Engineering Commons^™

Highly Power Dense Dc To Three-Phase Ac Modular Converters With Tiny Module Capacitors, Wiwin Hartini Lew

Dissertations and Theses

A Modular Multilevel Converter (MMC) is an attractive candidate in high power conversion due to its modularity and scalability. The energy storage element, namely the module capacitance in the MMC submodule circuit, is typically large and when scaled to convert high power, requires very bulky module capacitors. In addition to deteriorating the power density, the design necessitates the use of electrolytic capacitors, which further affects the overall converter efficiency and reliability. This research presents an MMC submodule topology and the accompanying modulation approach that reduces the submodule capacitance requirements significantly compared to conventional MMC topology (few micro-farads versus several milli-farads). …

An Experimental Study Of Norton And Thule Cooking Pot Performance, Caelie Marshall Butler

Dissertations and Theses

Ceramic technology was adopted by hunter-gatherers of the Paleo-Inuit Norton tradition in the Western Arctic between 2800 and 2500 years B.P., corresponding with an increase in the use of aquatic resources. Pottery production and use continued until approximately 1,500 BP, and resumed during the Neo-Inuit Birnirk and Thule periods, approximately 1,350 years BP. The technical characteristics of Norton and Thule ceramics suggest they performed differently when used for cooking, with Norton ceramics best suited for cooking using direct or suspended heat, and Thule ceramics best suited for indirect heat. Prior experimental archaeological research has focused on Thule ceramics, with limited …

Development Of A Configurable Real-Time Event Detection Framework For Power Systems Using Swarm Intelligence Optimization, Umar Farooq

Dissertations and Theses

Modern power systems characterized by complex topologies require accurate situational awareness to maintain an adequate level of reliability. Since they are large and spread over wide geographical areas, occurrence of failures is inevitable in power systems. Various generation and transmission disturbances give rise to a mismatch between generation and demand, which manifest as frequency events. These events can take the form of negligible frequency deviations or more severe emergencies that can precipitate cascading outages, depending on the severity of the disturbance and efficacy of remedial action schema. The impacts of such events have become more critical with recent decline in …

Modeling And Analysing The Impact Of Heat Pump Water Heaters On Distribution Systems Using Gridlab-D, Midrar Adham

Dissertations and Theses

With the constant increase in energy demand, finding ways to reduce peak load and the energy-costs factors has become more imperative. Domestic water heating showcases a significant opportunity for such applications. Water heating is the second-highest energy consumer in the residential sector across the United States. Electric Water Heaters (EWHs), in particular, constitute nearly 43% of American household water heating energy consumption. Heat Pump Water Heater (HPWH), on the other hand, is an advanced water heating technology that has recently emerged in the United States residential market.

The objectives of this work are to develop a HPWH model and build …

A Privacy-Preserving Strategy For The Trust Layer Of The Energy Grid Of Things Distributed Energy Resource Management System, Mohammed Abdullah Alsaid

Dissertations and Theses

Emergent from the shadows of the traditional grid flaws, the Smart Grid (SG) idea was born and led by government mandates toward cleaner energy production. The SG represents the next generation of electricity distribution systems that subsume recent technological innovations. It uses digital communication between its components and entities to attain more automation, self-sufficiency, and reliability. Unfortunately, this relatively new concept is not flawless; the intrinsic reliance on increased digital communication spreads open attack paths for adversaries. Therefore, finding solutions that address information exchange vulnerabilities has become imperative.

The Energy Grid of Things (EGoT) is Portland State University's implementation of …

A Distributed Trust Model Simulator For Energy Grid Of Things Distributed Energy Resource Management System, Abdullah Barghouti

Dissertations and Theses

The evolution of networks into more distributed, self-reliant nodes has mitigated single-point failures that plagued traditional centralized networks. Applied to power grids, distributed systems can increase the integrity and availability of grid services while also offering a power management solution. However, while distributed networks provide scalability, security, and sustainability compared to centralized networks, their distributed nature makes them harder for anomaly detection and prevention. Incorporating a Distributed Trust Model (DTM) System into an Energy Grid of Things Distributed Energy Resource Management System (EGOT DERMS) allows grid participants to be characterized and their communication to be analyzed for possible attacks. A …

Proper Orthogonal Decomposition Of Reynolds And Dispersive Stresses In Turbulent Boundary Layers Over Multi-Scale Rough Patches, Catherine Virginia Spivey

Dissertations and Theses

Multi-scale rough patches are present in topologies such as urban canopies (cities) and natural landscapes (forests, ocean floors). The flow over such canopies is three-dimensional, with turbulent structures known as secondary flows present in the boundary layer due to the difference in rough surface heterogeneities. Three dimensional instantaneous velocities are analyzed within the roughness sublayer over three generations of multi-scale rough patches at nine vertical planes using particle image velocimetry obtained experimentally. The secondary structures present in the flow are identified in the form of Reynolds and dispersive fluctuations. Proper orthogonal decomposition is employed to characterize the imprint of the …

Development Of A Configurable Derms Test System In Gridapps-D, Sean James Keene

Dissertations and Theses

Distributed Energy Resources and their increased penetration within the power grid are a suitable method to provide essential reliability services. In order to do so, they must operate in aggregate. Aggregation of a wide variety of systems with varying standards and protocols is a complex task, which could benefit from rules and standards to support interoperability. To this end, the Portland State University Power Lab has developed the Energy Grid of Things project, which includes a Distributed Energy Resource Management System to provide aggregation and demonstrate the usage of an Energy Services Interface: a set of rules governing the interface …

Learning From Machines: Insights In Forest Transpiration Using Machine Learning Methods, Morgan Tholl

Dissertations and Theses

Machine learning has been used as a tool to model transpiration for individual sites, but few models are capable of generalizing to new locations without calibration to site data. Using the global SAPFLUXNET database, 95 tree sap flow data sites were grouped using three clustering strategies: by biome, by tree functional type, and through use of a k-means unsupervised clustering algorithm. Two supervised machine learning algorithms, a random forest algorithm and a neural network algorithm, were used to build machine learning models that predicted transpiration for each cluster. The performance and feature importance in each model were analyzed and compared …

Effectiveness Of Air Pollution Mitigation Systems: Transport, Transformation, And Control Of Ozone In The Indoor Environment, Pradeep Ramasubramanian

Dissertations and Theses

Buildings are critical environments governing our collective exposure to air pollution and energy consumption. While there exist concerns regarding increases in building energy consumption due to indoor air interventions, improvements to the quality of air indoors can improve health, comfort, and productivity. Air cleaning technologies that can improve indoor air quality with minimal energy consumption have become ever more important. These technologies are utilized at various scales; from passive removal of pollutants in the air entering the indoor environment to active cleaning of air within the breathing zone. To better understand the effectiveness of active and passive ozone mitigation technologies …

A Three-Dimensional, Analytical Wind Turbine Wake Model: Flow Acceleration, Empirical Correlations, And Continuity, Zein Ahmad Sadek

Dissertations and Theses

A new, three-dimensional, analytical, steady state wake model is presented which includes local flow acceleration near the rotor improving wake description compared to existing models. Wake structures such as the momentum deficit and regions of accelerated flow are concisely described with compound and normal Gaussian functions. Large-eddy simulations (LES) are used as training data to develop the model using two, inline turbines under various inflow conditions parameterized by hub height wind speed and turbulence intensity. Mass conservation is considered by fixing two components of the wake velocity model and optimizing the third to best satisfy continuity; after which, the model …

Methodologies For Quantum Circuit And Algorithm Design At Low And High Levels, Edison Tsai

Dissertations and Theses

Although the concept of quantum computing has existed for decades, the technology needed to successfully implement a quantum computing system has not yet reached the level of sophistication, reliability, and scalability necessary for commercial viability until very recently. Significant progress on this front was made in the past few years, with IBM planning to create a 1000-qubit chip by the end of 2023, and Google already claiming to have achieved quantum supremacy. Other major industry players such as Intel and Microsoft have also invested significant amounts of resources into quantum computing research.

Any viable computing system requires both hardware and …

Augmentative And Alternative Communication Use, Service Delivery Experiences, And Communicative Participation For People With Amyotrophic Lateral Sclerosis, Betts Peters

Dissertations and Theses

People with amyotrophic lateral sclerosis (ALS) often experience changes to their speech, and may use augmentative and alternative communication (AAC) devices and techniques to maintain the ability to communicate. The use of AAC may facilitate the participation of people with ALS in various life situations involving communication. There is limited data in the literature about the AAC approaches currently used by people with ALS, the professional services they receive to support communication, or the effects of AAC on their communicative participation. This dissertation involved a nationwide online survey of people with ALS, and comprises three papers intended to add to …

Observation And Control Of Photoemission And Electric Field Enhancement Of Plasmonic Antennas Through Photoemission Electron Microscopy, Christopher M. Scheffler

Dissertations and Theses

Photoemission electron microscopy (PEEM) is an imaging method which uses electrons excited through the photoelectric effect to characterize a sample surface with nanometer-level resolution. In PEEM, a high intensity laser excites electrons from the surface of the material and electron optics are used to form an image from the intensity and spatial distribution of the photoemission from the sample. The goal of this research was to study and maximize light confinement, which was accomplished using plasmonic nanostructures. Surface plasmons represent oscillations in the electron density of a material and can occur along the transition interface between a metal and a …

Developing An Energy Service Interface Specification, Jaime T. Kolln

Dissertations and Theses

Developing an Energy Service Interface (ESI) specification requires engaging a community of stakeholders including grid operators, Information and Communication Technology implementors, integrators, and finally standards bodies who will define an interface that respects and boundaries of ownership and roles of responsibility in order to activate millions of Distributed Energy Resources for the provision of grid services. By applying Interoperability Maturity Model Criteria and ESI principles to common grid-DER service use cases, the Grid Modernization Lab Consortium team will engage subject matter experts to develop a specification, with an eventual goal of informing development of ESI compliant profiles or standards. The …

An Investigation Into Magnetic Gears And Magnetic Springs For Marine Hydrokinetic Power Generators, Hossein Baninajar

Dissertations and Theses

Marine hydrokinetic generators often use mechanical gears to convert the low-speed motion into the high-speed rotary motion that is required for conventional electrical generators. While mechanical gearboxes have a high torque density and can reach high efficiencies, they suffer from serious reliability issues. Recently, magnetic gearing technology has been proposed as a means of making hydrokinetic generators more reliable. As magnetic gears use magnetic field modulation to create speed change, they offer a high reliability, nonfriction, power transmission mechanism that limits the wear to only the bearings and makes the magnetic gears almost maintenance-free. During an over-torque condition, a magnetic …

Mass Capacity Analysis Of Stormwater Control Measures Using Synthetic Stormwater With Silica, Organic And Hydrocarbon Constituents, Craig Michael Fairbaugh

Dissertations and Theses

Stormwater control measure (SCM) performance is well studied regarding solids removal; however, analysis of mass loading capacity, long-term performance, and maintenance demands are challenging due to the variability and multiple constituents inherent in urban stormwater. This research examines the long-term water quality performance and sediment mass capacity of two common SCMs: high rate biofiltration (HRBF) and conventional bioretention (BRT). Pollutant removal trials were conducted in a laboratory setting per the New Jersey Department of Environmental Protection (NJDEP) filtration protocol in two phases: the first using inorganic sediment per the NJDEP protocol, the second phase with the addition of organic sediment …

Seismic Performance Design Criteria Of Existing Bridge Bent Plastic Hinge Region And Rapid Repair Measures Of Earthquake Damaged Bridges Considering Future Resilience, A K M Golam Murtuz

Dissertations and Theses

The main objective of this research was to evaluate the seismic performance of existing sub-standard reinforced concrete (RC) bridge column-spread footing subassemblies and to quantify the material strain limits through a full-scale experimental program. A total of six column-footing test specimens with pre-1990 construction details were subjected to reverse cyclic lateral loading, utilizing a conventional three-cycle symmetric loading protocol and a protocol representing the demands expected from a CSZ earthquake. Additionally, the tests were designed so that variable axial loading could be applied to simulate the secondary load effects experienced during an earthquake in a column that is part of …

Robust Design Methodologies Under Performance Variations For More Than Moore Technologies: Cnfets & 3dics, Satya Keerthi Vendra

Dissertations and Theses

Various emerging technologies have shown great potential of supplementing silicon transistors as Moore's law slows down. One such disruptive technology, Carbon Nanotube Field Effect Transistors (CNFET), among others, promises increased speed and integration with reduced power consumption. However, due to a limited controllability over the Carbon Nano-tube(CNT) growth process, CNFETs show large variations in their performance and behavior. It is therefore difficult to predict and model their behavior while design suggestions are also challenging. CNT variations are important for a realistic delay modelling. Due to the presence of CNT-specific variations, conventional CMOS evaluation techniques cannot be used for CNFETs.

This …

Efficient Capture Of Co2 And Its Selective Reduction To Formic Acid Using Tin-Based Nanomaterials, Emmanuel Oluwaseun Abdul

Dissertations and Theses

CO₂ emissions from the combustion of fossil fuels and other anthropogenic sources have become the main contributing factors to global warming. Chemical methods of absorbing/capturing CO₂ from combustion flue gases have made it a sought-after approach in engineering emission solutions because of its simplistic and convenient operation and high absorption efficiency. The conversion of CO₂ into renewable fuels and high energy density chemicals by clean and economic processes has drawn scientists' attention over the decades. The electrocatalytic conversion of CO₂ using Sn-based materials has been demonstrated to be a promising method for producing formate, an important …

The Impact Of New Light Rail Service On Employment Growth In Portland, Oregon, Lahar Santra

Dissertations and Theses

This study quantitatively examines the impact of the new Light Rail Transit (LRT) service on employment growth in retail, knowledge, and service sectors before and after opening the LRT. At the corridor level, this study conducts a case study of Greenline in Southeast Portland, Oregon. The results of the corridor level study suggest that the new LRT service increased employment along the Greenline corridor among all the three sectors of interest- retail, knowledge, service in the long-term (ten years) while having slightly different results for the short-term (five years), likely due to the slow growth of LRT benefits. This study …

Materials And Methodologies For Spectroscopic And Optical Analytical Applications In Cultural Heritage Conservation Science, Lyndsay Nichole Kissell

Dissertations and Theses

The field of conservation science falls in the intersection of science and art. The work of conservation scientists may include any single subdiscipline of chemistry, though it is most commonly a highly interdisciplinary field taking skills from analytical, organic, and inorganic chemistry, as well as surface and materials science. The aims of conservation scientists are to answer questions about the production and aging of material cultural heritage. Knowing the materials used by an artist can lead to insight about the intentions of the object and knowing how those materials degrade will enable the use of preventative measures to ensure the …

Random Lasing In Nano-Crystalline Zinc-Oxide Films, Benito Reynaldo Resendiz

Dissertations and Theses

In this thesis, we explore the preparation of random lasers (RLs) using solution-deposited, randomly packed nano-particle films of zinc oxide (ZnO) impregnated with silicon dioxide (SiO₂) nanospheres. RLs have their scatterers randomly oriented, while their lasing comes from light propagating along closed paths through the scattering environment. It is shown here that random lasing is readily observed in films made of submicron sized ZnO particles. Adding transparent SiO₂ nanospheres to the films, we show there is an effective improvement of the lasing that is observable in all of the samples spectra. Specifically, we found that the lasing …

Development Of A Testing Station For Grid-Interactive Smart Inverter Systems, Yudong Lan

Dissertations and Theses

As renewable energy penetration increases within the electrical power grid, flexible power is required to ensure reliability. Reliability can be jeopardized by the fluctuation and non-dispatch ability of renewable generators. This instability is caused by an imbalance between the amount of power produced and the amount of power consumed. Grid-enabled battery inverter systems are considered a solution to offset voltage and frequency fluctuations, which arise due to this power imbalance.

The objective of this work is to develop a system for testing grid-enabled inverters. These inverters use one or more communication standards to control their interactions with the grid. This …