Engineering Commons^™

Decomposition Method For Modeling And Research Of Pulse-Frequency Control Systems, A Kadirov, Amir A Kadirov

Technical science and innovation

. The pulse-frequency control systems are widely used in radar, space industry, for control of technological processes and robots and many other areas. Today, there are various approximate and accurate methods for the analysis and synthesis of pulse-frequency systems (PFS). However, the area of the practical application of the existed methods is mainly limited to single-variable systems. The classical methods provide the consideration of the initial structures of pulse-frequency systems as a whole. This article proposes the decomposition method for modeling and research pulse-frequency automatic control systems. The method is based on the mathematical apparatus of signal-flow graphs. We can …

Methods And Tools Of Cement Production Process (Comparative Analysis), Potential Of Uzbekistan In This Area, Khudaykulov Umid, S Turgunbayev

Technical science and innovation

the article describes the history of cement use, its initial appearance, cement composition and its physicochemical structure and properties, types of cement and classifications of cement. Cement production processes, technological methods used in production, advantages and disadvantages of the methods and technological stages of the production process by the drying method of cement production are covered. A study of the cement industry and processes in the country was conducted, which summarized the most priority methods and processes of cement production based on the natural resources, climate and potential of Uzbekistan.

Application Of The Ground Laser Scanning Results In Monitoring Of Adjacent Rock Masses Of Deep Careers, Sh Rahimov

Technical science and innovation

The method of laser scanning, used in combination with the traditional mine surveying, is one of the most effective and safest ways to carry out mine surveying and instrumental observations on deforming areas of open mining objects. The article presents the results of ground-based laser scanning of the Kharanutsky coal pit and a comparative analysis to determine the deformations and displacements of the sides for different periods, which was performed in the RISCAN PRO environment. Digital elevation models (DEM) were built, distinguishing observation cycles by color. As a result of comparison, the places of manifestation of deformations and displacements were …

Non-Contact Point Measuring Equipment For Robotic Systems Of Automobile Industry, J Khollhujayev, N Abdukarimov, J Mavlonov, N Abdivahidova

Technical science and innovation

The non-contact measurement method development is caused by the need for precise measurement and elimination of an operator’s errors. The purpose of the atticle research is to develop a reliable small scale prototype model of non-contact point measuring system. The mathematical model of robotic articulated arm has been developed to analyze the forward kinematics. Then, the prototype model of a robotic arm and laser-sensor mounted technique have been developed to take the measurements. The idea was derived from the coordinate measuring machine working principle, that puts the tip or tool center point in the known position with necessary precision. Most …

Numerical Calculation Of Electronic Circuits With Nonlinear Elements, X Sapaev, E Abduraimov, Sh Umarov

Technical science and innovation

Non-linear elements are widely used in various automation devices, converting and measuring equipment. They are often presented in the form of diode-resistive circuits. In single-circuit electrical circuits, their calculation by a numerical method reduces to compiling nonlinear equations and solving it using the Newton-Raphson method with specifying reasonable initial conditions for the calculation. The article is aimed at determining the dimensions of the Jacobi matrix in numerical calculations of nonlinear chains. Using the example of numerical calculation of two simplest schemes with nonlinear elements, it is shown that by eliminating the coordinate chain (system equations) from the system of equations …

A Method For Classifying Ecg Signals With Different Possible States On A Multilayer Perceptron, Sherzod Nematov, Y Talatov

Technical science and innovation

To automatically determine the state of the cardiovascular system based on the recorded ECG signals, an artificial neural network is trained to classify signals into various possible states. At the same time, the parameters of heart rate variability (HRV) were extracted from the ECG signals and used as input functions for the neural network. HRV is the fluctuation in the time intervals between adjacent heartbeats. For this, the architecture of a neural network based on a multilayer perceptron and a method for obtaining the necessary parameters in the learning process have been developed, and the classification efficiency has been checked …

Investigation Of The Moisture Binding Forms In Plant Raw Materials And Thermal Characteristics Determination, Tojiniso Raxmanova, Shaxnoza Sultanova, Jasur Safarov, Esra Capanoglu

Technical science and innovation

In this article, the forms of moisture connection and the thermal characteristics of plant materials are studied. Rosehip and hawthorn fruits were chosen as the object of research. In the heat analyzer, a decrease in the mass of the product and an increase in temperature were found when the temperature was controlled in a certain gas environment. The curves of the dependence of the dog rose and hawthorn samples on the mass and temperature are given. DTA-1/10 galvanometer sensitivity; sensitivity of the DTG-1/5 galvanometer; the maximum heating temperature is 300° С and the rate of change of the furnace heating …

Cosmostruct Ural Model Of The Malguzar Mountains For Ore Bearing Data Processing On The Laiyagun Mineralized Zone, A Abdullayev, O Zokirov, G Anna, E Kutie, Sh Akhmedov

Technical science and innovation

Analysis of geological prospecting, geological surveying, geochemical and other materials of the territory of the Malguzar Mountains allows us to note that here the ore-bearing formations are Silurian formations (sandstones, gravelstones, shales), crumpled into folds, which are complicated by a series of faults of north-west strike, zones of splitting and etc. These structures are rectilinear, their zone is characterized by the presence of small fracture structures, areas of swellings (Liyagun mineralized zone) and splits (Ardakshan area). The reason for these swelling and splitting, where gold mineralization is noted, remains not fully studied. The importance of studying these features of ore-controlling …

Estimation Of The Speed Of Rotation Of Gears In Oil Depending On The Load, Ramzjon Hamroyev, N Mirzayev, B Qurbonov

Technical science and innovation

This article shows the wear and the amount of load that occurs in the gears under different loads and under different operating conditions of the contact surfaces, and is given by the formulas. The values of loads and wear rates on gears are given in tabular form based on curves. According to the results of the study, an increase in the load value affects the wear rate, as well as the load values q = 100; 200; 300; 400; at N/mm, a decrease in the wear rate was found. The load concentration and accumulation of dislocations in the material, their …

Metrological Certification And Test Conditions For Verification Equipment, A Turgunbaev, H Usmanova, O Abdurakhmanov

Technical science and innovation

The article analyzes the metrological certification and test conditions for verification equipment. The main tasks of metrological certification, test conditions, accuracy characteristics of verification equipment, primary, repeated and periodic, expert and inspection certification of verification equipment are considered in the article. Besides, the major tasks of the testing equipment certification are considered as well. They are: establishing the current testing equipment eligibility in accordance with its purpose, establishing the actual reproducibility values of test conditions implemented by testing equipment and assessing the technical characteristics compliance of testing equipment with the safety, hygienic and other special requirements

Clearance Of Solid Household Waste With The Reception Of Alternative Types Of Energy Carriers, Rakhmatullayev F, Turabdhanov S

Technical science and innovation

The research is devoted to improving the technology of obtaining alternative types of energy carriers by applying methods of pyrolysis of unclaimed types of solid domestic wastes of biological origin, which also allow solving the tasks of improving the ecological situation in the places of formation. The practical value and relevance of this research lies in the development of advanced technology for obtaining alternative fuels. The proposed pyrolysis unit allows producing gaseous and liquid hydrocarbons in a continuous cycle. In the atmosphere of the gasifying agent (air, oxygen, water vapor, carbon dioxide or their mixture), the gasification process is primarily …

The Ways Of Rational Use Of Cooling Towers, D. N. Muhiddinov, S. Sanayev, B. B. Boliyev

Technical science and innovation

In order to improve the economic performance of the company, the establishment of rational water use schemes and the reduction of the use of fresh water obtained from water supply systems or natural bodies of water can become an important factor. Water-cooling circulating systems, where cooling towers are used as cooling facilities, are the basis of rational water use systems. In water recycling systems that need stable water cooling at high specific hydraulic and thermal loads, cooling towers are used. By spraying water with nozzles or irrigation devices, the surface of water needed to cool it by contact with air …

Increasing The Roughness Of The Procedure For Evaluating A Vector Of The Condition Of Objects To The Influence Of Uncertainty Factors, U.F. Mamirov

Technical science and innovation

Algorithms for increasing the roughness of the procedure for assessing the state vector of control objects to the influence of uncertainty factors are given. Expressions are obtained for extended state vectors and observations. Stable inversion algorithms are given for a nondegenerate block matrix with the allocation of its left and right zero divisors of maximum rank. The presented stable computational procedures allow us to regularize the problem of synthesis of algorithms for estimating the parameters of regulators in adaptive control systems with a customizable model and to improve the quality indicators of control processes under conditions of parametric uncertainty

Conditions Of Formation Of Sulfide Waters In Paragenesis With Evaporite And Oil And Gas-Based Formations In The Artesian Pools Of The Republic Of Uzbekistan, M. R. Juraev, G.A. Bimurzaev, B. H. Razykov, B. Kh. Khaidarov

Technical science and innovation

The lithological-facies factor is considered with the aim of studying the natural and geological conditions in which hydrogen sulfide waters are formed in gas and oil fields in the artesian basins of the Republic of Uzbekistan. The distribution of hydrogen sulfide waters is closely related to the areas of joint development of halogen rocks and oil and gas complexes. Since the term “paragenesis” refers to the joint finding of minerals or chemical elements genetically related, this map is a map of the paragenesis of hydrogen sulfide waters with evaporites and oil and gas complexes. In the absence of one of …

Numerical Calculation Of The Charge State And Electrostatic Potential Of A Binary Nanocluster Structure With Si2zns Cells In A Cubic Lattice Of Crystalline Silicon With A Diamond Structure, N.F. Zikrillaev, F.Q. Shakarov, M. K. Khaqqulov

Technical science and innovation

Numerical calculation of electronic and atomic structures of complex systems of crystalline and transitional nano- and micro-sizes by using quantum physical methods will make it possible to forecast new properties of crystalline silicon with various concentrations of clusters of impurity atoms, structural arrangement at lattice sites and types of clusters. The quantum-chemical method was used to calculate the required characteristics of the cell, i.e. the charge state and electrostatic potential for the base matrix of Si (silicon) and silicon with an impurity cluster consisting of 3 tetrahedral cells type- Si₂ZnS in the base lattice of Si. Calculation of …

Study On The Grinding Time Duration Impact On The Properties Of Paper From Alternative Raw Materials, Z. K. Galimova

Technical science and innovation

Both raw and recycled fiber materials are used for paper production. The increase in percentage use of the latter is due to their paper-forming properties, availability and low cost. The article explores the possibility of using pulp from the inner layer of mulberry twig bark. Mulberry twigs, after removing leaves, which are the main raw material in silk production, have no practical industrial application. Recycling waste - mulberry branches - for the production of pulp is therefore relevant as it is aimed at solving raw material and environmental problems. The purpose of this work is to use local raw materials …

Research Of The Stress-Strain State Of The Rock In Contact With The Elements Of The Drill Bit During Drilling, L.G. Toshniyozov, J.B. Toshov, Liu Songyong

Technical science and innovation

Research of the interaction of rock-cutting tools with rock with various approaches is presented in the article. In contrast to analytical and experimental methods with their limited and costly applicability, it is proposed to use numerical modeling to better represent the mechanics of rock destruction, to visualize the stages of destruction in a short time and in a cheaper way. This article allows to get an idea that using the finite element method can get mathematical modeling of plastic deformation, assess the stress-strain state of the bit and optimize the structural elements and working conditions of the rock cutting tool, …

Processing Of Slags Of Copper Manufacturing With The Use Of Ideal Mixing Equipment, S.T. Matkarimov, B.T. Berdiyarov, S.K. Nosirkhujayev, K.T. Ochildiyev, B.L. Marjorie

Technical science and innovation

The article discusses the issues of processing slag of copper production using devices that model ideal mixing. It has been shown that the use of this type of apparatus increases the efficiency of physical and chemical processes and significantly reduces the copper content in dump slags. It has been found that the process of reduction of ferric iron oxide by the clinker in the initial period takes place in the kinetic mode. After reducing the concentration of magnetite (3-5%) in the slag, the process of reducing it passes into the diffusion region, that is, restoring the excess content of ferric …

Purification Of Polluted Water At The Mubarek Gas Processing Plant Ltd Using By Ion Exchangers, Z. Sh. Nazirov

Technical science and innovation

The full chemical composition of the circulating and make-up water of the Mubarek Gas Processing Plant JSC “Uzbekneftigaz” has been investigated. Raw water sources are the Kui-Mazorsk reservoir and groundwater (artesian water).The amount of released impurities after their softening by passing through the layers of the KU-2-8 cation exchanger is determined. This method is simple, effective and energy-saving in water treatment, LLC "Mubarek" GPP.

Research Of Optoelectronic Voltage Relay, E.Kh. Abduraimov, A.N. Rasulov, D.Kh. Khalmanov, N.E. Hamidova

Technical science and innovation

Article represents using theoretical analysis and experimental studies of nonlinear resistive circuits and it was developed that it is important to use such circuits as power contactless switching devices to ensure a quality power supply for consumers. The paper deals with the problems of designing lightweight, reliable, high-speed contactless optoelectronic voltage relays with extended service life, combining a responsive device and a strong executive body with a sinusoidal form of the load voltage curve. Theoretical studies of transients in nonlinear dynamic circuits result in the solution of differential condition equations by a computational method built on the basis of optoelectronic …

The Necessity Of Utilizing Internal Blading At Steep-Falling Deposits, R.Sh. Naimova, S.J. Djuraev, K.Y. Norova, В. N. Sytenkov

Technical science and innovation

The article discusses the necessity to form internal blades in deep steep falling deposits. The experience of formation and the scheme of blading of internal blades in open-cast mines with different mining and geological conditions is summarized. The prospective solution of formation of internal blades for deep quarry Muruntau is given and their prerequisites are defined

Improving Methods Of Energy- Efficient Operation Of Drilling Equipment Using Vortex Tubes When Drilling Wells With Air Purging, R.U. Djuraev, J.B. Toshov, D.N. Khatamova

Technical science and innovation

The practice of drilling has proven that the use of compressed air as a cleaning agent provides a significant increase in ROP (mechanical drilling speed) and reduces the time spent on eliminating geological complications, which sharply increases the productivity and economy of drilling operations.

However, air has a low heat capacity compared to liquid flushing solutions, this affects the operation of rock cutting tools through high contact temperatures with irreversible consequences such as deformation of matrices, destruction of diamonds, grinding, reduction of diamond hardness and tool burns. To prevent these problems, there is a need to develop technical means and …

Laboratory Study Of Parameters Of Contour Blasting In The Formation Of Slopes Of The Sides Of The Career, Sh.Sh. Zairov, Sh.R. Urinov, A.B. Tukhtashev, Y.A. Borovkov

Technical science and innovation

Explored theoretically the interaction of explosive charges in the preliminary gap formation in quarries. A methodology has been developed for conducting experimental studies of blast well contour explosions on models, which allows one to investigate crack formation on volumetric models and wave interaction using high-speed video recording of the explosion process in transparent models, as well as determine the parameters of explosion stress waves in samples of real rocks. Theoretical and laboratory researches have established that only the creation of a screening gap for the entire height of the non-working ledge allows you to get a virtually undisturbed array with …

Development Of The Optimal Design Of A Cyclone Apparatus With A Fluidized Bed For The Process Of Metals Pneumatic Separation In The Composition Of Industrial Waste, N. R. Yusupbekov, B. I. Yunusov, Sh. M. Gulyamov, I. I. Yunusov, F. A. Kasimov

Technical science and innovation

Recycling of techno genic waste accumulated in recent years in Uzbekistan is currently a pressing problem. In this regard, this paper examines the issue of studying the process of enrichment of man-made waste in a cyclone with a fluidized bed. To conduct the experiment on experimental advanced devices with extended zones five types of samples of techno genic waste with the limits of 0.072÷0.078mm, 0.064÷0.070mm, 0.057÷0.063mm, 0.046÷0.055mm and 0.041÷0.044mm have been prepared. Nomograms have been obtained using mathematical models to determine particle size limits, which ensure good separation. Experiments have been carried out on the separation of techno genic waste …

Askug System - Integration Of "Green Technologies" In The Process Of Effective Management Of Natural Resources, М.N. Musaev

Technical science and innovation

The article presents the results of a study to reduce greenhouse gases through the introduction of green technologies. Different countries are making rather tough decisions to reduce greenhouse gas emissions. The basics of environmental protection and conservation of natural resources are considered, the problems of green technology are analyzed. Uzbekistan has not yet taken tough measures to reduce greenhouse gases. But there are positive trends due to the introduction of green technology to reduce emissions. Also, green technology is being introduced into the gas transportation system, which will lead to the saving of natural resources. The ASKUG system for gas …

Modification Of Composition Of Salinity Inhibitors Based On Organophosphonates And Acrylic Acid, B. Kadirov

Technical science and innovation

Chemical and mineralogical compositions of mineral deposits and acidic precipitations have been studied, and synergistically effective compositions of inhibitors of salt deposits have been selected based on -PO₃H₂ and COOH containing organic compounds. The article proposes a formulation of a mineral salts deposit inhibitor corresponding to regulatory indicators (not less than 90%) for the protection of municipal boiler houses and industrial equipment, comparative results of the industrial preparation Komperex-710. The obtained compositions were found to be effective inhibitors in concentrations of 8-12 mg/l in waters with calcium and magnesium chlorides Chimbaia, Turtkulia and Biruni with hardness of …

Prospects Of The Development Of Unmanned Aerial Vehicles (Uavs), Rakhimjon Shokirov, Nuriddin Abdujabarov, Takhirov Jonibek, Kadamboy Saytov, Saidbek Bobomurodov

Technical science and innovation

This article outlines the current state of research and development for autonomous unmanned aircraft for civil use. Specifically, the history of UAVs for civil use, research and development in the world, and the topics and prospects for the control and operation of autonomous UAVs for civil use are defined. The perspectives for the use of unmanned aerial vehicles (UAVs) are addressed, programs due to the formation and problems preventing the use of UAVs are listed, and ways of increasing competitiveness are taken into account. This article provides an overview of research involving the advancement of UAV technology for the management …

Evaluation Of The Effectiveness Of Channel Level Protocoll Parameters, Sh. S. Karimov, Y. Cho

Technical science and innovation

There is justification for a simulation model for assessing channel level protocols. The effect of the data link layer protocol parameters on the data transfer function is analyzed. The data link protocol parameters have been specified and split into two categories, which are customizable and not configurable. In the work, parameters such as the acceptable information frame size are related in detail to the tunable data link protocol parameter; service personnel format; time-out value; unconfirmed frame window size, etc. That nominal data transfer rate, error-correcting codes used, etc. are non-configurable parameters.

The Use Of High-Precision Magnetometry In Solving Various Scientific And Production Problems, K.N. Abdullabekov, T.P. Jiyanov

Technical science and innovation

. In the article named "the use of high-precision magnetometry in solving various scientific and production problems" the data of analysis of long-term observations of the geomagnetic field are presented, and the specialists engaged in magnetometric work are familiarized with the methods of high-precision magnetic surveys developed at the Institute of Seismology and some results of magnetometric work obtained at geodynamic testing sites in Uzbekistan.

Test Of Experimental Ultrafiltration Installation, X.S. Isaxodjayev, L.O Alimova, B.B. Boliyev

Technical science and innovation

The paper presents the test results of an ultrafiltration unit. During the test, one of the main parameters of the ultrafiltration process, membrane permeability and a rational process parameter, a linear velocity in the range of 4-7 s/m . According to the results, it can be determined that the process is considered effective if the membrane permeability remains maximum for a long time at a given selectivity and with minimal energy consumption. It was found that for ultrafiltration separation of concentrated solutions of iron hydroxide, the optimal values of the linear velocity are in the range of 5.0-10.0 s/m at …