Open Access. Powered by Scholars. Published by Universities.®

Engineering Commons

Open Access. Powered by Scholars. Published by Universities.®

International Conference on Durability of Concrete Structures

Conference

2019

Sulphate

Articles 1 - 2 of 2

Full-Text Articles in Engineering

Influence Of Exposure Environments On The Durability Of Slag-Blended Cements, Joseph Onah Ukpata, P. A. M. Basheer, Leon Black Nov 2019

Influence Of Exposure Environments On The Durability Of Slag-Blended Cements, Joseph Onah Ukpata, P. A. M. Basheer, Leon Black

International Conference on Durability of Concrete Structures

Both chlorides and sulphates combine in seawater to affect the durability of reinforced concrete structures located in marine environments. This paper presents the results of an experimental study on slag blended cement systems, cured for 7 days, before exposure to a combined solution of sodium chloride (30 g/L) and sodium sulphate (3 g/L). Two slags of different chemical compositions, designated as slags 1 and 2 were respectively blended with Portland cement CEM I 52.5R at 30 and 70 wt.% replacement levels. Mechanical tests on mortar samples were complemented by microstructural examination and chemical characterisation on paste samples, all using a …


Effects Of Temperature And Curing Duration On The Stability Of Slag Cements In Combined Chloride-Sulphate Environments, Joseph Onah Ukpata, P. A. M. Basheer, Leon Black Nov 2019

Effects Of Temperature And Curing Duration On The Stability Of Slag Cements In Combined Chloride-Sulphate Environments, Joseph Onah Ukpata, P. A. M. Basheer, Leon Black

International Conference on Durability of Concrete Structures

This experimental study investigates the effects of temperature and curing duration on the stability of slag blended cement systems exposed at 20 °C and 38 °C to combined sodium chloride (30 g/L) – sodium sulphate (3 g/L) solutions. Two slags, designated as slag 1 and 2, having CaO/SiO2 ratios of 1.05 and 0.94, were respectively blended with Portland cement CEM I 52.5R at 30 wt.% replacement level. Mortar prisms and cubes with w/b ratio of 0.5 and binder/aggregate ratio of 1:3 were then prepared for length and mass changes. The samples were cured in lime water for either 7 …