Engineering Commons^™

Brain Motion, Deformation, And Potential Injury During Soccer Heading, Charles F. Babbs

Weldon School of Biomedical Engineering Faculty Working Papers

This paper addresses the problem of what is happening physically inside the skull during head-ball contact. Mathematical models based upon Newton’s laws of motion and numerical methods are used to create animations of brain motion and deformation inside the skull.

Initially a 1 cm gap filled with cerebrospinal fluid (CSF) separates the brain from the rigid skull in adults and older children. Whole head acceleration induces a pulse of artificial gravity within the skull. Because brain density differs slightly from that of CSF, the brain accelerates and strikes the inner aspect of the skull, undergoing viscoelastic deformation, ranging from 1 …

A Novel Concrete-Based Sensor For Detection Of Ice And Water On Roads And Bridges, Habib Tabatabai, Mohammed Aljuboori

Civil and Environmental Engineering Faculty Articles

Hundreds of people are killed or injured annually in the United States in accidents related to ice formation on roadways and bridge decks. In this paper, a novel embedded sensor system is proposed for the detection of black ice as well as wet, dry and frozen pavement conditions on roads, runways, and bridges. The proposed sensor works by detecting changes in electrical resistance between two sets of stainless steel poles embedded in the concrete sensor to assess surface and near-surface conditions. A preliminary decision algorithm is developed that utilizes sensor outputs indicating resistance changes and surface temperature. The sensor consists …

Effectiveness Of Chain Link Turtle Fence And Culverts In Reducing Turtle Mortality And Providing Connectivity Along U.S. Hwy 83, Valentine National Wildlife Refuge, Nebraska, Usa, Marcel P. Huijser, Kari E. Gunson, Elizabeth R. Fairbank

Nebraska Department of Transportation: Research Reports

We evaluated the effectiveness of existing turtle fences through collecting and analyzing turtle mortality data along U.S. Hwy 83, in and around Valentine National Wildlife Refuge, Nebraska, USA. We also investigated the level of connectivity for turtles provided through the culverts that were originally designed to pass water through a capture-mark-recapture experiment. While fenced valley sections had 33.1% fewer turtle observations than unfenced valley sections, the difference was not significant. However, we think that the effectiveness of the fence can be improved through fence repairs, other modifications of the fences, vegetation maintenance, and extending the length of the fences. Four …

Safety Concepts For Workers From An Osha Perspective, Zamaan Al-Shabbani, Roy E. Sturgill Jr., Gabriel B. Dadi

Kentucky Transportation Center Research Report

Highway construction and maintenance workers face numerous hazards on job sites, many of which are unique by industry standards. Despite the exposure of state transportation agency employees and contractors to these hazards, there are few safety standards, regulations, programs that directly target the sector aimed at prevention and mitigation. To help the Kentucky Transportation Cabinet (KYTC) improve employee safety, researchers at the Kentucky Transportation Center (KTC) analyzed the frequency and causes of workplace injuries for 10 essential Cabinet maintenance operations. Most incidents were attributable to human factors or ergonomics. Based on this analysis, the leading causes of incidents, and a …

Increased Span Length For The Mgs Long-Span Guardrail System Part Iii: Failure Analysis, Sagheer A. Ranjha, Robert W. Bielenberg, John D. Reid, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to review and analyze the system failure observed during crash testing of an increased span length for the MGS long-span guardrail system in test no. MGSLS-2. Test no. MGSLS-2 was a full-scale crash test conducted on the MGS long-span guardrail with a span length of 311⁄4 ft (9.5 m). This test utilized universal breakaway steel posts (UBSPs) adjacent to the long span in lieu of the controlled release terminal (CRT) wood posts used in previous long span systems.

An engineering analysis was undertaken to review the downstream end anchorage failure observed in test …

Radiative Heat Transfer Analysis Of Railroad Bearings For Wayside Hot-Box Detector Optimization, Arthur Mealer, Constantine Tarawneh, Stephen Crown

Mechanical Engineering Faculty Publications and Presentations

The railroad industry utilizes wayside detection systems to monitor the temperature of freight railcar bearings in service. The wayside hot-box detector (HBD) is a device that sits on the side of the tracks and uses a non-contact infrared sensor to determine the temperature of the train bearings as they roll over the detector. Various factors can affect the temperature measurements of these wayside detection systems. The class of the railroad bearing and its position on the axle relative to the position of the wayside detector can affect the temperature measurement. That is, the location on the bearing cup where the …

Evaluation Of Floorpan Tearing And Cable Splices For Cable Barrier Systems, Scott K. Rosenbaugh, Jason A. Hartwell, Robert W. Bielenberg, Ronald K. Faller, James C. Holloway, Karla A. Lechtenberg

Nebraska Department of Transportation: Research Reports

This research effort consisted of two objectives related to components of a prototype cable barrier system. The first objective was to mitigate the potential for vehicle floorpan tearing by modifying the cable guardrail posts. A bogie vehicle was equipped with a simulated floorpan designed to replicate the height, thickness, and strength of the floorpan of a Kia Rio vehicle. Baseline testing demonstrated that the top of the Midwest Weak Post (MWP) would contact, and crease the simulated floorpan, which matched the damage observed in actual full-scale vehicle crash tests. Once the test setup provided the desired results, various post configurations …

Length Of Need And Minimum System Length For F-Shape Portable Concrete Barrier, Robert W. Bielenberg, Dylan T. Meyer, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Portable concrete barrier (PCB) systems are often used to redirect errant vehicles through a combination of inertial resistance, lateral friction loads, and tensile loads developed from the mass and friction of the barrier segments. State departments of transportation (DOTs) and other end users may wish to utilize minimal length PCB installations to shield a hazard or work zone or limit the number of barriers required on the upstream and downstream ends to reduce overall system length. However, concerns with the performance of shorter PCB installations include increased lateral deflections and working widths and barrier pocketing. Additionally, no impact testing has …

Testing And Evaluation Of Mash Tl-3 Transition Between Guardrail And Portable Concrete Barriers, Robert W. Bielenberg, Jessica L. Lingenfelter, Justine E. Kohtz, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

Three full-scale vehicle crash tests were conducted according to the Manual for Assessing Safety Hardware (MASH) Test Level 3 (TL-3) safety performance criteria on a transition between the Midwest Guardrail System (MGS) and a portable concrete barrier (PCB) system. The transition system utilized for test nos. MGSPCB-1 through MGSPCB-3 consisted of a standard MGS that overlapped a series of F- shape PCB segments that approached the MGS at a 15H:1V flare. In the overlapped portion of the barrier systems, uniquely-designed blockout holders and a specialized W-beam end shoe mounting bracket were used to connect the systems.

In test no. MGSPCB-1, …

Increased Span Length For The Mgs Long-Span Guardrail System Part Ii: Full-Scale Crash Testing, Dylan T. Meyer, John D. Reid, Karla A. Lechtenberg, Robert W. Bielenberg, Ronald K. Faller

Nebraska Department of Transportation: Research Reports

The objective of this research study was to design and evaluate the MGS long-span design for use with unsupported spans greater than 25 ft (7.6 m). Two full-scale crash tests were conducted to evaluate the MGS long-span system with increased span lengths and the use of UBSP posts adjacent to the long span. Both tests were conducted according to the TL- 3 criteria outlined in MASH. Both test nos. MGSLS-1 and MGSLS-2 were conducted with the 2270P vehicle impacting their respective critical impact points at a speed of 62 mph (100 km/h) and an angle of 25 degrees. Test no. …

Industrial-Grade Monitoring Solution: Hoistcam, Purdue Ect Team

ECT Fact Sheets

Safety and productivity are top priorities for contractors and industrial operations. Improving either makes a company more profitable and competitive. Technology advancements that can do both are important for every company to consider. HoistCam^TM industrial-grade video monitoring solutions can improve employees’ productivity and workplace safety in the construction industries. HoistCam also improves efficiency of operations and reduces job site accidents resulting in substantial cost savings to a contractor.

HoistCam™ is an integrated, wireless video system. The use of HoistCam eliminates blind lifts, blind spots and can share the live video with anyone, anywhere with solid security and easy control. …

Ls-Dyna® Modeling Enhancement Support, John D. Reid, Robert W. Bielenberg, Chaz Ginger

Nebraska Department of Transportation: Research Reports

The Pooled Fund Program member states provided funding for LS-DYNA modeling enhancements in Years 17 thru 22 (2006-2011), with a project period of 2006-2016. This report documents many of the modeling issues addressed throughout the project period. The funding has been effectively utilized to advance the current state-of-the-art for computer simulation and has provided the following benefits for the entire industry: (1) improved roadside safety hardware, (2) reduced development time and cost, (3) improved understanding of the behavior of roadside safety features, especially for impacts outside of normal crash test conditions, (4) improved LS-DYNA modeling techniques and procedures, and (5) …

Development Of Prognostic Techniques For Surface Defect Growth In Railroad Bearing Rolling Elements, Nancy De Los Santos, Robert Jones, Constantine Tarawneh, Arturo A. Fuentes, Anthony Villarreal

Mechanical Engineering Faculty Publications and Presentations

Prevention of bearing failures which may lead to catastrophic derailment is a major safety concern for the railroad industry. Advances in bearing condition monitoring hold the promise of early detection of bearing defects, which will improve system reliability by permitting early replacement of failing components. However, to minimize disruption to operations while providing the maximum level of accident prevention that early detection affords, it will be necessary to understand the defect growth process and try to quantify the growth speed to permit economical, non-disruptive replacement of failing components rather than relying on immediate removal upon detection. The study presented here …

Impact Of A Localized Lean Six Sigma Implementation On Overall Patient Safety And Process Efficiency, Luvianca Gil, Pilar Pazos, Mamadou Seck, Rolando Delaguila

Engineering Management & Systems Engineering Faculty Publications

Continuous quality improvement tools have caught the attention of the Health Care Industry as a solution to process efficiency, patient safety and cost reduction. This research explores the impact of a Lean Six Sigma (LSS) process improvement initiative in overall process efficiency and patient safety in two Labor and Delivery (L+D) units of two large hospital providers. This study focuses on the application of modeling and simulation methodology to investigate the influence of a localized process improvement intervention on the overall L+D unit output, by considering patient flow, system capacity and unit performance. The simulation models capacity profiles and patient …