Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 12 of 12
Full-Text Articles in Engineering
Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua
Research On Control Technology Of Aeroengine Heat Exchanger, Qingyang Jiang, Song Hua
Journal of System Simulation
Abstract: In order to solve the high temperature problem caused by the high speed of the synergistic aspirating engine, this paper designs a control algorithm for the heat exchanger. In the process of designing the control algorithm, considering the strong nonlinearity, uncertainty and strong coupling of the engine, The decoupling study of the multi-input and multi-output linear model of the heat exchanger is carried out. The decoupling effect of two different decoupling methods on the strongly coupled heat exchanger is obtained. The fuzzy decoupling PID controller has short adjustment time and overshoot. Small, conclusions with better decoupling effects.
Research On Cost-Effectiveness Analysis And Modeling Of Equipment, Yueqiang Zhao, An Shi, Mai Qiang, Yinyin Lin
Research On Cost-Effectiveness Analysis And Modeling Of Equipment, Yueqiang Zhao, An Shi, Mai Qiang, Yinyin Lin
Journal of System Simulation
Abstract: There are many methods to study the cost effectiveness analysis of equipment. It is very important to choose the right method and method combination . On this basis of analyzing and sorting out the research status at home and abroad, the collation and comparative study of cost estimation methods and modeling methods are carried out.The methods and classifications of effectiveness evaluation and calculating and aggregating efficiency indicators are sorted out. The methods suitable for cost-effectiveness analysis and decision-making are summarized. The characteristics of these methods in the analysis of equipment system and their applicability to engineering application are pointed …
Modeling And Simulation Of Missile Trajectory Based On Practical Sampling, Wu Shuai, Xiaohua Zhou, Lili Wang, Xingzhong Yao
Modeling And Simulation Of Missile Trajectory Based On Practical Sampling, Wu Shuai, Xiaohua Zhou, Lili Wang, Xingzhong Yao
Journal of System Simulation
Abstract: Aiming at the problem of lacking the proper simulation method for missile trajectory in combat simulation training, this paper analyzes the limitations of the 6D and 3D simulation models, proposes a method of trajectory simulation with missile kinematics model and history measured data, and taking an air-to-surface ballistic missile with midcourse-terminal guidance as an example, describes the model construction process in detail. Through the verification, validation and simulation experiments, it shows that this method can simulate various types of missile trajectory with high confidence on both sides of “red and blue”, which has an important reference meaning for missile …
The Method Of Calculating The Middle Simple Locomotive And The Train Composition In The Turnover Point Based On The Modeling In The Conditions Of A Pair Traffic Of Trains, M.N. Masharipov
Journal of Tashkent Institute of Railway Engineers
The article developed a method for calculating the average downtime of a locomotive and the composition of a train at a turnaround point based on modeling in a pair train schedule. As a result of this, it is scientifically substantiated that strict adherence to the principle “trains do not expect a locomotive” will lead to a significant increase in the cost of locomotive hours at the point of turnover
Gis-Based Approach For Sinkhole Occurrence Risk Mitigation In Urban Areas For Historic Wieliczka Salt Mine, Agnieszka Malinowska, Ryszard Hejmanowski
Gis-Based Approach For Sinkhole Occurrence Risk Mitigation In Urban Areas For Historic Wieliczka Salt Mine, Agnieszka Malinowska, Ryszard Hejmanowski
Gorniy vestnik Uzbekistana
The article presents the results of the definition of a new methodology for assessing the risk of flooding a shallow slotted mine, which was carried out on the square above the Wieliczka Salt Mine, which is a world heritage. Vertical stresses are estimated on the basis of the theoretical state of rock mass deformation in the area of test chambers. In addition, the risk for chambers indicated in the zone was calculated based on the theory of arctic pressure. The final stage of the study was spatial analysis, which led to the identification of chambers, potentially subject to the influence …
On The Application Of Information Technology For The Development Of Software For Automation The Modeling Process Of Wagons At Wagon Enterprises Jsc "O'Zbekiston Temir Yo'llari", V.P. Bubnov, Sh. Kh. Sultonov
On The Application Of Information Technology For The Development Of Software For Automation The Modeling Process Of Wagons At Wagon Enterprises Jsc "O'Zbekiston Temir Yo'llari", V.P. Bubnov, Sh. Kh. Sultonov
Journal of Tashkent Institute of Railway Engineers
The report presents a functional diagram of the developed software for calculating the values of loads acting on the wagon body. The stages of development and the main modules of a software product that implements mathematical calculations are defined. The issues of the software implementation of the presented algorithms using the object-oriented programming language C # are discussed. The performed engineering analysis using the values of loads obtained using the developed software is given. The developed program in C # language with the use of the integrated Visual Studio environment allows to increase the accuracy and reduce the time for …
Modeling And Timing Simulation Of Turbojet Engine Starting Process, Wang Lei, Liying Yang, Hongda Zhang, Yuqing He
Modeling And Timing Simulation Of Turbojet Engine Starting Process, Wang Lei, Liying Yang, Hongda Zhang, Yuqing He
Journal of System Simulation
Abstract: The turbojet engine is complicated in its starting process and requires collaboration and cooperation involving all the execution structures, thus higher demand is put forward for the control system. How to model the engine starting process, and then accurately describe and analyze the impact of actuator states on engine performance directly affect the engine control system performance. According to the working principle of the JetCat-P400 German turbojet starting process, the rotor speed mathematical model of the turbojet engine starting process is constructed by the component method. The parameters of the model are identified by combining the experimental data of …
Monometric Mapping Flotation Process At Mikheevskiy Furniture Factory, Yu.G. Nikitina, I.P. Poyezhaev, G.A. Myrzabek, R.A. Musaev
Monometric Mapping Flotation Process At Mikheevskiy Furniture Factory, Yu.G. Nikitina, I.P. Poyezhaev, G.A. Myrzabek, R.A. Musaev
Gorniy vestnik Uzbekistana
An integrated study on the sandstone hosted uranium deposits on the base of hydrodynamic simulation has been carried out to define optimal field opening schemes. The reservoir simulation and mass-transfer models for selected field opening schemes, ways of optimizing existing facilities and building of optimized scheme are the main results of this investigation.
Evaluation And Modeling Of Visual Fatigue In 3d Display Based On Ecg, Danli Wang, Xinpan Yang, Yue Kang, Haichen Hu
Evaluation And Modeling Of Visual Fatigue In 3d Display Based On Ecg, Danli Wang, Xinpan Yang, Yue Kang, Haichen Hu
Journal of System Simulation
Abstract: This study investigates and models the correlation between visual fatigue and ECG data by collecting the ECG data of the participants during watching 3D movies, combining with the subjective scores, the reaction time, and the questionnaires before and after the experiment. ECG data of 12 subjects were analyzed in both time and frequency domain. The results showed that subjective score and HR increased with the duration of viewing, while PNN50 decreased. Linear model of subjective score is established, and the R² of model is 0.930. Subjective questionnaires show significant changes in overall visual fatigue, dry eyes and nausea symptoms …
Historical Data Modeling Based On State Observation, Dong Ze, Erxin Yin
Historical Data Modeling Based On State Observation, Dong Ze, Erxin Yin
Journal of System Simulation
Abstract: Aiming at the problem that the conventional historical data modeling method can not overcome the influence of disturbance on modeling accuracy, a historical data modeling method based on state observation is proposed. In this method, the data with the characteristic from dynamic to steady state are selected from the historical data as the modeling data, which is subjected to zero initialization processing based on the final steady state value. The processed data is then divided into two segments. The first segment is used to track the state of the prediction model, and the final observed state is used as …
Modeling And Simulation Of The Crosstalk On Aircraft Arinc429 Data Bus, Xudong Shi, Ruowen Wang, Jialin Wang, Hongxu Zhao
Modeling And Simulation Of The Crosstalk On Aircraft Arinc429 Data Bus, Xudong Shi, Ruowen Wang, Jialin Wang, Hongxu Zhao
Journal of System Simulation
Abstract: Based on the theory of multi-conductor transmission line, the crosstalk between a single cable and a UTP (unshielded twisted pairs) cable was studied. The MATLAB and CST were employed to do the theoretical calculation and modeling respectively, and the comparison result proved the validity and accuracy of the proposed model. Based on the UTP model, the shielding layer was used to build the STP（shielded twisted-wire pairs） model according to the ARINC429 specification, and the crosstalk which caused by a large voltage transient happening on the adjacent power line on the aircraft was further analyzed. The distance and length of …
Channel Modeling And Simulation Of Wireless Underground Sensor Networks Based On Magnetic Induction Technology, Zhouzhou Liu, Shen Liang
Channel Modeling And Simulation Of Wireless Underground Sensor Networks Based On Magnetic Induction Technology, Zhouzhou Liu, Shen Liang
Journal of System Simulation
Abstract: Aiming at the problem of high path loss, huge dynamic changes of channel conditions and large antenna size of the electromagnetic wave communication channel in wireless underground sensor networks ( WUSN), the channel characteristics of magnetic induction (MI) in the process of WUSN transmission are studied and the transmission principle of harmonic source in soil strata is analyzed. The influence of the polarization direction of the coil and the eddy current loss coefficient on the channel model is analyzed by the transmission equivalent circuit diagram, and the influence of the change of the frequency and the distance on the …