Engineering Commons^™

Quantitative Assessment And Characterization Of Tool Wear Phenomena In Advanced Manufacturing Processes, Oybek Valijonovich Tuyboyov

Technical science and innovation

This paper explores the quantitative assessment and characterization of tool wear phenomena in advanced manufacturing processes, employing a multifaceted approach encompassing traditional measurements, image processing, machine learning, and predictive modeling. The study emphasizes the intricate dynamics of tool wear and its direct impact on cutting tool performance, addressing challenges in real-time monitoring and optimization of machining operations. Traditional methods like VBmax measurement are juxtaposed with advanced techniques such as the improved conditional generative adversarial net with a high-quality optimization algorithm (CGAN-HQOA), efficient channel attention destruction and construction learning (ECADCL), and shape descriptors based on contour, moments, orientations, and texture. Artificial …

Uncovering And Mitigating Spurious Features In Domain Generalization, Saeed Karimi, Hamdi̇ Di̇bekli̇oğlu

Turkish Journal of Electrical Engineering and Computer Sciences

Domain generalization (DG) techniques strive to attain the ability to generalize to an unfamiliar target domain solely based on training data originating from the source domains. Despite the increasing attention given to learning from multiple training domains through the application of various forms of invariance across those domains, the enhancements observed in comparison to ERM are nearly insignificant under specified evaluation rules. In this paper, we demonstrate that the disentanglement of spurious and invariant features is a challenging task in conventional training since ERM simply minimizes the loss and does not exploit invariance among domains. To address this issue, we …

Enhancing Water Safety: Exploring Recent Technological Approaches For Drowning Detection, Salman Jalalifar, Andrew Belford, Eila Erfani, Amir Razmjou, Rouzbeh Abbassi, Masoud Mohseni-Dargah, Mohsen Asadnia

Research outputs 2022 to 2026

Drowning poses a significant threat, resulting in unexpected injuries and fatalities. To promote water sports activities, it is crucial to develop surveillance systems that enhance safety around pools and waterways. This paper presents an overview of recent advancements in drowning detection, with a specific focus on image processing and sensor-based methods. Furthermore, the potential of artificial intelligence (AI), machine learning algorithms (MLAs), and robotics technology in this field is explored. The review examines the technological challenges, benefits, and drawbacks associated with these approaches. The findings reveal that image processing and sensor-based technologies are the most effective approaches for drowning detection …

Detection Of Myofascial Trigger Points With Ultrasound Imaging And Machine Learning, Benjamin Formby

All Theses

Myofascial Pain Syndrome (MPS) is a common chronic muscle pain disorder that affects a large portion of the global population, seen in 85-93% of patients in specialty pain clinics [10]. MPS is characterized by hard, palpable nodules caused by a stiffened taut band of muscle fibers. These nodules are referred to as Myofascial Trigger Points (MTrPs) and can be classified by two states: active MTrPs (A-MTrPs) and latent MtrPs (L-MTrPs). Treatment for MPS involves massage therapy, acupuncture, and injections or painkillers. Given the subjectivity of patient pain quantification, MPS can often lead to mistreatment or drug misuse. A deterministic way …

A Uav Target Tracking And Control Algorithm Based On Siamrpn, Songming Jiao, Hui Ding, Yufei Zhong, Xin Yao, Jiahao Jiahao Zheng

Journal of System Simulation

Aiming at the requirement of autonomously tracking land moving targets of rotary-wing UAVs, an autonomous and stable UAV tracking and control system that can adapt to the common interference environments such as scale changes, occlusions, and attitude changes is constructed.The system extracts the imaging position of the target in airborne camera through the twin network based on deep learning, and obtains the relative pose of the target. The image processing algorithm is designed to process the icons in the tracking frame, and the yaw angle of UAV relative to the tracking target is obtained, Kalman filter is introduced to …

High-Throughput Phenotyping Of Plant Leaf Morphological, Physiological, And Biochemical Traits On Multiple Scales Using Optical Sensing, Huichun Zhang, Lu Wang, Xiuliang Jin, Liming Bian, Yufeng Ge

Department of Biological Systems Engineering: Papers and Publications

Acquisition of plant phenotypic information facilitates plant breeding, sheds light on gene action, and can be applied to optimize the quality of agricultural and forestry products. Because leaves often show the fastest responses to external environmental stimuli, leaf phenotypic traits are indicators of plant growth, health, and stress levels. Combination of new imaging sensors, image processing, and data analytics permits measurement over the full life span of plants at high temporal resolution and at several organizational levels from organs to individual plants to field populations of plants. We review the optical sensors and associated data analytics used for measuring morphological, …

Stream Processor Development Using Multi-Threshold Null Convention Logic Asynchronous Design Methodology, Wassim Khalil

Graduate Theses and Dissertations

Decreasing transistor feature size has led to an increase in the number of transistors in integrated circuits (IC), allowing for the implementation of more complex logic. However, such logic also requires more complex clock tree synthesis (CTS) to avoid timing violations as the clock must reach many more gates over larger areas. Thus, timing analysis requires significantly more computing power and designer involvement than in the past. For these reasons, IC designers have been pushed to nix conventional synchronous (SYNC) architecture and explore novel methodologies such as asynchronous, self-timed architecture. This dissertation evaluates the nominal active energy, voltage-scaled active energy, …

Application Of Image Processing In Soil Mechanics, Luke Knodel

Senior Honors Theses

Whenever someone digs a hole in the ground or takes a relaxing walk on the beach, they directly interact with the soil. In its basic form, soil consists of solid, water, and air phases. Unlike water and metals, soil is a particulate media, and the relative proportion of the individual phases significantly influences its physical properties. Various studies have analyzed soil using image processing to determine its morphological properties. Research involving the digital processing of X-ray Computed Tomography (X-ray CT) images of soil to retrieve physically meaningful information is gaining recognition. This study investigates two-dimensional X-ray CT images of unsaturated …

Sharprazor: Automatic Removal Of Hair And Ruler Marks From Dermoscopy Images, Reda Kasmi, Jason Hagerty, Reagan Harris Young, Norsang Lama, Januka Nepal, Jessica Miinch, William V. Stoecker, R. Joe Stanley

Mechanical and Aerospace Engineering Faculty Research & Creative Works

Background: The removal of hair and ruler marks is critical in handcrafted image analysis of dermoscopic skin lesions. No other dermoscopic artifacts cause more problems in segmentation and structure detection. Purpose: The aim of the work is to detect both white and black hair, artifacts and finally inpaint correctly the image. Method: We introduce a new algorithm: SharpRazor, to detect hair and ruler marks and remove them from the image. Our multiple-filter approach detects hairs of varying widths within varying backgrounds, while avoiding detection of vessels and bubbles. The proposed algorithm utilizes grayscale plane modification, hair enhancement, segmentation using tri-directional …

Advances And Applications Of Dsmt For Information Fusion. Collected Works, Volume 5, Florentin Smarandache, Jean Dezert, Albena Tchamova

Branch Mathematics and Statistics Faculty and Staff Publications

This fifth volume on Advances and Applications of DSmT for Information Fusion collects theoretical and applied contributions of researchers working in different fields of applications and in mathematics, and is available in open-access. The collected contributions of this volume have either been published or presented after disseminating the fourth volume in 2015 (available at fs.unm.edu/DSmT-book4.pdf or www.onera.fr/sites/default/files/297/2015-DSmT-Book4.pdf) in international conferences, seminars, workshops and journals, or they are new. The contributions of each part of this volume are chronologically ordered.

First Part of this book presents some theoretical advances on DSmT, dealing mainly with modified Proportional Conflict Redistribution Rules (PCR) of …

Data-Driven Deep Learning-Based Analysis On Thz Imaging, Haoyan Liu

Graduate Theses and Dissertations

Breast cancer affects about 12.5% of women population in the United States. Surgical operations are often needed post diagnosis. Breast conserving surgery can help remove malignant tumors while maximizing the remaining healthy tissues. Due to lacking effective real-time tumor analysis tools and a unified operation standard, re-excision rate could be higher than 30% among breast conserving surgery patients. This results in significant physical, physiological, and financial burdens to those patients. This work designs deep learning-based segmentation algorithms that detect tissue type in excised tissues using pulsed THz technology. This work evaluates the algorithms for tissue type classification task among freshly …

Canopycam – An Edge-Computing Sensing Unit For Continuous Measurement Of Canopy Cover Percentage Of Dry Edible Beans, Wei-Zhen Liang, Joseph Oboamah, Xin Qiao, Yufeng Ge, Robert M. Harveson, Daran Rudnick, Jun Wang, Haishun Yang, Angie Gradiz

Department of Biological Systems Engineering: Papers and Publications

Canopy cover (CC) is an important indicator for crop development. Currently, CC can be estimated indirectly by measuring leaf area index (LAI) using commercially available hand-held meters. However, it does not capture the dynamics of CC. Continuous CC monitoring is essential for dry edible beans production since it can affect crop water use, weed, and disease control. It also helps growers to closely monitor “yellowness”, or senescence of dry beans to decide proper irrigation cutoff timing to allow the crop to dry down for harvest. Therefore, the goal of this study was to develop a device – CanopyCAM, containing software …

Crack Control And Bond Performance Of Alternative Coated Reinforcements In Concrete, Sachin Sreedhara

All Dissertations

Concrete cracking in structures is a ubiquitous problem which can lead to the deterioration of the structure. Other than affecting the strength aspect of a structure, cracking impacts the serviceability criteria as well. Although cracking phenomenon in any structure is highly inevitable, it has to be minimized in order to maintain a structure’s life effectively. Cracking in reinforced concrete structures is related to the bond strength developed between the bar and the concrete. It also depends on an ability of the bar to resist the stresses due to shrinkage to minimize the crack. Another important aspect is the resistance offered …

Development An Edge-Computing Sensing Unit For Continuous Measurement Of Canopy Cover Percentage Of Dry Edible Beans, Wei-Zhen Liang, Joseph Oboamah, Xin Qiao, Yufeng Ge, Robert M. Harveson, Daran R. Rudnick, Jun Wang, Haishun Yang, Angie Gradiz

Department of Biological Systems Engineering: Papers and Publications

Canopy cover (CC) is an important indicator for crop development. Currently, CC can be estimated indirectly by measuring leaf area index (LAI), using commercially available hand-held meters. However, it does not capture the dynamics of CC. Continuous CC monitoring is essential for dry edible beans production since it can affect crop water use, weed, and disease control. It also helps growers to closely monitor “yellowness”, or senescence of dry beans to decide proper irrigation cutoff to allow the crop to dry down for harvest. The goal of this study was to develop a device – CanopyCAM, containing software and hardware …

The Dark Annulus Of A Drop In A Hele-Shaw Cell Is Caused By The Refraction Of Light Through Its Meniscus, Sangjin Ryu, Haipeng Zhang, Carson Emeigh

Department of Mechanical and Materials Engineering: Faculty Publications

Knowing the meniscus shape of confined drops is important for understanding how they make first contact and then coalesce. When imaged from the top view by brightfield microscopy, a liquid drop (e.g., corn syrup) confined in a Hele-Shaw cell, surrounded by immiscible liquid (e.g., mineral oil), had a dark annulus, and the width of the annulus decreased with increasing concentration of corn syrup. Since the difference in the annulus width was presumed to be related to the meniscus shape of the drops, three-dimensional images of the drops with different concentrations were obtained using confocal fluorescence microscopy, and their cross-sectional meniscus …

Improving The Performance And Evaluation Of Computer-Assisted Semen Analysis, Ji-Won Choi

Dissertations

Semen analysis is performed routinely in fertility clinics to analyze the quality of semen and sperm cells of male patients. The analysis is typically performed by trained technicians or by Computer-Assisted Semen Analysis (CASA) systems. Manual semen analysis performed by technicians is subjective, time-consuming, and laborious, and yet most fertility clinics perform semen analysis in this manner. CASA systems, which are designed to perform the same tasks automatically, have a considerable market share, yet many studies still express concerns about their accuracy and consistency. In this dissertation, the focus is on detection, tracking, and classification of sperm cells in semen …

Research On Visual Inspection Algorithm Of Crimping Appearance Defects For Wiring Harness Terminals, Bingan Yuan, Mingen Zhong, Jingxin Ni

Journal of System Simulation

Abstract: Aiming at the low efficiency and high missing rate of wiring harness terminals, an image detection method based on machine vision is proposed. The characteristic parameters of five typical defects in three main parts of wiring harness terminals are analyzed and defined. Tthe algorithms of extracting positioning datum, segmenting inspected-parts adaptively, extracting the defect features and calculating the characteristic parameters are designed respectively, and the defects criterions are given. The experimental results show that the algorithms are suitable for single defect and multi-class defects, both the miss detection rate and the false positiveness rate are low. The accuracy and …

Investigating 3d-Printability Of A Maine-Based Bio-Ink, Jordyn Judkins

Honors College

Biofabrication is the process of creating complex biologic products, such as artificial tissues, from raw materials such as living cells, biomaterials, and molecules. This can be done using 3D printed bio-ink, which is a combination of biomaterials and cells. However, the bio-ink must be a shear thinning fluid to allow for high-resolution and continuous printing, but also demonstrate post-printing mechanical integrity to self- support the structure, which is challenging to achieve. The research conducted here investigates how to improve the mechanical functionality of bio-ink using additives available in Maine. Chitosan, sodium alginate, and TEMPO nano fibrillated cellulose were chosen as …

Image Provenance Analysis, Daniel Moreira, William Theisen, Walter Scheirer, Aparna Bharati, Joel Brogan, Anderson Rocha

Computer Science: Faculty Publications and Other Works

The literature of multimedia forensics is mainly dedicated to the analysis of single assets (such as sole image or video files), aiming at individually assessing their authenticity. Different from this, image provenance analysis is devoted to the joint examination of multiple assets, intending to ascertain their history of edits, by evaluating pairwise relationships. Each relationship, thus, expresses the probability of one asset giving rise to the other, through either global or local operations, such as data compression, resizing, color-space modifications, content blurring, and content splicing. The principled combination of these relationships unveils the provenance of the assets, also constituting an …

Novel Damage Index-Based Rapid Evaluation Of Civil Infrastructure Subsurface Defects Using Thermography Analytics, Tianjie Zhang, Md Asif Rahman, Alex Peterson, Yang Lu

Civil Engineering Faculty Publications and Presentations

The qualitative measurement is a common practice in infrastructure condition inspection when using Infrared Thermography (IRT), as it can effectively locate the defected area non-destructively and non-contact. However, a quantitative evaluation becomes more significant because it can help decision makers figure out specific compensation plans to deal with defects. In this work, an IRT-based novel damage index, damage density, was proposed to quantify the significance of subsurface defects. This index is extracted from IR images using our thermography analytics framework. The proposed framework includes thermal image processing, defect edge detection, and thermal gradient map calculations. A modified root mean square …

Printed Circuit Board Defect Detection Using Image Processing, Nandeera Kamalaja De Silva Munaweera Tanthirige

All Graduate Theses, Dissertations, and Other Capstone Projects

This study was conducted to verify the hypothesis of the possibility to design an Automated Defect Detection system at a budget using image processing software. Focusing mainly on simplicity of integration with the capability to inspect a high variation of PCB with less user input. Reference comparison method was utilized to construct the defect detection algorithm where a defect free reference PCB gets compared with an inspection image to identify defects and anomalies. The paper discusses the range of possible defects for inspection on non-assembled PCBs, suggests methods for image processing and presents a final inspection algorithm, including their testing. …

Reference-Free Differential Histogram-Correlative Detection Of Steganography: Performance Analysis, Natiq M. Abdali, Zahir M. Hussain

Research outputs 2022 to 2026

Recent research has demonstrated the effectiveness of utilizing neural networks for detect tampering in images. However, because accessing a database is complex, which is needed in the classification process to detect tampering, reference-free steganalysis attracted attention. In recent work, an approach for least significant bit (LSB) steganalysis has been presented based on analyzing the derivatives of the histogram correlation. In this paper, we further examine this strategy for other steganographic methods. Detecting image tampering in the spatial domain, such as image steganography. It is found that the above approach could be applied successfully to other kinds of steganography with different …

Tooth Position Determination By Automatic Cutting And Marking Of Dental Panoramic X-Ray Film In Medical Image Processing, Yen-Cheng Huang, Chiung-An Chen, Tsung-Yi Chen, He-Sheng Chou, Wei-Chi Lin, Tzu-Chien Li, Jia-Jun Yuan, Szu-Yin Lin, Chun-Wei Li, Shih-Lun Chen, Yi-Cheng Mao, Patricia Angela R. Abu, Wei-Yuan Chiang, Wen-Shen Lo

Department of Information Systems & Computer Science Faculty Publications

This paper presents a novel method for automatic segmentation of dental X-ray images into single tooth sections and for placing every segmented tooth onto a precise corresponding position table. Moreover, the proposed method automatically determines the tooth’s position in a panoramic X-ray film. The image-processing step incorporates a variety of image-enhancement techniques, including sharpening, histogram equalization, and flat-field correction. Moreover, image processing was implemented iteratively to achieve higher pixel value contrast between the teeth and cavity. The next image-enhancement step is aimed at detecting the teeth cavity and involves determining the segment and points separating the upper and lower jaw, …

Cost Oriented Image Processing For Mobile Robots, Luan Mulaku, Peter Kopacek, Fatmir Azemi, Fevzi Osmani

UBT International Conference

Mechatronic is used in a lot of activities, and our study intends to add supplementary components making the system more intelligent. A mobile robot which follows the path while avoiding obstacles and using the implementation of image processing on real worldThe economic aspect has become a major part of the investment in technology and needs to be taken into account. Project was of low cost, and there will be no impacts for not implementing this project in the future, considering little equipment added. Hoping the results of this work will be taken into consideration for further generations of mobile robots …

Active Fluids: Rheological Properties And Response To Light Of Suspensions Of Synechocystis Sp. Cpcc 534, Zahra Habibi

Electronic Thesis and Dissertation Repository

Despite our current understanding of active fluid mechanics, more knowledge is required to fully understand their rheological properties, response to light, and details of the interactions between cells in diluted suspensions.

The focus of this thesis is on investigating the rheological properties of suspensions of cyanobacterium Synechocystis sp. CPCC 534 under shear, induced by stirring. Experiments were conducted at different stirring rates and results are compared with the stationary condition. A notable increase in growth and biomass of Synechocystis sp. under various shear conditions was observed and the yield was nearly doubled. Besides, the data showed Newtonian behavior for suspensions …

Implementation Of An Improved Image Enhancement Algorithm On Fpga, Prit Ghanshyambhai Patel

Electronic Theses and Dissertations

Image processing plays very crucial role in this digital human world and has rapidly evolved with the development of computers, mathematics and the real-life demand of variety of applications in wide range of areas. This wide range of areas includes remote sensing, machine/ robot vision, pattern recognition, medical diagnosis, video processing, military, agriculture, television, etc. Image processing has two important components which are image enhancement and information extraction. Since image enhancement works at the front end with the initial raw inputs, it works like a backbone in image processing. When it comes to implementing these image enhancement techniques and developing …

Characterization Of Tea (Camellia Sinensis) Granules For Quality Grading Using Computer Vision System, Md Towfiqur Rahman, Sabiha Ferdous, Mariya Sultana Jenin, Tanjina Rahman Mim, Masud Alam, Muhammad Rashed Al Mamun

Department of Biological Systems Engineering: Papers and Publications

Tea (Camellia sinensis) has been found as an important medicinal beverage for human which is consumed all over the world. Primarily, the majority of tea is being cultivated in Asia and Africa, however it is commercially produced by more than 60 countries. Though substantial amount is produced, its processing system is still underdeveloped which leads to decrease in export opportunity as well as low monetary value. Moreover, the traditional method of tea grading and sorting is laborious, inefficient, and costly which ultimately produces the low-quality heterogeneous products. Processing and grading of tea granules after drying is very important …

Efficient, Low-Cost Bridge Cracking Detection And Quantification Using Deep-Learning And Uav Images, Chao Sun, Xiangyu Meng, Joshua O. Ogbebor, Shaopan Guo

Publications

Many bridges in the State of Louisiana and the United States are working under serious degradation conditions where cracks on bridges threaten structural integrity and public security. To ensure structural integrity and public security, it is required that bridges in the US be inspected and rated every two years. Currently, this biannual assessment is largely implemented using manual visual inspection methods, which is slow and costly. In addition, it is challenging for workers to detect cracks in regions that are hard to reach, e.g., the top part of the bridge tower, cables, mid-span of the bridge girders, and decks. This …

New Methods In Wavelet Analysis For Applications Of The Wavelet Transform, Jeffrey D. Williams

Theses and Dissertations

A commonality in the many applications and domains where signal processing (SP)is applied is the detection of events. Detection in SP requires the identification of the occurrence of an event, within a signal, and distinguishing the occurrence from no event. In a classical application of SP, seismologists seek to detect abnormalities in an electromagnetic (EM) signal to detect or not detect the occurrence of an earthquake, represented as an anomalous EM pulse. Since many signals are noisy, such as those produced by a seismograph, it can be challenging to distinguish a significant EM pulse from incident noise. In SP, smoothing …

Contact Angle Measurement Using A Hele-Shaw Cell: A Proof-Of-Concept Study, Haipeng Zhang, Jacob Gottberg, Sangjin Ryu

Department of Mechanical and Materials Engineering: Faculty Publications

Contact angle is an important property to quantify the wettability of a solid surface with a liquid, which characterizes interactions of the solid-liquid pair. Generally, to measure contact angle, special instruments such as a goniometer are necessary, but they are not readily available in certain research settings. In this study, an alternative method to measure contact angle based on a Hele-Shaw cell, microscopy imaging, and image processing is suggested. In this method, a liquid drop is injected into a transparent Hele-Shaw cell, the meniscus of the drop is captured in the top or bottom view using a brightfield microscope, and …