Engineering Commons^™

Investigation Of Negative Refractive Index In Reciprocal Chiral Materials, Monish Ranjan Chatterjee, Partha P. Banerjee, Pradeep R. Anugula

Electrical and Computer Engineering Faculty Publications

It is well known that there exist both natural materials (such as milk or sugar solution) possessing chiral (or handed) properties, as well as an increasing list of man-made materials (such as sodium bromate) that exhibit chirality. One of the principal properties of chirality is that light of any arbitrary polarization, when propagating through a chiral material, splits up into two circular polarizations propagating in different directions. In the past decade or longer, researchers have investigated electromagnetic transverse (plane) wave propagation across a non-chiral/chiral interface, and determined the electromagnetic Fresnel coefficients for such propagation. Traditionally, such coefficients are derived under …

Energy Efficient Process Heating: Managing Air Flow, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Much energy is lost through excess air flow in and out of process heating equipment. Energy saving opportunities from managing air flow include minimizing combustion air, preheating combustion air, minimizing ventilation air, and reconfiguring openings to reduce leakage.

This paper identifies these opportunities and presents methods to quantify potential energy savings from implementing these energy-savings measures. Case study examples are used to demonstrate the methods and the potential energy savings.The method for calculating savings from minimizing combustion air accounts for improvement in efficiency from increased combustion temperature and decreased combustion gas mass flow rate.

The method for calculating savings from …

Measuring Plant-Wide Energy Savings, J. Kelly Kissock, Carl Eger

Mechanical and Aerospace Engineering Faculty Publications

This paper presents a general method for measuring plant-wide industrial energy savings and demonstrates the method using a case study from an actual industrial energy assessment. The method uses regression models to characterize baseline energy use. It takes into account changes in weather and production, and can use sub-metered data or whole plant utility billing data. In addition to calculating overall savings, the method is also able to disaggregate savings into components, which provides additional insight into the effectiveness of the individual savings measures.

Although the method incorporates search techniques and multi-variable least-squares regression, it is easily implemented using data …

Energy Efficient Process Heating: Insulation And Thermal Mass, Kevin Carpenter, J. Kelly Kissock

Mechanical and Aerospace Engineering Faculty Publications

Open tanks and exterior surfaces of process heating equipment lose heat to the surroundings via convection, radiation, and/or evaporation. A practical way of reducing heat loss is by insulating or covering the surfaces. This paper presents methods to quantify heat loss and energy savings from insulating hot surfaces and open tanks. The methods include radiation and evaporation losses, which are ignored by simplified methods. In addition, thermal mass, such as refractory, conveyor and racking equipment, acts as a heat sink and increases heating energy use in process heating applications. This paper presents lumped capacitance and finite-difference methods for estimating heat …

Control Of Plasma Flux Composition Incident On Tin Films During Reactive Magnetron Sputtering And The Effect On Film Microstructure, Christopher Muratore, Scott G. Walton, Darrin Leonhardt, Richard F. Fernsler

Chemical and Materials Engineering Faculty Publications

A hybrid plasma enhanced physical vapor deposition (PEPVD) system consisting of an unbalanced dc magnetron and a pulsed electron beam-produced plasma was used to deposit reactively sputtered titanium nitride thin films. The system allowed for control of the magnitudes of the ion and neutral flux, in addition to the type of nitrogen ions (atomic or molecular) that comprised the flux. For all deposition experiments, the magnitude of the ion flux incident on the substrate was held constant, but the composition of the total flux was varied. X-ray diffraction and atomic force microscopy showed that crystallographic texture and surface morphology of …

Pocket Deformable Mirror For Adaptive Optics Applications, Leonid A. Beresnev, Mikhail Vorontsov, Peter Wangsness

Electrical and Computer Engineering Faculty Publications

Adaptive/active optical elements are designed to improve optical system performance in the presence of phase aberrations. For atmospheric optics and astronomical applications, an ideal deformable mirror should have sufficient frequency bandwidth for compensation of fast changing wave front aberrations induced by either atmospheric turbulences or by turbulent air flows surrounding a flying object (air optical effects). In many applications, such as atmospheric target tracking, remote sensing from flying aircraft, boundary layer imaging, laser communication and laser beam projection over near horizontal propagation paths the phase aberration frequency bandwidth can exceed several kHz. These fast-changing aberrations are currently compensated using relatively …

Adaptive Beam Director For A Tiled Fiber Array, Mikhail Vorontsov, Jim F. Riker, Ernst Polnau, Svetlana Lachinova, Venkata S. Rao Gudimetla

Electrical and Computer Engineering Faculty Publications

We present the concept development of a novel atmospheric compensation system based on adaptive tiled fiber array architecture operating with target-in-the-loop scenarios for directed beam applications. The adaptive tiled fiber array system is integrated with adaptive beam director (ABD). Wavefront control and sensing functions are performed directly on the beam director telescope primary mirror. The beam control of the adaptive tiled fiber array aims to compensate atmospheric turbulence-induced dynamic phase aberrations and results in a corresponding brightness increase on the illuminated extended object. The system is specifically designed for tiled fiber system architectures operating in strong intensity scintillation and speckle-modulation …

Intracellular Signaling Networks In The Immune Response: Pathways Activated By Interleukin-2 And-4 Receptors And Their Roles In T Cell Proliferation, Kristen K. Comfort

Chemical and Materials Engineering Faculty Publications

Cells sense and respond to chemical and physical stimuli through signal transduction pathways, which mediate cell proliferation, differentiation, migration, and survival. The cytokines interleukin-2 (IL-2) and interleukin-4 (IL-4) are key regulators of the adaptive immune system, particularly influencing the clonal expansion and differentiation of T cells. At least in culture, both synergistic and antagonistic effects of IL-2 and -4 co-stimulation have been reported; the antagonism, when observed, is thought to arise from the utilization of a common subunit shared by IL-2 and IL-4 receptors. We have sought to characterize IL-2 and IL-4 signaling at the level of intracellular pathways activated …

The Girl Scout Climbing Wall Multidisciplinary Service-Learning Project, Margaret Pinnell, Corinne M. Daprano, Gabrielle Williamson

Mechanical and Aerospace Engineering Faculty Publications

The Girl Scout Wall (GS Wall) project was implemented in two classes at the University of Dayton (UD): a Mechanical and Aerospace Engineering (MAE) course, and a Health and Sports Science (HSS) course, and Sport Facility Management. The MAE course, Introduction to Materials, is a three-credit, third-year required course where students learn about the basic structure and properties of materials as well as the principles of material selection. The Sport Facility Management course is a three-semester hour, required HSS course where students are introduced to the processes of planning, constructing, equipping, maintaining, and managing sport facilities.

Enhanced Cerenkov Second-Harmonic Generation In Patterned Lithium Niobate, Cong Deng, Joseph W. Haus, Andrew Sarangan, Aziz Mahfoud, Concita Sibilia, Michael Scalora, Aleksei M. Zheltikov

Electro-Optics and Photonics Faculty Publications

We present experimental results of second harmonic generation enhancement through the resonance of the band edge in a photonic crystal based on lithium niobate. Proton exchange technique was used to fabricate a waveguide near the surface of the lithium niobate substrate. The photonic crystal structure over the waveguide was made by UV laser interferometry. Subsequently experiments were designed to quantify the Cerenkov second-harmonic generation (CSHG) radiated into the substrate. The SHG radiated inside the waveguides was also experimentally investigated. In our experiments, the second guided mode of the waveguide was tuned to the band edge resonance to enhance the second …

Galileo Probe, Monish Ranjan Chatterjee

Electrical and Computer Engineering Faculty Publications

The Galileo mission to Jupiter was formally approved by the United States Congress in 1977, several years before the space shuttle Columbia made its maiden flight into Earth orbit. The mission was a cooperative project involving scientists and engineers from the United States, Germany, Canada, Great Britain, France, Sweden, Spain, and Australia. Even though the Voyager 1 and Voyager 2 spacecraft had performed flybys of planet Jupiter and its sixteen moons in 1979, the Galileo mission was envisioned to initiate several novel observations of Jupiter, the most massive gas planet of the solar system, and its principal moons, and conduct …