Engineering Commons^™

A Tool For Assessing The Effectiveness Of Speed Humps As Traffic Calming Measure, Abdulrazak Mzamiru Kachwamba, Enock W. Nshama

Tanzania Journal of Engineering and Technology (TJET)

Urban population growth and increasing motor vehicle usage continue to raise concerns regarding road safety in rapidly developing cities. Although previous studies have assessed traffic-calming effectiveness using multiple criteria, they have analysed the criteria separately and have not developed a composite tool for classifying overall effectiveness. This study develops a quantitative assessment tool designed to compute a weighted composite score for evaluating the effectiveness of speed humps as a traffic calming measure. Stakeholder questionnaire responses, complemented by descriptive analysis and exploratory factor analysis, were used to identify key indicators of effectiveness and the variables influencing them. Findings indicate that speed …

Artificial Neural Network-Based Modelling And Prediction Of Key Performance Indicators In Road Construction Projects, Hussein Mativila, John M. Kafuku, Beatus A. T. Kundi

Tanzania Journal of Engineering and Technology (TJET)

Road construction projects in developing countries including Tanzania experience several challenges including cost overruns, schedule delays and poor quality. The causes of these challenges include complex interdependencies project’s uncertainty factors. This makes traditional methods for predicting Key Performance Indicators (KPIs) less effective. This study has developed a robust Artificial Neural Network (ANN) model for accurate modelling and predicting KPIs for road construction projects in Tanzania. The analysis was based on data obtained from 281 projects implemented by TANROADS in 11 regions from 2015 to 2025. Fourteen uncertainty factors were measured on a five-point Likert scale and screened using Principal Component …

Feasibility Of Acetylated Icacina Trichantha Oliv. Tuber Starch As Viscosity And Fluid Loss Control Agents In Water-Based Drilling Mud. A Comparative Assessment With Commercial Starch, Kennedy I. Ogunwa, Theresa O. Uchechukwu, Ozioma Achugasim, Leo C. Osuji, Onyewuchi Akaranta

Tanzania Journal of Science

The need for sustainable, non-food drilling fluid additives has prompted the feasibility assessment of acetylated Icacina trichantha tuber starch as a viscosity modifier and fluid loss control agent in water-based muds. Native starch was acetylated to obtain two derivatives (Degree of Substitution DS = 0.38 and 0.68) and characterized using FTIR, swelling power, and physicochemical analyses. Drilling mud performance was assessed through rheology, gel strength, filtration loss, sorptivity, and model fitting. Acetylation improved swelling and reduced gelatinization temperature. The optimal formulation, Mud-ITO-ACS2 (DS = 0.68), exhibited the most favorable performance, combining low plastic viscosity (6 cP vs 9 cP for …

Biosensor Development In East Africa: A Systematic Review Of Technologies, Applications, Challenges, And Future Directions, Ally Mahadhy

Tanzania Journal of Science

Biosensors integrate biological recognition elements with signal transduction systems to generate quantitative or semi-quantitative analytical information and have applications across healthcare, food safety, agriculture, environmental monitoring, and wildlife health. Despite substantial global advances, biosensor development in East Africa remains poorly characterized. This systematic review, conducted according to PRISMA 2020 guidelines, evaluated published evidence from 1995 to 2025 within a predefined East African Community geographical scope. Eligibility was based on IUPAC-aligned operational criteria requiring an integrated biological recognition element, transduction mechanism, and quantitative or semi-quantitative signal output. Three locally developed biosensors met the criteria: an electrochemical nano-biosensor for schistosomiasis diagnosis in …

Recent Advances In Bioethanol Production From Water Hyacinth: A Critical Review, Umuamina A. Matola, Mahir Mohammed Said, Olga-Ioanna Kalantzi, Abraham K. Temu

Tanzania Journal of Engineering and Technology (TJET)

Water hyacinth (WH) is a highly invasive tropical aquatic weed with high holocellulose and low lignin content, making it a promising lignocellulosic feedstock for second-generation bioethanol production. Producing bioethanol from WH offers a sustainable approach to simultaneously managing invasive biomass and producing renewable energy. This review critically evaluates recent advancements in bioethanol production from WH by examining pretreatment, hydrolysis, and fermentation technologies reported between 2014 and 2024. A PRISMA-guided literature search was conducted using the Scopus and Web of Science databases, and fifty-nine original research articles were selected for analysis. The reviewed studies were comparatively assessed based on pretreatment strategies, …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Decision Support Tool For The Maintenance Of Meter Gauge Railway Permanent-Way Infrastructures: A Concept Paper, Hamisi J. Maulid, Beatus A.T Kundi, Juma M. Matindana, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

A Decision Support Tool (DST) represents a transformative way of modernising maintenance practice on the permanent-way infrastructure of Meter Gauge Railway (MGR). Maintenance practice remains largely reactive, as the MGR plays a strategic role in transporting both freight and passengers, resulting in inefficient resource allocation, high operational risk, and growing Lifecycle expenses. This concept paper explores the potential and the design challenges for a DST that combines fuzzy analytic hierarchy process (Fuzzy-AHP) modelling, multi-criteria decision analysis (MCDA), Geographic Information Systems (GIS) and predictive machine learning (ML) analytics for evidence-based, future-oriented maintenance management. The paper draws on peer-reviewed studies from …

Improving The Concrete Compressive And Flexural Strength With A Low Fraction Addition Of Carboxylated Nitro-Oxidized Cellulose Nanofibrils From Banana Rachis, Ngesa Ezekiel Mushi, Emmanuel Kagya

Tanzania Journal of Science

Conventionally, concrete strength depends on the bonding interface, especially in hydrated products such as calcium silicate hydrate (CSH). As a result, concrete is sensitive to tensile load. With its unique properties, a low fraction of carboxylated nitro-oxidized cellulose nanofibrils (NOCNF) from the banana rachis is employed to improve the mechanical performance of the concrete nanostructurally. Compressive and flexural strength using the NOCNF content at 0, 0.05, and 0.1 wt.%, cured for 7 and 28 days, were evaluated. Notably, the compressive strength increased by 16 % and the flexural strength by 13 % at 0.1 wt.% NOCNF compared to plain concrete …

Assessment Of The Radionuclide Concentration Levels Of Water And Sediments Along The Mara River, Gasper Kachenge, Abubakary Salama, Abdalah Kileo, Furaha Chuma

Tanzania Journal of Science

For many years, several factors have impacted the water quality of the Mara River, including population growth, agricultural expansion, livestock keeping, mining, and industrial activities. These factors have intensified water pollution and climate change effects around the river. While previous studies have mainly focused on assessing heavy metal pollution risks on the Mara River, this study evaluates the concentration levels of radionuclides in boreholes, water, and sediments along the river and its tributaries. Naturally occurring radioactive materials, including 226Ra, ²³²Th, and ⁴⁰K, were evaluated. A high-purity germanium radiation detector (HPGe) with a coaxial detector system coupled with Gamma Vision software …

The Role Of Zinc Precursor Concentration In Modulating The Structural, Optical, And Electrical Properties Of Sol-Gel Derived Czts Thin Films, Justine John Tibaijuka

Tanzania Journal of Science

This study reports on CZTS thin films fabricated by sol–gel spin coating using zinc acetate dihydrate, copper acetate dihydrate, tin chloride, and thiourea dissolved in methanol with monoethylamine as a stabilizer. The films were annealed rapidly at 540 °C by using an RTP furnace. Results show the significant influence of zinc concentration on films’ properties with band gap evolution between 1.46 and 1.7 eV, along with high absorption coefficients exceeding 10⁴ cm⁻¹ in the visible range. Structurally, the films evolved from poorly crystalline at low Zn content to well- crystallized, (112)-oriented kesterite near stoichiometry. However, excessive Zn caused slight degradation …

Hybrid Solar - Coal Thermal Energy System For Industrial Process Heat At Sayona Drinks Limited In Tanzania, Santos Kihwele, Elisha D. Bitesigirwe

Tanzania Journal of Engineering and Technology (TJET)

Over the past two decades, global efforts to mitigate pollution from conventional energy sources have intensified, with coal remaining a major contributor to carbon emissions. While fossil fuels cannot be eliminated from thermal generation in manufacturing industries, particularly in middle‑income countries such as Tanzania, they continue to dominate as the primary energy source. Industries including food and beverage, paper, textile, paints, chemicals, and pharmaceuticals require substantial thermal energy for heating and drying, and typically rely on coal and natural gas.This study introduces a unique application of a parabolic trough solar thermal system with integrated thermal energy storage, specifically tailored to …

Optimal Design And Techno-Economic And Environmental Analysis Of A Hybrid Solar Pv-Battery-Generator System For Off-Grid Telecom Towers And Rural Households: Case Of Misughaa Village In Tanzania, Ibrahim Mwammenywa, Martha Mwaikenda

Tanzania Journal of Engineering and Technology (TJET)

Telecommunication services are pivotal for the socio-economic development of communities, regions, and countries. Extensive and reliable telecom infrastructure enables populations to leverage development opportunities and bridge the urban-rural divide. However, extending these services to rural areas often necessitates the deployment of telecommunication towers in locations lacking national grid access. Consequently, service providers typically rely on diesel generators (DG) for power, which introduces significant challenges. These challenges include a high operational expenditure (OPEX), rendering telecom services unaffordable for rural communities, and substantial environmental pollution from greenhouse gas (GHG) emissions. This study aims to present an optimal design, encompassing sizing and economic …

Voltage Profile Enhancement In Iliceto Shield Wire Scheme For Rural Electrification: Case Study Of Chalinze-Mbwewe Transmission Line In Tanzania, Ebeneza Chaula, Ibrahim Mwammenywa, Santos Kihwele

Tanzania Journal of Engineering and Technology (TJET)

Rural electrification faces challenges due to significant voltage drops over long transmission distances, affecting reliability and power quality. While the Iliceto Shield Wire Scheme (ISWS) offers a modern cost-effective solution, voltage stability remains a challenge. This study analyses voltage profile enhancement within ISWS, focusing on the Chalinze-Mbwewe section of the 132 kV transmission line, using LTSpice simulations. Due to LTSpice limitations, direct solar PV integration was mimicked by introducing a secondary voltage source at each load centre, producing 33 kV to match the original source voltage. This approach maintained improved voltage profile from Msoga Village to Mbwewe over 80.9 Kilometers. …

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Load Flow And Fault Performance Evaluation Of Interconnected Minigrids In Uganda Using Digsilent Powerfactory, Prossy Mutesi, Santos Kihwele, Emmanuel Matee

Tanzania Journal of Engineering and Technology (TJET)

The increasing demand for decentralized, reliable electricity in rural Sub-Saharan Africa has catalyzed the deployment of minigrids as an intermediate electrification strategy. This study investigates two solar photovoltaic (PV) mini-grids: Kyamugarura and Kanyegaramire, located in western Uganda, approximately 3km apart. Each mini grid initially consisted of 13 kW installed photovoltaic (PV) capacity, supplying power to households and small businesses. Due to rising demand and regular evening blackouts, both mini-grids are being upgraded to 57 kWp each. The integration of these upgraded systems into the national utility grid is proposed and simulated to evaluate performance improvements under two medium-voltage interconnection options: …

Load Profile Analysis And Forecasting For Rural Mini Grids In Uganda, Prossy Mutesi, Santos L. Kihwele, Emmanuel S. Matee

Tanzania Journal of Science

Accurate load forecasting is essential for the reliable and cost-effective operation of rural mini grids, where constrained generation capacity and high penetration of renewable energy resources require well-informed operational decisions. This study examines electricity demand characteristics and forecasting performance for the Buzaami and Ssenyondo mini grids in Uganda, with particular focus on diurnal load profiles, peak demand behavior, and seasonal variability. 2022 operational data show extended peak demand from early morning to late evening, driven by socio-economic activities that strain resource scheduling and reliability management. To address these challenges, the study evaluates and compares Long Short-Term Memory (LSTM) networks, fuzzy …

Optimization Of Bio-Briquettes Production From Cassava Stems Co-Blended With Sisal Bole Bagasse Using Response Surface Methodology, Agnes Nshoma Msobi, Neema O. Msuya, Kando Khalifa Janga

Tanzania Journal of Science

This research aimed at producing bio-briquettes from cassava stems and sisal bole bagasse as an alternative source of cooking energy. A Response Surface Methodology (RSM) with Face - Centered Central Composite Design (FCCCD) featured a multi-objective optimization of the effect of the production parameters, focusing on maximizing char yield and Higher Heating Value (HHV) of the produced briquette while minimizing carbonization temperature and residence time. The findings showed that bio-briquettes produced at the lowest temperature (250 ℃) and residence time (30 min) and the blending ratio of 75% by 25% had the highest char yield of 76.92% and HHV of …

Modelling And Analysis Of 50 Mwp Solar Pv Integration Into Tanzania’S Transmission Network: A Case Study Of Tagamenda Substation, Iringa Region, Santos Kihwele

Tanzania Journal of Science

While increasing the share of renewable energy in the grid, grid integration studies for the utility solar photovoltaic (PV) plants are vital, given their intermittency and the fact that Tanzania has never had one connected to the grid. This paper presents a 50 MWp grid integration study, including a technical analysis conducted using PSS®E software. The study investigates the grid behaviour during the integration of the 50 MWp solar plant, considering the most suitable technical and economic solutions. The study analysed the load flow under normal conditions, contingency analysis (N-1), short- circuit analysis, and voltage stability assessment. The results show …

A Review Of Energy Storage Technologies With Hydro Energy System Design For Off-Grid Electricity, Daniel H. Ngoma, Banet L. Masenga

Tanzania Journal of Engineering and Technology (TJET)

Many renewable energy sources such hydropower—particularly small-scale run-of-river and micro-hydro—offers reliable, low-cost generation. However, their inherent intermittency (due to seasonal flow variations) and inability to instantly match demand necessitate integrated energy storage to ensure a stable, continuous power supply. This review synthesizes contemporary energy storage technologies in the context of their integration with off-grid hydro energy system design.

The study examine a spectrum of storage solutions, evaluating their technical characteristics, costs, and suitability for hybrid hydro applications. Pumped Hydro Storage (PHS), while highly efficient and large-scale, is often geographically constrained and capital-intensive for small off-grid projects. Battery Energy Storage Systems …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Elemental And Mineralogical Characterization Of Permo-Carboniferous Coal In The Ngaka Coalfield, Southwest Tanzania: Implications For Coal Quality Variation, John W. Gama, Justina J. Saroni, Remigius L. Gama

Tanzania Journal of Science

Coal from heterolithic seams exhibits distinct chemical characteristics due to interbedded non-coal beds, which influence its quality and usability. Despite extensive research in these settings, the elemental and mineralogical characteristics of the heterolithic sequences of the Mchuchuma Formation (K2) in the Ngaka Coalfield remain poorly documented. This study provides the first detailed assessment of K2 seams across five active mine sites. Eleven representative samples were analyzed using proximate, elemental, and mineralogical techniques, supported by Pearson correlation, binary analysis, and Principal Component Analysis. Proximate analysis revealed that ash content varies across mine sites, with values ranging from 9.17 to 25.03%, volatile …

Techno-Economic Analysis Of Captive Solar Power Systems For Tanzania’S Manufacturing Sector: Barriers, Opportunities, And Feasibility, Edson Uhale, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

This study provides a comprehensive techno-economic analysis of the barriers, opportunities, and feasibility of adopting captive solar photovoltaic (PV) systems in Tanzania’s industrial manufacturing sector. Despite Tanzania’s high solar irradiation potential, averaging 4.5 to 7.0 kWh/m²/day, the uptake of captive solar systems remains minimal, with only 2.3 percent of surveyed firms currently using solar energy, primarily for non-productive uses such as security lighting. Using a mixed-methods approach, data were collected from 43 manufacturing firms in the Dar es Salaam and Pwani regions through structured questionnaires, supported by PVSyst simulations and financial modelling to assess two system configurations: grid-connected PV systems …

The Use Of Local Materials For The Interior Quality Of Swahili Building Design In Tanzania, Luiana Makundi, Jacob Lutta

Tanzania Journal of Engineering and Technology (TJET)

Swahili architecture in Tanzania is recognized by spatial capacity to adapt environmental changes. This research explores the role of locally available materials in shaping the interior quality by focusing on functional, aesthetic appeal and supporting sustainable environment. A mixed-methods approach was applied which, involves field surveys, case study and interviews with different local professionals in building industry. Dar-es-Salaam was used as a case study area that was critically analysed to identify construction practices and applications of local materials in building interior spaces. A particular focus was placed on materials durability, aesthetic, ecological, environmental balance and thermal efficiency which seems to …

Combined Optimisation Of Machining Parameters, Tool Wear, Dimensional Errors And Quality Deviations In Multi-Pass Turning Operations, Mussa I. Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

Measurements of on-line tool wear and part dimensional accuracy in machining operations are not readily available in machining shop floor because they involve higher investment such that the decisions of tool wear and part quality for intermediate cutting passes cannot be justified. This paper demonstrates how the optimisation of machining parameters can be made together with tool wear and part quality for turning operations. Two optimisation models were developed for maximum material removal rate and minimum production cost. A theoretical framework was initially presented before the two models were formulated. Input data for the models were adopted from previous studies …

Analysing The Impact Of Bi-Directional Application Of Iliceto Shield Wire Scheme For Rural Electrification In Tanzania: A Chalinze-Hale Transmission Line Case Study, Santos Kihwele, Prisca Paul

Tanzania Journal of Engineering and Technology (TJET)

Clean energy accessibility including electricity remains a major challenge in Tanzanian villages despite the many efforts made by its government.  The primary obstacle is that these villages are located more than 100 kilometres away from high-voltage to medium-voltage (HV/MV) transformer stations. Therefore, electrifying these villages by conventional method is financially not feasible. One of the low-cost rural electrification techniques that can be used to solve the issue is the "Iliceto Shield Wire Scheme" (ISWS) technology, In Tanzania, the application of ISWS technology seems to be very promising.  However, the technology can be integrated with locally available renewable energy sources ( …

The Performance Of Satellite-Based Precipitation Data To Reproduce Observed Precipitation In Tanzania's Little Ruaha Catchment, Florence H. Mahay

Tanzania Journal of Engineering and Technology (TJET)

Satellite-based precipitation datasets have emerged as promising tools for addressing rainfall data scarcity in regions with limited ground observations, such as Sub-Saharan Africa. This study evaluates the performance of five satellite-based precipitation products CHIRPS, CPC, GPCC, MERRA-2, and ERA5 in capturing rainfall characteristics over the Little Ruaha Catchment in Tanzania. The assessment was carried out at daily, monthly, and seasonal timescales and focused on key rainfall indices including onset and cessation dates, length of the rainy season, total rainfall, and frequency of rainy days. Validation was conducted using statistical indicators such as the correlation coefficient (r), Nash–Sutcliffe Efficiency (NSE), Root …

Techno-Economic Analysis Of Hybrid Pv-Wind-Diesel Generator Swarm Grid For Rural Electrification In Tanzania, Ibrahim Mwammenywa

Tanzania Journal of Engineering and Technology (TJET)

Remote, rural, and off-grid communities, particularly in Sub-Saharan Africa (SSA), face significant challenges in securing reliable and affordable electricity. While solutions such as solar home systems (SHSs) and diesel generators (DGs) have been adopted by some individuals, their deployment is often not optimized to meet the full load demand. This study addresses this challenge by proposing a hybrid swarm grid (HSG) design that integrates photovoltaic (PV), wind energy, and diesel generators (DGs). Utilizing MATLAB/Simulink and HOMER, the HSG is modeled and optimized for a typical SSA village, incorporating real-world variables such as load demand profiles, solar irradiance, and wind patterns. …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa, Bavo B. Nyichomba

Tanzania Journal of Engineering and Technology (TJET)

This paper elucidates initiatives taken by the Royal Academy of Engineering, UK, to overcome barriers in education and training in Sub-Sahara African higher learning engineering institutions. The said barriers include mismatches of curriculum, ineffectual teaching and learning and little exposure of academic staff to engineering practice. In order to overcome such barriers, the Royal Academy of Engineering established the two programmes in the region. The first one, Enriching Engineering Education Programme (EEEP) from 2014/15 to 2015/16 where the University of Dar es Salaam coordinated this programme as a hub for East African universities namely; Makerere University (Uganda), Moi University (Kenya), …

Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …