Engineering Commons^™

Drop Impact On Dry And Liquid Infused Substrates With Micro-Wells., Ahmed Nazrul Islam

Electronic Theses and Dissertations

Drop impact on different types of surfaces are important physical concepts that are routinely found in day-to-day life and such studies have immense application for various types of industries. One such important application of drop dynamics is in the field of aviation science which is concerned of very large freezing drizzle drops impacting on airplane wings. Such drops are known as supercooled large droplets (SLD), and they pose a great risk and have been long known to have caused notable accidents in the past. SLDs are liquid drops that can remain in the state of liquid phase and grow into …

Design Of A 300cm2 Pemfc Stack With Force And Cfd Simulation To Optimize Flow Channels, Gasket Design, And Clamping Forces., Robert M. Ench

Electronic Theses and Dissertations

Proton exchange membrane fuel cells are important to the future of green energy as hydrogen can be made with green technologies and store energy for later use. Fuel cells can efficiently convert the hydrogen to electricity as needed. This study uses Solidworks simulation to make design improvements to the fuel cell before the prototype build stage of testing; this saves money and time by reducing the prototype builds needed.

In this study, a multi-channel serpentine design with two outlets versus a single outlet is evaluated using CFD to investigate pressure drop. Lower pressure drops are desirable as less energy input …

Refinement And Automation Using Algorithmic Control Of Breathforce, A Respiratory Training System For Patients With Spinal Cord Injuries., Anna Goestenkors

Electronic Theses and Dissertations

Spinal cord injuries (SCI) can lead to impaired respiratory and cardiovascular function and a general decrease in lung compliance. This can complicate breathing as well as impair the ability to sigh, cough, and clear secretions, leading to increased risk of respiratory infections. Respiratory training has been shown to combat these effects. BreathForce is under active development to create a user-centric inspiratory-expiratory device that is an affordable option for at-home training. This study reports on the refinement of valve design and automation incorporated into BreathForce to enhance and enforce clinical practices and processes as part of the respiratory training protocol used …

Cfd Analysis Of Acoustofluidic Channels And The Effects On Biologic Delivery., Zachary T. Long

Electronic Theses and Dissertations

T-cell transformation is an ever-expanding treatment for several types of cancer, with a potential to be adapted to other disorders in which the immune system plays a key role in the pathophysiology. Currently, all FDA approved chimeric antigen receptor (CAR) T-cell cancer therapies rely on transformation via viral transduction. However, viral transduction is plagued by poor consistency and the potential to create adverse immune reactions when T-cells are reintroduced into a patient. Other transformation methods are being explored, with an alternative called acoustofluidic sonoporation showing promise. In these procedures, cells are passed through a channel, of the millimeter scale, while …

Numerical Investigation Of Coalescence-Induced Self-Propelled Behavior Of Droplets On Non-Wetting Surfaces And Wedged Surfaces., Yan Chen

Electronic Theses and Dissertations

When small drops coalesce on a superhydrophobic surface, the merged drop can jump away from the surface due to the surface energy released during the coalescence. This self-propelled behavior has been observed on various superhydrophobic surfaces and has potential applications in areas related to the heat and mass transfer, such as heat exchangers, anti-icing and anti-frost devices, thermal management and water harvesting. The jumping velocity model was obtained based on published experimental data and the balance of various energy terms described in previous studies. However, the self-propelled mechanism is still not fully understood. In this study, the self-propelled droplet phenomenon …

Comparing Stenotic Blood Flow In Three- And Two-Dimensional Arterial Renderings Using Computational Fluid Dynamics And Multiphase Mean Age Theory., Jacob S. Garza

Electronic Theses and Dissertations

Over one million invasive coronary angiography procedures are performed annually in patients who experience chest pain or are known to have coronary artery disease. The procedure is carried out to ascertain the degree of arterial blockage (stenosis) that hinders blood flow to the heart. A cardiologist performing the procedure determines the physiological degree of a stenosis by either visual estimation, which is routine practice, or by invasively measuring fractional flow reserve (FFR), which is the current gold standard that has been demonstrated to improve patient outcomes and temper the cost of healthcare. Nevertheless, FFR is performed in only 10–20% of …

A Comparison Of Mean Age Theory And Residence Time Distributions In Mixed Systems., Nolan Theaker

Electronic Theses and Dissertations

A comparison between mean age theory and conventional residence time distributions over a range of quantified mixing levels was conducted using computational fluid dynamics (CFD). The system was a stirred tubular reactor. The model was validated by comparing computationally derived RTD curves with experimentally obtained RTD curves, with quantified differences less than 3%. Mixing was quantified using the Tanks-in-Series model. Mixing levels were set by varying flow rate and impeller rpm. Mean age distributions at the outlet, where experimental RTD’s were measured, were very narrow for all levels of mixing studied. RTD’s showed expected characteristics; a wider distribution and long …

Heat Transfer Mechanisms In Water-Based Nanofluids., Masoudeh Ahmadi

Electronic Theses and Dissertations

Nanofluids are a class of heat transport fluids created by suspending nano-scaled metallic or nonmetallic particles into a base fluid. Some experimental investigations have revealed that the nanofluids have remarkably higher thermal conductivities than those of conventional pure fluids and are more suited for practical application than the existing techniques of heat transfer enhancement using millimeter and/or micrometer-sized particles in fluids. Use of nanoparticles reduces pressure drop, system wear, and overall mass of the system leading to a reduction in costs over existing enhancement techniques. In this work, the heat transfer coefficient is determined experimentally using copper oxide (CuO) based …

Application Of The Aeroacoustic Analogy To A Shrouded, Subsonic, Radial Fan., Bryan Buccieri

Electronic Theses and Dissertations

A study was conducted to investigate the predictive capability of computational aeroacoustics with respect to a shrouded, subsonic, radial fan. A three dimensional unsteady fluid dynamics simulation was conducted to produce aerodynamic data used as the acoustic source for an aeroacoustics simulation. Two acoustic models were developed: one modeling the forces on the rotating fan blades as a set of rotating dipoles located at the center of mass of each fan blade and one modeling the forces on the stationary fan shroud as a field of distributed stationary dipoles. Predicted acoustic response was compared to experimental data. The blade source …

Cfd Modeling Of Entrance And Exit Geometries Of A Wind Speed Accelerator., David Russ

Electronic Theses and Dissertations

Current wind power technology is not economically feasible throughout most of the United States due to low average wind speeds. A design for a small-scale wind concentrator device suitable for use in areas of low wind velocity was tested using computational fluid dynamics (CFD). Using a novel approach, the device seeks to accelerate incoming air above minimum velocities required for economical power generation. The novel approach employs a funnel shaped inlet with relief vents along the circumference, so as to alleviate backpressure. Both inlet and outlet sections utilize funnel shapes with both parabolic and hyperbolic regions. All geometry and mesh …