Engineering Commons^™

The Ejection Of Large Non-Oscillating Droplets From A Hydrophobic Wedge In Microgravity, Logan Torres, Mark M. Weislogel

Mechanical and Materials Engineering Faculty Publications and Presentations

When confined within containers or conduits, drops and bubbles migrate to regions of minimum energy by the combined effects of surface tension, surface wetting, system geometry, and initial conditions. Such capillary phenomena are exploited for passive phase separation operations in micro-fluidic devices on earth and macro-fluidic devices aboard spacecraft. Our study focuses on the migration and ejection of large inertial-capillary drops confined between tilted planar hydrophobic substrates (a.k.a., wedges). In our experiments, the brief nearly weightless environment of a 2.1 s drop tower allows for the study of such capillary dominated behavior for up to 10 mL water drops with …

The Draining Of Capillary Liquids From Containers With Interior Corners Aboard The Iss, Joshua Thomas Mccraney, Mark M. Weislogel, Paul Steen

Mechanical and Materials Engineering Faculty Publications and Presentations

In this work, we analyze liquid drains from containers in effective zero-g conditions aboard the International Space Station (ISS). The efficient draining of capillary fluids from conduits, containers, and media is critical in particular to high-value liquid samples such as minuscule biofluidics processing on earth and enormous cryogenic fuels management aboard spacecraft. The amount and rate of liquid drained can be of key concern. In the absence of strong gravitational effects, system geometry, and liquid wetting dominate capillary fluidic behavior. During the years 2010–2015, NASA conducted a series of handheld experiments aboard the ISS to observe “large” length scale capillary …

Openfoam Simulations Of Late Stage Container Draining In Microgravity, Joshua Thomas Mccraney, Mark M. Weislogel, Paul Steen

Mechanical and Materials Engineering Faculty Publications and Presentations

In the reduced acceleration environment aboard orbiting spacecraft, capillary forces are often exploited to access and control the location and stability of fuels, propellants, coolants, and biological liquids in containers (tanks) for life support. To access the ‘far reaches’ of such tanks, the passive capillary pumping mechanism of interior corner networks can be employed to achieve high levels of draining. With knowledge of maximal corner drain rates, gas ingestion can be avoided and accurate drain transients predicted. In this paper, we benchmark a numerical method for the symmetric draining of capillary liquids in simple interior corners. The free surface is …

Passive Separation Of Binary Fluid Mixtures In Microchannels Using Lattice Boltzmann Method, Mohanad Kamil Radhi

Dissertations and Theses

Fluid mixtures in real life exist in two forms: miscible and immiscible. Separation of these mixtures using chemical agents or thermal energy has both environmental and economic disadvantages. The high cost and the environmental damage caused by the traditional separation techniques have stimulated both academia and industry to seek alternatives. The emergence of microfluidics offers robust solutions for a broad span of transport problems due to the high surface to volume ratio and reduced length scales. Particularly, the separation efficiency increases significantly due to the aforementioned feature. However, there is still a pressing need of passive separations for the sake …

Jet Bounce In Low Gravity, Caleb Turner

Undergraduate Research & Mentoring Program

Liquid jets rebound (‘bounce’) from superhydrophobic surfaces when they impinge at oblique angles. We call this interesting phenomena ‘jet bounce’ and in this work we investigate the phenomena at large length scales in a reduced gravitational environment. For example, for water at Reynolds numbers 0 < Re < 3500 and surface normal Weber numbers 0 < We < 60 we characterize the response of the jets on the hydrophobic surface in the brief 2.1s micro-gravity environment achieved using a drop tower. It is observed that by varying jet velocity, flow rate, jet diameter, and incident angle we observe up to four distinct regimes of behavior. The various regimes may be targeted for specific applications and we demonstrate a variety of unique jet bounce behaviors for applications such as no-touch, no-contact fluid-thermal transport for spacecraft unit operations such as contaminated water processing, device cooling, and cryogenic fluids transport and management.

Stable jet bounce from small diameter jet ≈ 1 mm and low impact angle. Characterizing Reynolds number ≈ 900 and normal Weber number ≤ 10 allow jet bounce to rebound in non-destructive behavior.

Puddle Jumping: Spontaneous Ejection Of Large Liquid Droplets From Hydrophobic Surfaces During Drop Tower Tests, Babek Attari, Mark M. Weislogel, Andrew Paul Wollman, Yongkang Chen, Trevor Snyder

Mechanical and Materials Engineering Faculty Publications and Presentations

Large droplets and puddles jump spontaneously from sufficiently hydrophobicsurfaces during routine drop tower tests. The simple low-cost passive mechanism can in turn be used as an experimental device to investigate dynamic droplet phenomena for drops up to 104 times larger than their normal terrestrial counterparts. We provide and/or confirm quick and qualitative design guides for such “drop shooters” as employed in drop tower tests including relationships to predict droplet ejection durations and velocities as functions of drop volume, surface texture, surface contour, wettability pattern, and fluid properties including contact angle. The latter is determined via profile image comparisons with numerical …

More Investigations In Capillary Fluidics Using A Drop Tower, Andrew Paul Wollman, Mark M. Weislogel, Brentley M. Wiles, Donald Pettit, Trevor Snyder

Mechanical and Materials Engineering Faculty Publications and Presentations

A variety of contemplative demonstrations concerning intermediate-to-large length scale capillary fluidic phenomena were made possible by the brief weightless environment of a drop tower (Wollman and Weislogel in Exp Fluids 54(4):1, 2013). In that work, capillarity-driven flows leading to unique spontaneous droplet ejections, bubble ingestions, and multiphase flows were introduced and discussed. Such efforts are continued herein. The spontaneous droplet ejection phenomena (auto-ejection) is reviewed and demonstrated on earth as well as aboard the International Space Station. This technique is then applied to novel low-g droplet combustion where soot tube structures are created in the wakes of burning drops. …

Analysis Of Capillary Flow In Interior Corners : Perturbed Power Law Similarity Solutions, Joshua Thomas Mccraney

Dissertations and Theses

The design of fluid management systems requires accurate models for fluid transport. In the low gravity environment of space, gravity no longer dominates fluid displacement; instead capillary forces often govern flow. This thesis considers the redistribution of fluid along an interior corner. Following a rapid reduction of gravity, fluid advances along the corner measured by the column length z = L(t), which is governed by a nonlinear partial differential equation with dynamical boundary conditions. Three flow types are examined: capillary rise, spreading drop, and tapered corner. The spreading drop regime is shown to exhibit column length growth L ~ …

Silk Cryogels For Microfluidics, Christopher David Hinojosa

Dissertations and Theses

Silk fibroin from silkworm cocoons is found in numerous applications ranging from textiles to medical implants. Its recent adoption as a biomaterial is due to the material's strength, biocompatibility, self-assembling behavior, programmable degradability, optical clarity, and its ability to be functionalized with antibodies and proteins. In the field of bioengineering it has been utilized as a tissue scaffolding, drug delivery system, biosensor, and implantable electrode. This work suggests a new application for porous silk in a microscale chromatography column. We demonstrate in situ cryotropic polymerization of highly porous structures in microscale geometries by freezing aqueous silk with a solvent. The …

Quasi-Steady Capillarity-Driven Flows In Slender Containers With Interior Edges, Mark M. Weislogel, J. Alex Baker, Ryan M. Jenson

Mechanical and Materials Engineering Faculty Publications and Presentations

In the absence of significant body forces the passive manipulation of fluid interfacial flows is naturally achieved by control of the specific geometry and wetting properties of the system. Numerous 'microfluidic' systems on Earth and 'macrofluidic' systems aboard spacecraft routinely exploit such methods and the term ‘capillary fluidics’ is used to describe both length-scale limits. In this work a collection of analytic solutions is offered for passive and weakly forced flows where a bulk capillary liquid is slowly drained or supplied by a faster capillary flow along at least one interior edge of the container. The solutions are enabled by …

Capillary-Driven Flows Along Rounded Interior Corners, Yongkang Chen, Mark M. Weislogel, Cory L. Nardin

Mechanical and Materials Engineering Faculty Publications and Presentations

The problem of low-gravity isothermal capillary flow along interior corners that are rounded is revisited analytically in this work. By careful selection of geometric length scales and through the introduction of a new geometric scaling parameter Tc, the Navier–Stokes equation is reduced to a convenient∼O(1) form for both analytic and numeric solutions for all values of corner half-angle α and corner roundedness ratio λ for perfectly wetting fluids. The scaling and analysis of the problem captures much of the intricate geometric dependence of the viscous resistance and significantly reduces the reliance on numerical data compared with several previous solution methods …