Engineering Commons^™

Hybrid Wall Outlet For Ac Or Dc Power Delivery, Garrett Knoller, Kerr Allan, Greg Perini

Electrical Engineering

The goal of this project is to develop hybrid DC and AC wall outlets for an efficient, flexible power interface. A DC plug standard is also proposed to allow DC devices to be safely powered by the outlet with the correct DC voltage for each device. The primary objective is to create a power outlet compatible with the proposed DC plug as well as NEMA 5-15 AC plugs, enabling the same outlet to power both types of load as needed. The outlet is intended for buildings and systems transitioning to an isolated DC grid to encourage DC development and adoption. …

Solar Photovoltaic Iv Curve Tracer, Jonathan W. Skelly

Electrical Engineering

The Solar Photovoltaic Current-Voltage (IV) Curve Tracer, sponsored by Cal Poly Professor Dale Dolan, characterizes solar array current vs. voltage curves for any given temperature and irradiance. The curve tracer is battery powered, and functions autonomously across loading conditions from short circuit to open load on any sub-450-watt solar array. The curve tracer supports separate data logging modes for both single cells and single modules to maximize data accuracy for each. For testing full strings of solar panels, up to 10 IV curves may be stored in persistent EEPROM memory. Stored data may be recalled later for output to a …

Distribution Line Multi-Tool, Michael Andrew Garcia, Drew Miller, Sukhdeep Singh, Ritwik Kesavath

Electrical Engineering

Power companies are always interested in the best possible monitoring equipment for their grid. The power line multi-tool developed would aid in the monitoring of the power system’s distribution network. This device assesses the current conditions of distribution power lines. The device is able to measure current, detect downed power lines, as well as recognize fire starting conditions, and have wireless communication for ease of access and installation. Overall this device greatly aids in helping utilities monitor their grid in more detail.

With the increase of dry climates yearly, several utility companies are taking measures to aid in the prevention …

Lawn Buddy, Jayson Johnston, Andrew Brown, Jacob Maljian

Electrical Engineering

Grass lawns are a common hallmark of the American home. In 2019, a survey from the National Association of Landscape Professionals found that 81% of all Americans owned a lawn [1]. Mowing is a time consuming and costly chore that is part of maintaining a grass lawn. The manual labor in mowing a lawn can exceed 40 hours per year [2]. People commonly incur weekly costs on mowing services to save time. Traditional gas powered mowers are physically demanding and use engines that need routine maintenance. They operate loudly enough that users should be wearing hearing protection and the noise …

Dc To Dc Usb-C Charger, Nikki Gmerek, Kenneth Nguyen, Uriel Serna

Electrical Engineering

The DC House USB-C Charger will convert the 48V input from the DC house, found on the Cal Poly campus, to 3 USB-C outputs: 5V, 12V, and 24 volts. The converter will deliver a total of 185 Watts out across all 3 outputs, with an efficiency greater than 82% at full load. The USB-C ports will be used to connect to compatible phones, laptops or any other device for charging/powering purposes. The goal of this project is to develop the most efficient and safe converter to deliver power to multiple outputs using USB-C, for items as small as a cell …

Cal Poly Ee 518 Electric Power Protection Laboratory, Richard Terre, Vincent Tham, Austin Kurth

Electrical Engineering

Facing a rapidly-changing power industry, the electrical engineering department at Cal Poly San Luis Obispo proposed Advanced Power Systems Initiatives to better prepare its students for entering the power industry. These initiatives call for the creation of a new laboratory curriculum that utilizes microprocessor-based relays to reinforce the fundamental concepts of power system protection.

The electric power protection laboratory (EPPL) senior project is the validation of lab manuals written for the planned EE-518 power system protections laboratory looking to be offered in Spring 2020 alongside the current lecture class under the same designation. This report evaluates the lab manual, verifies …

Usb-C Power Adapter For Dc House Project, Tyler G. Starr, Ezzeddeen Gazali

Electrical Engineering

Despite the importance of electricity and the impact it has on our daily lives, many people around the world still live without this essential utility today. According to the International Energy Agency (IEA), approximately 1.1 billion people in the world did not have access to electricity in 2017. The DC House Project at Cal Poly aims to provide electricity to people living in rural areas by directly utilizing DC energy generated from renewable or human powered sources without the need for DC-AC conversions. However, one significant issue is the lack of a standardized DC wall socket. Standards for AC wall …

Grid-Tied Solar System, Virginia Yan

Electrical Engineering

Distribution level solar energy generation has gained importance and popularity, because it helps create a sustainable electricity system while reducing the harmful environmental impacts our current power systems have. This project proposes an alternative energy source, a laboratory-scale grid-connected photovoltaic system. A KC120-1 solar panel produces 120 Watts maximum. A grid-tied solar power inverter does DC-to-AC conversion and minimizes energy transfer losses. The inverter also has an anti-islanding feature, which senses a power outage and prevents back-feeding through isolating the circuit. The circuit breakers isolate electrical components and protect the circuit. Schweitzer Engineering Laboratories SEL-751 feeder protection relay and SEL-735 …

Microgrid Protection Student Laboratory: Human-Machine Interface And Scada Database, Nathan P. Martinez

Electrical Engineering

The electric utility system, a ubiquitous and fundamental component of modern life, has changed more in the last 20 years than the last 100. With more homes and businesses installing distributed energy resources (DERs) such as solar panels, battery storage, and other intermittent sources, massive changes need to take place in the electric transmission and distribution systems. Engineers must develop a new skill set for a modern utility industry. This project summarizes a component for a new laboratory class aimed at power engineering students at Cal Poly which supports the laboratory through the creation of a human-machine interface (HMI) and …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Lab-Scale Circuit Breaker Module For Power System Laboratories, Amanda Barley, Allen C. Scozzari, Joshua E. Chung

Electrical Engineering

In this project, a circuit breaker that can simulate different types of power system faults is redesigned, constructed, and tested. They will then be implemented in power systems laboratory courses at Cal Poly. The project’s goal is to improve a previous circuit breaker design to help students better visualize how faults affect power systems in the real world. Two main improvements are made to the previous circuit breaker design. The first improvement is to power the breaker with a typical wall outlet adapter instead of the DC source from the Cal Poly power systems laboratory test benches. This lets the …

Hybrid Water Pump, Dylan W. Grant, Wei Chen Yeh

Electrical Engineering

This project seeks to use multiple sources to power a water pump. We will design a system which will combine inputs from solar and wind energy production to ensure the pump will have enough power to run. This will create a system powered by clean energy and will be self-sustained once completed. This will theoretically create a more sustainable source of power for the pump than only one of the sources. Because the power sources don’t require outside inputs (aside from sun and wind), the pump can be placed in a remote area. This could be very helpful in developing …

Dc House Energy Management System, Zachary L. Eldredge, Zoe M. Hay

Electrical Engineering

In this work, a previously completed proof of concept for an Energy Management System (EMS) for the DC House project has been revised and re-implemented. The implemented design changes will improve the performance and reproducibility of the system. This new design of the EMS replaces the two-separate buck and boost DC-DC converters with a single bidirectional DC-DC converter to reduce components and improve efficiency. Analysis of the bidirectional DC-DC converter shows high efficiency especially at larger load currents. The code of the previous work was updated for smoother operation as well as to accommodate an LCD capable of displaying more …

Power Distribution:Protection Analysis, Avneet S. Samra

Electrical Engineering

The objective of this project is to build a radial distribution system that operates on a lower voltage. The system consists of a transmission line protected by a SEL-351 Relay, a three- phase transformer protected by a SEL-587 Relay, and a three-phase induction motor protected by a Cooper Form 6 Controller. The SEL-351, SEL-587, and the Cooper Form 6 Controller are microprocessor-based relays that are used to provide protection under faulted conditions. When a fault is detected in the system, the closest upstream relay sends a trip signal to its assigned local breaker. The SEL-351 provides overcurrent protection for the …

Designing A Power Distribution System For The Arce 257 Revit Structural Model, Reid Wilhelm

Electrical Engineering

The construction industry needs engineers. Mechanical, electrical, and plumbing engineers, better known as MEPs, comprise a large number of employees who design and assist in the building of commercial structures. In particular, electrical engineers design power distribution systems for these buildings, including the power, lighting, low voltage, and fire protection subsystems.

Here at Cal Poly, architectural engineers enrolled in ARCE 257 create authentic structural plans for a fictitious two-story structure. This senior project transforms these structural plans into an architectural model and creates a power distribution system for the entire building. This is done through a building information modeling (BIM) …

Integration Of Sel Relays To Provide Motor, Transmission Line, And Transformer Protection, Christopher Ewing, Bryce Keefer

Electrical Engineering

The objective of this project is to familiarize the performers with the principles of operation of the Schweitzer Engineering Laboratories (SEL) protective relays in both normal and fault conditions. The SEL-587, SEL-311L and SEL-710 microprocessor-based relays are used to provide protection for a system composed of transformers, simulated transmission lines and a 3-phase induction motor. Each of these relays provides protection by sending a trip signal to local breakers upon sensing a fault condition. The SEL-587 provides overcurrent and differential protection for a 3-phase transformer, while the SEL-311L provides differential and distance protection for a transmission line, and negative sequence. …

Rf Power Harvesting Rectenna, Jimmy Tang, Raymond Phu, Tom Geranios, Benjamin Muñoz

Electrical Engineering

Sustainability is one of today's primary engineering objectives. This principle involves system design that minimizes environmentally harmful energy emissions and resource consumption, and maximizes renewable energy practices [1]. Communication antennas transmit wireless signals that can be converted into usable energy. The Rectenna system described in this report, shown in Figure 1, was designed to accomplish this energy conversion, with -5dBm (316µW) minimum power at the rectifier input. Since typical ambient signal power is in the -70dBm (0.1nW) range, the proposed system could only convert passive, relatively high-power microwave band AC signals to DC. The Rectenna system was designed for 1.9GHz …

Solar-Powered Hot Tub, Jonathan Peterson, Anthony Zepeda

Electrical Engineering

This paper discusses the design and implementation of a solar-powered hot tub. The concept of this project was to design an independently-operated hot tub powered by a 12V rechargeable battery, charged during the day by a single 400W solar panel. For this purpose, a twenty-year-old name-brand hot tub was purchased, in used condition. The plumbing, AC electrical wiring, and mechanical pumps were all removed and replaced with new components to meet our design specifications. Additionally, a solar water-heater was designed and integrated into the system to directly apply the sun’s heat to water pumped in and out of the tub, …

Power Protection Analysis For A Ten Bus System, Sean Hanna

Electrical Engineering

Each power system built in the industry requires a protection plan. Undetected faults in a power system can contribute to hazardous conditions, overheating of power devices, low or high system voltages, unbalanced conditions, and blackouts. This senior project is the design of a protection plan for a power system using the software Electric Transient Analyzer Program (ETAP). With ten buses, five transformers, two generators, two motors, and six transmission lines, there are many possibilities for a fault to occur. The Load flow and fault analysis are studied before the system is protected. All components of the system are protected using …

Enterprise Smart Outlet, David Faltmier, Matthew Mcgill, Luke Stencel

Electrical Engineering

The purpose of our senior project, Enterprise Smart Outlet, is to create an electrical outlet which will allow enterprise users to monitor and change their power consumption habits on a large scale. The initial goal of this project is to allow consumers to see their power consumption per outlet in real time, and then using that information conform their future habits to help them conserve electrical energy, and more importantly, money. Three requirements for our project to meet our initial goal are, the outlet will work in a standard electrical outlet and be completely compatible with current electrical standards, the …

Merry-Go-Round Human Powered Generator, Sarah Lorraine Ashe, Salvador Navarro

Electrical Engineering

How do you bring electricity to families who have limited resources in a developing country? The DC House project, advised by Dr. Taufik, provides a way for kids to have fun, exercise and generate power for their homes – play-park human powered generators. This project intends to create a more efficient and cost effective way for playground equipment to be implemented for power generation. The redesigned and reconstructed merry-go-round human powered generator converts mechanical energy into electrical energy to power the DC house. This was a fully functioning generator that needed a better voltage gain, as well as, a more …

Piezoelectric Powered Led Street Reflector, Collin Shane Douglass

Electrical Engineering

In many areas of Washington, it rains for a majority of the year. During rainy weather it becomes difficult to see street lanes and dividers, causing hazardous road conditions. The Piezoelectric Powered LED Street Reflector solves this problem. The PPL Street Reflector modifies a street reflector with LED lights. These lights help drivers clearly see where dividers and street lines are in non-ideal weather conditions, such as rain, fog, and snow. The PPL Street Reflector capabilities include harvesting energy through the Piezoelectric Effect, creating a self-sustaining device with minimal maintenance.

Off Grid Solar Powered Street Light, Justin Fang, Billy Pham

Electrical Engineering

Street lights are fixtures found in every city and serve the important purpose of illuminating the streets and keeping the roads safe for pedestrians and drivers. Current street lights are powered by the grid, power which is paid for by the taxpayers and could have been used to power homes instead. With this project, our goal is to design and implement an electric power system that collects and stores solar energy, and delivers power to an LED smart street light. The resulting system would reduce street light energy costs by 100% since they would not draw any power from the …

Cal Poly Wind Power Research Center Power Regulator, Ricardo Rodriguez, Steven Bounchareune

Electrical Engineering

Through funding from the California Central Coast Research Partnership (C3RP) the

CPWRC, led by Dr. Patrick Lemieux, has erected a horizontal axis wind turbine (HAWT) at the

Cal Poly Escuela Ranch site EL04. With the help of Dr. John Ridgely and Dr. Art MacCarley, the team has implemented a controller that delivers the power being generated by the turbine to a resistor bank which maintains a safe working speed for the turbine. The authors objectives for this project are to (1) become familiar with the operation of the turbine, (2) develop an AC-DC converter that regulates the output of the …

Application Of Wireless Power For Charging The Battery Of A Wireless Mouse, Jacob Keast, Vincent Jison

Electrical Engineering

Electronic devices are a part of all modern homes, but restricted by available outlets and the hassle of wires. With the modern wireless mouse, this is also the case. When the battery is low the consumer has several options: it is replaced with a new battery, it can be recharged using a USB wire, or the mouse is placed on a charging dock. This project provides an alternative to these options and allows the mouse’s battery to be charged via wireless inductive coupling. The wireless power charging system that was implemented in this project was successful in its ability to …

Portable Solar Powered Charging Station, Jordan Bonner

Electrical Engineering

The portable solar powered charging station uses a solar powered mat that can be folded for portability. The device has the ability to charge small electronics during both day and night. When sunlight is available, the charger charges two C batteries in series and at the same time it charges any electronic device that can be connected via USB or cigarette lighter. At night the charger will charge the same electronic devices from the onboard batteries. The charging station must be able to interface with electronic devices using USB and a car cigarette lighter to charge the device’s battery.

140 New Montgomery Power Distribution Design, Stephen Shaffer

Electrical Engineering

The Power Distribution Design for a high-rise building requires a great deal of coordination and design from the structural, electrical, mechanical, telecommunication, and PG&E engineers. This report will cover how I was able to coordinate and design the power distribution system for 140 New Montgomery, a 28 story building located in San Francisco. Furthermore, this report will cover the steps taken in the future to ensure a smooth transition from the schematic design phase to the construction document phase.

Android Application Controlled Surge Protector, Lok An

Electrical Engineering

A significant amount of consumer electronics cannot be switched off completely without being unplugged. Standby power, also known as phantom power, refers to the electric power consumed by electronic appliances when they are switched off. There are some devices that need constant power; items like alarm clocks and security systems need constant power to function correctly. Some devices, such as video game consoles and televisions, consume power without offering any features. Electricity lost from standby power has been increasing with the amount of consumer electronics increasing in households.

This project’s goal is to create a low power remote that can …

Off-Grid Photovoltaic System Design Project, Brian Duffy

Electrical Engineering

This project uses the BP SX 150S solar panel to charge a 12 V battery. This battery powers an AIMS 400 W Modified Sine Wave Inverter to provide 120 V RMS AC power to a load of up to 40 W. Inverter efficiency was measured at different load conditions. A control circuit was implemented to prevent overcharging or over-discharging of the battery, by disconnecting it from the panel or the load, respectively. The control circuit turn-on and cutoff voltages were measured versus battery voltage, and the on-resistance of the MOSFET switches was measured for various load currents. A table of …

Hydro-Electric Generation System For The Dc House Project, Dennis Kwan, Mitchell Krug

Electrical Engineering

This paper focuses on the design, integration, and construction of a system that harnesses energy from flowing water. The system will be used in conjunction with the DC House Project. The proposed system employs a DC generator and DC-DC Boost-converter to provide electricity to the DC House at approximately 200-300W. Results of the testing and measurement show that the goal of the system is feasible, but currently limited. The generator could not output the specified power. Details of the design, along with ideas for further improvement, are presented in this report.