Engineering Commons^™

Mix Design For A Concrete Canoe, Ryan Thomas Christensen

Undergraduate Honors Capstone Projects

Each year the American Society of Civil Engineers sponsors a concrete canoe competition. This paper details the work performed by Ryan Christensen for the 2006 concrete canoe competition. His primary focus was on formulating a concrete mix to be used for the Utah State University canoe. Basic information regarding the building and design of concrete canoes is also presented. Finally, general competition results for 2006 are presented for the Utah State University canoe team.

Classified Vector Spiht For Wavelet Image Coding, Y. Liang, Scott E. Budge

Electrical and Computer Engineering Faculty Publications

Wavelet based image coding has been shown to be an effective method, especially at low bit rate. Two successful approaches, space-frequency quantization (SFQ) and set partitioning in hierarchical trees (SPIHT) were proposed to predict insignificant wavelet coefficients. However, both of them employ a simple scalar quantization scheme instead of powerful vector quantization for coding of the significant wavelet coefficients. In this paper we propose a new image coding method that combines the SPIHT type set partitioning technique with classified vector quantization. That is, the set partitioning technique is used to locate significant wavelet coefficient vectors based on vectors' energies. In …

A New Method For Determination Of Most Likely Landslide Initiation Points And The Evaluation Of Digital Terrain Model Scale In Terrain Stability Mapping, P. Tarolli, David G. Tarboton

Civil and Environmental Engineering Faculty Publications

This paper introduces a new approach for determining the most likely initiation points for landslides from potential instability mapped using a terrain stability model. This approach identifies the location with critical stability index from a terrain stability model on each downslope path from ridge to valley. Any measure of terrain stability may be used with this approach, which here is illustrated using results from SINMAP, and from simply taking slope as an index of potential instability. The relative density of most likely landslide initiation points within and outside mapped landslide scars provides a way to evaluate the effectiveness of a …

A Lifting-Line Approach To Estimating Propeller/Wing Interactions, Doug F. Hunsaker, Deryl O. Snyder

Mechanical and Aerospace Engineering Faculty Publications

A combined wing and propeller model is presented as a low-cost approach to first-cut modeling of slipstream effects on a finite wing. The wing aerodynamic model employs a numerical lifting-line method utilizing the 3D vortex lifting law along with known 2D airfoil data to predict the lift distribution across a wing for a prescribed upstream flowfield. The propeller/slipstream model uses a blade element theory combined with momentum conservation equations. This model is expected to be of significant importance in the design of tail-sitter vertical take-off and landing (VTOL) aircraft, where the propeller slipstream is the primary source of air flow …

Year Two Annual Report: Activities, Findings And Evaluators' Reports, Naida Tushnet, Jodie L.S. Hoffman, Jaclyn Ziobrowski, Khadijah Salaam, Isabel Ochoa

Reports to NSF

A major challenge in the work of the National Center for Engineering and Technology Education has been the need to strengthen the research climate across the institutional settings. A number of activities have been directed at that effort: internal funding of small student and faculty research projects; presentations by researchers at Center meetings; providing a research focus for the required core courses in cognitive science, design, problem solving, and creativity; and the evolution of the research framework for the Center. The internal research program has been successful in providing relatively non-threatening experiences with proposal preparation, review, negotiation, and the conduct …

Simulation And Modeling Of Return Waveforms From A Ladar Beam Footprint In Usu Ladarsim, Scott E. Budge, B.C. Leishman, R.T. Pack

Electrical and Computer Engineering Faculty Publications

Ladar systems are an emerging technology with applications in many fields. Consequently, simulations for these systems have become a valuable tool in the improvement of existing systems and the development of new ones. This paper discusses the theory and issues involved in reliably modeling the return waveform of a ladar beam footprint in the Utah State University LadarSIM simulation software. Emphasis is placed on modeling system-level effects that allow an investigation of engineering tradeoffs in preliminary designs, and validation of behaviors in fabricated designs. Efforts have been made to decrease the necessary computation time while still maintaining a usable model. …

A Sedimentation Study Of The Green River Irrigation Canal, Green River, Utah, Jan Michael Miller

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

This sedimentation study of the Green River irrigation canal provides the Green River Canal Company (GRCC) with a detailed aerial map of the Green River irrigation canal system to allow operators to quickly and accurately locate canal structures. Also, an Excel spreadsheet accounting model was created which provides the GRCC with the ability to determine where sedimentation likely occurs throughout the canal under given conditions. This model must be operated within set guidelines to provide reliable results and should be calibrated for increased accuracy. It was determined that with no irrigation (i.e., with no canal structures open except for the …

A Comparison Of Four-Step Model And Path Flow Estimator For Forecasting Network Flow: A Case Study Of Cache County In Utah, Siddareddy B. Pedaballi

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Development of alternative methodologies for travel demand modeling has become important in recent years due to the lack of resources for small and medium communities to adopt conventional four step travel models. Many researchers have proposed alternative tools of travel demand modeling for these communities. But majority of them still require large amount of data and technical sophistication.

In this study, the Path Flow Estimator (PFE) is used to estimate the network traffic of Cache County. PFE estimations are based on the collected traffic counts, vehicle production and attractions of zones estimated using Institute of Transportation Engineers (ITE) trip generation …

History Of The Logan Bluff Landslide Zone, Seth P. Olsen

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

On September 10, 2005, a landslide occurred to the south of Utah State University Campus and Highway 89. This landslide did considerable damage to the Logan and Northern canal, which is cut into the slope, and to a residence at the toe of the slope. This event brought many parties together to collaborate on possible solutions to the immediate fix of the slide as well slides that could occur in the future. The purpose of this report is to compile information useful to the study of the area and the possible solutions and/or risk assessment of the Logan Bluff Landslide …

Utilization Of Ultrasonic Consolidation In Fabricating Satellite Decking, Joshua L. George

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A fundamental investigation of the use of ultrasonic consolidation (UC) to produce deck panels for small satellites was undertaken. Several fabrication methods for producing structural panels and decking were analyzed. Because of its ability to create aluminum objects in an additive fashion, and at near-room temperatures, UC was found to be a powerful solution for creating highly integrated and modular satellite panels. It also allowed a lightweight and stiff deck to be fabricated without the use of adhesives.

A series of experiments were performed to understand the issues associated with creating a sandwich-type structure using UC. The experiments used a …

Nectar Clean 2006 A Complete Disk Utility Program, Matthew Areno

Undergraduate Honors Capstone Projects

The objective of this paper is to introduce a hard drive enclosure kit and program, named Disk Utility, which provides various utilities to a work-bench tech or a home user. Both the authors have worked in a tech-bench area and have found that this is a useful tool to have, as many times trouble-shooting type tasks are necessary to properly diagnose problems on a hard drive. It has also been found to be far easier to implement these changes on a hard drive that doesn't need to be moved from machine to machine.

Many design approaches are covered in this …

Driveline For The Usu 2006 Mini Baja, Daniel Chase Swenson

Undergraduate Honors Capstone Projects

The Mini Baja project is part of an intercollegiate engineering design competition sponsored by SAE. For this competition senior engineering students at USU design and build a small off-road racecar. The design of the car is broken up into several different subassemblies. The driveline subassembly is responsible for transmitting the power from the transmission to the rear wheels. This is accomplished using several different components that have all been analyzed and designed. The completed driveline is able to accommodate sixteen inches of suspension travel, is lightweight, and was inexpensive to build. The driveline along with the rest of the car …

Steady State Simulations Of A Mars Entry Vehicle, Daniel Guy Schauerhamer

Undergraduate Honors Capstone Projects

Using computational fluid dynamics, steady state simulations of a capsule like Mars entry vehicle at certain trajectory points was performed. Trajectory points were chosen incrementally from 90 to 11.5 kilometers altitude. The Direct Simulation Monte Carlo method and the Overflow 2 Navier-Stokes solver were used depending on Knudsen number values greater than or less than 0.1, respectively. To compare flow effects of the maximum angle of attack error margin of three degrees, axially symmetric cases were computed and compared to three dimensional cases demonstrating an attack angle (α) of three degrees. Lift and drag coefficients are reported and compared. The …

Design Of 'Iris', A Small Autonomous Surveillance Uav, Jennifer Boyce, Ryan Carr, Donovan Chipman, Greg Larson, Nathan Hopkins, Doug F. Hunsaker, W. Jerry Bowman

Mechanical and Aerospace Engineering Faculty Publications

This paper documents the design process used for a small autonomous surveillance UAV. The most significant requirements for the plane were size (man-packable), endurance (about 1 hour) and cost (essentially disposable). The plane that resulted, named "Iris", is a tailless plane with a 45 cm wing span and a total mass of less than 200g. During flight tests, it achieved an endurance of 52 minutes. The estimated cost to manufacture the planes was $343, excluding the autopilot.

Engineering Student Outcomes For Grades 9-12, Vincent Childress, Craig Rhodes

Reports of Center Studies

The following research study was conducted during the 2005 – 2006 academic year. Its purpose is to help the National Center for Engineering and Technology Education determine those engineering outcomes that should be studied in high school when the high school student intends to pursue engineering in college. The results of the study will also be used to determine those engineering student outcomes that all technology education high school students should learn in order to aid them in becoming more technologically literate.

A modified Delphi approach as used for the study. The participants were a panel of experts consisting of …

A Social-Cognitive Framework For Designing Pedagogical Agents As Learning Companions, Yanghee Kim, Amy L. Baylor

Yanghee Kim

Teaching and learning are highly social activities. Seminal psychologists such as Vygotsky, Piaget, and Bandura have theorized that social interaction is a key mechanism in the process of learning and development. In particular, the benefits of peer interaction for learning and motivation in classrooms have been broadly demonstrated through empirical studies. Hence, it would be valuable if computer-based environments could support a mechanism for a peer-interaction. Though no claim of peer equivalence is made, pedagogical agents as learning companions (PALs) -- animated digital characters functioning to simulate human-peer-like interaction -- might provide an opportunity to simulate such social interaction in …

Content-Based English Learning Through Pedagogical Agents, Yanghee Kim, P. Punahm, Y. Ko

Yanghee Kim

This paper suggests how an advanced technology called pedagogical agents can be applied to English education to benefit learners across ages through computer-assisted language learning (CALL) and content-based language learning (CBLL). CALL, when designed appropriately, has positively influenced the development of a learner’s linguistic proficiency and communicative competence (Chun, 1994; Fotos & Browne, 2004). CBLL integrates language learning with subject-matter learning to make language learning more meaningful (Snow, 2001; Swain, 1998). However, the conventional CALL programs are often criticized for the lacking a social context, considered essential for successful language learning ( Warschauer, 2004). Also, CBLL seems rarely applied to …

Cee3030 - Uncertainty In Engineering Analysis, Spring 2006, Gilberto E. Urroz

Civil and Environmental Engineering - OCW

This course on uncertainty in engineering analysis can also be referred to as probability and statistics for engineers. In particular, we will deal with the applications of probability and statistics to problems related to civil and environmental engineering. Note: Technical Requirements, Maple 10 by Maplesoft

Cee3500 - Fluid Mechanics, Spring 2006, Gilberto E. Urroz

Civil and Environmental Engineering - OCW

Explores fluid properties, hydrostatics, fluid dynamics, similitude, energy and momentum principles, closed conduit flow, open channel flow, and flow measurement. Includes laboratory exercises in flow measurement, open channel flow, pipe friction, physical modeling, and data collection.

Cee6510 - Numerical Methods In Civil Engineering, Spring 2006, Gilberto E. Urroz

Civil and Environmental Engineering - OCW

Engineering applications of approximation and interpolation, solution methods for ordinary differential equations, numerical solution of partial differential equations, nonparametric and parametric probability and regression estimation, and Monte Carlo and uncertainty analysis.

Technical Requirements: Maple 10 by Maplesoft,

Matlab

Logic Circuits And The Quality Of Life, Vincent W. Childress

Publications

The article presents information on the relationship between the logic circuits and the quality of life. The applications of logic circuits are countless. With the flooding of New Orleans in the wake of Hurricane Katrina, people around the world became all too aware of human dependency on technology to manage the forces of nature and maintain a high quality of life. New Orleans' sewage and water control systems depend on water pumps to move sewage, storm-water runoff, and fresh water around the city. Under normal conditions, when it rains in New Orleans, a city that sits below sea level, massive …

Creativity: A Framework For The Design/Problem Solving Discourse In Technology Education, Theodore Lewis

Publications

Subjects for which aesthetics and creative performance are critical curricular dimensions (such as art, physical education, music, and technology education), and which are accommodative of students across the range of intelligences (Gardner, 1999) are not readily or completely captured by content standards. Therefore content knowledge in these fields that target student achievement as conventionally conceived must be complemented by treatment of more subjective and elusive goals such as the development of connoisseurship, appreciation, or creative insight. With the publication of standards for the subject (International Technology Education Association, 2000), the need for focus upon creativity in technology education has been …

Review Of The Book - Teaching About Technology: An Introduction To The Philosophy Of Technology For Non-Philosophers, Vincent Childress

Publications

Marc de Vries' latest book, Teaching about Technology: An Introduction to the Philosophy of Technology for Non-Philosophers, was interesting to the reviewer because it provided a link between philosophies of technology and the nature of the technology curriculum more than any other philosophy-related work he has read. The book is intended for use with pre-service teachers, graduate students, and others who are interested in teaching technology. Teaching about Technology is part of a series of books on science and technology that is edited by William Cobern of Western Michigan University in Kalamazoo, Michigan. The editorial board for the series is …

Integrating The Study Of Technology Into The Curriculum: A Consulting Teacher Model, Thomas Erekson, Steven Shumway

Publications

Over the past 40 years there have been several initiatives by leaders in the profession to make revolutionary changes in philosophy, curriculum, methods, and facilities in the transition from industrial arts to technology education. The transition to technology education has been grounded in the dramatic changes that technology and technological innovations have brought to all aspects of society. It has been postulated that to fully participate in a technologically-based society, people must be technologically literate (Pearson & Young, 2002). Thus, the need arose to assure that all students have experience in technology education in order to acquire technological literacy.

New Perspectives: Technology Teacher Education And Engineering Design, Roger B. Hill

Publications

Initiatives to integrate engineering design within the field of technology education are increasingly evident (Lewis, 2005; Wicklein, 2006). Alliances between technology education and engineering were prominent in the development of the Standards for Technological Literacy (International Technology Education Association, 2000), and leaders from both disciplines have expressed support for the outcomes described in the Standards (Bybee, 2000; Council of the National Academy of Engineering, 2000; Dugger, Meade, Delany, and Nichols, 2003; Gorham, Newberry, and Bickart, 2003). The National Science Foundation (NSF) has also encouraged and funded opportunities for technology educators and engineers to work collaboratively. The Bridges for Engineering Education …

Five Good Reasons For Engineering As The Focus For Technology Education, Robert C. Wicklein

Publications

The article presents information on a paper which discusses why engineering design should be the focus for technology education. Technology education is still viewed as a non-essential instructional program and this is because school administrators and counselors have inadequate understanding of it. Even general populace have inadequate understanding concerning technology education. The pervasiveness of technology literally affects every living creature in our society. Therefore, it is of critical importance that the educational system includes and supports the study of technology in the general curricula. The deficiency within the technology education profession to formulate a clear and defined target for the …

Impacts Of The 2004 Tsunami On Groundwater In Sri Lanka, T. Illangasekare, S. W. Tyler, T. P. Clement, K. G. Villholth, A. P.G.R.L. Perera, J. Obeysekera, A. Gunatilaka, C. R. Panabokke, D. W. Hyndman, K. J. Cunningham, W-G. Yeh, Jagath J. Kaluarachchi, M-Rien Van Genuchten, K. Jensen

Civil and Environmental Engineering Faculty Publications

The 26 December 2004 tsunami caused widespread destruction and contamination of coastal aquifers across southern Asia. Seawater filled domestic open dug wells and also entered the aquifers via direct infiltration during the first flooding waves and later as ponded seawater infiltrated through the permeable sands that are typical of coastal aquifers. In Sri Lanka alone, it is estimated that over 40,000 drinking water wells were either destroyed or contaminated. From February through September 2005, a team of United States, Sri Lankan, and Danish water resource scientists and engineers surveyed the coastal groundwater resources of Sri Lanka to develop an understanding …

Treating Soil Pentachlorophenol (Pcp) At Optimal Conditions Using Heme And Peroxide, Shyi Tien Chen, David King Stevens, Guyoung Kang, M. J. Hsieh

Civil and Environmental Engineering Faculty Publications

The environmental impact of pentachlorophenol (PCP) has been the subject of extensive research in recent years. Investigations of PCP degradation using both biotic and abiotic methods are extensively reported in literature. Based on some preliminary tests (not shown), an abiotic method was found for oxidative PCP degradation in soil under unsaturated conditions and a neutral pH. Reagents used were heme (a catalyst) and peroxide (an oxidant). From two screening tests (not shown), the heme and peroxide were identified as the most important factors on PCP degradation in highly PCP-contaminated soil. The objective of this study was to determine the optimum …