Engineering Commons^™

Design Of Reliable And Secure Network-On-Chip Architectures, Dean Michael B Ancajas

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The trend towards massive parallel computing has necessitated the need for an On-Chip communication framework that can scale well with the increasing number of cores. At the same time, technology scaling has made transistors susceptible to a multitude of reliability issues. This dissertation demonstrates design techniques that address both reliability and security issues facing modern NoC architectures. The reliability and security problem is tackled at different abstraction levels using a series of schemes that combine information from the architecture-level as well as hardware-level in order to combat aging effects and meet secure design stipulations while maintaining modest power-performance overheads.

The Design And Testing Of A Three-Degree-Of-Freedom Small Satellite Simulator Using A Linear Controller With Feedback Linearization And Trajectory Generation, Marina A. Samuels

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

A small satellite simulator with attitude determination and control was designed and implemented in hardware. The simulator consists of inertial sensors for attitude determination and a pyramidal four-wheel momentum exchange system as the control actuators. A linearized PV controller with trajectory generation and feedback linearization was implemented, with the focus on controlling yaw. The simulator was tested on a spherical air bearing platform to allow three-degree-of-freedom operation. The simulator software was developed to read measurements from the sensors, apply the control algorithm, and send commands to the actuators. A data processing routine was developed. Electromechanical testing for the system as …

Labyrinth Weirs: A Look Into Geometric Variation And Its Effect On Efficiency And Design Method Predictions, Tyler Robert Seamons

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The rehabilitation of dams often requires spillway capacity upgrades. Replacing a less hydraulically efficient linear weir with a labyrinth weir can be an effective way to increase discharge efficiency (discharge at a given upstream head) for a fixed-width channel. Labyrinth weirs are linear weirs folded in plan view to increase total spillway crest length (which in turn increases discharge efficiency within a channel). Labyrinth weirs potentially have limitless geometric configurations. This study was performed to analyze the effects of varying certain geometric parameters on discharge efficiency and design method predictions.

Due to limited cross-sectional flow area near the upstream apex, …

The Design And Implementation Of The Dynamic Ionosphere Cubesat Experiment (Dice) Science Instruments, Steven Reed Burr

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Dynamic Ionosphere Cubesat Experiment (DICE) is a cubesat satellite project funded by the National Science Foundation (NSF) to study the ionosphere. Cubesats are small satellites in the shape of a cube around 10cm on a side, and allow better access to space. Three main properties of the ionosphere are measured by the DICE mission, which are electric field, magnetic field, and plasma density with an instrument for each. The limitation of power, mass, and volume contributes to the difficulty of cubesat design. Mission and instrumentation requirements must be carefully planned to ensure mission success. Each instrument’s requirements and design are …

Investigation Of The Design And Static Behavior Of Cylindrical Tubular Composite Adhesive Joints Utilizing The Finite Element Method And Stress-Based Failure Theories, Michael D. Lambert

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The stress and strength behavior of cylindrical tubular adhesive joints composed of dissimilar materials was explored. This was accomplished with the finite element method (FEM) and stress-based failure theories. Also, it was shown how a design of experiments (DOE) based method can be used to objectively organize the process of optimizing joint strength by using stress-based failure criteria.

The finite element program used in this work was written in-house from scratch to implement the FEM for the purpose of solving both axisymmetric and three-dimensional linear elastic governing equations of static equilibrium. The formulation of the three-dimensional model is presented, and …

Comparative Studies On Oxygen Mass Transfer For The Design And Development Of A Single-Use Fermentor, Kristan L. Sorenson

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Accurate experimental oxygen mass transfer coefficient, a measure of how quickly oxygen travels from a gas bubble to the bulk liquid, is important for comparing performance and for evaluating the oxygen transfer capability of a fermentor. Delays in probe response and changing gas volumes upon start-up of gassing affect the accuracy of oxygen transfer measurements. To mitigate these inaccuracies, a standard correction procedure for oxygen mass transfer data was established for highly oxygenated, well-mixed fermentation systems. Probe response time correction was generated by applying a second-order response model to dissolved oxygen probes and shown to be effective within 4%. By …

Develop Design Data On Pressure Loss Of Large Pipe Fittings, Patrick Dent

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Pressure loss coefficients were determined for large radius ells, large concentric pipe reducers, and expansions, as well as large pipe tees. The fittings tested were 12, 16, 20, and 24 inch forged steel weld. Forty individual fittings from four different manufacturers were tested to determine loss coefficient values. Each test fitting was examined at a specified range of pipe velocities to determine mean and variation of loss coefficients. Tees were also examined for mean and variation of loss coefficients over a range of flow distributions.

Currently no data exists for pipe fittings of these larger diameters. This study will provide …

Design And Evaluation Of Stepped Spillways For High Dams, Jeffrey Scott Rau

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

The purpose of this research was to investigate the hydraulic performance of stepped spillways. A thorough investigation was made of all printed material on stepped spillways, and a summary of this material is presented in the text. Data from experiments in the laboratory were used to develop a design procedure for stepped spillways and hydraulic jump stilling basins. The experimental study was conducted at Utah State University - Utah Water Research Laboratory in Logan, Utah. Four models were built and tested in the laboratory under various flowrates.

The crest of the model spillway was constructed in the shape of a …

Design Criteria For Usu Stilling Basin Pipe Flow To Open Channels, Chi-Yuan Wei

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

Criterion have been developed in this study for designing a stilling basin to serve as a transition from pipe flow to open channel flow. The purpose of the structure is to prevent erosion in an open channel. The unsteadiness, or smoothness, of the water surface in the model basin was used as the criterion for evaluating the effectiveness of the structure for energy dissipation.

The introduction of a short-pipe energy dissipater in the stilling basin has proven effective in dissipating energy. The stilling basin was designed for a fully submerged pipe outlet. The inflow pipe and the dissipator pipe were …