Engineering Commons^™

Accumulator Volume Sensor Final Project Report, Chris Naughton, Kinwei Yu, Michael George

Mechanical Engineering

Accumulator Volume Sensing Team has developed two sensor designs aimed at detecting the position of the piston within a 4024 accumulator. The two designs include the use of a Renishaw LMA10 magnetic encoder and a SpectraSymbol HotPot linear potentiometer. The magnetic encoder solution drastically increases the accuracy of sensing the piston position compared to the current solutions of both a string-pot and linear variable differential transformer while costing slightly less. The linear potentiometer seeks to provide a solution that drastically decreases the cost compared to the present sensing methods. Both designs call for a modification to one half of the …

Improvement Of A Biomechanical Telemetry System Hardware Platform, Soon Ho Kwon

Open Access Theses

Traumatic brain injuries (TBI) while playing sports are a major concern for the general public today. Recently, studies have shown that repetitive subconcussive hits can lead to neurological disorders. In order to prevent the athletes from suffering traumatic brain injuries, many organizations related to contact based sports and the military employ commercialized head impact telemetry systems. However, a majority of the commercialized systems is event based which only collects the linear acceleration that exceeds a certain threshold. To accurately record and utilize the data from the impact telemetry system, it is necessary to record all the linear and angular acceleration …

Tunable Plasmonic Thermal Emitter Using Metal-Coated Elastomeric Structures, Robert Zando

Masters Theses

This project was focused on the creation of a gold-coated grating structure capable of inducing a surface plasmon polariton within the mid-infrared region, enhancing emissions at specific wavelengths based on the grating periodicity. The grating structure was formed on a silicone elastomer, polydimethylsiloxane (PDMS), in order to give the structure, the ability to have the periodicity dimensions of the grating altered by applying a stress, thereby changing the location of the emission enhancement, giving the device the potential to be used as an infrared strain sensor.

Creation of the structure employed a top-down, micro-scale fabrication technique referred to as Direct …

Analytical Modeling Of A Novel Microdisk Resonator For Liquid-Phase Sensing: An All-Shear Interaction Device (Asid), Mohamad Sadegh Sotoudegan

Dissertations (1934 -)

Extensive research on micro/nanomechanical resonators has been performed recently due to their potential to serve as ultra-sensitive devices in chemical/biosensing. These applications often necessitate liquid-phase sensing, introducing significant fluid-induced inertia and energy dissipation that reduces the resonator’s performance. To minimize the detrimental fluid effects on such devices, a novel microdisk resonator supported by two tangentially-oriented, axially-driven “legs” is investigated analytically and effects of the system parameters on the resonator/sensor performance are explored. Since the device surface vibrates primarily parallel to the fluid-structure interface, it is referred to here as an “all-shear interaction device,” or ASID. Analytical modeling of the ASID …

Duck Watch: A Smart System For Public Lap Pools, Daniel Griffith, Jill Thetford

Computer Engineering

This paper presents Duck Watch, a proof of concept for a smart swimming pool. With our system, a swimmer will be able to log on to our website prior to leaving his or her house to help them decide if the conditions are favorable to go to a public lap swimming pool. Our system will inform the user of a number of environmental factors such as water temperature, exterior temperature, and humidity, as well as whether or not there are any open lanes currently.

Development Of Strain And Pressure Sensors On Flexible And Stretchable Platforms, Mohammed Mudher Mohammed Ali

Masters Theses

The capability of the human brain to operate in conjunction with human senses and muscles enables us to become powerful autonomous beings. By using these organs, humans can interact with the surrounding environment. Similarly, the combination of sensors with the signal processing of modern electronics enables the interaction with the non-electrical environment.

In this thesis, the work focuses on the design and fabrication of flexible and stretchable sensors which have been receiving an increased interest for applications such as human body movement, tracking in the biomedical industry, object detection, fingerprint sensor as well as for monitoring deformations or structural changes …

Critter Sitter: Weight Sensing Pet Door, Shelby Richardson

Electrical Engineering

Martin Kaliski is a typical pet owner. He currently houses both cats and a dog. In order to keep from having to constantly let his pets out in the middle of the night he has installed a pet door into his home. All was well and good until early one morning Martin woke up to the sound of his Pomeranian barking violently. He ran downstairs to see what the problem was. He not only found his dog standing there but also a wild raccoon. The raccoon had slipped into the house in the early morning and was rummaging through the …

Sensing Gyroscopic Properties Of Rotating Magnetic Nanoparticles In Solution, Brian Gerald Krug

Dissertations

A new sensor using magnetic nanoparticles and rotating magnetic fields has been developed. By spinning the nanoparticles in a rotating magnetic field, it is feasible to infer angular position and inertia if an external force is applied to the system. The nanoparticles are treated as a multitude of miniature gyroscopes whose overall effect can be combined as one single gyroscope. Two sensors were built to test the feasibility, both containing Fe3O4 nanoparticles.

The typical input current was 250 milliamps. When the sensor deviated from its magnetic axis by a small angle, the input current changed between 1 and 2 milliamps …

Investigation Of The Use Of A Plasticizer-Polymer Sensor Coating With Improved Long-Term Stability In The Liquid Phase, Laura Jeanne Alderson

Master's Theses (2009 -)

Benzene is one of the volatile organic compounds present in crude oil and gasoline. Leakage from underground storage tanks or hazardous waste sites can introduce benzene contamination into nearby groundwater. Benzene is a known carcinogen and its exposure is limited by the Environmental Protection Agency to 5 parts per billion (ppb) in drinking water. Early, accurate detection of the presence of benzene contamination in groundwater supplies is extremely important. Shear horizontal surface acoustic wave (SH-SAW) devices with a chemically sensitive coating can be used for the detection of volatile organic compounds in liquid, such as BTEX (benzene, toluene, ethylbenzene and …

Thermal Microfluidic Devices; Design, Fabrication And Applications, Benyamin Davaji

Dissertations (1934 -)

This thesis investigates the thermal actuation and temperature measurement methods in microfluidic devices. We designed and fabricated microfluidic devices with various functionalities such as: bio sensing, particle counting, microscale calorimetry, and cellular temperature measurement. All of these functionalities use thermal measurement methods. When quantitative measurements are required, the label-free nature of thermal measurement methods, along with its simple readout, make it a powerful candidate for lab on a chip and bio sensing/detection applications. In this work, thermal measurement methods are used to characterize bio-samples, measure concentrations, study thermal responses, and even perform particle cytometry. However, thermal measurement methods are known …

Microfluidic Devices And Biosensors, Long-Fang Tsai

Theses and Dissertations

My research broadly covers various important aspects of microfluidic devices and biosensors. Specifically, this dissertation reports: (1) a new and effective room temperature method of bonding polydimethylsiloxane (PDMS) microfluidics to substrates such as silicon and glass, (2) a new microfluidic pump concept and implementation specifically designed to repeatedly drive a small sample volume (<1 µL) very rapidly (~500 µL/min) through a sensor-containing flow channel to significantly decrease sensor response time through advection-driven rather than diffusion-driven mass transport, (3) use of a new microfluidic material based on polyethylene glycol diacrylate (PEGDA) to implement impedance-based dynamic nanochannel sensors for protein sensing, and (4) an investigation of galvanoluminescence and how to avoid it for conditions important to fluorescence-based dielectrophoresis (DEP) microfluidic biosensors. Over the last decade, the Nordin research group has developed a lab-on-a-chip (LOC) biosensor based on silicon photonic microcantilever arrays integrated with polydimethylsiloxane (PDMS) microfluidics for protein biomarker detection. Integration requires reliable bonding at room temperature with adequate bond strength between the PDMS element and microcantilever sensor substrate. The requirement for a room temperature process is particularly critical because microcantilevers must be individually functionalized with antibody-based receptor molecules prior to bonding and cannot withstand significant heating after functionalization. I developed a new room temperature bonding method using PDMS curing agent as an intermediate adhesive layer. Two curing agents (Sylgard 184 and 182) were compared, as well as an alternate UV curable adhesive (NOA 75). The bond strength of Sylgard 184 was found to be stronger than Sylgard 182 under the same curing conditions. Overnight room temperature curing with Sylgard 184 yields an average burst pressure of 433 kPa, which is more than adequate for many PDMS sensor devices. In contrast, UV curable epoxy required a 12 hour bake at 50 °C to achieve maximum bond strength, which resulted in a burst pressure of only 124 kPa. In many biosensing scenarios it is desirable to use a small sample volume (<1 µL) to detect small analyte concentrations in as short a time as possible. I report a new microfluidic pump to address this need, which we call a reflow pump. It is designed to rapidly pump a small sample volume back and forth in a flow channel. Ultimately, the flow channel would contain functionalized sensor surfaces. The rapid flow permits use of advection-driven mass transport to the sensor surfaces to dramatically reduce sensor response times compared to diffusion-based mass transport. Normally such rapid flow would have the effect of decreasing the fraction of analyte molecules in the volume that would see the sensor surfaces. By configuring the pump to reflow fluid back and forth in the flow channel, the analyte molecules in the small sample volume are used efficiently in that they have many opportunities to make it to the sensor surfaces. I describe a 3-layer PDMS reflow pump that pumps 300 nL of fluid at 500 µL/min for 15 psi actuation pressure, and demonstrate a new two-layer configuration that significantly simplifies pump fabrication. Impedance-based nanochannel sensors operate on the basis of capturing target molecules in nanochannels such that impedance through the nanochannels is increased. While simple in concept, the response time can be quite long (8~12 hours) because the achievable flow rate through a nanochannel is very limited. An approach to dramatically increase the flow rate is to form nanochannels only during impedance measurements, and otherwise have an array of nanotrenches on the surface of a conventional microfluidic flow channel where they are exposed to normal microfluidic flow rates. I have implemented such a dynamic nanochannel approach with a recently-developed microfluidic material based polyethylene glycol diacrylate (PEGDA). I present the design, fabrication, and testing of PEGDA dynamic nanochannel array sensors, and demonstrate an 11.2 % increase in nanochannel impedance when exposed to 7.2 µM bovine serum albumin (BSA) in phosphate buffered saline (PBS). Recently, LOC biosensors for cancer cell detection have been demonstrated based on a combination of dielectrophoresis (DEP) and fluorescence detection. For fluorescence detection it is critical to minimize other sources of light in the system. However, reported devices use a non-noble metal electrode, indium tin oxide (ITO), to take advantage of its optical transparency. Unfortunately, use of non-noble metal electrodes can result in galvanoluminescence (GL) in which the AC voltage applied to the electrodes to achieve DEP causes light emission, which can potentially confound the fluorescence measurement. I designed and fabricated two types of devices to examine and identify conditions that lead to GL. Based on my observations, I have developed a method to avoid GL that involves measuring the impedance spectrum of a DEP device and choosing an operating frequency in the resistive portion of the spectrum. I also measure the emission spectrum of twelve salt solutions, all of which exhibited broadband GL. Finally, I show that in addition to Au, Cr and Ni do not exhibit GL, are therefore potentially attractive as low cost DEP electrode materials.

Application Of Embedded Frequency Selective Surfaces For Structural Health Monitoring, Dustin Franklin Pieper

Masters Theses

"This thesis proposes the use of Frequency Selective Surfaces (FSSs) as an embedded structural health monitoring (SHM) sensor. FSSs are periodic arrays of conductive elements that filter certain frequencies of incident electromagnetic radiation. The behavior of this filter is heavily dependent on the geometry of the FSS and local environment. Therefore, by monitoring how this filtering response changes when the geometric or environmental changes take place, information about those changes may be determined. In previous works, FSS-based sensing has shown promise for sensing normal strain (a stretching or compressing geometrical deformation). This concept is extended in this thesis by investigating …

Investigation Of The Optical And Sensing Characteristics Of Nanoparticle Arrays For High Temperature Applications, Gnanaprakash Dharmalingam

Legacy Theses & Dissertations (2009 - 2024)

The monitoring of polluting gases such as CO and NOx emitted from gas turbines in power plants and aircraft is important in order to both reduce the effects of such gases on the environment as well as to optimize the performance of the respective power system. The need for emissions monitoring systems is further realized from increased regulatory requirements that are being instituted as a result of the environmental impact from increased air travel. Specifically, it is estimated that the contributions from aircraft emissions to total NOx emissions will increase from 4% to 17% between 2008 and 2020. Extensive fuel …

Design And Evaluation Of A Fiber Optic Shape Tracker For Use As A Navigational Aid In Endovascular Guidewires And Catheters, Benjamin Stewart Rinehart

Browse all Theses and Dissertations

Endovascular intervention is the current gold-standard for screening and treating aortic aneurysms and complications caused by peripheral vascular disease (PAD). A typical endovascular procedure begins with inserting an endovascular guidewire into the femoral artery via incision. A catheter is then threaded over the guidewire and both tools are then navigated to the treatment site. The navigation is guided solely by fluoroscopy (x-ray) imagery that is performed throughout the duration of the procedure. Not only does this method provide limited 2-D guidance, but also exposes the patient and medical staff to high levels of radiation. This thesis research focuses on the …

Wireless Implantable Magnetoelastic Sensors And Actuators For Biomedical Applications, Andrew Derouin

Dissertations, Master's Theses and Master's Reports

Magnetoelastic sensors represent a low-cost wireless and battery-less method for monitoring parameters in embedded or implanted applications; however, some limitations still exist preventing their commercial implementation. Presented in this work are a variety of studies that are aimed at improving the feasibility of magnetoelastic materials for sensing and actuating applications. Magnetoelastic resonant sensors of non-standard geometries were investigated to determine if geometry could play a role on the sensitivity of the sensor response to mass loading. It was shown that a significant increase in sensitivity could be achieved by using triangular sensors rather than standard rectangular strips. A method for …