Open Access. Powered by Scholars. Published by Universities.®
Articles 1 - 5 of 5
Full-Text Articles in Engineering
Mixed Electron Emission From Lead Zirconate-Titanate Ceramics, Weiming Zhang, Wayne Huebner, Stephen E. Sampayan, Mike L. Krogh
Mixed Electron Emission From Lead Zirconate-Titanate Ceramics, Weiming Zhang, Wayne Huebner, Stephen E. Sampayan, Mike L. Krogh
Materials Science and Engineering Faculty Research & Creative Works
Simultaneous ferroelectric and plasma emission from Pb(Zr,Ti)O3 was observed with only a negative driving pulse applied to the sample, and without an extraction potential on the electron collector. Plasma emission was a strong, inconsistent, and self-destructive process. In addition, a positive ion current was detected. Comparatively, ferroelectric emission was a relatively stable self-emission process, exhibiting no apparent delay time, and no positive ion current. The relationship between the switching and emission current of ferroelectric samples measured simultaneously cannot only be used to determine the existence of ferroelectric emission, but can also give direction to choosing suitable ferroelectric materials for …
A Study Of The Sintering Mechanism Of Pzt-Based Piezoceramics, Wayne Huebner, Pei Wen Lu, Wanrong Xue
A Study Of The Sintering Mechanism Of Pzt-Based Piezoceramics, Wayne Huebner, Pei Wen Lu, Wanrong Xue
Materials Science and Engineering Faculty Research & Creative Works
The densification behavior a PZT-based composition with additions of BiFeO3 as a flux was studied. Two different PZT powders were studied with varying initial particle sizes. Results clearly showed that BiFeO3 forms a low temperature liquid that aids in the densification behavior, with 3 mole% being optimum. Fine particle sizes substantially improved the density at low temperatures, with the net result that ceramics could be densified in air without the aid of a lead source. The corresponding electromechanical properties were typical of a hard PZT formulation.
Correlation Of Wettability And Interfacial Reaction To The Densification And Dielectric Properties Of Fluxed-Batio₃, Sea-Fue Wang, Wayne Huebner, Joseph P. Dougherty
Correlation Of Wettability And Interfacial Reaction To The Densification And Dielectric Properties Of Fluxed-Batio₃, Sea-Fue Wang, Wayne Huebner, Joseph P. Dougherty
Materials Science and Engineering Faculty Research & Creative Works
Reducing the sintering temperature of BaTiO3 has typically been achieved through the use of a fluxing agent to promote densification by liquid phase sintering. Liquid phase formation in these systems is due either to the melting of the flux or to the formation of a eutectic liquid between the flux and BaTiO3. In this paper, the correlation between the wettability and interfacial reactions between fluxes and BaTiO3 with respect to the densification behavior associated with liquid phase sintering, and the resulting dielectric properties is presented. Fluxes used in this study include 5ZnO*2B2O3, 5CdO*2SiO2, Pb5Ge3O11, CuO*TiO2, 3Bi2O3*B2O3, and LiF.
Processing And Characterization Of Samarium And Manganese Modified Lead Titanate Thin Film, Chen-Lung Fan, Wayne Huebner
Processing And Characterization Of Samarium And Manganese Modified Lead Titanate Thin Film, Chen-Lung Fan, Wayne Huebner
Materials Science and Engineering Faculty Research & Creative Works
Samarium and manganese modified lead titanate thin films were fabricated by spin-coating an amorphous citrate precursor. These films transformed into an oxide film upon heat treatment at 400 degrees Celcius or above. Relatively large area and crack-free thin films could be obtained by this process both easily and inexpensively. The rheological behavior of the precursor solution, as well as its thermal decomposition and phase development were studied by means of DSC/TGA and XRD. The thickness and grain size of the oxide film were examined by TEM and SEM.
Grain Size Effect On The Induced Piezoelectric Properties Of 0.9pmn-0.1pt Ceramic, U. Kumar, Wayne Huebner, P. Marsh, H. Kankul, S. F. Wang, Clyde G. Oakley
Grain Size Effect On The Induced Piezoelectric Properties Of 0.9pmn-0.1pt Ceramic, U. Kumar, Wayne Huebner, P. Marsh, H. Kankul, S. F. Wang, Clyde G. Oakley
Materials Science and Engineering Faculty Research & Creative Works
Lead magnesium niobate-lead titanate (Pb(Mg1/3Nb2/3)O3 - PbTiO3 (PT) solid solutions have been widely researched to produce devices that can be used in low- and high-electric-field applications. For some applications, such as medical ultrasonic transducers, it is necessary to prepare the ceramic with high density and small average grain size. The effect of grain size on the low- and high-field properties of 0.9-PMN-0.10-PT ceramics is described in the present work. To prepare highly dense ceramic, vibratory and attrition milled powders were sintered between 1000 and 1250 ⁰C. The average grain sizes of the sintered ceramics …