance of an orthotropic polycrystal may be obtained from measurements of the statistical properties of the microstructure. We begin by discussing the statistical properties of the governing equations and the hierarchy that results when the equations are averaged. Perturbation solutions are obtained in terms of low-order statistical information. Using methods previously developed, we derive bounds for the elastic stiffnesses and compliances. A heirarchy of bounds is derived using the statistical information obtained from measurements of the microstructure. We discuss the methods used to obtain the correlation functions of the microstructure and …

How Contractors Really Size Air Conditioning Systems, Florida Solar Energy Center, Robin Vieira

FSEC Energy Research Center®

This paper presents results from 489 of the 5559 Florida air conditioning contractors surveyed (an 8.5% response rate) regarding equipment sizing methods in new residences. Air conditioning sizing is accomplished by using ACCA's Manual-J procedure by 33% of the respondents, software by 34.4% of the respondents, square-footage by 24.2% and other estimate procedures by about 8.4%. Those using square-footage estimates varied from 350 square-feet- per-ton to 700 square-feet-per-ton. Over a third of respondents indicated oversizing intentionally on some jobs, in order to avoid complaints, accommodate future expansions, enable quicker cooling down of homes, and to allow for lower cooling set …

Are Energy Savings Due To Ceiling Fans Just Hot Air?, Florida Solar Energy Center, Patrick James

FSEC Energy Research Center®

Human comfort studies have shown that people prefer higher temperatures when they are subjected to a breeze. Ceiling fans are often used to create air motion in residences. Simulation studies (including one given in this paper) have demonstrated that in Florida, using ceiling fans combined with raising a home's temperature 2° F will generate about a 14% net savings in annual cooling energy use (subtracting out the ceiling fan energy and accounting for internally released heat). This savings drops to 2.6% with a 1° F increase in set point and to a negative 3.7% savings with only a 0.5° F …

Recent Developments In Extrusion Freeform Fabrication (Eff) Utilizing Non-Aqueous Gel Casting Formulations, Greg Hilmas, John L. Lombardi, Robert A. Hoffman, Kevin Stuffle

Materials Science and Engineering Faculty Research & Creative Works

Extrusion Freeform Fabrication (EFF) was shown to be an extremely versatile method for fabricating Functionally Graded Materials (FGMs) The approach is inexpensive and potentially feasible for grading between any thermodynamically compatible ceramic-metal, ceramic-ceramic, or metal-metal material combination. Several material systems were investigated in this study including alumina-304 stainless steel, zirconia-304 stainless steel, alumina-Inconel 625, zirconiaInconel625, alumina-nickel aluminide, zirconia-nickel aluminide, titanium carbide-InconeI625, titanium diboride-nickel aluminide, and tungsten carbide-nickel aluminide. A controlled gradient was demonstrated between the end members for all of the above compositions. The FGMs were hot pressed to achieve near theoretical densities, providing flexural strengths as high as 1000 …

Proposal For Renovation Of 1920 Tractor Test Lab Into Museum, Tractor Museum

Lester F. Larsen Tractor Museum: Planning and Development Documents

Bids for Renovating Roof State Fair Display Further Funding for Renovation

Daylight Dimming Systems: Studies In Energy Savings And Efficiency, Florida Solar Energy Center, Lynn Schrum

FSEC Energy Research Center®

Three studies were conducted at Florida Solar Energy Center (FSEC) to study the lighting energy savings of daylight dimming systems. The Daylighting Test Facility (DTF) was used to study daylight dimming systems and how aperture orientation and blinds affect performance. The energy consumption was compared in two pairs of offices for all four window orientations: north, south, east and west. One office in each pair had blinds in a fixed position (down and open) and the other office had no blinds. The study showed that the energy savings ranged from 24% to 51% depending on the orientation and blinds.

The …

Measured Field Performance And Energy Savings Of Occupancy Sensors: Three Case Studies, Florida Solar Energy Center, David Floyd

FSEC Energy Research Center®

Occupancy sensors have the potential to significantly reduce energy use by switching off electrical loads when a normally occupied area is vacated. While occupancy sensors can be used to control a variety of load types, their most popular use has been to control lighting in commercial buildings. Manufacturers claim savings of 15% to 85%, although there is little published research to support the magnitude or timing of reductions. Energy savings and performance are directly related to the total wattage of the load being controlled, effectiveness of the previous control method, occupancy patterns within the space and proper sensor commissioning. In …

Solute Nucleation And Growth In Supercritical Fluid Mixtures, Gregory T. Smedley, Gerald Wilemski, W. Terry Rawlins, David B. Oakes, Prakash Joshi, William W. Durgin

Office of the Provost Scholarship

This research effort is directed toward two primary scientific objectives: (1) to determine the gravitational effect on the measurement of nucleation and growth rates near a critical point and (2) to investigate the nucleation process in supercritical fluids to aid in the evaluation and development of existing theoretical models and practical applications. A nucleation pulse method will be employed for this investigation using a rapid expansion to a supersaturated state that is maintained for ≈ 1 ms followed by a rapid recompression to a less supersaturated state that effectively terminates nucleation while permitting growth to continue. Nucleation, which occurs during …

Surface Modification Of Titanium Foil Substrates In Experimental Solar Cells, Richard Nishimuro, Omar S. Es-Said

Mechanical Engineering Faculty Works

A case study involving surface smoothing of titanium foil was obtained from a solar cell research company. It was believed that the rougher surface of metals was responsible for low solar cell efficiency when using titanium foil rather than glass as a substrate. A method was needed to reduce the surface asperity height of the titanium foil from the existing 1 μm to less than 0.1 μm. Several methods were investigated. The recommended method was the use of an excimer laser, a laser powered by excited noble gas-halide molecules as a lasing medium.

On The Excessive Porosity In The Welds Of Ams 4975 Titanium Air Compressor Rotor Duct, Stefanie Roberts, Rachel Hoang, Laura Pate, Joseph Foyos, Richard Nishimuro, Omar S. Es-Said

Mechanical Engineering Faculty Works

This case study deals with the existence of excessive porosity in the welds of an air compressor rotor duct. The duct does not meet the testing criteria because the diameters of the pores in the weld exceeded allowable specifications. As such, the duct failed inspection for excessive pore diameter and shrinkage due to welding. At this point, the part was beyond repair, and it was scrapped. The possible causes of failure were analyzed, and it was concluded that the source of the problem was the welding technique.

Characterization Of The Si/Sio2 Interface Formed By Remote Plasma Enhanced Chemical Vapor Deposition From Sih4/N2O With Or Without Chlorine Addition, Young-Bae Park, Xiaodong Li, Shi-Woo Rhee

Faculty Publications

The Si/SiO₂interface formed by remote plasma enhanced chemical vapor deposition (RPECVD) at low temperature with SiH₄/N₂O or SiH₄/N₂O/Cl₂ was studied and compared with thermal oxidation. The interface of the CVD SiO₂ without chlorine addition is rougher than that with chlorine addition. But the surface roughness of CVD SiO₂ films increases with chlorine addition. The thermal oxidation induces strong interface strains, and the strains generated by the CVD SiO₂ without chlorine addition are stronger and are distributed more nonuniformly than those by the chlorinated SiO₂. …

Laboratory Development For Mechatronics Education, Burford Furman, T. Hsu, Freidoon Barez, A. Tesfaye, J. Wang, P. Hsu, P. Reischl

Faculty Publications, Mechanical Engineering

This paper presents the strategy for developing the “Mechatronic Engineering Laboratory” at the authors’ university. The laboratory development was a principal part of an award for “Undergraduate Curriculum Development on Mechatronic Systems Engineering” by the Division of Undergraduate Education of the National Science Foundation (NSF). Major tasks involved in the award include the development and implementation of five new courses and a new laboratory. The purpose of the new laboratory is to support instruction of two of the five new courses: ME 105 Fundamentals of Mechatronic Systems Engineering and ME 190 Electromechanical Systems and Microprocessor Applications.

Microstructure And Deposition Rate Of Aluminum Thin Films From Chemical Vapor Deposition With Dimethylethylamine Alane, Byoung-Youp Kim, Xiaodong Li, Shi-Woo Rhee

Faculty Publications

Deposition of aluminumfilm from DMEAA in the temperature range of 100–300 °C has been studied. In this temperature range, there is a maximum deposition rate at around 150 °C. The film deposited at 190 °C has elongated blocklike grain shapes, which are ∼600 nm in width and 930 nm in length. Grains in the film deposited at 150 °C showed an equiaxed structure with grain size in the range of 100–300 nm in a film with 600 nm thickness. Aluminum oxide particle inclusion was observed especially at high deposition temperature. Plausible reaction pathways of DMEAA dissociation were suggested to explain …

Demonstration Of Cooling Savings Of Light Colored Roof Surfacing In Florida Commercial Buildings: Our Savior's School, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

Architects and designers have long known that light-colored building roofs can reduce cooling needs. Recently, monitoring studies in Florida have made an effort to quantify these savings. Experiments in existing residences have shown that a white reflective roof can reduce cooling requirements by an average of 20%. However, until now there has been no investigation in Florida's climate to examine the potential in commercial scale buildings.

To remedy this need, a two year study was performed on a private elementary school building in Cocoa Beach, Florida. Our Savior's Elementary School was monitored for an entire year in a base line …

Modeling Of Macroscopic/Microscopic Transport Phenomena In Zeolite Crystal Solutions Under Microgravity Conditions, Andreas Alexandrou, Nikos A. Gatsonis, William W. Durgin, Albert Sacco, Jr.

Office of the Provost Scholarship

Crystals grown from special liquid solutions find important industrial applications. Most often the physics and chemistry of the growth processes are not well understood due to complex microscopic chemical and thermo-fluid phenomena. Microgravity could help elucidate these phenomena and allow the control of defect concentration and crystal size. We are proposing to study zeolites grown in silica solutions as a typical crystal growth system. By using macroscopic fluid dynamics, coupled with first-principle microscopic fluid physics and advanced particle simulations, we will study: (a) the effect of transport phenomena and nutrient flow under microgravity conditions along with (b) the nucleation process …

Flastar: Florida Alliance For Saving Taxes And Energy Resources. Final Report., Florida Solar Energy Center, John Sherwin

FSEC Energy Research Center®

This document comprises the final project report in supporting the demonstration of the pilot Florida Public Building Loan Concept. This loan program provides low cost funds to eligible public entities for upgrade of building energy systems. The FLASTAR program (Florida Alliance for Saving Taxes And Resources) was modeled after the successful Texas LoanSTAR project [1,2]. Within that program, funds provided from oil overcharges are loaned to various facilities for building system retrofits. These loans are repaid (with interest) from energy cost savings. As of the most recent reporting, the LoanSTAR program had saved the State of Texas some $13.7 million …

Results From A Comprehensive Residential Lighting Retrofit. 09-96, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

A single family residence in Miami, Florida was used as a case study to determine how residential lighting energy use could be reduced by substituting energy efficient lamps and fixtures. The three person household was chosen based both on its high utility bills and extensive use of interior lighting. A detailed audit revealed 40 lamps or bulbs on 26 controls (switches) with a total connected load of 2.5 kW.

All major energy using appliances in the home were sub-metered so that lighting and other plug loads could be differenced from the measured total power demand. Also, each of the individual …

Measured Impacts Of Air Conditioner Condenser Shading, Florida Solar Energy Center, Danny Parker

FSEC Energy Research Center®

A study has been conducted by the Florida Solar Energy Center (FSEC) to examine if space cooling energy savings can be achieved from shading of residential air conditioning (AC) condenser units. The investigation consisted of before-and-after experiments conducted on three homes over a two year period. A recent EPA study recommends shading of exterior AC condensers, using landscaping or other means, as a method to reduce space cooling energy use (Akbari et al., 1992).