Open Access. Powered by Scholars. Published by Universities.®
- Discipline
-
- Civil and Environmental Engineering (788)
- Materials Science and Engineering (665)
- Chemical Engineering (656)
- Physical Sciences and Mathematics (462)
- Operations Research, Systems Engineering and Industrial Engineering (375)
-
- Industrial Engineering (372)
- Electrical and Computer Engineering (358)
- Operational Research (307)
- Civil Engineering (274)
- Construction Engineering and Management (274)
- Electrical and Electronics (264)
- Engineering Science and Materials (261)
- Computer Engineering (243)
- Computer Sciences (235)
- Social and Behavioral Sciences (217)
- Environmental Sciences (216)
- Environmental Studies (216)
- Environmental Engineering (161)
- Mechanical Engineering (102)
- Applied Mechanics (101)
- Engineering Mechanics (100)
- Petroleum Engineering (88)
- Power and Energy (86)
- Biomedical Engineering and Bioengineering (40)
- Polymer Science (40)
- Geological Engineering (39)
- Metallurgy (39)
- Mining Engineering (39)
- Risk Analysis (38)
- Keyword
-
- Microstructure (9)
- Chitosan (7)
- Rice husk ash (7)
- Mechanical properties (6)
- Hardness (5)
-
- Heat treatment (5)
- Coating (4)
- Oxidation (4)
- Sintering (4)
- Stainless steel (4)
- Adhesion (3)
- Fatigue (3)
- Glass-ceramics (3)
- Hydroxyapatite (3)
- Layer-by-layer (3)
- Polypropylene (3)
- Precipitation (3)
- Silica (3)
- Strain rate (3)
- X-ray diffraction (3)
- คลังสินค้า (3)
- AISI 4140 steel (2)
- Adsorption (2)
- And Nickel-Based Superalloy (2)
- Collagen (2)
- Cotton fabric (2)
- Cyclohexane (2)
- ECAP (2)
- EN AW 6082 aluminium alloy (2)
- Electrochemical technique (2)
- Publication Year
- Publication
- Publication Type
Articles 1 - 30 of 3414
Full-Text Articles in Engineering
Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana
Effects Of Ball Milling Duration And Sintering Temperature On Mechanical Alloying Fe3si, Varistha Chobpattana, Chakansin Phoomkong, Peerawat Nutnual, Kritsada Thaengthong, Wanchai Pijitrojana
Journal of Metals, Materials and Minerals
Fe3Si is under interest as a ferromagnetic electrode of magnetic tunneling junctions (MTJs). Its crystalline structure is important for achieving high device efficiency. This work focuses on mechanical alloying of 3:1 ratio of 99% pure Fe and Si powder mixtures by ball milling and sintering. The mixtures were ball-milled for various durations up to 20 h. Then, they were sintered from 400°C to 800°C for 4 h in Ar. SEM images and particle size analysis show significant reduction in average particle size of the mixtures after ball milling for 20 h. The longer duration of ball milling process promotes powder …
Unveiling Microplastic Removal And Characteristics In Wastewater From Two Municipal Wastewater Treatment Facilities In Indonesia, Nurul Setiadewi, Prayatni Soewondo, Cynthia Henny
Unveiling Microplastic Removal And Characteristics In Wastewater From Two Municipal Wastewater Treatment Facilities In Indonesia, Nurul Setiadewi, Prayatni Soewondo, Cynthia Henny
Applied Environmental Research
Wastewater treatment plants (WWTPs) are considered an entrance pathways for microplastic (MP) pollution in aquatic environments. This study reveals the removal and characteristics of MPs in wastewater from two municipal WWTPs in Indonesia. The influent contained 17.1 ± 5.65 particles L-1 (WWTP A) and 15.45 ± 4.31 particles L-1 (WWTP B), whereas the effluent contained 1.41 ± 0.01 and 1.5 ± 0.16 particles L-1. The removal efficiency was 91.75% for WWTP A and 90.32% for WWTP B, with no statistically significant difference (p > 0.05). WWTP A employed advanced treatment units, whereas WWTP B used a conventional pond-based system. MPs were …
Assessment Of The Influence Of Human Activities On The Occurrence Of Forest Fires In Thailand Via Multiple Linear Regression (Mlr), Sittipong Ruktamatakul, Jirarat Insuk, Benjaporn Pinwongpet, Sarisa Ruktametakul, Pornpis Yimprayoon
Assessment Of The Influence Of Human Activities On The Occurrence Of Forest Fires In Thailand Via Multiple Linear Regression (Mlr), Sittipong Ruktamatakul, Jirarat Insuk, Benjaporn Pinwongpet, Sarisa Ruktametakul, Pornpis Yimprayoon
Applied Environmental Research
Forest fires represent one of the most critical environmental challenges in Thailand, with impacts varying depending on forest type, fuel characteristics, terrain conditions, fire intensity, and the frequency of fire occurrence on the same landscape. While forest fires can contribute to ecosystem degradation, biodiversity loss, and the depletion of natural resources, such effects are not uniformly severe across all forest ecosystems. Understanding the human-induced factors contributing to forest fire occurrence is crucial for developing effective prevention strategies and promoting sustainable forest management. This study aimed to identify the anthropogenic factors influencing forest fire areas in Thailand via multiple linear regression …
Effect Of Chromium Doping On The Uv- And Sunlight-Driven Photocatalytic Performance Of Srtio3, Ro’Ikhatul Jannah, Dianisa Khoirum Sandi, Fahru Nurosyid, Risa Suryana, Didier Fasquelle, Yofentina Iriani
Effect Of Chromium Doping On The Uv- And Sunlight-Driven Photocatalytic Performance Of Srtio3, Ro’Ikhatul Jannah, Dianisa Khoirum Sandi, Fahru Nurosyid, Risa Suryana, Didier Fasquelle, Yofentina Iriani
Applied Environmental Research
Chromium (Cr)-doped strontium titanate (SrTiO3, STO) photocatalysts with compositions of SrTi1-xCrxO3 (x = 0, 5, and 10%) were prepared via the coprecipitation method. This study aimed to investigate the effects of Cr doping on structural, morphological, and optical properties. Furthermore, this work aimed to examine the photocatalytic performance of pure and Cr-doped STO against methylene blue (MB) degradation under ultraviolet (UV) and sunlight exposure. X-ray diffraction confirmed the formation of the cubic STO phase and the insertion of the Cr dopant in the STO structures. Furthermore, Cr doping reduced the lattice constant, crystallite size, and average particle size and narrowed …
A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin
A Review On Biomass-Derived Hard Carbon Anodes For Sodium-Ion Batteries : From Carbon Precursors To Storage Mechanisms, Anqi Lu, Jiaqian Qin
Journal of Metals, Materials and Minerals
The rapid development of sustainable energy technologies has intensified the demand for cost-effective and high-performance energy storage systems. Sodium-ion batteries (SIBs) are regarded as one of the most promising alternatives to lithium-ion batteries (LIBs) owing to their low cost, abundant sodium resources, and similar electrochemical mechanisms to LIBs. Hard carbon (HC) has attracted significant attention as the predominant anode material for SIBs due to its low cost, structural tunability, and availability from diverse precursors. Nevertheless, challenges remain, including the unclear Na+ storage mechanism, limited rate capability, and strong dependence on precursor type. This review systematically summarizes recent advances in HC …
Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr
Mechanical Properties And Crystallization Of Polybutylene Terephthalate Reinforced With Glass Flakes And Aluminum Powder, Nattakarn Hongsriphan, Pajaera Patanathabutr
Journal of Metals, Materials and Minerals
This research investigated mechanical properties and crystallization of poly(butylene terephthalate) composites by adding glass flakes (GF) and aluminum particles (Al). The concentration of the GF was 3 wt% or 5 wt%, and the Al was 0.5 wt% or 1.0 wt%. The stress-strain curves of the PBT-based composites showed yielding and necking. The PBT/GF/Al composites with GF/Al ratios of 3/0.5 wt/wt%, 3/1.0 wt/wt%, 5/0.5 wt/wt%, and 5/1.0 wt/wt% had Young’s moduli of 11.44%, 11.70%, 16.81%, and 19.31% higher than that of neat PBT, respectively. In the presence of Al at 1.0 wt%, the flexural modulus of the PBT/GF/Al composites increased to …
Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto
Synthesis, Structure, And Electrochemical Properties Of The Ni(Oh)2/Nimoo4 Composite On The Rgo/Nf Template For Hybrid Battery-Supercapacitor Electrodes, Retno Asih, Haniffudin Nurdiansah, Rogabe Sianipar, Ida Ayu Gayatri, Lukman Noerochim, Diah Susanti, Isao Watanabe, Darminto Darminto
Journal of Metals, Materials and Minerals
The growing demand for renewable and sustainable energy has intensified research on advanced energy-storage systems that can deliver both high energy and power densities. In this study, a Ni(OH)2/ NiMoO4 composite on a reduced graphene oxide/nickel foam (rGO/NF) template was synthesized through a hydrothermal and electrodeposition route to construct a hybrid battery-supercapacitor electrode. The unique hierarchical design combines the pseudocapacitive activity of Ni(OH)2/NiMoO4 with the excellent conductivity of rGO and the high surface area of NF, enabling efficient electron and ion transport. Structural and morphological analyses confirm the successful formation of the Ni(OH)2/NiMoO4/rGO/NF architecture. The electrode exhibits a specific capacitance …
Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant
Development Of Poly(Lactic Acid)/Ethylene-Propylene-Diene Monomer/Cellulose Composites Using Cellulose Extracted From Hemp Biomass For Plastic Packaging Applications, Supanicha Alapon, Natthanich Thongmee, Wikoramet Teeka, Pattara Somnuake, Sirirat Wacharawichanant
Journal of Metals, Materials and Minerals
Poly(lactic acid)/ethylene-propylene-diene monomer (EPDM)/cellulose composites using cellulose derived from hemp biomass (CHB) were investigated in this research. Morphology, chemical structures, functional groups, and crystallinity of CHB were characterized, observing a size of 135 ± 32 μm from SEM images with high purity and crystallinity from FT-IR and XRD spectroscopy. The optimized CHB was incorporated at 1 phr, 3 phr, and 5 phr into PLA/EPDM blends at 90/10 w/w. The polymer composites were prepared using an internal mixer, and samples were produced by compression molding for mechanical and thermal testing. The results indicated that the EPDM phase dispersed as droplets in …
Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka
Effects Of Gum Additives On Nickel Electroplating For Enhancing Steel Corrosion Resistance, Supitcha Supansomboon, Manatsawee Maneekan, Chanyanut Saenthaweesuk, Duangta Sitthichokcharoen, Natthapong Phinichka
Journal of Metals, Materials and Minerals
Low-carbon steels are widely used across various industries but have limited corrosion resistance, leading to safety hazards and a shortened service life. Nickel plating is a common method for enhancing steel corrosion resistance. The plating bath solution can be modified by adding additives to improve the properties of the coating. In this research, gum arabic, guar gum and gelatin were used as additives in a nickel electroplating bath. SS400 low-carbon steel, as a substrate, was plated with nickel from these different baths at 5 V for 25 min. Nickel coated with green additives showed higher hardness compared to those without …
Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana
Effect Of Cu Content On Microstructure, Morphology, And Antibacterial Properties Of Ti-Cu Alloy Thin Films, Chittra Kedkaew, Phalakorn Khwansungnoen, Tanattha Rattana
Journal of Metals, Materials and Minerals
Ti-Cu alloy thin films exhibit considerable potential for the development of advanced antibacterial surfaces, particularly for biomedical applications. In this research, Ti-Cu binary alloy thin films with a wide range of Cu content from 25.8 at% to 77.8 at% were deposited using magnetron co-sputtering with pure Ti and Cu as the targets. The composition of Cu in the films can be controlled by the applied power of Cu targets. This study investigated the effect of Cu content on the microstructural, morphological, and antibacterial properties using X-ray diffraction (XRD), Field emission scanning electron microscopy (FESEM), Atomic force microscopy (AFM), X-ray photoelectron …
Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri
Contributions Of Carbon Content And Cooling Rate On Phase Transformations And Mechanical Properties Of Sintered Fe-1.5cr-0.2mo-Xc Alloys, Mantana Yaruan, Wantana Koetniyom, Thanyaporn Yotkaew, Nattaya Tosangthum, Ruangdaj Tongsri
Journal of Metals, Materials and Minerals
Microstructural development in sintered Fe-1.5Cr-0.2Mo-xC alloys, produced under different cooling rates of 0.1℃∙s‒1 and 5.4℃∙s‒1, was investigated. It was found that, in slowly sintered Fe-1.5Cr-0.2Mo-xC alloys, the microstructure changed from hypoeutectoid to eutectoid and to hypereutectoid steel microstructural features with increasing carbon content. Under the fast-cooling rate of 5.4℃∙s‒1, the microstructural change with respect to the increase of carbon content involved the competition between the formation of ferrite + carbide mixture and that of martensite-austenite constituent. The increase of tensile strength of slowly cooled sintered Fe-1.5Cr-0.2Mo-xC alloys with increasing carbon content was attributed to …
Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich
Synergy Of Ground Granulated Blast-Furnace Slag And Limestone Powder In Ternary Cement: Effects On Heat Of Hydration And Strength Development, Pailyn Thongsanitgarn, Watcharapong Wongkeo, Thanongsak Nochaiya, Arnon Chaipanich
Journal of Metals, Materials and Minerals
This study explores the synergistic effect of ground granulated blast-furnace slag (GGBS) and limestone powder (LS) on the hydration behavior and mechanical performance of ternary cement systems. Calorimetry revealed that 30GGBS mix showed a significantly lower peak of about 2.3 mW∙g‒1 and a delayed response. In contrast, the incorporation of LS enhanced early hydration, with the 30LS mix reaching a peak of approximately 2.8 mW∙g‒1 around 6 h. Among ternary blends, 15GGBS–15LS exhibited the highest and earliest heat flow peak (about 2.55 mW∙g‒1 around 7.5 h), while 25GGBS–5LS showed a slower response (about 2.45 mW∙g‒1 around 9.5 h). Despite differences …
Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun
Effect Of Garnet Incorporation On The Functional Properties Of Sunscreens, Parinya Chakartnarodom, Kanyarat Munmani, Sureerat Polsilapa, Duangrudee Chaysuwan, Wichit Prakaypan, Passakorn Sonprasarn, Edward Laitila, Nuntaporn Kongkajun
Journal of Metals, Materials and Minerals
Garnet, a silicate mineral, was investigated as a replacement for the TiO2-based compound in sunscreen formulations. Samples containing garnet were evaluated for color shade, viscosity, sun protection factor (SPF), and water resistance. Substituting the TiO2-based compound with garnet reduced both viscosity and SPF but markedly enhanced water resistance. This improvement is attributed to the physical reinforcement provided by garnet particles, which strengthen the sunscreen film and reduce wash-off under water exposure. Garnet incorporation also altered the product’s appearance from white to a darker brownish-beige tone, improving visual compatibility with a wider range of skin tones.
Synthesis And Photoluminescence Properties Of Graphene Quantum Dots Prepared Via Carbonization Under Pressure Reduction, Sutthipoj Wongrerkdee, Pichitchai Pimpang
Synthesis And Photoluminescence Properties Of Graphene Quantum Dots Prepared Via Carbonization Under Pressure Reduction, Sutthipoj Wongrerkdee, Pichitchai Pimpang
Journal of Metals, Materials and Minerals
This study reports the synthesis of graphene quantum dots (GQDs) via a bottom-up carbonization approach using citric acid as a precursor under various reduced pressure conditions. The carbonization process was carried out at 250℃ in an ethanol medium, with atmospheric pressures ranging from normal to 20 inHg below atmospheric pressure. The effects of pressure reduction on the size and optical properties of GQDs were systematically investigated. Dynamic light scattering (DLS), UV–Vis spectroscopy, and fluorescence spectroscopy revealed that pressure reduction during synthesis decreased GQDs size and induced a blue-shift in both absorption and emission spectra. The optical bandgap of GQDs was …
Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee
Effects Of Welding Currents On Microstructure And Corrosion Behaviors Of Inconel 625 Cladding On 2.25cr-1mo Steel By Hot-Wire Tig, Supparat Saeheng, Hein Zaw Oo, Prapas Muangjunburee
Journal of Metals, Materials and Minerals
Hot-wire tungsten inert gas (HW-TIG) cladding has been applied to the steam turbine rotor welding repair. This study investigated the effects of welding currents on microstructure, hardness, and corrosion behavior. The experiments were conducted using four different welding currents applied to bead-on-plate Inconel 625 welds on a 2.25Cr-1Mo steel substrate as the steam turbine rotor material. The selected welding currents were 125 A, 150 A, 175 A, and 200 A. The percentages of weld dilution for different welding currents were also evaluated. Higher welding currents increased weld dilution, weld bead width, and HAZ size. As the welding current increased, the …
Development Of 4-Vinylbenzyl Chloride (Vbc) Grafted Onto Branched Polyethylenimine (Pei) Onto Bacterial Cellulose Sheet By Gamma-Induced Irradiation Technique For Cu Ion Adsorption, Methinee Wongwai, Supitchaya Kulratkitiwong, Thitirat Rattanawongwiboon, Sarute Ummartyotin
Development Of 4-Vinylbenzyl Chloride (Vbc) Grafted Onto Branched Polyethylenimine (Pei) Onto Bacterial Cellulose Sheet By Gamma-Induced Irradiation Technique For Cu Ion Adsorption, Methinee Wongwai, Supitchaya Kulratkitiwong, Thitirat Rattanawongwiboon, Sarute Ummartyotin
Journal of Metals, Materials and Minerals
Bacterial cellulose extracted and purified from Nata de coco was employed as a platform for Cu2+ ion adsorption. 4-vinylbenzyl chloride (VBC) was successfully grafted at the hydroxyl position by using gamma irradiation. The optimum was typically related to VBC concentration of 2% (v/v) and a radiation dose of 50 kGy. FTIR significantly reported the functional group of C-Cl related to VBC. No change of crystallinity and morphology was observed. The thermal decomposition was stable up to 200℃. The modification of branched polyethylenimine (PEI) was prepared in order to change the functionality to N‒H stretching. This was expected to adsorb Cu2+ …
High Temperature Storage Reliability Of Cu Pillar Flip Chip Interconnects, Kachain Worapakdee, Anusara Srisrual
High Temperature Storage Reliability Of Cu Pillar Flip Chip Interconnects, Kachain Worapakdee, Anusara Srisrual
Journal of Metals, Materials and Minerals
The Cu pillar flip chip is currently designed and used in the optic communication device that it has exhibited low reliability at high temperature. This paper aims to report the reliability of Cu pillar flip chip assembled on electronics board for a new optoelectronic product subjected to high temperature storage testing. The test was performed at 150℃ isothermal condition with the various storage times up to 2000 h. The aged samples were characterized with scanning acoustics microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Two types of intermetallic compounds (IMCs) were found at beside of the Cu pillar i.e. …
Degradation Of Wastewater By Advanced Oxidation Processes Using Green Synthesised Cuo Nanoparticles, Srinivasan Vishal, Anand Sarvesvaron, Muralidharan Keerthana, Hemanth Sanjay Reddy, A Babu Ponnusami
Degradation Of Wastewater By Advanced Oxidation Processes Using Green Synthesised Cuo Nanoparticles, Srinivasan Vishal, Anand Sarvesvaron, Muralidharan Keerthana, Hemanth Sanjay Reddy, A Babu Ponnusami
Journal of Metals, Materials and Minerals
This study highlights the green synthesis of CuO nanoparticles using coconut coir extract and evaluates their photocatalytic performance in the degradation of the Brown G dye. The CuO nano-particles were synthesised through sol-gel method, and the biomolecules like polyphenols, tannins and flavonoids acted as reducing agents to stabilise the nanoparticles. The characterisation of these nanoparticles was carried out through XRD, FTIR and FESEM methods. The nanoparticles were used to degrade the dye Brown G under UV irradiation. Response surface methodology was used to optimise the operating parameter with Box-Behnken design, which is the most suitable for varying 3 or more …
Dual-Functional Activated Carbon From Coffee Grounds For Crystal Violet Dye Removal And Subsequent Application As An Electrode Material In Energy Storage Devices, Sirikorn Khaophong, Tawatchai Kangkamano, Sonchai Intachai, Panita Kongsune
Dual-Functional Activated Carbon From Coffee Grounds For Crystal Violet Dye Removal And Subsequent Application As An Electrode Material In Energy Storage Devices, Sirikorn Khaophong, Tawatchai Kangkamano, Sonchai Intachai, Panita Kongsune
Journal of Metals, Materials and Minerals
The conversion of agricultural waste into high-value functional materials offers a sustainable strategy to address environmental concerns. In this study, activated carbon was synthesized from spent coffee grounds (CGAC) via KOH activation and used for crystal violet (CV) dye adsorption. Under optimal conditions (0.5 g dosage, 300 mg∙L‒1 CV, 30°C, 120 min), CGAC achieved 91.41% removal efficiency, with adsorption behavior fitting pseudo-second-order kinetics and the Freundlich isotherm. Thermo-dynamic parameters confirmed a spontaneous and endothermic process. Moreover, the reusability study revealed that CGAC maintained a high removal efficiency above 88% after seven adsorption–desorption cycles, demonstrating its structural stability and potential for …
Investigation On The Tribological Properties Of Al2o3-Tic Substrates In Fixed Abrasive Lapping For Data Storage Applications, Benjie Locsing Fernandez, Thanakrit Srisuwan, Duangamol Tungasmita, Sukkaneste Tungasmita
Investigation On The Tribological Properties Of Al2o3-Tic Substrates In Fixed Abrasive Lapping For Data Storage Applications, Benjie Locsing Fernandez, Thanakrit Srisuwan, Duangamol Tungasmita, Sukkaneste Tungasmita
Journal of Metals, Materials and Minerals
Alumina titanium-carbide (Al2O3-TiC) or simply AlTiC substrates were widely used in the magnetic recording industry for their superior mechanical and tribological properties. This study investigated the effect of AlTiC substrate crystal structure, chemical bonding and grain size in slider fix abrasive lapping tribology. Two types of AlTiC substrates, Type-A AlTiC and Type-B AlTiC equipped with an electro lapping guide (ELG), fully functional reader and writer devices were used in the study. The type-B lower material removal rate resulting to rougher surface finish was mainly due weakening caused by the titanium oxycarbide phase, which was the dominant factor, outweighing the minimal …
Surface Properties And In-Vitro Bioactivity Studies Of Tio2 Nanowire Doped Transition Metal (M=Fe, Co, And Mn), Misriyani Misriyani, Enayah Enayah, Z. Ryan Tian, Andi Meutiah Ilhamjaya
Surface Properties And In-Vitro Bioactivity Studies Of Tio2 Nanowire Doped Transition Metal (M=Fe, Co, And Mn), Misriyani Misriyani, Enayah Enayah, Z. Ryan Tian, Andi Meutiah Ilhamjaya
Journal of Metals, Materials and Minerals
This study investigates the influence of transition metal (Fe, Co, Mn) doping on the surface properties and in-vitro bioactivity of TiO2 nanowires. It aims to elucidate how transition-metal doping alters the surface behavior and biological response of TiO2 nanowires, enabling their potential use in biocompatible and magnetically responsive materials. Magnetic TiO2 nanowires doped with transition metals (Mx+/TiO2) were successfully prepared by a hydrothermal method using titanium dioxide in alkaline solution. Cations were added with Ti/Mx+ molar ratios of 5 to produce Fe/TNW, Co/TNW, and Mn/TNW. Characterization using SEM and XRD determine their surface properties. In-vitro bioactivity tests were conducted by …
Properties And Printability Of Polylactic Acid Films : An Effect Of Polyglutamate Coated Natto As A Bio-Plasticizer, Natrata Thitinardwong, Thira Chavarnakul, Kawee Srikulkit
Properties And Printability Of Polylactic Acid Films : An Effect Of Polyglutamate Coated Natto As A Bio-Plasticizer, Natrata Thitinardwong, Thira Chavarnakul, Kawee Srikulkit
Journal of Metals, Materials and Minerals
Polylactic acid (PLA) film, a biodegradable alternative to petroleum-based plastics, has gained significant attention for sustainable packaging applications. However, its limited screen-printability remains a barrier to broader commercial use. This study aims to enhance the screen-printability of PLA film by incorporating a polyglutamate coated natto (designated as Nat-M). PLA/Nat-M films having 1%, 3%, and 5% Nat-M were prepared and evaluated for their key performance indicators, including ink adhesion (ASTM D3359), tone reproduction accuracy, and printing resolution. The screen-printing resolution was optimized between 400 DPI and 500 DPI (dots per inch) to achieve optimal tone reproduction and edge sharpness. Additionally, ink …
A Top-Electrode-Based Liquid-Solid Triboelectric Nanogenerator For Energy Harvesting And Ethanol Detection, Subrat Bhol, Nakul Charan Sahu, Sunit Gaurav Mohanty, Vicky Raj Maddala, Basanta Kumar Panigrahi, Premkumar Bhosale
A Top-Electrode-Based Liquid-Solid Triboelectric Nanogenerator For Energy Harvesting And Ethanol Detection, Subrat Bhol, Nakul Charan Sahu, Sunit Gaurav Mohanty, Vicky Raj Maddala, Basanta Kumar Panigrahi, Premkumar Bhosale
Journal of Metals, Materials and Minerals
Liquid-solid triboelectric nanogenerators (LS-TENGs) offer a promising avenue for self-powered energy harvesting and sensing by exploiting contact electrification at fluid-dielectric interfaces, where droplet dynamics drive charge separation for electrical output without external power. In this work, a top-electrode LS-TENG was fabricated using a polytetrafluoroethylene (PTFE) film on a PMMA substrate with deionised water droplets, achieving an open-circuit voltage of ‒3.4 V, short-circuit current of 3.6 μA, and peak power of 1.48 nW at 100 MΩ under optimised conditions of 2 cm drop height, 45° tilt, and 50 μL volume. Performance scaled with droplet kinetics and volume due to enhanced contact …
Land Use And Land Cover Simulation Via Integrated Modelling With Gis Techniques For Sustainable Land Utilization Development In The Northeast Khong Subwatershed Of Thailand, ฺBanchongsak Faksomboon, Thipphaphone Keoviyavong
Land Use And Land Cover Simulation Via Integrated Modelling With Gis Techniques For Sustainable Land Utilization Development In The Northeast Khong Subwatershed Of Thailand, ฺBanchongsak Faksomboon, Thipphaphone Keoviyavong
Applied Environmental Research
Land utilization is an important indicator of socioeconomic and environmental changes caused by both natural and man-made factors. Land use and land cover (LULC) simulation is a critical tool for monitoring and predicting LULC and is essential for sustainable development, land resource management and planning. The cellular automata (CA) Markov model is the basis for the current study’s prediction of LULC changes in the Northeast Khong Sub Watershed (NKSW). Landsat data from 2013 to 2023 were used to investigate LULC classification and determine the spatiotemporal distributions of LULC. In addition, LULC data from 2013 and 2023 were used to generate …
Reduction Of Cr(Vi) With Infrared Light And Chemical Adsorption Of Cr(Iii) By A God-Crown/Bentonite Composite For Electroplating Waste Remediation, Andre Taufik Kurniawan, Muhammad Djoni Bustan, Sri Haryati
Reduction Of Cr(Vi) With Infrared Light And Chemical Adsorption Of Cr(Iii) By A God-Crown/Bentonite Composite For Electroplating Waste Remediation, Andre Taufik Kurniawan, Muhammad Djoni Bustan, Sri Haryati
Applied Environmental Research
Heavy metal pollution, particularly chromium (Cr) from electroplating industrial waste, has severely threatened environmental quality and human health. This study aims to develop a composite adsorbent material based on bentonite and god crown biomass capable of removing chromium ions from liquid waste through a combination of reduction and adsorption mechanisms. The god crown/bentonite (GC/Bt) composite was synthesized at a mass ratio of 2:1 and calcined at 900°C. FTIR characterization revealed active functional groups (–OH, C=O, Si–O, and Al–O–Si), whereas BET analysis revealed a mesoporous structure (surface area 31.12 m2 g-1, pore diameter 4.37 nm) suitable for ion diffusion. The reduction …
Fabrication Of Urea With Amorphous Silica To Increase Rice Growth In Saline Soils, Thi Ha Chi Nguyen, Thi Hang Thuc Ha, Minh Phuong Nguyen, Ngoc Chuc Pham, Quang Bac Nguyen, Nguyen Huy Tuan Do, Ngoc Nhiem Dao, Trung Kien Nguyen
Fabrication Of Urea With Amorphous Silica To Increase Rice Growth In Saline Soils, Thi Ha Chi Nguyen, Thi Hang Thuc Ha, Minh Phuong Nguyen, Ngoc Chuc Pham, Quang Bac Nguyen, Nguyen Huy Tuan Do, Ngoc Nhiem Dao, Trung Kien Nguyen
Applied Environmental Research
In recent decades, the decrease in rice cultivation areas in Vietnam, particularly in the Mekong River Delta, caused by climate change and soil salinization, has posed serious challenges for sustainable development. In addition to irrigation and agronomic practices, fertilizers that sustain rice growth under saline conditions play a crucial role in improving crop productivity. Amorphous silica has been reported to increase plant tolerance to drought, salinity, and heavy metal stress. In this study, nanosilica-coated urea (UCS) fertilizers were synthesized by coating urea granules with 1–5 wt% amorphous silica. The products were characterized by SEM, XRD, FTIR, TG‒DSC, and EDX to …
Heavy Metals And Organic Carbon In Sediments Of Seagrass Sediments Of Trang Province, Thailand, Siriporn Pradit, Pornthep Wirachwong, Thongchai Nitiratsuwan, Sujaree Bureekul, Supraewpan Lohalaksanadech, Thawanrat Kobkeatthawin, Monticha Jirajaras, Prakrit Noppradit, Sanya Sirivithayapakorn
Heavy Metals And Organic Carbon In Sediments Of Seagrass Sediments Of Trang Province, Thailand, Siriporn Pradit, Pornthep Wirachwong, Thongchai Nitiratsuwan, Sujaree Bureekul, Supraewpan Lohalaksanadech, Thawanrat Kobkeatthawin, Monticha Jirajaras, Prakrit Noppradit, Sanya Sirivithayapakorn
Applied Environmental Research
In this study, the accumulation of heavy metals (Cd, Cr, Cu, Fe, and Pb) in water, suspended sediments, sediments, and seagrass in Kalase Bay, Trang Province, Thailand, during the 2024 dry season was investigated. These findings indicate that the enrichment factor (EF) for all the metals was less than 1, suggesting that anthropogenic contamination is not a significant concern in the area. The translocation factor (TF) values were less than 1 for all the metals except Cu, whose TF was greater than 1; however, these values were not statistically significant, indicating limited phytoextraction capacity. The bioconcentration factor (BCF) values for …
Spatial Modeling Of Natural Disaster Risk By Integrating Hazard, Vulnerability, And Exposure Factors Using Geospatial Techniques : Evidence From Mueang Tak District, Thailand, Suphatphong Ruthamnong
Spatial Modeling Of Natural Disaster Risk By Integrating Hazard, Vulnerability, And Exposure Factors Using Geospatial Techniques : Evidence From Mueang Tak District, Thailand, Suphatphong Ruthamnong
Applied Environmental Research
This study presents a comprehensive multihazard risk assessment for Mueang Tak District, Thailand, that integrates hazard, vulnerability, and exposure (H-V-E) dimensions. By utilizing geographic information systems (GIS) and remote sensing, the analytic hierarchy process (AHP) was employed to prioritize critical risk factors. GIS analysis integrated multisource spatial data, including Landsat 9 and Sentinel-2 imagery, CHIRPS precipitation, and SRTM-derived topography, while AHP weights were established on the basis of expert judgment and socioeconomic indices such as the relative wealth index (RWI) and population statistics. The results delineate distinct spatial risk clusters: high landslide potential is concentrated in the steep terrain of …
Carbon Stock Assessment In Sonneratia Apetala Afforested Mangroves : A Case Study From Cox’S Bazar, Bangladesh, Mohammad Ismail, Sayed Abu Johany, Tanmoy Dey, Zakia Sultana Teasa, Trishna Das, Prabal Barua, Tonima Hossain, Sajib Ahmed
Carbon Stock Assessment In Sonneratia Apetala Afforested Mangroves : A Case Study From Cox’S Bazar, Bangladesh, Mohammad Ismail, Sayed Abu Johany, Tanmoy Dey, Zakia Sultana Teasa, Trishna Das, Prabal Barua, Tonima Hossain, Sajib Ahmed
Applied Environmental Research
Sonneratia apetala is a key species for mangrove afforestation projects in Bangladesh and plays a crucial role in ecosystem restoration and carbon sequestration. The research on how the total carbon stock (TCS) varies across S. apetala plantations in Cox’s Bazar remains limited. Thus, in this study, the biomass and soil carbon stock were quantified across nine S. apetala afforested sites in Cox’s Bazar to assess spatial variation and influencing factors. The total biomass carbon (TBC) was calculated by summing the aboveground (AGBC) and belowground (BGBC) biomass carbon, while the soil organic carbon stock (SOCS) was determined from the 0–40 cm …
Seasonal Wastewater Monitoring And Quantitative Microbial Risk Assessment Of Escherichia Coli In A University Wastewater System, Pathum Thani, Central Thailand, Natsima Tokhun, Natagarn Tongphanpharn, Weerawat Ounsaneha, Montip Jankeaw, Wiriyabhorn Klomsungcharoen, Patsara Wongsudi, Yawanart Ngamnon, Cheerawit Rattanapan, Kwang Mo Yang
Seasonal Wastewater Monitoring And Quantitative Microbial Risk Assessment Of Escherichia Coli In A University Wastewater System, Pathum Thani, Central Thailand, Natsima Tokhun, Natagarn Tongphanpharn, Weerawat Ounsaneha, Montip Jankeaw, Wiriyabhorn Klomsungcharoen, Patsara Wongsudi, Yawanart Ngamnon, Cheerawit Rattanapan, Kwang Mo Yang
Applied Environmental Research
In this study, the physicochemical properties of wastewater were characterized, and a quantitative microbial risk assessment (QMRA) of E. coli was conducted in the wastewater treatment system of the Faculty of Science and Technology, Valaya Alongkorn Rajabhat University, under the Royal Patronage, Pathum Thani, Thailand (VRU-SciTech). This study was conducted because the current water-quality assessment does not include the QMRA or evaluate the occupa-tional and incidental public risk of infection. Over a one-year monitoring period, this study quantified wastewater generation (~6.09 L person-1 day-1; ~3.21 × 103 m3 year-1) and analyzed its physicochemical parameters and E. coli concentrations. High concentrations …