Engineering Commons^™

Streaming Mysql Database Activity To Aws Kinesis, Chris I. Voncina

Computer Engineering

Connecting Amazon RDS MySQL engine with AWS Kinesis is a feature that RDS customers have often requested. A good example indicating customer demand is demonstrated on AWS’ forum post at https://forums.aws.amazon.com/thread.jspa?messageID=697516.

Upon completion, my project will enable Amazon RDS to pick up the MySQL open source project, integrate the MySQL plugin with Amazon RDS MySQL and deliver this feature to Amazon RDS MySQL customers. Other open source engine projects can follow and build upon my project.

Amazon Aurora delivered similar capability to the project. See details at https://aws.amazon.com/about-aws/whats-new/2016/10/amazon-aurora-new-features-aws-lambda-integration-and-data-load-from-amazon-s3-to-aurora-tables/

Real Time And High Fidelity Quadcopter Tracking System, Tyler Mckay Hall

Computer Engineering

This project was conceived as a desired to have an affordable, flexible and physically compact tracking system for high accuracy spatial and orientation tracking. Specifically, this implementation is focused on providing a low cost motion capture system for future research. It is a tool to enable the further creation of systems that would require the use of accurate placement of landing pads, payload acquires and delivery. This system will provide the quadcopter platform a coordinate system that can be used in addition to GPS.

Field research with quadcopter manufacturers, photographers, agriculture and research organizations were contact and interviewed for information …

Solutions And Findings Of The San Diego Homeless Paradox, Devon A. Nicklas

Construction Management

There is no question that San Diego is facing a chronic problem of their increasing homeless population. According to HUD, the homeless count as of January 2016 reached a high of 9,116 homeless people in San Diego County. Oddly enough, the city of San Diego reports that the city has seen an increase in new construction by 3.2% over the past several years and expects to see an increase of new construction as high as 12.9% by 2017. This draws the question of why there is still an increasing amount of homeless when so much new construction is underway, and …

Certifications In The Construction Industry: A Look Into Industry Standards, Shawn T. Pacaoan

Construction Management

Becoming certified in various areas of construction is a task that requires completing rigorous courses to become more knowledgeable and give those the tools to succeed in a certain path within construction. Having a multitude of certifications diversifies your portfolio, and strengthens your resume but acquiring multiple certifications can be a very expensive and time-consuming task. Is the time commitment and expenses worth it? By the end of this paper students will finally know the answer to a question they have always been asking, “Do construction certifications actually better your chances to get a job?” Since there are numerous certifications …

Pubwc Bathroom Review App, Clay Jacobs

Computer Science and Software Engineering

For my senior project, I developed an iOS application to allow users to find, rate, and review nearby public restrooms. The app takes advantage of crowdsourced data to collect bathroom and review information. I also created a REST API to interface with the backend database that could be used to port the application to other platforms.

Poly Spotlight Control, Ryan P. O'Neill, C. Oleg Frandle, Anthony T. Lombardi

Mechanical Engineering

When this project began, The Cambria Center for the Arts Theater used a manually-operated spotlight. The sound created by the fans, along with the sheer size of the spotlight, required that it be housed in an attic room above the theater and shined through a closed window. This trapped a lot of heat in the room and involved some risk with climbing into and out of the attic room. This project sought to remedy those issues by mounting a pair of newer LED spotlights inside the theater. Doing this required a method for remotely controlling and actuating the angular position …

Portable 6 Lead 4 Electrode Ekg, Cody Magnuson, Wes Archbold

Electrical Engineering

This project focused on designing a small, portable, 6 lead 4 electrode electrocardiogram (EKG) machine with enough accuracy and resolution to successfully diagnose clinical issues. The electrical design used to measure signals originating from the heart can be broken up into three stages. The first stage is the human device interface. Next, is the analog block that filters out common mode noise and conditions the signal for digital encoding using instrumentation amplifiers, a right leg circuit, high pass, low pass, and an amplifier. This circuit filters all frequencies above and below the frequency band of meaningful data (1-160Hz), rejects signals …

Dc-To-Dc Buck Converter, Kyle Christopher Roman

Electrical Engineering

The growth of sustainable energy requires many components to work in harmony creating one efficient and effective system. Sustainable energy generation that produces a DC current varying in voltage requires a subsystem to convert voltage to a practical and usable value. The DC to DC Buck converter converts high DC solar generated voltage to a 12V output. This Modular -Level power electronic (MLPE) device performs as a solar charge controller for small lithium ion batteries. Fluctuating voltage levels generated by Photovoltaic cells makes the solar controller a critical part of the solar system. Regulating the DC voltage allows safe and …

Dual Method Headphone Amplifier, Joseph S. Gross, Timothy P. Murphy

Electrical Engineering

Many high impedance headphones underperform their full potential when directly connected to the audio source. Amplifiers boost the audio signal and provide the headphones with sufficient power to ensure their maximum performance. The invention of transistors caused vacuum tube implementation to decline, leaving many audiophiles unsatisfied with the transistor’s sound signature. Vacuum tubes and transistors both amplify signals, however the distinct “tube sound” has vanished.

We have designed and created a product where the user selectively switches between solid-state transistor and tube amplification to compare the sound signatures of each amplification method. The ability to switch between the solid-state and …

Flexible Custom Electric Skateboard, Caleb Adam Kelsay

Electrical Engineering

At Cal Poly traveling long distances only accessible by foot such as across campus or from the car park to class can be tiring and time-consuming. While not physically demanding, the trek consumes time in our tight college life schedule. To improve our time efficiency this project provides a relatively lightweight, powered solution to quickly and effectively travel long distances while maintaining full control and safety even on hills, a current limitation of traditional skateboards.

This electric skateboard includes the battery capacity to travel all around campus on a single charge with a compact and flexible skateboard design that provides …

Best Practices For Preparing For The Reno Commercial Problem, Cole Range

Construction Management

The ASC Region 7 Commercial competition is one of the largest and most popular student competition in the country. Students from some of the most prestigious construction management and construction engineering schools compete in a rigorous eighteen hour competition. These teams have around 6 months to prepare for the competition. Their preparation methods have a significant impact on how they place in the competition. The amount of time spent with the teams industry sponsor, number of practice problems completed, hours spent practicing, number of team bonding events, and many other factors contribute to the team’s success. Many of the schools …

Best Practices And Applications Of 3d Printing In The Construction Industry, Jake Kidwell

Construction Management

The construction industry is constantly looking for new ways to improve project efficiency and profitability. Many new technologies such as Business Information Modeling (BIM) programs, and project management software have been introduced to aid in preconstruction and on site coordination. However, traditional building methods have remained relatively unchanged for decades. 3D printing (3DP) is a promising new technology that has the potential to not only be an effective means of increasing project efficiency and profitability in the field, but also have positive environmental impacts. However, as it exists today, this technology is highly limited by size, material, skilled labor, and …

Case Study On Student Competence In Construction Surveying And Layout, Dejah Hilliard

Construction Management

The Cal Poly San Luis Obispo Construction Management (CM) curriculum requires its students to enroll in BRAE 239, a course that educates students on field surveying using equipment such as a total station and an automatic optical level (builder’s level). The class focuses on how to use the specified equipment to calculate distances, heights, and angles over fixed benchmarks to create labeled contour maps and land plot diagrams. The information and methods of calculation are taught in a classroom, and the physical surveying with the provided equipment is done in the agricultural field on campus. The course does touch on …

Forney Residence Accessory Dwelling Unit, Nicholas J. Zygutis

Construction Management

This project involves the project management of a proposed 1,000 square foot accessory dwelling unit that is to be constructed in Alamo, California. The objective is to provide the necessary and efficient means of construction in order to properly establish this unit from conception to permitting. This has been done by obtaining all necessary paperwork, forms, and stamp approvals needed to allow for groundbreaking. The design of the project includes the basic pre-construction activities required to obtain an issued building permit such as collecting bids from architects, working with the client, obtaining plans, developing an adequate schedule and cost estimate, …

Devcon's In-House Design Department Benefiting Their Construction Process: A Case Study, Neeka M. Nazhand

Construction Management

Devcon Construction Inc. is a general contracting company that implements a design department in-house to aid them with their design-build projects. Since their doors opened in 1976, Devcon has imbedded an in-house design department that now delegates about twenty-five percent of their design-build projects, and acts as a resource center for their other construction projects. Having this unique design department benefits both the design and construction side of projects, because working for the same company motivates the teams to work together and solve problems faster. The design department is not for direct profit and only works with Devcon’s contractors, mainly …

Fire And Life Safety Analysis Of The Production Facility (Pf)- 870, Nolan Baker

Fire Protection Engineering: Culminating Experience Project Reports

The purpose of the fire and life-safety analysis was to perform a prescriptive-based and performance based analysis on the fire and life safety systems in the Production Facility (PF) at Sandia National Laboratories (SNL). The prescriptive-based analysis determined if the building met applicable code requirements for existing life safety systems. The performance-based analysis consisted of a series of fire scenarios to ensure the fire and life safety systems allowed adequate egress time for occupants in the event of a fire. The prescriptive-based analysis was based on the Life Safety Code (LSC) and the International Building Code (IBC). The occupancy of …

Sandia National Laboratories' Building 858/North Fabrication Facility, Daniel Garcia

Fire Protection Engineering: Culminating Experience Project Reports

In this report, a fire protection and fire hazard analysis has been performed on a semi- conductor facility, abbreviated as the Fab, located on Kirtland Air Force Base in Albuquerque, New Mexico. The Fab is part of the MESA complex which is operated by the NTESS Corporation for the Department of Energy (DOE) at Sandia National Laboratories. The prescriptive analysis of this report addresses the various fire protection systems in the facility such as fire suppression, and fire alarm. The prescriptive analysis is based on national codes and standards from the National Fire Protection Association (NFPA) and from the International …

Sex Differences In Collateral Remodeling Following Hindlimb Arterial Occlusion, Laura Burckhardt

Master's Theses

Clinical evidence indicates a higher incidence of peripheral arterial occlusive disease and associated likelihood of critical limb ischemia in women, as well as worse prognosis and decreased survival post myocardial infarction. Therefore, understanding the possible differences in underlying vascular compensation mechanisms is crucial. With arterial occlusions, necrosis and tissue injury can be naturally mitigated by the collateral circulation, improving patient prognosis. Previous sex-comparison studies describing differences in vascular remodeling are inconsistent. Therefore, the aim of this study was to describe the effect of arterial occlusion on collateral remodeling in healthy male and healthy reproductive-stage female mice. At 7 days following …

Thermal-Fluid Dynamic Model Of Luge Steels, Brandon Stell

Master's Theses

Luge is an Olympic sport in which athletes ride feet-first on sleds down an ice-covered track. Competitors spring from the starting position and accelerate their sled by paddling with spiked gloves against the ice surface. Once the Luger leaves the starting section, their downhill motion is solely propelled by the effects of gravity. Athletes compete, one after the other, for the fastest time. Runs can differ by as little as a thousandth of a second, meaning that every minor sled adjustment, change of line choice, and shift of body position is critical. In the past, the sport of Luge has …

Development Of A Rotordynamic Signal Processing Matlab Interface And A Two-Disk Rotor Model, David L. Baker

Master's Theses

Using MATLAB and a National Instruments data acquisition card, a signal processing program meant to monitor the behavior of rotordynamic systems in real-time was developed and tested. By using traditional analysis methods in this field of engineering, commonly desired data representations such as bode, polar, orbit, full spectrum plots were able to be produced to a very high accuracy. Additional capabilities offered by this application are slow roll compensation, synchronous and sub-synchronous filtering, and true three dimensional plotting. The verification of this program was done by comparing the results to the ones acquired with Bently Nevada’s “Automated Diagnostics for Rotating …

Eeg Characterization During Motor Tasks That Are Difficult For Movement Disorder Patients, Adam Joshua Aslam

Master's Theses

Movement disorders are a group of syndromes that often arise due to neurological abnormalities. Approximately 40 million Americans are affected by some form of movement disorder, significantly impacting patients’ quality of life and their ability to live independently. Deep brain stimulation (DBS) is one treatment that has shown promising results in the past couple decades, however, the currently used open-loop system has several drawbacks. By implementing a closed-loop or adaptive DBS (aDBS) system, the need for expensive parameter reprogramming sessions would be reduced, side-effects may be relieved, and habituation could be avoided. Several biomarkers, for example signals or activity derived …

Manufacturing And Instrumentation Of An Open End Compressed Air Shock Tube, Josue O. Ruiz

Master's Theses

Shock tubes have been used extensively to study shock wave structures and high speed flow features. The purpose of constructing this open end shock tube was to have the ability to produce shock waves in a laboratory setting but also understand the exit flow coming out which can be applied to future studies that are beyond the scope of this work. This undertaking would require that an open end shock tube be built and instrumented with PCB Integrated Circuit Piezoelectric (ICP) Pressure Sensor Model 113B24 that would then be connected to a PCB Model 482C05 Signal Conditioner with the purpose …

A Comparison Study Of Composite Laminated Plates With Holes Under Tension, Joun S. Kim

Master's Theses

A Comparison Study of Composite Laminated Plates with Holes under Tension

A study was conducted to quantify the accuracy of numerical approximations to deem sufficiency in validating structural composite design, thus minimizing, or even eliminating the need for experimental test. Error values for stress and strain were compared between Finite Element Analysis (FEA) and analytical (Classical Laminated Plate Theory), and FEA and experimental tensile test for two composite plate designs under tension: a cross-ply composite plate design of [(0/90)4]s, and a quasi-isotropic layup design of [02/+45/-45/902]s, each with a single, centered hole of 1/8” diameter, and 1/4" diameter (four sets …

Moblie Applications To Aid Office To Field Communcation, Will H. Bryson

Construction Management

The advancements in new age communication technology are changing and shaping the construction industry more than ever, and this technology can be utilized to solve the many issues faced in the realm of office to field communication. Currently, many companies in the construction industry struggle to effectively manage office to field communication. In an industry where details surrounding RFI’s, change orders, and submittals are constantly changing, it is imperative that information is communicated effectively and in a timely manner to the necessary people. If communication is not flowing in an accurate and succinct manner, very costly mistakes can be made …

Value Of Utilizing Tubular Daylighting Devices In Csu, Channel Islands' Gateway Hall, Blake T. Walsh

Construction Management

Daylighting is becoming an increasingly more important aspect of building design as our planet’s natural resources deplete and the cost savings for daylighting systems grow. California State University, Channel Islands (CSUCI) values the use of daylighting and aims to incorporate it into its upcoming project, Gateway Hall. One option of daylighting that the campus is considering for this project is tubular daylighting devices (TDD). This paper will study the use of tubular daylighting devices and the potential cost savings that they could have on Gateway Hall. The company leading the way in TDD technology is Solatube, whose products are among …

Metallica Worldwired Tour: Case Study, Phillip Matthews

Construction Management

The concert touring industry is financially performing at its highest level in history. A shifting trend from selling records to selling live entertainment experiences has caused a boom in the event production field. This project examines one of the most successful global tours of 2017, Metallica’s WorldWired Tour. This tour was able to achieve success with an unconventional stage design. The goal was to enhance the audience experience and interaction with the band. To achieve this, Metallica toured with a roofless stage. This unique stage design proposed challenges for all areas of concert production, including lighting, audio, video, and atmosphere. …

Construction Of A House In Tijuana, Mexico, Adam Scianna

Construction Management

No abstract provided.

A Case Study On The Compliance Of The Heavy Duty Diesel Vehicle Regulation, Kyle Potts

Construction Management

In December of 2008 the California Air Resource Board approved the On Road Heavy Duty Diesel Vehicle Regulation. The purpose of this new law is to reduce the emissions from existing on-road diesel vehicles operating throughout California. However, this new regulation is drastically affecting trucking companies throughout the state of California. Trucking companies across state lines are left with a few costly options to comply with the On Road Heavy Duty Diesel Vehicle Regulation. This case study focuses on two similar trucking companies and how they went about complying with the new regulation and which options have been most effective …

Case Study: Diesel Excavators Compared To Hybrid Excavators, Corey Mcgrillen

Construction Management

The construction industry is constantly evolving and developing equipment that is more efficient, materials that promote sustainability and practices that emphasize lean construction principles to enhance productivity on projects. Modern day construction projects have become highly reliant on these ideals due to the highly competitive nature of the industry. In regards to heavy civil construction, specifically the underground utilities market, equipment costs count for a large percentage of overall project costs. Reducing these costs allows a contractor to be more competitive. As the focus on infrastructure construction continues to grow and expand, many heavy civil contractors are turning to alternative …

Bridging The Gap Between Technology Usage In The Construction Industry And In The Classroom, Marco Maffioli

Construction Management

As construction begins to advance more and more every day, technology is one of the most volatile aspects due to its ever changing nature. Technology, and all the software’s that encompass it, is the future of this industry and if we want to keep improving and growing as an industry we need to better align our future new hires with the most prevalent technology and that starts in the classroom. Specifically, the Construction Management Department at Cal Poly, San Luis Obispo, one of the most advanced in Nation, still struggles to align with the expectations and reality of the CM …