Engineering Commons^™

A Generative Statistical Approach For Data Classification In A Biologically Inspired Design Tool, Marvin Manuel Arroyo Rujano

Graduate Theses and Dissertations

The objective of the research this thesis describes is to find a way to classify text-based descriptions of biological adaption to support Biologically Inspired design. Biologically inspired design is a fairly new field with ongoing research. There are different tools to assist designers and biologists in bio-inspired design. Some of the most common are BioTRIZ and AskNature. In recent years, more tools have been proposed to aid and make research in the field easier, for example, the Biologically Inspired Adaptive System Design (BIASD) tool. This tool was designed with the goal of helping designers in early design stages generate more …

Origami-Based Design Of Fold States And Stability, Alex Avila

Theses and Dissertations

Origami is a potentially elegant and powerful source of inspiration for many engineering designs. The viable shapes (fold states) of a single device allow it to perform multiple, seemingly contradictory, functions. The fold state is a large factor in the device's performance, but there are challenges in selecting and maintaining those fold states. In this thesis we analyze existing concepts for overcoming these challenges. Those concepts are compared with those that occur in origami-based devices. From this analysis fundamental gaps were identified, specifically, shortcoming in the terminology used to refer to (1) non-flat origami states and (2) sets of facets …

Audio To Architecture: House Music As A Form Generator, Polina Timchenko

Architecture Undergraduate Honors Theses

Contemporary music undergoes similar process of creation to that of the design process through computation and variation. House music as a representation of contemporary culture has a layered structure that allows specific characteristics to identify it as house music. Song components can vary and mix in different orders that form new dynamic compositions. I am going to explore the idea that every house music component can be translated into geometry with the use of parametric design techniques.

Design Of Wind Turbine Tower Height And Blade Length: An Optimization Approach, Ryan Wass

Mechanical Engineering Undergraduate Honors Theses

The wind industry is a fast growing market and is quickly becoming competitive with traditional non-renewable energy resources. As with any developing industry, research must continually be redefined as more complex understandings of design variables are learned. Optimization studies are common ways to quickly refine design variable selections. Historical wind turbine data shows that the tower hub height to rotor diameter ratio scales almost linearly. However there is no specific rule that dictates the optimum hub height for a given diameter. This study addresses this question by using an Excel based optimization program to determine the height to diameter ratio …

Evaluation Of Site Variability And Its Application In Design, Abu Hakim Muhammad Hasan Faisal

LSU Master's Theses

Geotechnical characterization has an important role in engineering geology as well as in implementation of any project. There are several variables and uncertainties involved in characterizing a project site. Four different sources of uncertainties represent the characterization of geotechnical variability, which include spatial variability, measurement error, statistical error and model bias. Spatial variability is expressed in terms of the mean, variance, and scale of fluctuation. Several statistical techniques such as the Gauge R & R, which includes X-Bar/R and ANOVA, and the Second Moment can be applied to compute site variability in terms of the coefficient of variations. Measurement error …

Design Survey Of Laminated Composite I-Beam, Mrinmoy Saha

All Graduate Plan B and other Reports, Spring 1920 to Spring 2023

Composite I-beams are popular for high-strength low-weight applications. Learning the macro-mechanics and designing the composite I-beam properly are necessary. In this report, a design overview of the composite I-beam is discussed which is based on classical lamination theory where it includes the homogenization approach, the plane stress assumption and the Kirchhoff hypothesis. Using these assumptions, a method was developed to come up with the effective material properties of a beam. Formulas to calculate maximum deflection and maximum bending stress and shear stress and the stress concentration at the connection of web-flange are discussed which describe ways for designing and manufacturing …

The Investigation Of Silica Removal In Reverse Osmosis Concentrate By Changing Design Parameters, John M. Stomp Iv

Civil Engineering ETDs

Silica at high concentrations can precipitate and polymerize, forming scales on heat exchangers, boilers and turbines in industrial equipment, and on the feed side of the semi-permeable membranes in Reverse Osmosis (RO). Silica scale can cause decreased efficiency, increased treatment costs and, in some cases, irreversible damage. The removal of silica scale is challenging because it requires the handling of dangerous and hazardous chemicals. Therefore, much research has gone into the removal of soluble silica. The purpose of this research was to compare the overall effectiveness of silica removal in RO concentrate water with freshly precipitated Mg(OH)₂ and Fe(OH) …

Design For Maintainability In Developing Communities—A Case Study On The Uros Islands, Thomas Barlow

Undergraduate Honors Theses

Designing products for developing communities has exposed many of the underlying assumptions that engineers from developed nations have during the design process. There has been much written about these underlying assumptions in order to create a better framework for designing for developing communities. One unexplored, yet important area is the universality of common maintainability principles used in developed countries when designing products used in developing communities. Such principles include: simplicity, diagnosability, standardization of parts, modular subassemblies, minimizing assembly and disassembly parts, labeling components, increased life of moving parts, manuals, and simplifying tools needed for repairs [1]–[3]. The purpose of this …

Design And Performance Estimation Of A Low-Reynolds Number Unmanned Aircraft System, Sean Lauderdale King

LSU Master's Theses

The purpose of this thesis is to conceptually design a fixed-wing unmanned aircraft systems (UAS) with a higher flight-time and top stable speed than comparable systems. The vehicle adheres to specifications derived from the client, the market, and the Federal Aviation Administration (FAA). To broadly meet these requirements, the vehicle must fly for a minimum of three hours, return to the original flight path quickly if perturbed, and must be hand-launched. The vehicle designed must also have a large potential center of gravity movement to allow for customization of the planform and client customization.

An iterative design process was used …

Facilities Redesign Of Stockroom At Elcon Precision, David M. Brawner, Tyler O. Mastromattei, Jay Y. Matsumoto

Industrial and Manufacturing Engineering

Elcon Precision is a company based out of San Jose, California specializing in the photochemical processing of materials and brazing of metals and ceramics for a variety of different industries. Three students from the Industrial Engineering Department at California Polytechnic State University, San Luis Obispo were contacted by Elcon Precision to help redesign their stockroom and inventory areas in their San Jose location in order to allow for the future growth of the company. Elcon asked the Cal Poly project team to help increase efficiencies throughout the stockroom by creating an alternative layout that best suited the company's needs. This …

The Design Of A Digital Scheduling Solution For Healing Alternatives, Hailey A. Malin, Krista L. Mcallester, Anne E. Shields

Industrial and Manufacturing Engineering

The focus of this senior project is to assist Healing Alternatives, an acupuncture clinic located in San Luis Obispo, in developing a business management software to fit their needs and boost their overall organization. The approach to finding the right fit for this business included assessing their current system while simultaneously investigating other providers. Once alternatives were found that met all of Healing Alternatives’ initial requirements, trial demos were generated in order to perform user experience testing. The presented final solution, a scheduling software called Acuity Scheduling, was implemented in a three-phase move plan that occurred over the period of …

Design Of A Robotic Cownose Ray, Mark Marzotto

Honors Theses

Nature often inspires advances in science and technology and a promising example of this is mimicking locomotion of underwater animals. The main ways in which manmade aquatic vehicles propel themselves are water jets and propellers, which are inconsistent with how underwater animals swim. The cownose ray displays very efficient thrust with low frequency strokes by using a combination of oscillations and undulations with its pectoral fins. The goal of this paper is to mechanically replicate the actual fin motion of the cownose ray in order to capture these attractive features. The design will account for both the oscillations by designing …

Circuit Breaker Module, Garvin Yee, Yei Trinh

Electrical Engineering

The circuit breaker module for this design project is a proof of concept that demonstrates the functionality, feasibility, and attainability of a consumer grade power systems analysis device suitable for college laboratory use. The goal of this project was to create the final iteration of a module that has been developed and refined over the course of previous years. The Cal Poly Electrical Engineering Department intends to use this design to produce circuit breaker modules intended for fault analysis. With the current changes made to the previous modules, the current circuit breaker is lighter, safer, and more universally reproducible. The …

Corner Sealants For Tactical Shelters, Janine Carlita Nowak

Honors Theses

The demand for a lightweight, easy-assembly tactical shelter is high for those faced with unexpected disasters and global conflicts. This project focuses on designing and prototyping the corner sealant for such a shelter. Two materials were chosen and tested: an in-house thermoplastic polyurethane (TPU) and Texin 950. Thermogravimetric Analysis (TGA) was performed on both of these materials. The in-house TPU showed initial degradation at 282.50 °C and sample degradation at 457.45 °C. Similarly, Texin 950 showed initial degradation at 293.68 °C and sample degradation at 453.26 °C. Differential Scanning Calorimetry (DSC) was then run. The crystallization temperature (Tc) was observed …

Rickshaw For Common Ground, Marcus Dallin Cronin

Undergraduate Honors Capstone Projects

For this project my team and I were asked to design and manufacture a rickshaw, a device which will enable disabled individuals to experience outdoor hiking trails, for a non-profit organization based in Logan, Utah called Common Ground. Common Ground specializes in helping people with disabilities experience the outdoors in ways that would otherwise be impossible. The rickshaw will help Common Ground achieve its goals by providing them with a way to transport people with disabilities on moderately difficult hiking trails (i.e. Wind Caves Trail in Logan Canyon). In the past, Common Ground had use of a rickshaw that had …

Resiliency Vs Reality, Ainsley E. Henderson

Construction Management

This study analyzes the resilient design and construction features desired by Great Northern Services (GNS) for the design and construction of a new housing division in the City of Weed, California. This was compared to what the Cal Poly interdisciplinary student design teams were able to offer, by providing different design options. The study begins by showcasing the Boles fire and the connections that Cal Poly had made to support the City of Weed. The support was made through design and collaboration with Great Northern Services to create affordable housing. The study then discusses the needs that GNS wanted to …

The Setty Family Foundation 2018 Ashrae Applied Engineering Competition, Joshua Heath

Construction Management

The Setty Family Applied Engineering Challenge tasked my project group with designing a temporary shelter specifically for refugees in Eastern Europe to be used by governments, municipalities, and humanitarian agencies that is cost effective, portable, sustainable, and provides all necessary domestic needs. After months of research and design, we have developed the PolyShelter ; an eight-person structure erected to provide comfortability and safety to those in need. PolyShelter is designed to withstand the harshest of climates, provide exceptional insulation, and incorporate a rainwater collection system sufficient enough to support each unit. PolyShelter proves itself to be an economically viable solution …

Multipurpose Glider-Quadcopter Uas, Cody Delarosa, Lucas Richards, Ty Hilton

Senior Design Project For Engineers

The goal for this design was to develop a dual stage UAS that will deliver medical supplies to people in need in remote locations. To accomplish this, a quadcopter was designed to release a glider with the payload therein. A scaled down prototype was produced for analysis purposes. A conceptual model was fully designed that is capable of effectively taking off vertically, accelerating to a desired velocity, releasing the glider, and returning back to the initial takeoff location. The glider was designed to be fully controllable in order to accurately reach the desired location. System aerodynamics and quadcopter propulsion were …

Design And Probabilistic Analysis Of Mid- And High-Rise Wood Buildings Subjected To Earthquake Excitations, Shucheng Yang

Electronic Thesis and Dissertation Repository

Mass timber products, such as the glulam or cross laminated timber (CLT), are less frequently used construction materials at present for mid-rise and high-rise buildings. The feasibility and possible advantages of applying timber materials for constructing mid- and high-rise buildings are under investigation. One of the issues that needs to be addressed for the use of heavy timber materials is the safety of such constructions under seismic excitations. To address this issue, the nonlinear inelastic seismic responses and capacity curves of a wood buildings must be assessed. For this, the 10-, 15- and 20-storey buildings are designed using heavy timber …

Rc Baja Car Suspension, Tyler Martin

All Undergraduate Projects

This year the Mechanical Engineering Technology Department at CWU is holding an R/C Baja car competition using the same rules as the ASME competition. The designed car must compete in three separate events: the slalom course, drag race, and obstacle course. By not only completing, but also being competitive in each of the events, the car will be deemed a success. Suspension and steering are two essential components of any R/C car, and was the main focus for this report. The suspension must be able to support the car in the event of impacts. In addition, the steering must be …

Senior Project Hauff Tree Pruner, Brian Woolery

All Undergraduate Projects

Neil Hauff, a business owner and entrepreneur from the Yakima valley challenged a team of engineering students from Central Washington University to design a motorized apple tree pruner. This report will discuss the engineering and construction that went into creating the housing of the tree pruner. The housing component needed to be able to protect the moving parts of the pruner, while withstanding the rotational torque produced by the Makita power drill used to drive the pruner. The biggest constraint in designing the housing was to keep the weight of the housing component under 1.5 lbs, while still keeping the …

Designing Novel Grooved Pallets For Industrial Application, Mirza Mohammed Abdullah Baig

ETD Archive

The purpose of this study was to model an improved pallet design which could overcome the drawbacks and failures of the pallets available in the market today. The new modeled pallets were designed to improve the capacity of the individual pallets and thereby increase the efficiency of the material handling process. The new modeled pallets were also designed with the aim to replace the racking system used for storage in the warehouse industry. The study was performed using two finite element analysis software, SOLIDWORKS and ANSYS, as analysis tools to study the behavior of the design under various real world …

Advanced Manufacturing Of Titanium Alloys For Biomedical Applications, Nicholas C. Mavros

ETD Archive

In metallurgy, Titanium has been a staple for biomedical purposes. Its low toxicity and alloying versatility make it an attractive choice for medical applications. However, studies have shown the difference in elastic modulus between Titanium alloys (116 GPa) and human bone (40-60 GPa) contribute to long term issues with loose hardware fixation. Additionally, long term studies have shown elements such as Vanadium and Aluminum, which are commonly used in Ti-6Al-4V biomedical alloys, have been linked to neurodegenerative diseases like Alzheimers and Parkinsons. Alternative metals known to be less toxic are being explored as replacements for alloying elements in Titanium alloys. …

Design And Evaluation Of A Tactile Texture Production System, Samuel Benjamin Fertel Shuster

Graduate College Dissertations and Theses

Students who are blind or have low-vision (BLV) do not have the same access to graphical curricular content as their sighted peers. This significantly affects their education, particularly in STEM subjects. Introduction of interactive tactile graphics is one of the only ways for BLV students to access graphical content, and is uniquely suited to teaching drawing skills. The goal of this engineering design project was to expand the capacity of printing technology that produces interactive raised-line graphics by creating a system to print textures that meet specific criteria for usefulness. The addition of textures to tactile graphics is essential for …

Design, Synthesis, And Characterization Of Monometallic And Bimetallic Catalysts, Sonia Eskandari

Theses and Dissertations

Supported catalysts are used extensively in a variety of heterogeneously catalyzed reactions for industrial processes. Techniques for preparing supported noble metal catalysts are typically chosen to achieve high metal dispersions in order to obtain high activity for a given metal loading. Enhancing the catalytic performance of heterogeneous catalysts can be done by increasing active site count as well as modification of the physico-chemical characteristics of the catalyst material. For supported metal nanoparticles this can be achieved by decreasing particle size, thus increasing dispersion or metal utilization on the surface of the particles, while modification of metal properties can be attained …

A Monolithic Internal Strain-Gage Balance Design Based On Design For Manufacturability, Thomas Ladson Webb Iii

Mechanical & Aerospace Engineering Theses & Dissertations

This paper proposes an alternative approach to internal strain-gage balance design driven by Design for Manufacturability (DFM) principles. The objective of this research was a reduction in fabrication time and, subsequently, cost of a balance by simplifying its design while maintaining basic stiffness and sensitivity. Traditionally, the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) balance designs have relied on Electro-Discharge Machining (EDM), which is a precise but slow and, therefore, expensive process. EDM is chosen due to several factors, including material hardness, surface finish, and complex geometry, including blind cuts. The new balance design objectives require no …

Structural And Aerodynamic Design, Procedure And Analysis Of A Small V-Shaped Vertical Axis Wind Turbine, Odari J. Whyte

Electronic Theses and Dissertations

Over the last two decades there has been a renewed interest in Vertical Axis Wind Turbines. This turbine configuration though unpopular for large-scale generation has found a niche market in the way of offshore energy harvesting. However, offshore wind has its challenges. In this thesis a detailed comprehensive study of a proposed V-shaped vertical axis turbine rotor is performed in order to examine its structural and aerodynamic characteristics. The design met and exceeded the safety parameters establish for test bed operation, showing a factor of safety of 1.87 with regard to fatigue stress response. A satisfactory fatigue stress design life …

The Design, Development, And Evaluation Of A Usable And Privacy-Enhanced Telepresence Interface For Older Adults, Xian Wu

Theses and Dissertations

Maintaining health and wellness while aging-in-place independently is crucial for older adults. Telepresence technology can be potentially beneficial for this target population to stay socially connected. However, this technology is not specifically designed for older adults. For this target population to adopt such technology successfully, it is important to ensure that they do not experience usability barriers. This research uses HCI/HRI concepts and technology design principles for older adults to design, develop and test telepresence user interfaces (UI). This addresses the following research questions: 1): What are the essential usability and privacy-enhanced features needed to inform the design and development …

An Integrated System To Design Machine Layouts For Modular Special Purpose Machines, Uday Hameed Farhan

Theses: Doctorates and Masters

This thesis introduces the development of an integrated system for the design of layouts for special purpose machines (SPMs). SPMs are capable of performing several machining operations (such as drilling, milling, and tapping) at the same time. They consist of elements that can be arranged in different layouts. Whilst this is a unique feature that makes SPMs modular, a high level of knowledge and experience is required to rearrange the SPM elements in different configurations, and also to select appropriate SPM elements when product demand changes and new layouts are required. In this research, an integrated system for SPM layout …