Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 2 of 2
Full-Text Articles in Engineering
Elimination Of Extraordinarily High Cracking Susceptibility Of Aluminum Alloy Fabricated By Laser Powder Bed Fusion, Holden Hyer, Le Zhou, Sharon Park, Thinh Huynh, Abhishek Mehta, Saket Thapliyal, Rajiv S. Mishra, Yongho Sohn
Elimination Of Extraordinarily High Cracking Susceptibility Of Aluminum Alloy Fabricated By Laser Powder Bed Fusion, Holden Hyer, Le Zhou, Sharon Park, Thinh Huynh, Abhishek Mehta, Saket Thapliyal, Rajiv S. Mishra, Yongho Sohn
Mechanical Engineering Faculty Research and Publications
Using the calculation of phase diagrams approach and Scheil solidification modeling, the Al-2.5Mg-1.0Ni-0.4Sc-0.1Zr alloy was designed, intentionally with an extraordinarily high cracking susceptibility, making it prime for solidification cracking during laser powder bed fusion. This study demonstrates the ability to mitigate even the most extreme solidification cracking tendencies in aluminum alloys with only minor alloying additions of Sc and Zr, 0.5 wt.% max. Furthermore, by employing a simple direct ageing heat treatment, good tensile mechanical properties were observed with a yield strength of 308 MPa, an ultimate tensile strength of 390 MPa, and a total elongation of 11%.
Microstructural Development In Inconel 718 Nickel-Based Superalloy Additively Manufactured By Laser Powder Bed Fusion, Thinh Huynh, Abhishek Mehta, Kevin Graydon, Jeongmin Woo, Sharon Park, Holden Hyer, Le Zhou, D. Devin Imholte, Nicolas E. Woolstenhulme, Daniel M. Wachs, Yongho Sohn
Microstructural Development In Inconel 718 Nickel-Based Superalloy Additively Manufactured By Laser Powder Bed Fusion, Thinh Huynh, Abhishek Mehta, Kevin Graydon, Jeongmin Woo, Sharon Park, Holden Hyer, Le Zhou, D. Devin Imholte, Nicolas E. Woolstenhulme, Daniel M. Wachs, Yongho Sohn
Mechanical Engineering Faculty Research and Publications
Excellent weldability and high temperature stability make Inconel 718 (IN718) one of the most popular alloys to be produced by additive manufacturing. In this study, we investigated the effects of laser powder bed fusion (LPBF) parameters on the microstructure and relative density of IN718. The samples were fabricated with independently varied laser power (125–350 W), laser scan speed (200–2200 mm/s), and laser scan rotation (0°–90°). Archimedes’ method, optical microscopy, and scanning electron microscopy were employed to assess the influence of LPBF parameters on the relative density and microstructure. Optimal processing windows were identified for a wide range of processing parameters, …