Engineering Commons^™

Enabling An Equitable Energy Transition Through Inclusive Research, Michael Ash, Erin Baker, Mark Tuominen, Dhandapani Venkataraman, Matthew Burke, S. Castellanos, M. Cha, Gabe Chan, D. Djokic, J.C. Ford, Anna P. Goldstein, David Hsu, Matt Lacker, C. Miller, D. Nock, A.P. Ravikumar, Allison Bates, Anna Stefanopoulou, E Grubert, D.M Kammen, M. Pastor, S.Z, Attari, S. Carley, D.L Clark, D. Dean-Ryan, U. Kosar, Kerry Bowie, Tina Johnson

ETI Publications

Comprehensive and meaningful inclusion of marginalized communities within the research enterprise will be critical to ensuring an equitable, technology-informed, clean energy transition. We provide five key action items for government agencies and philanthropic institutions to operationalize the commitment to an equitable energy transition.

Floating Platform Effects On Power Generation In Spar And Semisubmersible Wind Turbines, Hannah M. Johlas, Luis A. Martínez-Tossas, Matthew J. Churchfield, Matthew A. Lackner, David P. Schmidt

Mechanical and Industrial Engineering Faculty Publication Series

The design and financing of commercial-scale floating offshore wind projects require a better understanding of how power generation differs between newer floating turbines and well-established fixed-bottom turbines. In floating turbines, platform mobility causes additional rotor motion that can change the time-averaged power generation. In this work, OpenFAST simulations examine the power generated by the National Renewable Energy Laboratory's 5-MW reference turbine mounted on the OC3-UMaine spar and OC4-DeepCWind semisubmersible floating platforms, subjected to extreme irregular waves and below-rated turbulent inflow wind from large-eddy simulations of a neutral atmospheric boundary layer. For these below-rated conditions, average power generation in floating turbines …

Robust Identification Of Dynamically Distinct Regions In Stratified Turbulence, Gavin D. Portwood, Stephen M. De Bruyn Kops, J. R. Taylor, H. Salehipour, C. P. Caulfield

Mechanical and Industrial Engineering Faculty Publication Series

we present a new robust method for identifying three dynamically distinct regions in a stratified turbulent flow, which we characterise as quiescent flow, intermittent layers, and turbulent patches. The method uses the cumulative filtered distribution function of the local density gradient to identify each region. We apply it to data from direct numerical simulations of homogeneous stratified turbulence, with unity Prandtl number, resolved on up to 8192x8192x4092 grid points. In addition to classifying regions consistently with contour plots of potential enstropy, our method identifies quiescent regions as regions where ∊ ⁄ νΝ² ~ Ο(1), layers as regions where …

Umass Amherst Energy Modeling Guidelines, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The Campus energy Modeling Guidelines were developed in 2015 as a resource on how to: i) generate energy models for campus buildings; ii) provide quality assurance review of current energy models; and iii) share UMass Amherst energy modeling input parameters with project design teams for them to establish a baseline building energy profile.

Umass Amherst Building Measurement, Verification, Coordination And Template Plan, Nariman Mostafavi, Ted Mendoza, Jeffrey G. Quackenbush, Sandy J. Beauregard, Jason J. Burbank, Mohamad Farzinmoghadam, Ludmilla Pavlova-Gillham, Kylie A. Landrey, Patricia O'Flaherty

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Building Measurement, Verification, Coordination and Template Plan was begun in 2013 and finalized in 2015 as a resource to project teams that undertake the measurement and verification of building systems during the first year of occupancy of a new building and renovation project, particularly projects undergoing LEED certification.

Syllabus: Introduction To Mechanical And Industrial Engineering, Erin Baker

Sustainability Education Resources

Student teams will explore engineering analysis and design under the theme of Engineering Sustainability: Energy and the Environment, incorporating economics, environmental impacts, and social concerns. ENGIN 113 is intended to introduce students to the fields of Mechanical Engineering and Industrial Engineering, and to provide students with important skills that they will need to be successful in college and the professional world. The specific course objectives are to:  Develop effective teamwork skills, including peer- and self-evaluation.  Practice critical thinking and engineering problem solving.  Take a systems approach to design, incorporating economics, environment, and social concerns  Develop information …

Classroom Exercise: Intro To Mechanical And Industrial Engineering, Erin Baker

Sustainability Education Resources

This classroom exercise was developed for Introduction to Mechanical and Industrial Engineering; Engineering Sustainability: Energy and the Environment. This is a freshman class with a class size of about 200. It is intended to get students to think critically about energy in the economy; to recognize the power of technological change; and to inspire them to work toward solving climate change.

Free Wake Potential Flow Vortex Wind Turbine Modeling: Advances In Parallel Processing And Integration Of Ground Effects, Nathaniel B. Develder

Masters Theses 1911 - February 2014

Potential flow simulations are a great engineering type, middle-ground approach to modeling complex aerodynamic systems, but quickly become computationally unwieldy for large domains. An N-body problem with N-squared interactions to calculate, this free wake vortex model of a wind turbine is well suited to parallel computation. This thesis discusses general trends in wind turbine modeling, a potential flow model of the rotor of the NREL 5MW reference turbine, various forms of parallel computing, current GPU hardware, and the application of ground effects to the model. In the vicinity of 200,000 points, current GPU hardware was found to be nearly 17 …

Towards Accessible, Usable Knowledge Frameworks In Engineering, Jeffrey Mcpherson

Masters Theses 1911 - February 2014

A substantial amount of research has been done in the field of engineering knowledge management, where countless ontologies have been developed for various applications within the engineering community. However, despite the success shown in these research efforts, the techniques have not been adopted by industry. This research aims to uncover the reasons for the slow adoption of engineering knowledge frameworks, namely ontologies, in industry.

There are two projects covered in this thesis. The first project is the development of a cross-domain ontology for the Biomesh Project, which spans the fields of mechanical engineering, biology, and anthropology. The biology community is …

Why Waste The Wind? A Look Into Small Scale Wind Energy, Mitchell Negus, Jon Swanton, Ben Chilcoat, Mark Settembrino

Student Showcase

The human race’s dependence on fossil fuels for energy generation has started to cause major changes in the environment. Climate change is a universal issue and it is evident that our current energy schematic is not sustainable. At the University of Massachusetts, small-scale wind power has the potential to be a key component in UMass’ energy portfolio as the university shifts from reliance on fossil fuels to renewable energy. Strategically placed turbines would produce clean, renewable energy, reduce greenhouse gas emissions, and help to decentralize energy dependence on the Central Heating Plant. Small-scale turbines, like the eddyGT, are tested technologies …

University Of Massachusetts Amherst 2012-2021 Capital Improvement Projects, Douglas Vigneau, Juanita Holler, University Of Massachusetts Building Authority, John Mathews, Ludmilla Pavlova-Gillham, Ezra Small

Campus Planning Master Plans

In 2013 the University of Massachusetts, on behalf of the University of Massachusetts Building Authority and Massachusetts Division of Capital Asset Management and Maintenance (DCAMM), submitted an Expanded Environmental Notification Form for the University's 2012 - 2021 Capital Improvement Plan to the Executive Office of Energy and Environmental Affairs (EOEEA) Massachusetts Environmental Policy Act Office (MEPA).

Taken individually, the majority of the Projects, comprising of 13 building/space, 7 site/landscape, and 5 facility/ utility scale improvement projects, do not require MEPA review as most of the Project sites are confined to infill areas on campus that are currently or …

Umass Amherst Green Building Guidelines 2013, Ludmilla Pavlova-Gillham, Ted Mendoza, Ezra Small, Patricia O'Flaherty, Nariman Mostafavi, Mohamed Farzinmoghadam, Somayeh Tabatabaee Pozveh

Campus Planning Reports and Plans

Facilities & Campus Services, Sustainable UMass and Campus Planning support sustainability and energy conservation initiatives by providing in-house resources to campus staff as well as designers and contractors working with the University. The UMass Amherst Green Building Guidelines provide a framework for approaching new construction and major renovation projects at UMass Amherst that are undergoing LEED certification by focusing the conversation on green building aspects that are most important to the campus. They are intended to be the beginning of a dynamic conversation between designers, environmental consultants and constructors, university stakeholders, and users of new high performance buildings.

Application Of Finite Element Method In Protein Normal Mode Analysis, Chiung-Fang Hsu

Masters Theses 1911 - February 2014

This study proposed a finite element procedure for protein normal mode analysis (NMA). The finite element model adopted the protein solvent-excluded surface to generate a homogeneous and isotropic volume. A simplified triangular approximation of coarse molecular surface was generated from the original surface model by using the Gaussian-based blurring technique. Similar to the widely adopted elastic network model, the finite element model holds a major advantage over standard all-atom normal mode analysis: the computationally expensive process of energy minimization that may distort the initial protein structure has been eliminated. This modification significantly increases the efficiency of normal mode analysis. In …

Techno-Economic Analysis Of Hydrogen Fuel Cell Systems Used As An Electricity Storage Technology In A Wind Farm With Large Amounts Of Intermittent Energy, Yash Sanghai

Masters Theses 1911 - February 2014

With the growing demand for electricity, renewable sources of energy have garnered a lot of support from all quarters. The problem with depending on these renewable sources is that the output from them is independent of the demand. Storage of electricity gives us an opportunity to effectively manage and balance the supply and demand of electricity. Fuel cells are a fast developing and market capturing technology that presents efficient means of storing electricity in the form of hydrogen. The aim of this research is to study the impact of integrating hydrogen fuel cell storage system with a wind farm to …

Background And Available Potential Energy In Numerical Simulations Of A Boussinesq Fluid, Shreyas S. Panse

Masters Theses 1911 - February 2014

In flows with stable density stratification, a portion of the gravitational potential energy is available for conversion to kinetic energy. The remainder is not and is called “background potential energy”. The partition of potential energy is analogous to the classical division of energy due to motion into its kinetic and internal components. Computing background and available potential energies is important for understanding stratified flows. In many numerical simulations, though, the Boussinesq approximations to the Navier-Stokes equations are employed. These approximations are not consistent with conservation of energy. In this thesis we re-derive the governing equations for a buoyancy driven fluid …

Activity Intent Recognition Of The Torso Based On Surface Electromyography And Inertial Measurement Units, Zhe Zhang

Masters Theses 1911 - February 2014

This thesis presents an activity mode intent recognition approach for safe, robust and reliable control of powered backbone exoskeleton. The thesis presents the background and a concept for a powered backbone exoskeleton that would work in parallel with a user. The necessary prerequisites for the thesis are presented, including the collection and processing of surface electromyography signals and inertial sensor data to recognize the user’s activity. The development of activity mode intent recognizer was described based on decision tree classification in order to leverage its computational efficiency. The intent recognizer is a high-level supervisory controller that belongs to a three-level …

Multi Rotor Wind Turbine Design And Cost Scaling, Preeti Verma

Masters Theses 1911 - February 2014

The current generation wind turbines are upscaled into multi megawatt range in terms of output power. However, the energy benefit from the turbine is offset by the increased mass and cost. Twenty MW wind turbines are now feasible with rotor diameters up to 200 m, according to a new report from the EU-funded UpWind project in 2011. The question is, how much bigger can wind turbines get realistically? One concept worth considering, and the one that is the subject of this thesis, is to have more than one rotor on a single support structure. Such turbines could have a greater …

Optimization Of Mixing In A Simulated Biomass Bed Reactor With A Center Feeding Tube, Michael T. Blatnik

Masters Theses 1911 - February 2014

Producing gasoline-type fuels from lignocellulosic biomass has two advantages over producing alcohol-type fuels from plant sugars: gasoline has superior fuel characteristics and plant lignin/cellulose does not compete with human food supplies. A promising technology for converting lignocellulose to fuel is catalytic fast pyrolysis (CFP). The process involves injecting finely ground biomass into a fluidized bed reactor (FBR) at high temperatures, which reduce the biomass to gases that react inside the catalyst particles. This entails complex hydrodynamics to efficiently mix a stream of biomass into a catalyst bed that is fluidized by a separate stream of inert gas. Understanding the hydrodynamics …

The Effect Of Leaves And Steel Support Cables On The Dynamic Properties Of Northern Red Oak (Quercus Rubra) With Co-Dominant Trunks, Mark Reiland

Masters Theses 1911 - February 2014

Natural frequency and damping ratio were measured for ten forest grown northern red oak trees with co-dominant trunks. Steels support cables were installed in the canopies of five of the sample trees prior to measurement. Free vibration testing was performed during periods when leaves were and were not present. An accelerometer mounted at the base of the co-dominant union measured the acceleration time history during the free vibration testing. Natural frequency was determined from the acceleration time history using power spectral density analysis. Damping ratios were calculated from the power spectral density plots using the half power bandwidth method.

Trees …

Large Excitonic Effects In Monolayers Of Molybdenum And Tungsten Dichalcogenides, Ashwin Ramasubramaniam

Mechanical and Industrial Engineering Faculty Publication Series

Quasiparticle band structures and optical properties of MoS2, MoSe2, MoTe2, WS2, and WSe2 monolayers are studied using the GW approximation in conjunction with the Bethe-Salpeter equation (BSE). The inclusion of two-particle excitations in the BSE approach reveals the presence of two strongly bound excitons (A and B) below the quasiparticle absorption onset arising from vertical transitions between a spin-orbit-split valence band and the conduction band at the K point of the Brillouin zone. The transition energies for monolayer MoS2, in particular, are shown to be in excellent agreement with available absorption and photoluminescence measurements. Excitation energies for the remaining monolayers …

Load Reduction Of Floating Wind Turbines Using Tuned Mass Dampers, Gordon M. Stewart

Masters Theses 1911 - February 2014

Offshore wind turbines have the potential to be an important part of the United States' energy production profile in the coming years. In order to accomplish this wind integration, offshore wind turbines need to be made more reliable and cost efficient to be competitive with other sources of energy. To capitalize on high speed and high quality winds over deep water, floating platforms for offshore wind turbines have been developed, but they suffer from greatly increased loading. One method to reduce loads in offshore wind turbines is the application of structural control techniques usually used in skyscrapers and bridges. Tuned …

Techniques For Industrial Implementation Of Emerging Semantic Technologies, Jay T. Breindel

Masters Theses 1911 - February 2014

Techniques for the industrial implementation of emerging semantic technologies are presented in this research. Every new design, project, and procedure within a company generates a considerable amount of new information and important knowledge. Furthermore, a tremendous amount of legacy knowledge already exists within companies in electronic and non-electronic formats. All of this generated knowledge results in the need for tools and techniques to represent, structure, and reuse this knowledge. Researchers have spent considerable time and effort developing semantic knowledge management systems, with anticipation that these tools will address these knowledge management needs. However, little has been done to implement these …

Simulations Of Non-Contact Creep In Regimes Of Mixed Dominance, Maija Benitz

Masters Theses 1911 - February 2014

Improvement of high temperature applications relies on the further development of ultra-high temperature materials (UHTMs). Higher performance and efficiency is driving the need for improvements in energy conversion and propulsion systems. Rocket nozzles, gas turbine engines and hypersonic aircraft depend on a better understanding of a material's performance at high temperatures. More specifically, the characterization of creep properties of high temperature materials is required. Conventional creep testing methods are limited to about 1700 degrees Celsius. Non-contact methods have been developed, which rotate spherical samples up to 33,000 rotations per second. A load is supplied by centripetal acceleration causing deformation of …

Viscoelastic Flow Through Contraction Geometries, Ashwin Karthik Sankaran

Masters Theses 1911 - February 2014

Contraction flow of viscoelastic fluids has been a benchmark problem in non-Newtonian fluid mechanics because it mimics flows occurring in a number of industrial applications. It is also of considerable interest to academia to gain fundamental understanding of factors that affect the evolution of vortices and a complete understanding of the dynamics for a simple polymeric fluid has not been achieved. In this two part study we investigate the effect of pre deformation of a Boger fluid in a contraction geometry and the flow of surfactants in a parallel contraction geometry.

Entry flow of a polymeric fluid results in the …

Development Of A Cost Minimizing Strategy To Mitigate Bird Mortalities In A Wind Farm, Karamvir Singh

Masters Theses 1911 - February 2014

Wind is the second largest renewable energy source after solar. It is one of the fastest growing sources of electricity in the world and currently of wind energy is installed in the United States and an additional is under construction (Office of Energy and Environment Affairs, 2011). For the growth of wind electricity, one of the most prominent environmental concerns relates to the death of birds, bats and other avian species resulting from collision with turbine blades.

This thesis develops a model that provides the optimal strategy of turning the turbines off in a wind farm for certain periods to …

Semi-Active Damping For An Intelligent Adaptive Ankle Prosthesis, Andrew K. Lapre

Masters Theses 1911 - February 2014

Modern lower limb prostheses are devices that replace missing limbs, making it possible for lower limb amputees to walk again. Most commercially available prosthetic limbs lack intelligence and passive adaptive capabilities, and none available can adapt on a step by step basis. Often, amputees experience a loss of terrain adaptability as well as stability, leaving the amputee with a severely altered gait. This work is focused on the development of a semi-active damping system for use in intelligent terrain adaptive ankle prostheses. The system designed consists of an optimized hydraulic cylinder with an electronic servo valve which throttles the hydraulic …

Effect Of Slip On Flow Past Superhydrophobic Cylinders, Pranesh Muralidhar

Masters Theses 1911 - February 2014

Superhydrophobic surfaces are a class of surfaces that have a microscale roughness imposed on an already hydrophobic surface, akin to a lotus leaf. These surfaces have been shown to produce significant drag reduction for both laminar and turbulent flows of water through large and small-scale channels. The goal of this thesis was to explore how these surfaces alter the vortex shedding dynamics of a cylindrical body when coated on its surface, thus leading to an alteration in drag and lift on these surfaces. A cylindrical body was chosen as it is a very nice representative bluff body and sets the …

Vibration Reduction Of Offshore Wind Turbines Using Tuned Liquid Column Dampers, Colin Roderick

Masters Theses 1911 - February 2014

Offshore wind turbines (OWTs) are becoming an accepted method for generating electricity. The environmental conditions of offshore locations often impose high wind and wave forces on OWTs making them susceptible to intense loading and undesirable vibrations. One method to reduce system vibrations is through the use of structural control devices typically utilized in civil structures. Tuned liquid column dampers (TLCDs) show great promise in the application to OWTs due to their high performance and low cost. This thesis examines the use of TLCDs in OWTs.

Equations of motion for limited degree-of-freedom TLCD-turbine models are presented. A baseline analysis of each …

Vortex-Induced Vibrations Of An Inclined Cylinder In Flow, Anil B. Jain

Masters Theses 1911 - February 2014

When a bluff body is placed in flow, vortices are shed downstream of the body. For the case of a bluff body with a circular cross-section (a cylinder) attached to a spring and a damper, when the frequency of vortex shedding is close to the natural frequency of the structure, the cylinder oscillates in a direction perpendicular to the flow. This is called Vortex Induced Vibration (VIV) and is a canonical problem in fluid-structure interactions. The majority of studies on VIV of a flexibly mounted rigid cylinder are for the cases where the flow direction is perpendicular to the long …

Finite Element Analysis Of A Femur To Deconstruct The Design Paradox Of Bone Curvature, Sameer Jade

Masters Theses 1911 - February 2014

The femur is the longest limb bone found in humans. Almost all the long limb bones found in terrestrial mammals, including the femur studied herein, have been observed to be loaded in bending and are curved longitudinally. The curvature in these long bones increases the bending stress developed in the bone, potentially reducing the bone’s load carrying capacity, i.e. its mechanical strength. Therefore, bone curvature poses a paradox in terms of the mechanical function of long limb bones. The aim of this study is to investigate and explain the role of longitudinal bone curvature in the design of long bones. …