Engineering Commons^™

Spray-Dried Cellulose Nanofibril-Reinforced Polypropylene Composites For Extrusion-Based Additive Manufacturing, Lu Wang

Electronic Theses and Dissertations

Compared to conventional manufacturing process, additive manufacturing (AM) offers free-form design, lighter and more ergonomic products, short lead time and less waste. Extrusion-based AM can be used to print thermoplastics. However, extrusion-based AM has processing challenges in printing semi-crystalline thermoplastics, for instance, polypropylene (PP). Cellulose nanofibrils (CNF) are one type of cellulose nanofibers that are produced from pulp fibers. CNF has extraordinary properties which make it an ideal candidate to reinforce polymers. Spray-dried CNF (SDCNF) is able to be incorporated into thermoplastic matrices without modifying conventional processing procedures.

The mechanical properties of 3D printed plastic parts have been considered significantly …

Modeling Of A Head - Neck Assembly Drop Tower Impact Test Using Abaqus, Hussein Sharqi Owaid

Electronic Theses and Dissertations

There are numerous potential causes of traumatic brain injury (TBI) and concussions, including traffic accidents, contact during sports and falls. Protection from these injuries is paramount because of the problems that result from TBI, such as loss of thinking and memory capability. Head impact from falls, especially in elderly, can also result in severe to fatal injury and some effects of brain injury are often not visible. For these reasons and more a need exists for protective head gear that can keep persons safe during at risk physical activity and that can protect fall prone persons from accidental injuries. Part …

Production Of Bio-Oil With Different Oxygen Content And Characterization Of Catalytic Upgrading To Transportation Fuel, Mubarak Mohammed Khlewee

Electronic Theses and Dissertations

The world’s increasing population requires an increase in transportation fuel production. The lack of production of transportation fuels due to the shortage of fossil fuel resources combined with concerns about global emissions of carbon dioxide from fossil fuel combustion are the two major issues that have driven researchers to actively pursue alternative sources for oil production. Biomass is being considered as an alternative feedstock to produce fuel and chemicals due to its abundance and renewability. It has many features that make it suitable as a source of transportation fuel production. However, the bio-oil produced by the fast pyrolysis process has …

Dynamic Modeling And Extreme Tension Analysis Of Mooring System For A Floating Offshore Wind Turbine, Wei Ting Hsu

Electronic Theses and Dissertations

For offshore wind industry, exploiting the dynamic behaviors of mooring lines is of increasing importance in floating offshore wind turbine (FOWT) mooring system design. Currently, the design philosophy for structures and moorings is based on principles and practices adopted in offshore oil and gas, including mooring systems that are optimized for applications in deeper waters. However, the design of FOWT mooring systems is facing several challenges, including installation costs, the stability of light-weight minimalistic platforms, and shallow water depths (50-300m). The extreme tension in mooring lines of a light displacement platform in shallow water is dominated by snap loads. Hence …

Cellulose Nanofiber-Reinforced Impact Modified Polypropylene: Assessing Material Properties From Fused Layer Modeling And Injection Molding Processing, Jordan Elliott Sanders

Electronic Theses and Dissertations

The purpose of this research was to investigate the use of cellulose nanofibers (CNF) compounded into an impact modified polypropylene (IMPP) matrix. A IMPP was used because it shrinks less than a PP homopolymer during FLM processing. An assessment of material properties from fused layer modeling (FLM), an additive manufacturing (AM) method, and injection molding (IM) was conducted. Results showed that material property measurements in neat PP were statistically similar between IM and FLM for density, strain at yield and flexural stiffness. Additionally, PP plus the coupling agent maleic anhydride (MA) showed statistically similar results in comparison of IM and …

Operational Limits Of Blade Coating With High Aspect Ratio Pigments, Lisa Weeks

Electronic Theses and Dissertations

During the blade coating of paper, operational issues such as stalagmite formation, scratches or spits can develop at high solids content and high web speeds. For coatings that contain high aspect ratio pigments, these difficulties appear at lower solids concentrations and slower machine speeds than with more spherical shaped pigments. These operational issues are important because plate shaped particles have good properties in publication and barrier grades. A number of possible mechanisms have been described in the literature, but a clear cause has not been established nor have methods to estimate the operational limits been proposed.

The influence of particle …

Nawic Focus (December 2017), National Association Of Women In Construction - Maine Chapter Staff

Maine Women's Publications - All

No abstract provided.

Minerva 2017, The Honors College

Minerva

This issue of Minerva includes a feature on Honors College research collaboratives; an article on Honors students studying abroad in Singapore and Chile; an article reflecting upon the 15-year anniversary of the Honors College and the importance of mentorship; and articles on Honors students Isaiah Mansour and Aliya Uteova.

Implantation Of Nanocellulose In The Zebrafish Model, Hanna J. Anderson

Honors College

The number of novel materials for use in biomedical implantation is expanding rapidly, increasing the success rates of implant procedures. Nanocellulose is being assessed as a sustainable and biocompatible material, offering an alternative to conventional polymer or metal designs with the appropriate structure for potential tissue integration. In this research, the capacity of cellulose nanofibers to serve as biomedical implants is assessed through examination of immune responses of transgenic zebrafish, utilizing bright field and confocal fluorescence microscopy. Methods for creating microincisions for the implantation of dense cellulose nanofiber shards in the zebrafish model were explored, and a surgical protocol was …

Water Chemistry Dynamics In Four Vernal Pools In Maine, Usa, Lydia H. Kifner

Electronic Theses and Dissertations

Vernal pools are small seasonal wetlands that are a common landscape feature that contribute to biodiversity in northeastern North American forests. However, even basic information about their biogeochemical functions, such as carbon cycling, is limited. Dissolved gas concentrations (CH₄, CO₂) and other water chemistry parameters were monitored weekly at the bottom and surface of four vernal pools in central and eastern Maine, USA, from April to August 2016. The vernal pools were supersaturated with respect to CH₄ and CO₂ at all sampling dates and locations. Concentrations of dissolved CH₄ and CO₂ ranged …

Transformation Of Nonlinear Waves In The Presence Of Wind, Current, And Vegetation, Haifei Chen

Electronic Theses and Dissertations

Accurate prediction of extreme wave events is crucial for the safe maritime activities and offshore operations. Improved knowledge of wave dissipation mechanisms due to breaking and vegetation leads to accurate wave forecast, protecting life and property along the coast. The scope of the thesis is to examine the wave transformations in the presence of wind, current, and vegetation, using a two-phase flow solver based on the open-source platform OpenFOAM. The Reynolds-Averaged Navier-Stokes (RANS) equations are coupled with a Volume of Fluid (VOF) surface capturing scheme and a turbulence closure model. This RANS-VOF model is adapted to develop a numerical wind-wave-current …

Nawic Focus (November 2017), National Association Of Women In Construction - Maine Chapter Staff

Maine Women's Publications - All

No abstract provided.

Systolic Orthostatic Hypotension Is Related To Lowered Cognitive Function: Findings From The Maine-Syracuse Longitudinal Study, Rachael V. Torres, Merrill Elias, Georgina E. Crichton, Gregory A. Dore, Adam Davey

Maine-Syracuse Longitudinal Papers

The aim of the present study was to examine the relationship between orthostatic changes in blood pressure (BP) and cognition, with consideration given to cardiovascular risk factors and lifestyle variables. The cross-sectional analysis included 961 community-dwelling participants of the Maine-Syracuse Longitudinal Study, for whom BP clinic measures (five sitting, five recumbent, and five standing) were obtained. Eighteen percent of participants had orthostatic hypotension (fall in systolic BP ≥20 mm Hg or diastolic BP ≥10 mm Hg upon standing) and 6% had orthostatic hypertension (rise in systolic BP ≥20 mm Hg). Orthostatic hypotension and hypertension defined using traditional criteria were unrelated …

Duration Of Load And Creep Effects Of Wood Composites, Advanced Structures & Composites Center, University Of Maine

General University of Maine Publications

The Duration of Load & Creep Effects Lab at the UMaine Advanced Structures and Composites Center has a complete creep testing facility capable of evaluating duration of load effects on wood composites such as panel products, structural composite lumber (SCL), and wood-plastic composites (WPC).

Wood Composites Manufacturing, Advanced Structures & Composites Center, University Of Maine

General University of Maine Publications

The UMaine Advanced Structures and Composites Center has a complete Wood Composites Pilot Line allowing production of up to 4’ x 8’ oriented strand board (OSB), laminated strand lumber (LSL), particle board, MDF, and other cellulosic composites on a near-industrial scale.

Structural Testing Of Wood And Wood-Based Products, Advanced Structures & Composites Center, University Of Maine

General University of Maine Publications

Maine’s economy has always drawn upon its forests. Our wood composites research not only follows this tradition, it allows future generations to do so, as well. International timber competition has forced Maine to become smarter about the lumber goods it produces, which is why the UMaine Advanced Structures and Composites Center has been working with industry to produce value added wood products since its inception in 1996. Focus areas have included FRP-reinforced glulam, structural composite lumber, wood-plastic composites, wood and bio-based panels, nanocellulose, and mass timber construction.

Mass Timber At Umaine, Advanced Structures & Composites Center, University Of Maine

General University of Maine Publications

Many architects and engineers believe that we are now in “the beginning of the timber age” where “plyscrapers” will soon be dotting city skylines all over the world. These tall wood buildings are a result of “mass timber” – a category of construction characterized by the use of large wood-based panels for wall, floor, and roof construction. Products in the mass timber family include: Cross-Laminated Timber (CLT), Nail-Laminated Timber (NLT), Glued-Laminated Timber (Glulam), and Structural Composite Lumber (SCL) e.g., Laminated Veneer Lumber (LVL), Laminated Strand Lumber (LSL), and Parallel Strand Lumber (PSL), as well as hybrid products manufactured with a …

Integrated Environment And Proximity Sensing For Uav Applications, Shawn S. Brackett

Electronic Theses and Dissertations

As Unmanned Aerial Vehicle (UAV), or “drone” applications expand, new methods for sensing, navigating and avoiding obstacles need to be developed. The project applies an Extended Kalman Filter (EKF) to a simulated quadcopter vehicle though Matlab in order to estimate not only the vehicle state but the world state around the vehicle. The EKF integrates multiple sensor readings from range sensors, IMU sensors, and radiation sensors and combines this information to optimize state estimates. The result is an estimated world map to be used in vehicle navigation and obstacle avoidance.

The simulation handles the physics behind the vehicle flight. As …

Characterization Of Catalysts For Hydrodeoxygenation Of Bio-Oils Using Phenol As A Model Compound, Abdulazeez Mohammed Khlewee

Electronic Theses and Dissertations

Due to the environmental considerations, depletion of fossil fuel reserves and fluctuating non-renewable fuel price, converting non-edible lignocellulosic biomass into renewable energy resources has gained significant importance. Phenol has been chosen as a model compound for catalytic screening because it is abundant in bio-oil composition and shows a high resistance to oxygen removal during hydrodeoxygenation (HDO) reactions. HDO of phenol produces chemicals that can be used as transportation fuels (Aromatics) or fuel additives. Theoretically, HDO of phenol has two distinct reduction pathways: direct deoxygenation (DDO) and hydrogenation (HYD). The previous results published by our group showed a precedent activity and …

So2-Alcohol-Water Fractionation Of Sugarcane Straw, Asif Sharazi

Electronic Theses and Dissertations

Climate change resulting from fossil fuels combustion is motivating researchers to explore feasible routes to convert renewable biomass into biofuels and biochemicals for a sustainable society. Typically, biofuel is produced from corn or sugarcane but both feedstocks compete with human food supply. Thus, lignocellulosics as renewable feedstock represent a more ethical and ecofriendly approach. Sugarcane straw (SCS) is a cheap and abundantly available feedstock which potentially can be used for biofuels/biochemicals production. It can also help to mitigate environmental and health problems resulting from conventional practice of SCS burning in the fields.

There are different biomass conversion technologies for production …

Creating Renewable Tunable Polymers From Hydroxymethylfurfural, Meredith C. Allen

Electronic Theses and Dissertations

The research here deals with the conversion of 5-hydroxymethylfurfural (HMF) into a tunable polymer. HMF is a known derivative that can be acquired from biomass via hydrolysis of cellulose followed by isomerization and finally selective dehydration. The process considered here is being developed to create tunable polymers from HMF and involves several different steps, three of which are covered here. The first step, an etherification, is the reaction of HMF with an alcohol. This step is significant because in this step the R-group from the alcohol is added to HMF and the branching portion formed is carried over to the …

Characterization Of Paper Dusting, Gregory K. Yum

Electronic Theses and Dissertations

Dusting of paper in various printing and processing operations is a common problem. The dusting tendency of a paper is difficult to characterize with standard laboratory methods; there is currently no standard test available. As the trend to create grades with high filler content continues, the issue of dusting will remain important. The goal of this thesis was to explore various methods to characterize the dusting and linting in a laboratory environment with limited samples and time.

Techniques to cause and collect dust are compared that include a tape pull test, a bending test, and an abrasion test. Methods to …

Structural Behavior Of Inflatable, Reinforced, Braided, Tubular Members, Joshua Clapp

Electronic Theses and Dissertations

The Hypersonic Inflatable Aerodynamic Decelerator (HIAD) system being developed by the National Aeronautics and Space Administration (NASA) is an inflatable structure composed of multiple, concentric, pressurized tori, load straps, and a thermal protection system. The HIAD overcomes limitations inherent with the use of rigid decelerators since the deployed diameter is much larger than the packed size, which makes it an enabling technology for new opportunities in space exploration. The HIAD is designed to decelerate and protect spacecraft during atmospheric re-entry. The objective of this research was to improve understanding of structural behavior of HIAD components through material testing, structural testing …

Window Inserts And The People Adopting Them: Building Sustainable Communities In Maine, Daniel Sean Mistro

Electronic Theses and Dissertations

Residents of Maine face a large monetary expense to heat their homes in the winter. In Maine it takes 540 gallons of heating oil each year to heat a typical home [1]. Interior window inserts may be a practical solution to improve comfort, save money, and consume less environmentally harmful fossil fuels during cold winter months. The window inserts discussed in this paper are custom measured to fit into a window and consist of a wooden frame that is wrapped in two layers of polyolefin film and weather stripped for a snug fit. Commercial inserts cost $20-$36/square foot, or approximately …

Nanocellulose Fibers As A Potential Material For Orthopedic Implantation Application, David Gregg Holomakoff

Electronic Theses and Dissertations

The field of biomaterials is of immense importance and will continue to grow and develop in the coming years. Novel materials, as well as new approaches for use of existing materials, are sought after now more than ever. Current metal orthopedic implants have an over engineered stiffness and Young’s modulus, causing a phenomenon called stress shielding. Metal implants absorb the majority of force typically exerted on bone and the osteocytes within. When osteocytes fail to sense mechanical forces bones become less dense and weaken, causing possible fracture and other complications. A new orthopedic material is needed matching Young’s modulus of …

An Automated Device To Increase Screening Throughput Of Zebrafish Larvae, Fuoad Saliou-Sulley

Electronic Theses and Dissertations

The use of the zebrafish as an animal model alternative to mammalian species has spawned research advancements in several medical fields. Since the zebrafish shares a high degree of sequence and functional homology with mammals, studies using this organism can provide in-depth insight into host response to disease and provide a platform for testing a range of treatment options. The optical transparency of zebrafish at early stages of development permits easy assessment of the effects of treatments, occurrence of tumors and other abnormal growth, disease progression, and immune response, to name only a few. These characteristics make it ideal for …

Large Payload Hiad Systems: Development Of Computationally Efficient Modeling Strategies And Structural Investigations, Andrew C. Young

Electronic Theses and Dissertations

The hypersonic inflatable aerodynamic decelerator (HIAD) system under development by the National Aeronautics and Space Administration (NASA) has the potential to deliver the size of payloads to the Martian surface that will be necessary for future human-scale missions. An important step in realizing the promise of the HIAD system is to understand the structural behavior of this inflatable, textile, relatively compliant system. This is accomplished through structural testing and the development of structural modeling and analysis methodologies and tools. The structural modeling tools that have been developed to date utilize a continuum, shell-based finite element (FE) analysis approach. This methodology …

Spatial Relations And Natural-Language Semantics For Indoor Scenes, Stacy A. Doore

Electronic Theses and Dissertations

Over the past 15 years, there have been increased efforts to represent and communicate spatial information about entities within indoor environments. Automated annotation of information about indoor environments is needed for natural-language processing tasks, such as spatially anchoring events, tracking objects in motion, scene descriptions, and interpretation of thematic places in relationship to confirmed locations. Descriptions of indoor scenes often require a fine granularity of spatial information about the meaning of natural-language spatial utterances to improve human-computer interactions and applications for the retrieval of spatial information. The development needs of these systems provide a rationale as to why—despite an extensive …

Nawic Focus (August-September 2017), National Association Of Women In Construction - Maine Chapter Staff

Maine Women's Publications - All

No abstract provided.

018637.00 Westbrook: Cumberland Mill Rotary Signalization, Vanasse Hangen Brustlin, Inc., Mileone & Macbroom, State Of Maine. Department Of Transportation

Maine Town Documents

Presentation Powerpoint slides on the proposed 2017 redesign of a Cumberland Mill Rotary impacting Main and Cumberland Streets, Harnois and Warren Avenue.