Engineering Commons^™

Harmonics Elimination In Three Phase Cascade H-Bridge Multilevel Inverter Using Virtual Stage Pwm, Amro Quedan

Durham School of Architectural Engineering and Construction: Dissertations, Thesis, and Student Research

The multilevel inverters are one of the great solutions that are proposed to satisfy the demand for high-power application and the significant integration of renewable energy. The conversion process from DC to AC must be done at high efficiency to decrease the energy loss and to ensure the electric grid power quality. The Total Harmonic Distortion (THD) is the most important feature that indicates the efficiency of the conversion process. In this research, due to the advantages of the cascade H-bridge inverter over other topologies, it has been used with the virtual stage PWM technique to investigate two different methods …

Garden Building Design Project, Gena Farley, Vanessa Villanueva, Jayanne Asuncion

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Staysha Delgado, Lillian Sam, Ryan Teixeira, Courtney Vierra

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Robb Garden Building, Joseph Cliscagne, Joseph Prescott, Tamara Turton, Saima Uz-Zaman

Building Information Modeling Final Projects

Final project from the EMGT 193/293 Building Information Modeling (BIM) course in the School of Engineering and Computer Science as part of the Bachelor of Science in Engineering Management degree. A student group designed and modeled a one-story building to house the Pacific Garden Program on campus.

Stewardship Of International Bim Programmes: Lessons For Ireland, Barry Mcauley, Alan Hore, Roger West, Shiyao Kuang

Conference papers

The support by central government of national Building Information Modelling (BIM) programmes is common throughout the developed world today. To further understand how the different international governments have supported their BIM programmes the BIM Innovation Capability Programme (BICP) research team in Ireland recently completed a comprehensive Global BIM Study to help inform the National BIM Council (NBC) of Ireland in developing a Roadmap to Digital Transition for Ireland’s Construction Sector. This paper details the findings of a more concentrated investigation on a selection of jurisdictions on how particular international BIM programmes are orgainsed, managed and the level of governmental support …

Measuring Walls In Accordance With Arm4 - An Introductory Demonstration, Tony Cunningham

Other Resources

This demonstration involves the measurement of 'traditional' external brick and block cavity walls and internal block partitions. The demonstration is addressed to students taking (Irish) measurement or quantities modules at first year / entry level of quantity surveying related programmes. The worked example has been carried out using traditional handwritten quantity surveying processes on traditional dimension paper. It is acknowledged that this would be carried out using measurement software or on-screen measurement technology in actual practice. The traditional handwritten approach has been retained in order to enable novice students to develop the necessary measurement skills and build confidence through direct …

What Lessons Can Be Learned From The Delivery Of The First Building On The Grangegorman Campus Using Building Information Management (Bim)?, Pat O'Sullivan, Avril Behan

Conference papers

There is an acceptance that BIM, via data management, can be integrated with FM to reduce costs during the Operations and Maintenance stage of a project. However, what has not been documented is the ‘on the ground’ reality which can be reviewed as a lessons learnt exercise to improve the implementation of BIM FM for future projects. This case study sets out to explore the realities of a client’s adoption of BIM based upon the actual experience of the Greenway Hub. Rather than relying on anecdotal evidence the research was based upon the real practices and experiences of the Dublin …

The Bridge Newsletter Winter 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Hands-on experience in concrete materials research and construction practices
-Making ACML progress
-Taos bridge project

Measuring Rheological Properties Of Cement Pastes: Most Common Techniques, Procedures And Challenges, Dimitri Feys, Rolands Cepuritis, Stefan Jacobsen, Karel Lesage, Egor Secrieru, Ammar Yahia

Civil, Architectural and Environmental Engineering Faculty Research & Creative Works

The Science of Rheology is Increasingly Used to Describe the Properties of Fresh Cement Paste. Compared to Standard Workability Tests, Rheological Properties Allow for More Fundamental Investigation, More Precise Phenomenological Description of Flow Properties and Serve as Input for Numerical Simulations. Standard Commercially Available Rheometers Are Typically Used to Perform Those Measurements. However, the Results of the Measurement Depend on the Geometry, Testing Procedure and a Number of Potential Artefacts. This Technical Letter Describes the Most Common Techniques and Procedures Used to Assess the Rheological Properties of Cement Paste, as Well as Challenges during Measurements and Actions to Counter These …

Bim+Blockchain: A Solution To The Trust Problem In Collaboration?, Malachy Mathews, Dan Robles, Brian Bowe

Conference papers

This paper provides an overview of historic and current organizational limitations emerging in the Architecture, Engineering, Construction, Building Owner / Operations (AECOO) Industry. It then provides an overview of new technologies that attempt to mitigate these limitations. However, these technologies, taken together, appear to be converging and creating entirely new organizational structures in the AEC industries. This may be characterized by the emergence of what is called the Network Effect and it’s related calculus. This paper culminates with an introduction to Blockchain Technology (BT) and it’s integration with the emergence of groundbreaking technologies such as Internet of Things (IoT), Artificial …

Hyperelastic Structural Fuses For Improved Earthquake Resilience Of Steel Concentrically-Braced Buildings, Francys López-Mosquera

Department of Civil and Environmental Engineering: Dissertations, Theses, and Student Research

Improving structural resilience (i.e., reducing service interruptions and improving rapidity of function restoration) following extreme events is one of the primary contemporary challenges in structural engineering. While massive casualties have successfully been avoided through the adoption of modern building codes, the sole codified performance objective has been limited to the life safety/collapse prevention range of response. Christchurch, NZ, highlighted the insufficiency of this approach, with large sections of the city nonfunctional after a major earthquake, and with subsequent collapses induced by significant aftershocks. Engineering advances to improve building and community resilience are necessary to mitigate hazards from becoming disasters. This …

Bim Innovation Capability Programme Of Ireland, Barry Mcauley, Alan Hore, Roger West

Conference papers

The Irish Government has requested that Enterprise Ireland, an organisation responsible for the development and growth of Irish enterprises in world markets to actively promote the use of BIM in Ireland. This promotion has taken the form of an opportunity for Enterprise Ireland clients to apply for a grant under their BIM Enable and BIM Implementation schemes and also through their funding of the BIM Innovation Capability Programme (BICP) of Ireland. The BICP is a two-year project (2016-2018) which seeks to capture the capability of the Irish Construction Industry and the Higher Education Institutes to respond to the increased requirement …

The Prevalence Of Six Sigma Trends In The Construction Industry In Pakistan, Muhammad M. Hassan

Masters Theses & Specialist Projects

Economic development in any country or area depends heavily on the performance of the construction industry. This is because the subsequent development of infrastructure increases economic activity, living standards, direct foreign investments, and business opportunities. The construction industry in Pakistan also plays a significant role in its economic activity, and the government’s focus towards increasing infrastructure development provides the construction industry with growth prospects. It is observed that quality management practices in the Pakistan construction industry are highly inadequate to enhance quality. The construction industry there is highly challenged with inadequate delays in projects and project quality. The need for …

Gas Collection, Haorong Li, Yanshun Yu, Daihong Yu

Durham School of Architectural Engineering and Construction: Faculty Publications

A system includes a vessel configured to couple with a gas source for drawing gas into the vessel. The vessel is also configured to receive liquid. The system includes an over flow port in fluid communication with the environment external to the vessel. The overflow port is configured to separate gas within the vessel from the external environment. The system also includes an overflow conduit having an end within the overflow port so that when gas pressure within the vessel increases, liquid is received by the over flow conduit. Another system includes a tank defining an air space for receiving …

Implementing Subspace Identification On Shake Table Model, Zoe T. Cooperband

Architectural Engineering

Stochastic Subspace Identification is a field of applied mathematics that takes collected experimental time-history data and gives out information about the system that produced the data. SSI is typically used in control analysis but here we apply the methods to the modal analysis of structures. This senior project didn’t involve theory - instead much of the work was in research behind how Subspace Identification works, implementing the algorithm in MATLAB, and applying the program to shake table data to validate the program. In other words, building the framework to make SSI a usable tool and practical learning experience for other …

Shrinkage Cracking In Concrete Tilt-Up Construction, Stewart Hooks, Jack Robinson

Architectural Engineering

The purpose of this project is to investigate a particular, undesirable cracking pattern in concrete tilt-up panels that, until now, did not have a known definite cause. The cause of this cracking pattern is hypothesized to be due to shrinkage restraint of the concrete panels. The cracking under investigation occurs at the bottom corners of the Tilt-Up panels, suggesting that the base of the panel is restrained from shrinkage. This project models various components of Tilt-Up Construction that have potential for restraining the panels from shrinking. This project consists of the following main components.

The first aspect of this project …

Effects Of Reverberation And Noise On Speech Comprehension By Native And Non-Native English-Speaking Listeners, Z. Ellen Peng, Lily M. Wang, Siu-Kit Lau, Adam M. Steinbach

Lily M Wang

Previous studies have demonstrated the negative impact of adverse signal-to-noise-ratios on non-native English-speaking listeners' performance on speech recognition using recall tasks, as well as implied that comprehension skills were more impaired than recognition skills under reverberation and noise. The authors have themselves previously conducted a pilot study on three native and three non-native Englishspeaking listeners to examine the effects of reverberation and noise using speech comprehension tasks. Those results suggested that speech comprehension performance is worse under longer reverberation times (RT), and that a longer RT is more detrimental to speech comprehension by non-native listeners than native listeners. This paper …

How Tonality And Loudness Of Noise Relate To Annoyance And Task Performance” Noise Control Eng. J. 65(2), 71-82., Joonhee Lee, Jennifer M. Francis, Lily M. Wang

Lily M Wang

Audible tones in noise generated by building mechanical equipment can be a leading cause of complaints from occupants. A number of metrics have been developed to quantify prominence of a tone, but previous work has shown that the impact of a certain tonality appears to vary with the level of the broadband noise signal. More work on how tonal signals of varying tonality, tone frequency and broadband noise levels relate to annoyance and task performance is needed. This paper investigates such relationships between current noise metrics, annoyance and task performance under assorted tonal noise conditions through subjective testing. Participants rated …

Acoustic Tweets And Blogs: Using Social Media In An Undergraduate Acoustics Course, Lily M. Wang

Lily M Wang

Each fall, the author teaches an undergraduate architectural acoustics course to around 40 third-year architectural engineering students at the University of Nebraska. Beginning in 2011, a social media component was introduced to explore the use of this technology and how it may supplement the students' learning experience. Students were given an opportunity to receive extra credit by using Twitter and/or blogging about course material using a set hashtag (#AE3300) or through the course website. Results were positive, and the author will discuss pros and cons that she has experienced in adding this social media component. Suggestions for future implementations and …

A Need For Evidence-Based And Multidisciplinary Research To Study The Effects Of The Interaction Of School Environmental Conditions On Student Achievement, Josephine Lau, Lily M. Wang, Clarence Waters, James A. Bovaird

Lily M Wang

With funding from the U.S. Environmental Protection Agency’s (EPA) Healthy Schools initiative, a research team from the University of Nebraska– Lincoln (UNL) is currently working on establishing how environmental conditions in K-12 school buildings impact student scholastic achievement. The objectives of the research project are: (1) to study comprehensively the impacts of a wide set of indoor environmental factors (including indoor air quality, thermal, lighting and acoustic conditions) on student achievement; (2) to investigate how these environmental conditions interact with each other to impact student achievement; (3) to rank order the environmental variables in terms of their relative impact on …

Speculations On A City For Mars, Edouard Terzis

School of Architecture - Theses

This thesis proposes the reinterpretation of architectural forms as the index of the constitution of the idea of the city. “Speculations on a City on Mars” is paradoxical in a sense as it superposes both the managerial representation of a city, that is Zoning, along with the speculative aspect of an extra-terrestrial city.

Modular House Revival, Kevin Chiang, Spencer Dilley, Sarah Dowthwaite, Trevor Houghton, Ryan Lefebvre, Michele Leung, Cameron Lober, Chris Martinez, Katie Mayer

Architectural Engineering

The Modular House, located in Poly Canyon, has seen extensive damage since the last caretaker left nearly ten years ago. To prevent further damage and improve the safety and appeal of the structure, we are proposing a renovation of the existing building that removes the existing cladding and partitions. By the end of Spring Quarter 2017, the Modular House will have a guardrail system replacing the wood paneling on the walls and a new steel composite deck to replace the current flooring system. The structural steel framing system will remain as is.

How Tonality And Loudness Of Noise Relate To Annoyance And Task Performance” Noise Control Eng. J. 65(2), 71-82., Joonhee Lee, Jennifer M. Francis, Lily M. Wang

Durham School of Architectural Engineering and Construction: Faculty Publications

Audible tones in noise generated by building mechanical equipment can be a leading cause of complaints from occupants. A number of metrics have been developed to quantify prominence of a tone, but previous work has shown that the impact of a certain tonality appears to vary with the level of the broadband noise signal. More work on how tonal signals of varying tonality, tone frequency and broadband noise levels relate to annoyance and task performance is needed. This paper investigates such relationships between current noise metrics, annoyance and task performance under assorted tonal noise conditions through subjective testing. Participants rated …

Wall Panel Optimization For Refugee Shelters In Germany: An Ahp Study, Zhu Jiadong

Masters Theses & Specialist Projects

The German government is experiencing difficulties housing and assimilating Syrian refugees in its borders. Erecting temporary shelters on location is one way to deal with the current crises. This thesis attempts to use Analytic Hierarchy Process (AHP) to determine the optimum combination of materials and construction methods to be used in the shelter’s walls in order to improve the living conditions of the refugees and to ensure that the cost is acceptable to the German government. This thesis compares six existing wall panel products from China, which have the lowest cost on the worldwide market. The R-value, strength, price, weight, …

Irish Bim Study 2017, Barry Mcauley, Alan Hore, Roger West

Articles

The Construction IT Alliance (CitA) recently published its Global BIM Study as part of its BIM Innovation Capability Programme (BICP). The study sought to identify how BIM was being currently addressed in 27 countries across the globe. The study sought to identify the presence of three key ingredients in these countries:

1. Regulatory requirement for BIM

2. Champions driving BIM

3. Noteworthy publications

The report identified a number of recurring themes that would help to shape Ireland’s BIM programme. The report concluded that Ireland should adopt a programme of partnership between industry and the Irish Government in order to affect …

Lateral Strength And Ductile Behavior Of A Mortise-Tenon Connected Timber Frame, Alexandros Kouromenos

Master's Theses

The primary goals of this project were to examine the amount of lateral force resisted by a single-bay mortise-tenon connected timber moment frame, and to introduce ductile behavior into the mortise-tenon connections by adding a steel sleeve around a traditional wood peg. This research aimed to provide proof that traditional timber frames are capable of ductile racking while reliably complying with ASCE 7-10 building code drift speci! cations, implying an increase in the ASCE 7-10 ductility factor (R) for wood frames when used as lateral force resisting elements. A secondary goal was to promote traditional heavy timber framing as a …

Bicp Global Bim Study - Lessons For Ireland’S Bim Programme, Barry Mcauley, Alan Hore, Roger West

Reports

The Construction IT Alliance (CitA) has been promoting the benefits of digitisation in the construction and engineering industry in Ireland since its formation back in 2002. Whilst the Alliance has always strived to ensure that its members are exposed to a wide spectrum of contemporary digital tools and processes, the concept of Building Information Modelling (BIM) has dominated the focus of its activities over the past five years.

BIM can be described as a digital tool that facilitates everybody to better understand a building or structure through the use of a digital model which draws on a range of data …

The Bridge Newsletter Spring 2017, Missouri University Of Science And Technology

The Bridge Newsletter

-Bayless retires
-Lifesaving flood relief
-Asphalt expert joins S&T
-First Prakash Lecture

2017 Scholarly Productivity Report, Missouri University Of Science And Technology

Civil, Architectural and Environmental Engineering Scholarly Productivity Reports

No abstract provided.

Linking Geospatial Engineering Into Collaborative Multidisciplinary Bim Projects - An Educational Perspective, Avril Behan, Helen Murray, Jonathan Argue, Ronan Hogan, Audrey Martin, Pat O'Sullivan, Robert Moore, Malachy Mathews

Conference papers

This paper describes the background to and execution of a postgraduate project undertaken by students on DIT's MSc in Geospatial Engineering (GeoEng) in support of a project on level 2 BIM being undertaken by students on the MSc in applied Building Information Modelling & Management (aBIMM) around the retrofit of and new build extension to the Grangegorman Clock Tower Building. In support of this requirement, an external and internal survey of the existing structure and its surrounding topography was required. The aBIMM students and staff acted as the Design Team who subcontracted the Geo Eng group who were organised into …