Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Civil and Environmental Engineering (54)
- Bioresource and Agricultural Engineering (32)
- Mining Engineering (23)
- Physical Sciences and Mathematics (23)
- Environmental Engineering (21)
-
- Transportation Engineering (21)
- Life Sciences (15)
- Geological Engineering (14)
- Environmental Sciences (13)
- Chemical Engineering (11)
- Electrical and Computer Engineering (10)
- Materials Science and Engineering (10)
- Food Science (8)
- Mechanical Engineering (8)
- Oil, Gas, and Energy (7)
- Medicine and Health Sciences (6)
- Biomedical Engineering and Bioengineering (5)
- Chemistry (5)
- Computer Engineering (5)
- Energy Systems (5)
- Environmental Monitoring (5)
- Sustainability (5)
- Digital Communications and Networking (4)
- Earth Sciences (4)
- Environmental Chemistry (4)
- Environmental Indicators and Impact Assessment (4)
- Food Processing (4)
- Power and Energy (4)
- Structural Materials (4)
- Keyword
-
- Engineering (6)
- Kentucky transportation (5)
- Leaching (3)
- Safety (3)
- Aerosol (2)
-
- Bacteria (2)
- Coal (2)
- Combustion; conversion; mineral matter; quantitative analysis; X-ray diffraction; X-ray fluorescence (2)
- Decarbonylation (2)
- Decarboxylation (2)
- Deoxygenation (2)
- Hydrocarbons (2)
- Methane gas (2)
- Nickel (2)
- Ozone (2)
- PFAS (2)
- Post-harvest technology (2)
- Proso millet (2)
- Pyrolysis (2)
- Sustainability (2)
- Time series analysis (2)
- Trace elements (2)
- Underground coal mining industry (2)
- Univariate and multivariate forecasting. (2)
- Water (2)
- Wind energy (2)
- 100% Renewable grid (1)
- 3D F.E models (1)
- 3D FEA (1)
- 3D numerical modeling (1)
- Publication Year
- Publication
-
- Theses and Dissertations--Mining Engineering (18)
- Kentucky Transportation Center Research Report (15)
- Coal Combustion and Gasification Products Journal Archive (14)
- Biosystems and Agricultural Engineering Faculty Publications (10)
- Theses and Dissertations--Biosystems and Agricultural Engineering (9)
-
- Kentucky's Annual Forum on Transportation (6)
- Theses and Dissertations--Civil Engineering (5)
- Center for Applied Energy Research Faculty and Staff Publications (4)
- Theses and Dissertations--Computer Science (4)
- World of Coal Ash Proceedings (4)
- Chemistry Faculty Publications (3)
- Biomedical Engineering Faculty Publications (2)
- Chemical and Materials Engineering Faculty Publications (2)
- Civil Engineering Faculty Publications (2)
- Kentucky Transportation Center Presentations (2)
- Power and Energy Institute of Kentucky Faculty Publications (2)
- Progress in Scale Modeling, an International Journal (2)
- Theses and Dissertations--Electrical and Computer Engineering (2)
- Computer Science Faculty Publications (1)
- Electrical and Computer Engineering Faculty Publications (1)
- Electrical and Computer Engineering Presentations (1)
- Information Science Faculty Publications (1)
- Institute for Sustainable Manufacturing Faculty Publications (1)
- Institute of Research for Technology Development Faculty Publications (1)
- Kentucky Water Resources Annual Symposium (1)
- Mechanical Engineering Graduate Research (1)
- Mining Engineering Faculty Publications (1)
- Plant and Soil Sciences Faculty Publications (1)
- Theses and Dissertations--Biomedical Engineering (1)
- Theses and Dissertations--Chemical and Materials Engineering (1)
- Publication Type
Articles 1 - 30 of 122
Full-Text Articles in Engineering
Engineered Turf And Solar Renewable Performance On Ccr In Extreme Weather, Tate Niekamp, Bryan Scholl, Ming Zhu, Thomas Orzech
Engineered Turf And Solar Renewable Performance On Ccr In Extreme Weather, Tate Niekamp, Bryan Scholl, Ming Zhu, Thomas Orzech
World of Coal Ash Proceedings
The engineered turf final closure system, ClosureTurf®, is installed on a 309-acre coal combustion residual (CCR) unit at the TVA Shawnee Fossil Plant in West Paducah, KY. Approximately 100 megawatts of the PowerCap® solar photovoltaic (PV) system is currently being deployed directly atop the engineered turf cover. An overview of the ClosureTurf® and PowerCap® systems are presented along with a comparison to traditional soil covers and conventional utility-scale solar arrays. From August 2023 through July 2025, onsite and local weather data stations reported over 20 storm events including severe thunderstorms, tornado outbreaks, winter storm systems, atmospheric rivers, and post-tropical cyclones. …
Rare Earth Element Distribution And Mineral Host In Coal Derived Ash From South African Power Stations, Sanki Biswas, Nicola Wagner, Oftense Moroeng
Rare Earth Element Distribution And Mineral Host In Coal Derived Ash From South African Power Stations, Sanki Biswas, Nicola Wagner, Oftense Moroeng
World of Coal Ash Proceedings
The global shift toward low-carbon energy systems, electric mobility, and digital technologies has sharply increased the demand for critical minerals, including rare earth elements (REY) vital for permanent magnets, batteries, wind turbines, photovoltaic cells, semiconductors, and modern defence applications. Coal by-products—particularly coal fly ash (CFA) and coal bottom ash (CBA)—are emerging as promising secondary sources of REY, but their economic viability depends on effective enrichment and extraction methods. South Africa’s coal-fired power plants generate nearly thirty million tonnes of coal-ash each year. This study investigates REY concentrations in CFA and CBA collected from five major power stations (PS-1 to PS-5) …
Balancing Infrastructure Demands: Analysis Of Materials Pricing And Supply, Bethany Paris, Ying Li, Steve Waddle, Bryan Gibson
Balancing Infrastructure Demands: Analysis Of Materials Pricing And Supply, Bethany Paris, Ying Li, Steve Waddle, Bryan Gibson
Kentucky Transportation Center Research Report
The Kentucky Transportation Cabinet (KYTC) lets around 700 contracts year valued at over $1 billion. One of KYTC’s foremost goals is to deliver projects on time and on budget. However, over the past five years achieving these twin goals has grown in difficulty due to material shortages, widespread inflation, supply chain disruptions, and the tight labor market triggered by the COVID-19 pandemic. Although material shortages have abated and supply chain disruptions have eased, instability is seemingly a permanent feature of the national and global economies. As such, Cabinet decision makers need reliable tools that can be used to understand historical …
Implementing Wastewater-Based Epidemiology For Long-Read Metagenomic Sequencing Of Antimicrobial Resistance In Kampala, Uganda, William Strike, Temitope O. C. Faleye, Brian Lubega, Alexus Lori Rockward, Soroosh Torabi
Implementing Wastewater-Based Epidemiology For Long-Read Metagenomic Sequencing Of Antimicrobial Resistance In Kampala, Uganda, William Strike, Temitope O. C. Faleye, Brian Lubega, Alexus Lori Rockward, Soroosh Torabi
Biomedical Engineering Faculty Publications
Antimicrobial resistance (AMR) is an emerging global threat that is expanding in many areas of the world. Wastewater-based epidemiology (WBE) is uniquely suited for use in areas of the world where clinical surveillance is limited or logistically slow to identify emerging threats, such as in Sub-Saharan Africa (SSA). Wastewater was analyzed from three urban areas of Kampala, including a local HIV research clinic and two informal settlements. Wastewater extraction was performed using a low-cost, magnetic bead-based protocol that minimizes consumable plastic consumption followed by sequencing on the Oxford Nanopore Technology MinION platform. The majority of the analysis was performed using …
Pathogen Surveillance Of Viruses And Antimicrobial Resistance Through Wastewater Based Epidemiology, William Strike
Pathogen Surveillance Of Viruses And Antimicrobial Resistance Through Wastewater Based Epidemiology, William Strike
Theses and Dissertations--Biomedical Engineering
Pandemic surveillance is a cornerstone in public health safety, as it enables identification of pathogens circulating within a community before they become widespread outbreaks. Wastewater based epidemiology has blossomed in recent years due to its success in the SARS-CoV-2 pandemic, but this form of public health surveillance has a global equity problem. A large majority of the wastewater-based surveillance work has been done in large metropolitan cities with access to advanced testing infrastructure, which poses a challenge as we consider where pandemics have historically emerged. Therefore, there is a need to identify, adapt, and develop workflows to meet the needs …
Development Of Non-Destructive Methods For The Detection And Quantification Of Gluten Sources In Foods, Adewale Abiola Oloyede
Development Of Non-Destructive Methods For The Detection And Quantification Of Gluten Sources In Foods, Adewale Abiola Oloyede
Theses and Dissertations--Biosystems and Agricultural Engineering
Cross-contamination of food with gluten-rich grains such as wheat, barley, and rye remains a significant challenge in gluten-free food production, posing health risks to individuals with gluten-related disorders. Traditional detection methods are often time-consuming and labor-intensive, highlighting the need for rapid and reliable alternatives. This study investigates the use of hyperspectral imaging (HSI) combined with machine learning (ML) and deep learning (DL) techniques for the detection and quantification of gluten contamination in grain-based foods through three main approaches: (i) classification of gluten source contaminants in gluten-free flour, (ii) quantification of gluten content from wheat, rye, and barley flours, and …
Examining The Progress In Additive Manufacturing In Supporting Lean, Green And Sustainable Manufacturing: A Systematic Review, Catherine Maware, Rumbidzai Muvunzi, Tinotenda Machingura, Ilesanmi Daniyan
Examining The Progress In Additive Manufacturing In Supporting Lean, Green And Sustainable Manufacturing: A Systematic Review, Catherine Maware, Rumbidzai Muvunzi, Tinotenda Machingura, Ilesanmi Daniyan
Institute for Sustainable Manufacturing Faculty Publications
The quest for waste reduction and the development of manufacturing processes that meet the economic, social and environmental requirements necessitate this study. Additive manufacturing is an emerging digital technology that can be used to seamlessly develop a product through material deposition in layers. The study aims to investigate the progress made in the development of additive manufacturing to support lean, green and sustainable manufacturing. The study employs a systematic literature review approach, specifically the Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA). A total of 158 articles identified from different academic databases that detailed empirical, conceptual and theoretical findings …
Driver Perception Of Fluorescent Yellow Green Signage, Busisiwe Marole, Keolebogile Bosilong, Tshegofatso Mongae, Namatirai Cheure, Karien Venter
Driver Perception Of Fluorescent Yellow Green Signage, Busisiwe Marole, Keolebogile Bosilong, Tshegofatso Mongae, Namatirai Cheure, Karien Venter
Kentucky Transportation Center Presentations
No abstract provided.
Leveraging Technology For Safer Roads For Vulnerable Road Users In South Africa, Ntombifuthi Ngobeni, Busisiwe Marole, Koketso Bosilong, Hlulani Nkuna
Leveraging Technology For Safer Roads For Vulnerable Road Users In South Africa, Ntombifuthi Ngobeni, Busisiwe Marole, Koketso Bosilong, Hlulani Nkuna
Kentucky Transportation Center Presentations
This research aims to enhance road safety, particularly for Vulnerable Road Users (VRUs) such as pedestrians and cyclists, through the use of both cutting-edge technologies and consideration of conventional engineering methods and solutions. The study focuses on innovative solutions related to the road environment and their impact on VRU safety, piloted at selected sites in South Africa. The research investigates the use of technologies such as video cameras, video analysis software, artificial intelligence and machine learning to conduct route risk assessments. These assessments inform the selection and implementation of effective safety measures tailored to enhance VRU safety. By understanding the …
Adaptation Of Conventional Wheat Flour Mill To Refine Sorghum, Corn, And Cowpea, Michael Joseph, Sajid Alavi, Akinbode A. Adedeji, Lijia Zhu, Jeff Gwirtz, Shawn Thiele
Adaptation Of Conventional Wheat Flour Mill To Refine Sorghum, Corn, And Cowpea, Michael Joseph, Sajid Alavi, Akinbode A. Adedeji, Lijia Zhu, Jeff Gwirtz, Shawn Thiele
Biosystems and Agricultural Engineering Faculty Publications
This study evaluated the refinement of sorghum, corn, and cowpea grains using the processing steps and equipment originally designed for wheat milling that consists of a conventional gradual reduction system. The need to mill these grains resulted from a desire to produce alternative ingredients for developing new fortified blended extruded foods used for food aid programming. Milling of white sorghum grain resulted in a crude protein content of 7.4% (wb) for both whole and coarse-milled flour. The crude protein content in whole fine-milled sorghum was 6.8% (wb), which was significantly lower than that of whole coarse flour at 9.3% (wb). …
Thermal Alteration Of The Mineralogy Of Calcium Sulfoaluminate Cements: Implications For The Performance Of Rapid Repair Materials, Jillian Cavellier
Thermal Alteration Of The Mineralogy Of Calcium Sulfoaluminate Cements: Implications For The Performance Of Rapid Repair Materials, Jillian Cavellier
Theses and Dissertations--Earth and Environmental Sciences
Calcium sulfoaluminate (CSA) was developed in part to lessen the environmental impact of cementitious materials compared to traditional Portland cements. CSA was first put into production in the 1970s and has been undergoing various performance testing to investigate its durability. Yet to be evaluated is CSA’s response to a rapid, high temperature event. In this study, X-ray diffraction, thermogravimetric analysis, Fourier transform infrared spectrometry and scanning electron microscope imaging were used to analyze alterations in the mineralogy due to such an event. As found in previous studies, after ~125°C, ettringite has been completely dehydrated. Ettringite decomposes into bassanite and calcium …
Extraction, Analysis, And Occurrence Of Per- And Polyfluoroalkyl Substances (Pfas) In Wastewater And After Municipal Biosolids Land Application To Determine Agricultural Loading, Justin Caniglia, Daniel D. Snow, Tiffany L. Messer, Shannon Bartelt-Hunt
Extraction, Analysis, And Occurrence Of Per- And Polyfluoroalkyl Substances (Pfas) In Wastewater And After Municipal Biosolids Land Application To Determine Agricultural Loading, Justin Caniglia, Daniel D. Snow, Tiffany L. Messer, Shannon Bartelt-Hunt
Biomedical Engineering Faculty Publications
Given the ubiquitous detection of per- and polyfluoroalkyl substances (PFAS) within numerous soil and water environmental compartments, there is a need for global understanding of current methodologies for extracting water, solids, polar organic chemical integrative samplers (POCIS), and plant tissue for these substances. This study provides details of several current extraction methods, demonstrates the use of POCIS in monitoring these compounds in a wastewater environment, and provides evidence of detectable levels of certain PFAS compounds within Midwestern municipalities and agroecosystems. Validated extraction procedures help characterize occurrence and release of 18 PFAS in a midwestern wastewater treatment plant (WWTP), surface water, …
Reduced-Scale Experiments And Numerical Simulations Of Informal Settlement Dwelling Fires, Vigneshwaran Narayanan, Antonio Cicicone, Ayden D. Botha, Richard Shaun Walls
Reduced-Scale Experiments And Numerical Simulations Of Informal Settlement Dwelling Fires, Vigneshwaran Narayanan, Antonio Cicicone, Ayden D. Botha, Richard Shaun Walls
Progress in Scale Modeling, an International Journal
Informal settlement dwellings (ISDs) house approximately one billion people in the developing world and this number is expected to double by the year 2030. Contemporary research on ISD fires has focused on understanding the fire dynamics within individual dwellings (micro-scale) and fire spread in settlements consisting of multiple dwellings (macro-scale). This paper aims to do two primary things: investigate if scaling methods that were derived for compartments with thermally thick boundaries can be applied to ISDs (compartments with thermally thin boundaries), and if they can adequately represent the most important phenomena associated with full-scale ISD fires; and demonstrate Fire Dynamics …
Global Opportunities And Challenges For Coal Combustion Products With A Circular Economy, Craig Heidrich, Joachim Feuerborn
Global Opportunities And Challenges For Coal Combustion Products With A Circular Economy, Craig Heidrich, Joachim Feuerborn
World of Coal Ash Proceedings
No abstract provided.
Evidence Of Coal Conversion In The Majuba Underground Coal Gasification Pilot Plant, South Africa, L.S. Mokhahlane, N.J. Wagner, D. Vermeulen
Evidence Of Coal Conversion In The Majuba Underground Coal Gasification Pilot Plant, South Africa, L.S. Mokhahlane, N.J. Wagner, D. Vermeulen
Coal Combustion and Gasification Products Journal Archive
Underground coal gasification (UCG) is a coal conversion method that permits coal resources to be exploited in situ using high-temperature conversion reactions. An understanding of the chemical, mineralogical, and petrographic properties of the coal, and resultant unburned carbon, degasified coal, and ash (minerals) in the UCG gasification zone, is fundamental to determining conversion rates, gas composition, and environmental and groundwater risk assessments. This study aims to provide a mineralogical and petrographic characterization of UCG residues obtained from the Eskom Majuba UCG pilot plant site in South Africa. Samples were selected from a verification borehole (VH3) drilled at the site following …
Investigation Of Pfas Exposure Risks In Kentucky Using Mapping Tools, Sweta Ojha
Investigation Of Pfas Exposure Risks In Kentucky Using Mapping Tools, Sweta Ojha
Theses and Dissertations--Civil Engineering
Per- and polyfluoroalkyl substances (PFAS), a group of environmentally-persistent compounds, are environmentally ubiquitous and challenging to remediate. Several studies show that PFAS are detected in drinking water systems when sampling is conducted, making human exposure via drinking water an important health consideration. This research: 1) develops a mapping tool for prioritizing sampling locations; 2) establishes a method for making GIS data and meta(data) in the mapping tool accessible; 3) fosters decision making by integrating knowledge brokering and the alignment interest and influence matrix (AIIM). The tool developed is this research is a geospatial and statistical PFAS hot-spot screening model that …
Development Of Univariate And Multivariate Forecasting Models For Methane Gas Emissions In Underground Coal Mines, Juan Diaz
Theses and Dissertations--Mining Engineering
Methane gas management continues to be a challenge concerning underground coal mine safety and productivity worldwide despite the extraordinary effort of the mining industry, governmental agencies, and academia to develop new technologies to monitor and control methane gas emissions more efficiently. The risk of hazardous methane gas concentrations in underground environments cannot be underestimated. Statistical data for the last 100 years indicate that around 80% of the accidents and 90% of the fatalities in the underground coal mining industry in the US were related to methane gas explosions.
Modern underground mine operations monitor and evaluate atmospheric parameters such as barometric …
Laptop Recycling Case Study: Estimating The Contained Value And Value Recovery Process Feasibility Of End-Of-Life Consumer Electronics, Zebulon Hart
Theses and Dissertations--Mining Engineering
Work has been done to establish, through the development and use of novel assay techniques and analysis metrics, the contained value of a sampling of laptop computers (as an analog for myriad e-waste sources). This work has conceptualized e-waste as an alternative to geologic-origin complex metallic ores and has likewise evaluated the feasibility of value recovery from e-waste sources in a similar manner to an ore. The application of conventional and novel mineral separation techniques to e-waste recycling processes has been evaluated and positive results are demonstrated. Further, this work has demonstrated the ability to identify the presence of base …
Parametric Numerical Analysis Of Inclined Coal Pillars, Robin Flattery
Parametric Numerical Analysis Of Inclined Coal Pillars, Robin Flattery
Theses and Dissertations--Mining Engineering
Pillars are used as the primary support structures for underground mining to maintain stability by supporting the over laying strata. In the case of horizontal seams, the pillars are typically subjected to axial loading due to the weight of the overburden and/or abutment stresses, while in the case of inclined seams they are subjected to oblique loading due to both the vertical and horizontal in-situ stress. Over the years numerous studies have been completed on square and rectangular pillars in horizontal seams that have resulted in several pillar stability equations and criteria. However very few studies are available with respect …
Development Of Univariate And Multivariate Forecasting Models For Methane Gas Emissions In Underground Coal Mines, Juan Diaz
Theses and Dissertations--Mining Engineering
Methane gas management continues to be a challenge concerning underground coal mine safety and productivity worldwide despite the extraordinary effort of the mining industry, governmental agencies, and academia to develop new technologies to monitor and control methane gas emissions more efficiently. The risk of hazardous methane gas concentrations in underground environments cannot be underestimated. Statistical data for the last 100 years indicate that around 80% of the accidents and 90% of the fatalities in the underground coal mining industry in the US were related to methane gas explosions.
Modern underground mine operations monitor and evaluate atmospheric parameters such as barometric …
Nondestructive Multivariate Classification Of Codling Moth Infested Apples Using Machine Learning And Sensor Fusion, Nader Ekramirad
Nondestructive Multivariate Classification Of Codling Moth Infested Apples Using Machine Learning And Sensor Fusion, Nader Ekramirad
Theses and Dissertations--Biosystems and Agricultural Engineering
Apple is the number one on the list of the most consumed fruits in the United States. The increasing market demand for high quality apples and the need for fast, and effective quality evaluation techniques have prompted research into the development of nondestructive evaluation methods. Codling moth (CM), Cydia pomonella L. (Lepidoptera: Tortricidae), is the most devastating pest of apples. Therefore, this dissertation is focused on the development of nondestructive methods for the detection and classification of CM-infested apples. The objective one in this study was aimed to identify and characterize the source of detectable vibro-acoustic signals coming from CM-infested …
Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei
Scale Model Equations And Optimization For Annular Flow Of Non-Newtonian Fluids Between Eccentric And Rotating Cylinders, Wei Zhang, Pooya Khodaparast, Amin Mehrabian Dr., Amir Shojaei
Progress in Scale Modeling, an International Journal
A broad range of engineering applications involves helical flow of non-Newtonian fluids between two eccentric cylinders. These applications often require estimation of the frictional pressure losses along the axes of the cylinders. Laboratory flow loops are commonly used to study the flow characteristics at smaller scales of investigation. This study uses the laws of similarity and dimensional analysis to obtain a set of scaling equations between the laboratory and prototype scales of the described annular flow. These equations are derived for four types of fluid rheology including Newtonian, power-law, Bingham-plastic, and yield power-law.
Results are expressed through a set of …
Parametric Analysis Of Rib Pillar Stability In A Longitudinal Sublevel Open Stoping Operation In An Underground Copper Mine In Southern Africa, Kostas Kaklis, Zacharias Agioutantis, Munyindei Masialeti, Jerome Yendaw, Thierry Bineli Betsi
Parametric Analysis Of Rib Pillar Stability In A Longitudinal Sublevel Open Stoping Operation In An Underground Copper Mine In Southern Africa, Kostas Kaklis, Zacharias Agioutantis, Munyindei Masialeti, Jerome Yendaw, Thierry Bineli Betsi
Mining Engineering Faculty Publications
The pillar stability factor (PSF) is calculated in three different mining stages for a sublevel open stoping mining project located in northern Botswana. Several three-dimensional finite element models were developed by varying the stope span. Pillar strength was estimated using the Lunder and Pakalnis equation and pillar stress was obtained from the numerical models. As mining progresses, both the first and second mining stages meet the rib pillar stability factor requirement for safe extraction. Geometrical improvements are suggested in the mining layout for the third mining stage to achieve the required PSF, which is based on international practices.
Hydrocracking Of Octacosane And Cobalt Fischer–Tropsch Wax Over Nonsulfided Nimo And Pt-Based Catalysts, Wenping Ma, Jungshik Kang, Gary Jacobs, Shelley D. Hopps, Burtron H. Davis
Hydrocracking Of Octacosane And Cobalt Fischer–Tropsch Wax Over Nonsulfided Nimo And Pt-Based Catalysts, Wenping Ma, Jungshik Kang, Gary Jacobs, Shelley D. Hopps, Burtron H. Davis
Center for Applied Energy Research Faculty and Staff Publications
The effect of activation environment (N2, H2 and H2S/H2) on the hydrocracking performance of a NiMo/Al catalyst was studied at 380 °C and 3.5 MPa using octacosane (C28). The catalyst physical structure and acidity were characterized by BET, XRD, SEM-EDX and FTIR techniques. The N2 activation generated more active nonsulfided NiMo/Al catalyst relative to the H2 or H2S activation (XC28, 70–80% versus 6–10%). For a comparison, a NiMo/Si-Al catalyst was also tested after normal H2 activation and showed higher activity at the same process …
In Situ Imaging Of Bacterial Outer Membrane Projections And Associated Protein Complexes Using Electron Cryo-Tomography, Mohammed Kaplan, Georges Chreifi, Lauren Ann Metskas, Janine Liedtke, Cecily R. Wood, Catherine M. Oikonomou, William J. Nicolas, Poorna Subramanian, Lori A. Zacharoff, Yuhang Wang, Yi-Wei Chang, Morgan Beeby, Megan J. Dobro, Yongtao Zhu, Mark J. Mcbride, Ariane Briegel, Carrie L. Shaffer, Grant J. Jensen
In Situ Imaging Of Bacterial Outer Membrane Projections And Associated Protein Complexes Using Electron Cryo-Tomography, Mohammed Kaplan, Georges Chreifi, Lauren Ann Metskas, Janine Liedtke, Cecily R. Wood, Catherine M. Oikonomou, William J. Nicolas, Poorna Subramanian, Lori A. Zacharoff, Yuhang Wang, Yi-Wei Chang, Morgan Beeby, Megan J. Dobro, Yongtao Zhu, Mark J. Mcbride, Ariane Briegel, Carrie L. Shaffer, Grant J. Jensen
Veterinary Science Faculty Publications
The ability to produce outer membrane projections in the form of tubular membrane extensions (MEs) and membrane vesicles (MVs) is a widespread phenomenon among diderm bacteria. Despite this, our knowledge of the ultrastructure of these extensions and their associated protein complexes remains limited. Here, we surveyed the ultrastructure and formation of MEs and MVs, and their associated protein complexes, in tens of thousands of electron cryo-tomograms of ~90 bacterial species that we have collected for various projects over the past 15 years (Jensen lab database), in addition to data generated in the Briegel lab. We identified outer MEs and MVs …
Geomagnetic Disturbances (Gmd) Impacts On Protection Systems, Qun Qiu, V. Madani, Tapan Manna, T. Raffield, S. Klecker, Yuan Liao, S. Meliopoulos, D. Fontana
Geomagnetic Disturbances (Gmd) Impacts On Protection Systems, Qun Qiu, V. Madani, Tapan Manna, T. Raffield, S. Klecker, Yuan Liao, S. Meliopoulos, D. Fontana
Electrical and Computer Engineering Presentations
This paper provides background and historical events of Geomagnetic Disturbances (GMD), and reviews GMD impacts on power systems equipment, and associated protection and control systems, mitigating measures, and Geomagnetic Induced Current (GIC) monitoring methods. This paper is a summary of the IEEE PES-TR72 report, titled, GMD Impacts on Protection Systems, prepared by the K17 Working Group of the IEEE Power System Relaying and Control committee.
Solar Disinfection Of Turbid Hygiene Waters In Lexington, Ky, Usa, Atena Amirsoleimani, Gail M. Brion
Solar Disinfection Of Turbid Hygiene Waters In Lexington, Ky, Usa, Atena Amirsoleimani, Gail M. Brion
Civil Engineering Faculty Publications
Solar disinfection (SODIS) could be a key to providing a clean, hygiene water for birthing uses, but the recommended climate zone is limited, the microbial indicators are related to gastrointestinal illness and not wound infections. SODIS feasibility was investigated to remove Escherichia coli from turbid water at temperatures less than 50 °C in Lexington, KY. Increasing turbidity from 0 to 200 NTU decreased E. coli inactivation from 5 to 1 log. With the same experimental protocol, more than 4-log inactivation of Staphylococcus aureus and Staphylococcus epidermidis (common human-skin microorganisms related to serious post-partum infections of both mother and child) was …
Analysis Of Covid-19 Concerns Raised By The Construction Workforce And Development Of Mitigation Practices, Makram Bou Hatoum, Ali Faisal, Hala Nassereddine, Hadi Sarvari
Analysis Of Covid-19 Concerns Raised By The Construction Workforce And Development Of Mitigation Practices, Makram Bou Hatoum, Ali Faisal, Hala Nassereddine, Hadi Sarvari
Civil Engineering Faculty Publications
The coronavirus outbreak has created a global health crisis that has disrupted all industries, including the construction industry. Following the onset of the pandemic, construction workers faced and continue to face unprecedented safety and health challenges. Therefore, construction employers established new safety precautions to protect the health and safety of the workforce and minimize the spread of the virus. The new precautions followed the advice and guidelines offered by different health and safety agencies like the Occupational Safety and Health Administration (OSHA), Centers of Disease Control and Prevention (CDC), and the Associated General Contractors of America (AGC). With construction projects …
Transforming Corn Stover To Useful Transport Fuel Blends In Resource-Limited Settings, Nicholas Munu, Noble Banadda, Nicholas Kiggundu, Ahamada Zziwa, Isa Kabenge, Jeffrey Seay, Robert Kambugu, Joshua Wanyama, Albrecht Schmidt
Transforming Corn Stover To Useful Transport Fuel Blends In Resource-Limited Settings, Nicholas Munu, Noble Banadda, Nicholas Kiggundu, Ahamada Zziwa, Isa Kabenge, Jeffrey Seay, Robert Kambugu, Joshua Wanyama, Albrecht Schmidt
Chemical and Materials Engineering Faculty Publications
Development of local technologies is crucial to the sustainable energy agenda in resource-limited countries and the world. Strengthening local green technologies and promoting local utilization will reduce carbon emissions that could be generated during transportation and delivery of green products from one country to another. In this paper we developed bio-oil/diesel blends using a low-tech pyrolysis system designed for smallholder farmers in developing countries and tested their appropriateness for diesel engines using standard ASTM methods. Corn stover retrieved from smallholder farmers in Gayaza, Uganda were pyrolyzed in a batch rocket stove reactor at 350 °C and liquid bio-oil harvested. Bio-oil …
Application Of A Novel Ventilation Simplification Algorithm, Caitlin V. Strong
Application Of A Novel Ventilation Simplification Algorithm, Caitlin V. Strong
Theses and Dissertations--Mining Engineering
Ventilation network analysis is an integral part of maintaining a safe mine environment. Despite its important role, liberties are often taken with the representation of networks in ventilation network analysis software. In order to provide an alternative to heuristic methods used by ventilation engineers, a simplification algorithm has been developed. This algorithm is designed to work as a compliment to ventilation software. Comparisons of original ventilation networks and simplified networks show little to no change in fan operating point. The program utilizing this algorithm provides an alternative to reducing networks with a parallel factor. It can also be used in …