Engineering Commons^™

Investigating Van Der Waals Josephson Junctions With 2h-Nbse2 And 1t’-Wte2, Kristine Lorraine Haley

UNLV Theses, Dissertations, Professional Papers, and Capstones

Josephson junctions have garnered significant attention due to their unique electronic properties and applications in quantum devices. In this thesis, we investigate the fabrication processes and characterization of two-dimensional (2D) Josephson junctions consisting of layered van der Waals materials: niobium diselenide (2H-NbSe2) and few layered tungsten ditelluride (1T’-WTe2). The reduction of dimensionality can bring forth unique characteristics in certain materials that are not seen in their bulk counterparts, making them prime candidates for physical exploration. 2H-NbSe2 is an s-wave superconductor at temperatures near and below 7 K. 1T’-WTe2 is a semimetal in bulk but is an intrinsic quantum spin Hall …

A Dynamic Scoring Methodology For Morphing Airfoil Designs With Application To A Stalling Scenario, Stone Wachs

UNLV Theses, Dissertations, Professional Papers, and Capstones

Shape Changing Airfoils (SCAs) are a developing technology with potential aircraft applications. Leading aerospace corporations are actively researching SCA capabilities. The necessity for this technology stems from the requirement of control surfaces for safe aircraft control. However, the process of testing and determining optimal SCA designs can be costly and time-consuming. While methodologies exist, they often require specific scenario examples and lack a standard approach. To address this issue, a standardized methodology is needed that can be applied to various applications and scenarios. This methodology consists of computational/experimentally produced data for airfoils, a subjective and strategic scoring equation, an algorithmic …

Improving Multi-Crane Planning On Construction Sites, Ali Khodabandelu

UNLV Theses, Dissertations, Professional Papers, and Capstones

Designing the configuration of tower cranes, managing their operations, and coordinating material logistics are intricate processes that wield significant influence over the time, cost, productivity, and safety of construction projects. This complexity stems from the multitude of layout configurations, diverse crane types, varied tasks, and material supply points, all interacting within a dynamic environment. Collisions pose a heightened risk due to overlapping crane areas, further adding complexity to the planning of crane layouts and operations. Optimizing crane layout and operational planning while ensuring safety requires establishing effective connections between tasks, cranes, and material supply locations. Traditionally, research and industry practices …

Optimized Indoor Temperature In Office Buildings Through Personalized Thermal Comfort Modeling, Raviteja Patchava

UNLV Theses, Dissertations, Professional Papers, and Capstones

Building occupants experience varying thermal comforts at static indoor set-point temperatures due to variances in preferences, needs, and activities, both within and among individuals. Despite advancement in smart building control systems, many building occupants remain dissatisfied with indoor temperatures. This study developed and created an optimization model to predict the optimized indoor temperature preferences in multiple-occupancy settings. To achieve this, personalized thermal comfort models for each occupant in a multiple occupancy space were developed. The personal comfort models serve as the foundation for predicting their individual thermal preference and developing indoor temperature optimization model. When predicting the individual thermal preference, …

Performance Comparison Of Design-Bid-Build (Dbb), Design-Build (Db) And Construction Management-At-Risk (Cmar) Methods, And Identification Of Critical Success Factors For Db And Cmar In Water And Wastewater Projects, Shrijan Shrestha

UNLV Theses, Dissertations, Professional Papers, and Capstones

The United States encounters numerous challenges within the water and wastewater sectors. The American Water Works Association mandates a capital investment of $1.3 trillion over the next 25 years for the restoration and renewal of water infrastructures throughout the United States. (AWWA). To design and construct cost-effective and time-efficient water and wastewater facilities without compromising the infrastructure quality, owners are adopting alternative approaches to project delivery like Construction Management-at-Risk (CMAR) and Design-Build (DB). These approaches introduce innovation and integration into project delivery, addressing specific limitations inherent in the traditional Design-Bid-Build (DBB) method. The rise in utilization of alternative delivery methodologies …

An Exploratory Pilot Study On Generating An Emergency Evacuation Vr Experience For A Real-Life Building Without Existing Bim Or Floor Plans, Naveed Ahmed

UNLV Theses, Dissertations, Professional Papers, and Capstones

With the rising frequency of active shooter incidents and fire hazards in both private and public facilities, it is crucial to establish a strategy for an effective emergency evacuation response for minimizing its consequences. Modern technological advancements such as virtual reality (VR) and game engines offer the potential to serve as valuable evacuation training tools within a virtual environment, aiding real-time decision making. Previous studies highlight the benefits of using VR simulations for emergency evacuation training, enhancing safety; however, two challenging factors exist that hinder their application. First, many existing structures (especially for older buildings) lack an available computer model/approach. …

Investigating A Passive Treatment System For The Removal Of Nutrients From Urban Runoff, Jasminn Gray

UNLV Theses, Dissertations, Professional Papers, and Capstones

The Environmental Protection Agency recognizes urban runoff as a major contributor of surface water pollution with nutrients as the second largest cause of surface water impairment in the United States. While a water quality standard of 100 lbs/day total phosphorus load allocation for all nonpoint sources is permitted for the Las Vegas Valley (LVV) under the National Pollutant Discharge Elimination System, currently there is not a counterpart standard for nitrogen. With the continued development of the LVV and the depletion of the quantity of water in Lake Mead due to the ongoing drought, the concentrations of phosphorus and nitrogen species …

Application Of Biochar For Antibiotic-Free Nutrient Recovery From Source-Separated Human Urine, Sayeda Ummeh Masrura

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, the application of biochar as a soil amendment has gained attention as a potential solution for nutrient management and environmental remediation. Biochar, a carbon-rich material produced through the pyrolysis of biomass under oxygen-limited conditions, exhibits unique physicochemical properties making it an effective sorbent for nutrients and contaminants. Its high surface area, porosity, and stability provide an ideal matrix for nutrient retention and release, as well as the immobilization of pollutants. One area of particular interest is the application of biochar for nutrient recovery from source-separated human urine. Source separation of urine has gained momentum as a sustainable …

Travel Time Theory For Traffic Conservation Laws With Applications, Sergio Contreras

UNLV Theses, Dissertations, Professional Papers, and Capstones

Travel time is an important concept in various intelligent transportation system (ITS) applications. The concept is used in a wide array of applications, such as system planning, system performance, and optimization. Reducing the time required to travel between different points on a network is an important goal. Benefits include reducing time wasted in traveling, and keeping travelers satisfied. Thus, studying and reducing travel time in ITS is beneficial in different applications.The classic density-based Lighthill Whitman Richards (LWR) equation for modeling traffic flow is the starting point in this dissertation. A more recent travel time dynamics function built on top of …

Unraveling Water Quality Issues In The Colorado River Basin: Utilizing Remote Sensing Satellite Images, Statistical, And Machine Learning For Improved Monitoring, Godson Ebenezer Adjovu

UNLV Theses, Dissertations, Professional Papers, and Capstones

This research was aimed at exploring innovative and cost-effective tools in understanding the spatiotemporal variability of water quality parameters in the Colorado River Basin (CRB), which includes the Colorado River and major reservoirs and lakes in the USA including Lake Mead. The river which arises in the state of Colorado and empties into the Republic of Mexico at the Gulf of California, is a source of water to seven US states and the Republic of Mexico and provides water to about 40 million people and million acres of farmlands in seven states in the western US and the Republic of …

Virus Removal And Characterization During Secondary Treatment At A Full-Scale Plant, Tyler Hill

UNLV Theses, Dissertations, Professional Papers, and Capstones

Virus removal is paramount to water reuse applications and nearly all water reuse applications require extensive pathogen reduction because of high influent concentration, difficulty of detection and distinguishing infectivity. Typically, regulations stipulate virus attenuation that require the implementation of multi-barrier advanced treatment trains and award these reductions in log notation called log reduction values (LRVs). Reduction of virus concentrations are not awarded for virus removal that may occur in wastewater treatment steps which precede water reuse units such as activated sludge secondary biological treatment. A systematic literature review was performed and virus reduction at full-scale wastewater treatment plan was monitored …

Effects Of Loading Age And Transverse Reinforcement Ratio On Collapse Resistance Of Rc Frame Beams Under High Sustained Loads, Taiga Cibulka

UNLV Theses, Dissertations, Professional Papers, and Capstones

Catastrophic progressive collapses of reinforced concrete (RC) frame buildings can be triggered by column failure. In such a scenario, the beams supported by the failed column shall be able to form an alternative load path guarding the building against collapse. The compressive arch action passively generated after losing a column has been identified as an effective load-resisting mechanism for axially restrained RC frame beams. However, the beams need to continuously carry the redistributed gravity loads sustaining in the structural system. Past research predominantly focused on the short-time collapse resistance of RC beams and little is known about their time-dependent response …

Implementation Of Adas And Autonomy On Unlv Campus, Zillur Rahman

UNLV Theses, Dissertations, Professional Papers, and Capstones

The integration of Advanced Driving Assistance Systems (ADAS) and autonomous driving functionalities into contemporary vehicles has notably surged, driven by the remarkable progress in artificial intelligence (AI). These AI systems, capable of learning from real-world data, now exhibit the capability to perceive their surroundings via a suite of sensors, create optimal routes from source to destination, and execute vehicle control akin to a human driver. Within the context of this thesis, we undertake a comprehensive exploration of three distinct yet interrelated ADAS and Autonomy projects. Our central objective is the implementation of autonomous driving(AD) technology at UNLV campus, culminating in …

An Avalanche Transistor-Based Pulse Generator Design For Infrared Laser Applications, Abraham Lopez

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis details the design and results of a circuit intended for infrared laser applications, specifically for transcranial infrared light simulation (TILS) experiments and for use as a range finder. The circuit itself is comprised of a transistor, high voltage power supply, laser diode, capacitor, resistor, diode, and low voltage pulse. The design of a range finder is also developed. The range finder design is the same as the circuit developed for TILs with the addition of a few more components for receiving the returned light pulse such as a photodiode, op-amp, and comparator. The techniques used for a successful …

Facial Expression Recognition Using Convolutional Neural Networks (Cnns) And Generative Adversarial Networks (Gans) For Data Augmentation And Image Generation, Shekhar Singh

UNLV Theses, Dissertations, Professional Papers, and Capstones

Facial expressions play a crucial role in human communication, serving as a powerful means to convey emotions. However, classifying facial expressions using artificial intelligence (AI) can be challenging, especially with small datasets and images. Facial Expression Recognition (FER) is an active area of research, with Convolutional Neural Networks (CNNs) being widely employed for classification. In this research, we propose a CNN-based approach for FER that utilizes both original and augmented datasets to enhance classification accuracy. Experimental results on the FER2013 dataset show test accuracies of 63.39% and 64.59% for the original and augmented datasets, respectively, in a seven-class classification task. …

Development And Characterization Of Lead & Lead-Free Perovskite Solar Cell Materials, Rubaiya Murshed

UNLV Theses, Dissertations, Professional Papers, and Capstones

In recent years, perovskite photovoltaic technology has offered enormous viability and dimensionality in solar cell research. As a light-harvesting active layer, Perovskite generated remarkable development in device efficiency of 25.7% for the single-junction solar cell, and over 33% for the perovskite/silicon tandem solar cell. Also, perovskite-perovskite tandem solar cell (also called all-perovskite tandem solar cell) shows great potential in device performance and achieved a power conversion efficiency (PCE) of 26.4%. Transitioning photovoltaic technology from the laboratory to commercial products, high PCE, low cost, long lifetime, and low toxicity are some of the critical factors to consider during material selection. Pb-halide …

Development Of Pre-Magnetized Magnetorheological Elastomer For Bidirectionally Variable Stiffness Applications, Choonghan Lee

UNLV Theses, Dissertations, Professional Papers, and Capstones

Magnetorheological elastomers (MREs) utilize magnetic forces between ferromagnetic particles to cause variable stiffness properties and damping with external magnetic fields. In the MREs, the particles are embedded in a cured elastomer matrix, and an external magnetic field makes the stiffness change due to induced magnetic forces among particles. A disadvantage of the conventional MREs is that they cannot be softened (reduced stiffness) under an external magnetic field. Considering that there are many engineering applications where fast changes of stiffness in both directions (stiffening and softening) are required, embedding magnetically biased particles in the MRE can provide potential solutions. In this …

Survey Of How Irregularities In The Electrical System Of The Human Heart Link To Different Heart Arrhythmias, Jazmine Boloor

UNLV Theses, Dissertations, Professional Papers, and Capstones

This thesis explores the circuital pathway that a signal takes within the heart throughout a full heartbeat and provides a timing analysis. It then surveys the different pathways that could arise in the electrical system of the heart, and the associated heart diseases linked to the location of each pathway. Common heart arrhythmias such as atrioventricular nodal reentrant tachycardia, atrioventricular reentrant tachycardia, atrial flutter, and atrial fibrillation are surveyed, and their pathways are analyzed. Electrocardiograms are presented to aid in understanding of the timing analysis associated with irregularity in heart function. Finally, this thesis explores an avenue of the heartbeat …

Towards Cfd Investigations Into Particulate Air Pollution Of A Desert Urban Environment, Prosun Roy

UNLV Theses, Dissertations, Professional Papers, and Capstones

This dissertation has explored computational fluid dynamics (CFD) techniques for studying particulate air quality in the Las Vegas urban area. The dissertation is based on three research tasks:

• • High time-resolution fenceline air quality sensing and dispersion modeling for environmental justice-centered source attribution. (Chapter 2)
• • Pollen dispersion and deposition in real-world urban settings: A computational fluid dynamic study. (Chapter 3)
• • Effects of urban canopy parameterizations on modeling pollen dispersion and exposure. (Chapter 4)

In Chapter 2, we investigate the facilitation of low-cost air quality sensors (LCAQS) and CFD technique on exposure assessment of environmental justice (EJ) communities and …

Time-Dependent Wetting Behavior Of Hydrogels, Amir Kashani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Hydrogels are 3-D polymers with hygroscopic properties that enable them to absorb and retain large amounts of water. In many applications such as biomedical applications, including drug delivery, wound healing, tissue engineering, biosensors, and contact lenses, agriculture, food and beverage, cosmetics, and environmental, hydrogels also need to maintain a high degree of wetting in order to ensure effective functionality and interaction with surrounding fluids or tissues in desired applications. The combination of wetting and absorptive behavior of hydrogels that are often encountered in biomedical, biological, industrial and the mentioned applications presents a challenging physical problem that is not completely understood. …

An Investigation Of Soft Electrohydraulic Actuators: Theory, Characterization, And Conceptual Applications, Alexandrea Washington

UNLV Theses, Dissertations, Professional Papers, and Capstones

Electroactive polymer (EAP) materials are a novel soft electromechanical device that exploits the inherent electrical and mechanical advantages of flexible polymer materials. Within this groundbreaking field there are various actuator and sensor devices that have been developed for a variety of applications, from medical devices to artificial biological systems. This research focuses on electrohydraulic actuators, which are comprised of a flexible conductive medium, a dielectric fluid, and a compliant film material to encapsulate the dielectric fluid. This specific study centers around the electrohydraulic EAP actuator known as the Hydraulically Amplified Self-Healing Electrostatic (HASEL) actuator, first introduced by the Keplinger group …

High-Yield Bioinspired Atmospheric Water Capture Through Hydrogels, Yiwei Gao

UNLV Theses, Dissertations, Professional Papers, and Capstones

Water scarcity is a global issue affecting billions of people, and atmospheric water harvesting (AWH) technology has been identified as a potential solution. However, existing single-material AWH approaches have limited water harvesting yields due to alternated water capture, storage, and release stages, and only function within a high relative humidity range. In my doctoral research project, we developed a bio-inspired, hydrogel-based multi-layer AWH approach that allows for segregated capture, storage, and release stages, and is envisioned to have higher daily water harvesting efficiency even in low-humidity areas. My research began with understanding the relations between hydrogel mechanical stiffness, hydraulic permeability, …

Mathematical Modeling: Finite Element Analysis And Computations Arising In Fluid Dynamics And Biological Applications, Jorge Reyes

UNLV Theses, Dissertations, Professional Papers, and Capstones

It is often the case when attempting to capture real word phenomena that the resulting mathematical model is too difficult and even not feasible to be solved analytically. As a result, a computational approach is required and there exists many different methods to numerically solve models described by systems of partial differential equations. The Finite Element Method is one of them and it was pursued herein.This dissertation focuses on the finite element analysis and corresponding numerical computations of several different models. The first part consists of a study on two different fluid flow models: the main governing model of fluid …

Information-Theoretic Model Diagnostics (Infomod), Armin Esmaeilzadeh

UNLV Theses, Dissertations, Professional Papers, and Capstones

Model validation is a critical step in the development, deployment, and governance of machine learning models. During the validation process, the predictive power of a model is measured on unseen datasets with a variety of metrics such as Accuracy and F1-Scores for classification tasks. Although the most used metrics are easy to implement and understand, they are aggregate measures over all the segments of heterogeneous datasets, and therefore, they do not identify the performance variation of a model among different data segments. The lack of insight into how the model performs over segments of unseen datasets has raised significant challenges …

Development Of An Automated Gpib System For Characterization Of Sige Avalanche Photodiodes, David A. Santiago

UNLV Theses, Dissertations, Professional Papers, and Capstones

Photon counting is a technique in many modern technologies such as medical imaging and LiDAR systems. Photon counting is needed in many aspects of the development process for these technologies from photodetector characterization to operation of the finished product. This thesis will serve to solve the challenge of quantifying photodetector performance using automating test equipment with known software packages such as MATLAB to be able tocharacterize photodetectors in an efficient manner. A custom MATLAB program has been developed to interface with various instrumentation using a General-Purpose Interface Bus (GPIB) and a Prologix GPIB-USB controller that will be able to send …

Simulating Condensation In The Theory Of Classical Nucleation, David Vallet

UNLV Theses, Dissertations, Professional Papers, and Capstones

The scope of this thesis is to numerically investigate condensation that occurs in transonic and supersonic flows. Condensation shocks are a phenomenon that occurs within converging-diverging nozzles. There are many applications forconverging-diverging nozzles, such as thermovapour compressors (TVC), which are largely used for desalination. As water resources become more precious within the western United States there is a need to develop cost effective solutions for cleaning water. Steam generator power stations are another application where enhanced simulations and accuracy of design could improve efficiency and save on carbon emissions. Traditionally, numerical designs of transonic flows have been conducted with either …

Enhanced Iot-Based Electrocardiogram Monitoring System With Deep Learning, Jian Ni

UNLV Theses, Dissertations, Professional Papers, and Capstones

Due to the rapid development of computing and sensing technologies, Internet of Things (IoT)-based cardiac monitoring plays a crucial role in providing patients with cost-efficient solutions for long-term, continuous, and pervasive electrocardiogram (ECG) monitoring outside a hospital setting. In a typical IoT-based ECG monitoring system, ECG signals are picked up by sensors located on the edge, and then uploaded to the remote cloud servers. ECG interpretation is performed for the collected ECGs in the cloud servers and the analysis results can be made instantly available to the patients as well as their healthcare providers.In this dissertation, we first examine the …

A One-Dimensional Analysis Of A Microbial Fuel Cell For Efficient Acetate Removal And Power Density Output, David Rouhani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microbial fuel cells (MFCs) are electrochemical devices that utilize microorganisms to convert organic matter into electrical energy. MFCs have been discussed to have potential application for sustainable wastewater treatment due to their ability to generate electricity while simultaneously treating contaminated water. To optimize MFC performance, numerical models can be used to understand the complex electrochemical and biological processes occurring in the system. In this study, a numerical model was developed to simulate the performance of MFCs under varying operating conditions and to investigate the performance of a MFC for treating wastewater fuel. More specifically, the MFC was modeled to oxidize …

Monitoring And Classification Of Tissue Perfusion Through The Combined Use Of Thermal, Rgb, And Laser Speckle Contrast Imaging, Ivan Soto

UNLV Theses, Dissertations, Professional Papers, and Capstones

In cooperation with the UNLV School of Medicine, this thesis is part of a bigger project aimed at developing a post-op surgery device for the constant unattended monitoring of a patient’s tissue. This device is intended to monitor areas of surgical sites and detect any complications without the need for continuous supervision by medical professionals. One such complication includes inadequate tissue perfusion, or a lack of blood flow reaching a patient’s tissue. The role of this thesis is to fit a convolutional neural network model to the available data gathered from voluntary participants and attempt to classify the data as …

Spectroscopic Studies On Silicon And Chalcopyrite Materials For Solar Energy Applications, Amandee Hua

UNLV Theses, Dissertations, Professional Papers, and Capstones

In this dissertation, silicon-based materials for photovoltaics and chalcopyrite-based materials for photoelectrochemical water splitting are investigated using various spectroscopic and microscopic techniques. Although silicon dominates the photovoltaic market, further improvement can be made by using an alternative low temperature passivation approach. Currently, thermally grown SiO2 passivation is commonly used for silicon solar cells. However, this technique requires high processing temperatures (>800 °C), which increases the thermal budget, potentially decreases the bulk quality of Si, and can lead to difficulties in implementing in production lines. Here, a S-based passivation approach is studied that require lower processing temperatures of ~550 °C. …