Engineering Commons^™

Hybrid Electric Vehicles - A Review, Marothu Polaram Saichand Mr., Lakshman Rao S. Paragond Dr., Bindu S Dr., Athulya Jyothi V Ms.

Manipal Journal of Science and Technology

A hybrid vehicle was first patented by William H Patton in 1889. With the development of technology, hybrid electric vehicles are now stepping up to contribute to reducing fossil fuel dependency. This ultimately contributes to climate change. Hybrid vehicles, due to their advanced technology allow flexibility in choosing any of the available fuel choices. A hybrid electric vehicle (HEV) is a kind of hybrid vehicle which combines an internal combustion engine (ICE) system with electricity for propulsion (also known as a hybrid vehicle drivetrain). This is to achieve more efficient and cheaper fuel consumption with better performance. There are various …

A One-Dimensional Analysis Of A Microbial Fuel Cell For Efficient Acetate Removal And Power Density Output, David Rouhani

UNLV Theses, Dissertations, Professional Papers, and Capstones

Microbial fuel cells (MFCs) are electrochemical devices that utilize microorganisms to convert organic matter into electrical energy. MFCs have been discussed to have potential application for sustainable wastewater treatment due to their ability to generate electricity while simultaneously treating contaminated water. To optimize MFC performance, numerical models can be used to understand the complex electrochemical and biological processes occurring in the system. In this study, a numerical model was developed to simulate the performance of MFCs under varying operating conditions and to investigate the performance of a MFC for treating wastewater fuel. More specifically, the MFC was modeled to oxidize …

Physics-Based And Behavioral Models For Fuel Cells, Charles Chima Anyim

Theses and Dissertations

In recent times there has been renewed interest in fuel cells for electricity production, especially for transportation applications. Fuel cells are attractive because the electricity production process from chemical energy does not cause pollution, and no carbon emissions occur. In this work, we will focus on Proton Exchange Membrane (PEM) fuel cells that use hydrogen and oxygen to generate electricity, producing only electricity, heat and water. If hydrogen can be produced in a green, non-polluting way, fuel cells can truly be an environmentally benign energy source.

In this work, we will look at the modeling of a fuel cell system. …

Super–Protonic Conductors For Solid Acid Fuel Cells (Safcs): A Review, Sh. Afroze, Md S. Reza, M.R. Somalu, A.K. Azad

Eurasian Journal of Physics and Functional Materials

Fuel cell holds the promise of being environmentally friendly and becomes one of the alternatives for renewable energy. Solid acids have super–protonic behavior which allows them to become conductors. It can function at high temperatures. Hydration, on the other hand, may be used to improve the performance of the solid acid. Moreover, the conductivity, stability, and crystal structure of the solid acid compounds of the fuel cell are all influenced by the size of the electrolyte membrane. Very few works have been done on solid acid fuel cells which are still under investigation to make it one viable as well …

Thermodynamic Modeling Of Hydrogen–Water Systems With Gas Impurity At Various Conditions Using Cubic And Pc-Saft Equations Of State, Amer Alanazi, Saleh Bawazeer, Muhammad Ali, Alireza Keshavarz, Hussein Hoteit

Research outputs 2022 to 2026

Hydrogen (H2) has emerged as a viable solution for energy storage of renewable sources, supplying off-seasonal demand. Hydrogen contamination due to undesired mixing with other fluids during operations is a significant problem. Water contamination is a regular occurrence; therefore, an accurate prediction of H2-water thermodynamics is crucial for the design of efficient storage and water removal processes. In thermodynamic modeling, the Peng–Robinson (PR) and Soave Redlich–Kwong (SRK) equations of state (EoSs) are widely applied. However, both EoSs fail to predict the vapor-liquid equilibrium (VLE) accurately for H2-blend mixtures with or without fine-tuning binary interaction parameters due to the polarity of …

Highly Active And Stable Low-Pgm And Pgm-Free Catalysts For Anion Exchange Membrane Fuel Cells, Horie Adabi Firouzjaie

Theses and Dissertations

Anion exchange membrane fuel cells (AEMFCs) have recently seen significant growth in interest as their achievable current density, peak power density, and longevity have been dramatically improved. Though these advances in performance have been important for demonstrating the feasibility of the technology, nearly all AEMFCs reported in the literature have required a relatively high loading of platinum group metal (PGM)- based catalysts at both the anode and cathode electrodes. However, to take command of the low-temperature fuel cell market, AEMFCs cannot simply reach the same performance as incumbent proton exchange membrane fuel cells (PEMFCs), which have had decades of development …

Quantifying And Elucidating The Effect Of Co2 On Aemfcs, Yiwei Zheng

Theses and Dissertations

Anion exchange membrane fuel cells (AEMFCs) have recently received significant attention as a future high efficiency, environmentally friendly energy conversion device. This attention is due to the potential advantages that AEMFCs can offer compared the much more common, and commercialized, proton exchange membrane fuel cells (PEMFCs) – most notably lower cost. However, there are several remaining roadblocks for the AEMFC technology to be widely adopted, such as: i) the stability of the anion exchange membranes (AEMs) and anion exchange ionomer (AEIs); ii) the development of highly active catalysts with either low platinum group metal (PGM) loading or catalysts that are …

Pd-Based Electrocatalysts For Oxygen Reduction And Ethanol Oxidation Reactions: Some Recent Insights Into Structures And Mechanisms, Zhi-Peng Wu, Chuan-Jian Zhong

Journal of Electrochemistry

The development of efficient electrocatalysts for applications in fuel cells, including proton-exchange membrane fuel cell (PEMFC) and direct ethanol fuel cell (DEFC), has attracted extensive research attention in recent years. Oxygen reduction reaction and ethanol oxidation reaction are two of the key reactions where the design of active, stable and low-cost electrocatalysts is critical for the mass commercializations of PEMFCs and DEFCs. This challenge stems largely from the limited understanding of the catalyst structures and reaction mechanisms. Progress has been made in investigations of electrocatalysts derived from Pd-based alloy nanomaterials both experimentally and computationally. We highlight herein some of the …

Application Of Atomically Precise Metal Nanoclusters In Electrocatalysis, Zhi-Hua Zhuang, Wei Chen

Journal of Electrochemistry

Metal nanoclusters (M NCs) consist of only several to a few hundred of metal atoms and possess core sizes less than 2 nm. Owing to the quantum size effect, the electronic states of M NCs evolve to discrete levels similar to the molecule energy gaps, other than a continuous density of states to produce plasmon characteristic of bulk metal nanoparticles (M NPs). In comparison with the conventional M NPs, M NCs exhibit dramatically unique electronic and optical properties, such as molecule-like energy gaps, strong photoluminescence and high catalytic properties, which make them promising for potential application in numerous fields, such …

Editors’ Choice-Examining Performance And Durability Of Anion Exchange Membrane Fuel Cells With Novel Spirocyclic Anion Exchange Membranes, Ami C. Yang-Neyerlin, Samantha Medina, Kelly M. Meek, Derek J. Strasser, Cheng He, Daniel M. Knauss, Mustain E William, Svitlana Pylypenko, Bryan S. Pivovar

Faculty Publications

A series of spirocyclic copolymer membranes with varying ion exchange capacities (IECs) were investigated to probe the impact of polymer properties on in situ fuel cell performance and stability. In-situ electrochemical tests and post-mortem electron microscopy analysis of cross-sectioned membrane electrode assemblies (MEAs) have been combined with voltage loss breakdown analysis to evaluate the performance and degradation of different MEAs, and to probe the catalyst morphology and electrode structure at different stages of operation. Voltage loss breakdown results show that membrane degradation and kinetic losses played only a minor role in observed performance degradation and that performance losses were primarily …

Synthesis And Characterization Of Non-Pgm Catalysts For Fuel Cell Applications, Sudharsan Sridhar

Masters Theses

Fuel Cells convert the chemical energy of a fuel and an oxidizing agent into electricity through a pair of redox reactions. Proton Exchange Membrane (PEM) fuel cells convert (efficiency-60%) hydrogen and air to power the electric motors with zero emissions, facilitating the development of environmentally friendly and sustainable automobile technologies. One of the major obstacles for larger commercial viability of Fuel Cells for automobile applications is their cost-effectiveness. Currently, fuel cells use platinum as a catalyst material, which is prohibitively expensive for commercial automobile applications. The development of non-Platinum Group Metal (non-PGM) catalyst materials with similar electrochemical performance to that …

Survey Of Dc-Dc Non-Isolated Topologies For Unidirectional Power Flow In Fuel Cell Vehicles, Mahajan Sagar Bhaskar, Vigna K. Ramachandaramurthy, Sanjeevikumar Padmanaban, Frede Blaabjerg, Dan M. Ionel, Massimo Mitolo, Dhafer Almakhles

Power and Energy Institute of Kentucky Faculty Publications

The automobile companies are focusing on recent technologies such as growing Hydrogen (H2) and Fuel Cell (FC) Vehicular Power Train (VPT) to improve the Tank-To-Wheel (TTW) efficiency. Benefits, the lower cost, `Eco' friendly, zero-emission and high-power capacity, etc. In the power train of fuel cell vehicles, the DC-DC power converters play a vital role to boost the fuel cell stack voltage. Hence, satisfy the demand of the motor and transmission in the vehicles. Several DC-DC converter topologies have proposed for various vehicular applications like fuel cell, battery, and renewable energy fed hybrid vehicles etc. Most cases, the DC-DC power converters …

Modeling And Control Of Thermal System Of Fuel Cells For Locomotive, Guo Ai, Weirong Chen, Li Qi, Zhixiang Liu, Yankun Li

Journal of System Simulation

Abstract: Temperature in the stack plays an important role in ensuring efficient and reliable operations for proton exchange membrane fuel cells driving locomotive which is a new field in railway development. The thermal model of fuel cells for locomotive was built including the stack, bypass, radiator and their resistance to coolant. The control objective that the temperature at inlet of the stack maintained at a setting temperature with the temperature difference between the stack less 10^oC was accomplished by adjusting the air flow rate through the radiator and the coolant flow rate through the pump; and the …

Nanomechanical Characterization Of Fuel Cell Ionomers, Jackson Goddard

UCARE Research Products

Energy sustainability can be achieved by improving and adopting clean energy technologies, and a better nanoscale understanding of ionomer-catalyst layers could lead to increased efficiency of proton exchange membrane fuel cells. Samples of Nafion ( Perfluorosulfonic acid ionomer) and PFIA (Perfluoroimide acid ionomer) of varying film thickness were prepared and then studied using contact resonance force microscopy. It was determined that storage and loss modulus increase as relative humidity increases and ionomer film thickness goes below 100 nm. Furthermore, in this specific study, the similar storage and loss modulus of Nafion and PFIA could be attributed to similar backbone structure …

Effect Of The Electrodeposition Potential Of Platinum On The Catalytic Activity Of A Pt/Gc Catalyst Toward Formic Acid Electro−Oxidation, Islam M. Al-Akraa, Bilquis A. Al-Qodami Ms., Ahmad M. Mohammad Prof

Chemical Engineering

The electrocatalytic activity of platinum (Pt)–modified glassy carbon (GC) (referred as Pt/GC) electrodes toward the formic acid electro−oxidation (FAO) was investigated. The Pt deposition on the GC substrate was carried out by a potentiostatic technique at different potentials (from 0.2 V to −0.2 V vs. Hg/Hg2Cl2/KCl (sat.) reference electrode) and the corresponding influence on the catalytic activity toward FAO was monitored. The electrocatalytic inspection revealed a potential role for the Pt deposition potential in boosting the catalytic efficiency of the catalyst toward FAO and further in mitigating the CO poisoning that eventually deactivate the catalyst. Interestingly, the highest activity toward …

Bridging The Gap Between Automated Manufacturing Of Fuel Cell Components And Robotic Assembly Of Fuel Cell Stacks, Devin C. Fowler, Vladimir Gurau, Daniel Cox

Department of Manufacturing Engineering Faculty Research and Publications

Recently demonstrated robotic assembling technologies for fuel cell stacks used fuel cell components manually pre-arranged in stacks (presenters). Identifying the original orientation of fuel cell components and loading them in presenters for a subsequent automated assembly process is a difficult, repetitive work cycle which if done manually, deceives the advantages offered by either the automated fabrication technologies for fuel cell components or by the robotic assembly processes. We present for the first time a robotic technology which enables the integration of automated fabrication processes for fuel cell components with a robotic assembly process of fuel cell stacks into a fully …

High-Throughput 3d Reconstruction Of Stochastic Heterogeneous Microstructures In Energy Storage Materials, Yanxiang Zhang, Mufu Yan, Yanhong Wan, Zhenjun Jiao, Yu Chen, Fanglin Chen, Changrong Xia, Meng Ni

Faculty Publications

Stochastic heterogeneous microstructures are widely applied in structural and functional materials, playing a crucial role in determining their performance. X-ray tomography and focused ion beam serial sectioning are frequently used methods to reconstruct three-dimensional (3D) microstructures, yet are demanding techniques and are resolution-limited. Here, a high-throughput multi-stage 3D reconstruction method via distance correlation functions is developed using a single representatively large-sized 2D micrograph for stochastic microstructures, and verified by X-ray micro-tomography datasets of isotropic and anisotropic solid oxide fuel cell electrodes. This method provides an economic, easy-to-use and high-throughput approach for reconstructing stochastic heterogeneous microstructures for energy conversion and storage …

A Promising Modification Of Pt Surfaces With Cnts For Decreasing Poisoning Impact In Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Aya A. Khalifa Ms.

Chemical Engineering

Direct methanol fuel cells (DMFCs) are clean energy sources that have many applications due to the high energy density of methanol as a fuel. However, this type of fuel cells (FCs) has limitations that are preventing it from being commercialized. One such limitation is the adsorption of intermediates such as CO into the surface of the Platinum (Pt) catalyst during methanol oxidation (MO) which deactivates its active sites, where the reaction is taking place, and leads to poisoning of the electrode over the long term. In this study, multi-walled carbon nanotubes (MWCNTs) have been introduced to the Pt-modified glassy carbon …

Design And Manipulation Of A Power-Generating System With High-Temperature Fuel Cells For Hypersonic Applications, Jack Randolph Chalker

Browse all Theses and Dissertations

Current hypersonic vehicles tend to be incapable of producing onboard power with traditional generators due to their use of supersonic combusting ramjets (scramjets). Because of this, they seek additional energy sources for supporting advanced electronics or other auxiliary power-dependent devices while requiring elaborate thermal management systems to combat temperatures exceeding 700ºC. The incorporation of Solid Oxide Fuel Cell (SOFCs) stacks is an efficient solution, capable of generating large quantities of power through the use of natural fuel sources at high temperatures. Developments in this thesis include the design, construction, and support of a system operating at hypersonic-environment conditions with a …

Enhanced Electro-Oxidation Of Methanol At Pt-Au Nanocatalyst For Direct Methanol Fuel Cells, Islam M. Al-Akraa Dr., Yaser M. Asal Mr, Ahmad M. Mohammad Prof

Chemical Engineering

In this investigation, a Pt-Au nanocatalyst prepared by the coelectrodeposition of Pt (PtNPs) and Au (AuNPs) nanoparticles is assembled onto a glassy carbon (GC) electrode for efficient methanol oxidation (MO). Several molar ratios between PtNPs and AuNPs have been used and the corresponding catalytic activity towards MO is tracked. The Pt1:Au1 catalyst showed the highest catalytic activity (5 times higher oxidation peak current (Ip) and a 126 mV negative shift in the onset potential (Eonset) toward MO). The catalyst’s morphology, composition and activity are investigated and the ehancement mechanism is recognized.

Recent Progress In Pt-Based Catalysts For Oxygen Reduction Reaction, Jing Li, Xin Feng, Zi-Dong Wei

Journal of Electrochemistry

One major challenge for a large-scale commercialization of the proton-exchange membrane fuel cells (PEMFCs) technologies that enable a shift to ‘zero-emission’ personal transportation, is the expensive and unstable Pt catalysts, which are mainly used to catalyze the sluggish kinetics of the oxygen reduction reaction (ORR) occurred on the air electrode of PEMFCs. Many research works have targets to improve the stability of Pt-based catalysts and to construct Pt/transitional metal alloys with low Pt loading amount. Herein, we provide a minireview for the Pt-based ORR catalysts based on our recent work, which covers a brief background introduction, the stability improvement of …

Morphological Control Of Ptcu2 Octahedron And Oxygen Reduction Electrocatalytic Performance Of Ptcu For Fuel Cell, Long-Sheng Cao, Lei Wan, Zhi-Gang Shao, Hong-Mei Yu, Ming Hou, Bao-Lian Yi

Journal of Electrochemistry

Platinum acetylacetonate (Pt(acac)₂) and copper acetylacetonate (Cu(acac)₂) were co-reduced to prepare PtCu₂ octahedron alloy catalyst in N,N-dimethylformamiade by solvothermal method. The PtCu₂ showed lattice compression, and high ratio of non-oxidized Pt with high electronic binding energy. All those structural features contributed to weak adsorption strength of oxygen species on Pt and lower d-band centre position. The influence of structure-directing agent on morphology of PtCu alloy was systematically studied. In the half cell test, as a result of the uniform morphology and regular octahedron of PtCu₂ formed, the mass activity and area specific activity …

Palladium Adatoms On Gold Nanoparticles As Electrocatalysts For Ethanol Electro-Oxidation In Alkaline Solutions, Hui-Mei Chen, Shang-Qian Zhu, Jia-Le Huang, Min-Hua Shao

Journal of Electrochemistry

Palladium (Pd) is a good catalyst for ethanol electro-oxidation in alkaline solutions. The activity of Pd is further improved in this study by modifying the gold (Au) nanoparticles with Pd adatoms using a simple spontaneous deposition process. The Pd overlayer on the Au core (Au@Pd) is un-uniform with some Au atoms exposed to the electrolyte. The activity of Au@Pd/C toward ethanol oxidation reaction (EOR) is much higher than that of Pd/C in an alkaline solution. The peak current density of Au@Pd/C is 4.6 times higher than that of Pd/C with a 100 mV lower onset potential. The enhanced activity may …

Preparation Of Nanoprobes And Their Possible Applications In Nanoscale Scanning Electrochemical Microscopy For Studying Electrocatalytic Oxygen And Hydrogen Reactions, Xing-Xing Chen

Journal of Electrochemistry

Scanning electrochemical microscopy (SECM) is a type of scanning probe microscopy, which can not only provide the topographical information, but also offer the electrochemical properties of different samples. The interrelationship of physical and electrochemical properties of a sample can be searched at a high-resolution scale due to the introduction of ultramicroelectrode (UME). With the continuous development of modern nanotechnology, the SECM probe has been improved with drastically decreasing its size down to nanometer. Meanwhile, to evaluate and understand the electrochemical performance of various electrocatalysts for both oxygen and hydrogen reactions with high-efficiency is highly demanded in the research area of …

Recent Progress For Fe-N-C Electrocatalysts In Alkaline Fuel Cells, Xin Deng, Heng-Quan Chen, Ye Hu, Qing-Gang He

Journal of Electrochemistry

Fuel cells are highly recommended nowadays due to their intrinsic advantages such as high energy conversion efficiency, nearly no pollution, and convenient operation. With the development of anion exchange membrane, alkaline fuel cells have gone through a renaissance thanks to their superiorities such as faster reaction kinetics, wider choices for both fuels and electrocatalysts. It is essential to find an appropriate electrocatalyst for oxygen reduction reaction (ORR) to improve the performance of alkaline fuel cells. Further commercialization of the widely used Pt-based materials has suffered from disadvantages such as scarcity and high cost. As alternatives to largely investigated Pt-based materials, …

Non-Precious Metal Catalysts For Oxygen Reduction Reaction In Alkaline Solutions, Zhewen Yin

USF Tampa Graduate Theses and Dissertations

Mesoporous WO3 powders were prepared via sol-gel processing synthesis using nonionic surfactant Pluronic (P-123) as the template. The influences of heating temperature on the pore structure and properties of WO3 powders were investigated. Three kinds of modifications were compared and evaluated after finding out the best heating condition. Different amount of lanthanum was doped into mesoporous WO3 to improve its Oxygen Reduction Reaction (ORR) activity. Several factors contributing to the increase of catalytic performance were discussed. Vulcan carbon powder was also used as a support to increase the catalysts’ electrical conductivity as well as dispersity. The component, microstructure and specific …

Optimal Control And Design Of Functionality To Improve Efficiency And Lifetime Of Proton Exchange Membrane Fuel Cell, Maftuna Eshkobilova, Uktam Salomov, Maksudbek Baydjanov

Acta of Turin Polytechnic University in Tashkent

This work is devoted to identify operating conditions to maximize the life of power supply, meet the required power output and improve fuel consumption efficiency. We devise a framework for designing fuel cell power supplies for field sensor networks, which have important applications in environmental monitoring, wildlife preservation, in disaster monitoring and in border security. The high efficiency, low emission and zero noise pollution features of fuel cells have made them a promising clean power source. Especially, proton exchange membrane fuel cells are promising alternative to conventional fossil fuel system, because they are clean, quiet and operate high efficiencies. However, …

Fabrication Of Cuox-Pd Nanocatalyst Supported On A Glassy Carbon Electrode For Enhanced Formic Acid Electro-Oxidation, Islam M. Al-Akraa Dr., Ahmad M. Mohammad Prof, Mohamed S. El-Deab Prof, Bahgat E. El-Anadouli Prof

Chemical Engineering

Formic acid (FA) electro-oxidation (FAO) was investigated at a binary catalyst composed of palladium nanoparticles (PdNPs) and copper oxide nanowires (CuOxNWs) and assembled onto a glassy carbon (GC) electrode. /e deposition sequence of PdNPs and CuOxNWs was properly adjusted in such a way that could improve the electrocatalytic activity and stability of the electrode toward FAO. Several techniques including cyclic voltammetry, chronoamperometry, field-emission scanning electron microscopy, energy dispersive X-ray spectroscopy, and X-ray diffraction were all combined to report the catalyst’s activity and to evaluate its morphology, composition, and structure. /e highest catalytic activity and stability were obtained at the CuOx/Pd/GC …

Proton Transfer In Molten Lithium Carbonate: Mechanism And Kinetics By Density Functional Theory Calculations, Xueling Lei, Kevin Huang, Changyong Qin

Faculty Publications

Using static and dynamic density functional theory (DFT) methods with a cluster model of [(Li2CO3)8H]+, the mechanism and kinetics of proton transfer in lithium molten carbonate (MC) were investigated. The migration of proton prefers an inter-carbonate pathway with an energy barrier of 8.0 kcal/mol at the B3LYP/6-31 G(d,p) level, which is in good agreement with the value of 7.6 kcal/mol and 7.5 kcal/mol from experiment and FPMD simulation, respectively. At transition state (TS), a linkage of O–H–O involving O 2p and H 1 s orbitals is formed between two carbonate ions. The calculated trajectory of H indicates that proton has …

Innovative Electrode Nanocomposites For Energy Storage And Conversion Systems, Yiran Wang

Doctoral Dissertations

Nanocomposites emerged as suitable alternatives for electrode materials, are defined as “two or more materials with different properties remain separate and distinct on a macroscopic level within one unity and with any dimension in any phase less than 100 nm”. Recently, polymer/carbon based nanocomposites have attracted significant research interests for energy applications due to their multi-functionalities, improved structure stability and ease of production. This dissertation work focusing on the development of innovative electrode nanocomposites for proton exchange membrane fuel cell, supercapacitor and electrochromic applications.

Chapter 1 is an introduction. Chapter 2 & 3 focus on the synthesis of Pd-based nanocatalysts …