Engineering Commons^™

Reducing Food Scarcity: The Benefits Of Urban Farming, S.A. Claudell, Emilio Mejia

Journal of Nonprofit Innovation

Urban farming can enhance the lives of communities and help reduce food scarcity. This paper presents a conceptual prototype of an efficient urban farming community that can be scaled for a single apartment building or an entire community across all global geoeconomics regions, including densely populated cities and rural, developing towns and communities. When deployed in coordination with smart crop choices, local farm support, and efficient transportation then the result isn’t just sustainability, but also increasing fresh produce accessibility, optimizing nutritional value, eliminating the use of ‘forever chemicals’, reducing transportation costs, and fostering global environmental benefits.

Imagine Doris, who is …

Machine Learning-Based Data And Model Driven Bayesian Uncertanity Quantification Of Inverse Problems For Suspended Non-Structural System, Zhiyuan Qin

All Dissertations

Inverse problems involve extracting the internal structure of a physical system from noisy measurement data. In many fields, the Bayesian inference is used to address the ill-conditioned nature of the inverse problem by incorporating prior information through an initial distribution. In the nonparametric Bayesian framework, surrogate models such as Gaussian Processes or Deep Neural Networks are used as flexible and effective probabilistic modeling tools to overcome the high-dimensional curse and reduce computational costs. In practical systems and computer models, uncertainties can be addressed through parameter calibration, sensitivity analysis, and uncertainty quantification, leading to improved reliability and robustness of decision and …

Development Of A Reverse Engineered, Parameterized, And Structurally Validated Computational Model To Identify Design Parameters That Influence American Football Faceguard Performance, William Ferriell

All Dissertations

Traumatic brain injury (TBI) continues to have the greatest incidence among athletes participating in American football. The headgear design research community has focused on developing accurate computational and experimental analysis techniques to better assess the ability of headgear technology to attenuate impacts and protect athletes from TBI. Despite efforts to innovate the headgear system, minimal progress has been made to innovate the faceguard. Although the faceguard is not the primary component of the headgear system that contributes to impact attenuation, faceguard performance metrics, such as weight, structural stiffness, and visual field occlusions, have been linked to athlete safety. To improve …

Simulating Autonomous Cruise Missile Swarm Behaviors In An Anti-Access Area Denial (A2ad) Environment, Kyle W. Goggins

Theses and Dissertations

The increasingly sophisticated anti-access area denial (A2AD) threat imposed by the modern integrated air defense system (IADS), coupled with the decreasingly potent advantage provided by high-end stealth platforms, has prompted Air Force senior leaders to invest in radically changing the nature of air power for the year 2030 and beyond. A prominent element of this new vision is weapon swarming, which aims to address this challenge by overwhelming the IADS with huge numbers of low-cost, attritable aerial assets emboldened by autonomous capabilities. This research proposes a framework for classifying the different levels of autonomous capability along three independent dimensions—namely ability …

Physical Investigation Of Downburst Winds And Applicability To Full Scale Events, Federico Canepa

Electronic Thesis and Dissertation Repository

Thunderstorm winds, i.e. downbursts, are cold descending currents originating from cumulonimbus clouds which, upon the impingement on the ground, spread radially with high intensities. The downdraft phase of the storm and the subsequent radial outflow that is formed can cause major issues for aviation and immense damages to ground-mounted structures. Thunderstorm winds present characteristics completely different from the stationary Gaussian synoptic winds, which largely affect the mid-latitude areas of the globe in the form of extra-tropical cyclones. Downbursts are very localized winds in both space and time. It follows that their statistical investigation, by means of classical full scale anemometric …

Reducing Print Time While Minimizing Loss In Mechanical Properties In Consumer Fdm Parts, Long Le, Mitchel A. Rabsatt, Hamid Eisazadeh, Mona Torabizadeh

Mechanical & Aerospace Engineering Faculty Publications

Fused deposition modeling (FDM), one of various additive manufacturing (AM) technologies, offers a useful and accessible tool for prototyping and manufacturing small volume functional parts. Polylactic acid (PLA) is among the commonly used materials for this process. This study explores the mechanical properties and print time of additively manufactured PLA with consideration to various process parameters. The objective of this study is to optimize the process parameters for the fastest print time possible while minimizing the loss in ultimate strength. Design of experiments (DOE) was employed using a split-plot design with five factors. Analysis of variance (ANOVA) was employed to …

Wavelet Methods For Very-Short Term Forecasting Of Functional Time Series, Jared K. Nystrom

Theses and Dissertations

Space launch operations at Kennedy Space Center and Cape Canaveral Space Force Station (KSC/CCSFS) are complicated by unique requirements for near-real time determination of risk from lightning. Lightning forecast weather sensor networks produce data that are noisy, high volume, and high frequency time series for which traditional forecasting methods are often ill-suited. Current approaches result in significant residual uncertainties and consequentially may result in forecasting operational policies that are excessively conservative or inefficient. This work proposes a new methodology of wavelet-enabled semiparametric modeling to develop accurate and timely forecasts robust against chaotic functional data. Wavelets methods are first used to …

Ensemble Data Fitting For Bathymetric Models Informed By Nominal Data, Samantha Zambo

Dissertations

Due to the difficulty and expense of collecting bathymetric data, modeling is the primary tool to produce detailed maps of the ocean floor. Current modeling practices typically utilize only one interpolator; the industry standard is splines-in-tension.

In this dissertation we introduce a new nominal-informed ensemble interpolator designed to improve modeling accuracy in regions of sparse data. The method is guided by a priori domain knowledge provided by artificially intelligent classifiers. We recast such geomorphological classifications, such as ‘seamount’ or ‘ridge’, as nominal data which we utilize as foundational shapes in an expanded ordinary least squares regression-based algorithm. To our knowledge …

Investigation And Statistical Modeling Of The Mechanical Properties Of Additively Manufactured Lattices, Derek G. Spear, Anthony N. Palazotto

Faculty Publications

This paper describes the background, test methodology, and experimental results associated with the testing and analysis of quasi-static compression testing of additively manufactured open-cell lattice structures. The study aims to examine the effect of lattice topology, cell size, cell density, and surface thickness on the mechanical properties of lattice structures. Three lattice designs were chosen, the Diamond, I-WP, and Primitive Triply Periodic Minimal Surfaces (TPMSs). Uniaxial compression tests were conducted for every combination of the three lattice designs, three cell sizes, three cell densities, and three surface thicknesses. In order to perform an efficient experiment and gain the most information …

Rattle Detection – An Automotive Case Study, Orla Hartley

International Conference on Lean Six Sigma

This case study showcases the use of statistical tools to develop an objective Squeak and Rattle (S&R) measurement and detection test for End Of Line (EOL) sign off in an automotive manufacturing environment. Audio Induced S&R is an unwanted vibration within the vehicle caused by the sound system, impacting on customer perception of vehicle quality. Testing for S&R in an automotive environment has a key challenge; how to robustly detect a rattle at the EOL and thus prevent plant escapes to the customer. The objective test developed used microphones and analysers in order to replace an e subjective listening test. …

Statistically Defensible Wind Tunnel Models, Timothy A. Roche

Theses and Dissertations

Wind tunnels are used to test scale-model air frames in order to collect aerodynamic data. The Subsonic Aerodynamic Research Laboratory (SARL) Wind Tunnel is a low speed wind tunnel located at Wright-Patterson Air Force Base. The SARL Wind Tunnel team approached AFIT for assistance in creating statistically defensible models for the conditions inside the wind tunnel. During a wind tunnel test, pressure sensors cannot be placed at the test model. Instead, pressure is measured by a pitot probe permanently mounted in the corner of the test chamber. The pressure at the model location is predicted from the measurements taken by …

The Wargaming Commodity Course Of Action Automated Analysis Method, William T. Deberry

Theses and Dissertations

This research presents the Wargaming Commodity Course of Action Automated Analysis Method (WCCAAM), a novel approach to assist wargame commanders in developing and analyzing courses of action (COAs) through semi-automation of the Military Decision Making Process (MDMP). MDMP is a seven-step iterative method that commanders and mission partners follow to build an operational course of action to achieve strategic objectives. MDMP requires time, resources, and coordination – all competing items the commander weighs to make the optimal decision. WCCAAM receives the MDMP's Mission Analysis phase as input, converts the wargame into a directed graph, processes a multi-commodity flow algorithm on …

A Transdisciplinary Analysis Of Just Transition Pathways To 100% Renewable Electricity, Adewale Aremu Adesanya

Dissertations, Master's Theses and Master's Reports

The transition to using clean, affordable, and reliable electrical energy is critical for enhancing human opportunities and capabilities. In the United States, many states and localities are engaging in this transition despite the lack of ambitious federal policy support. This research builds on the theoretical framework of the multilevel perspective (MLP) of sociotechnical transitions as well as the concept of energy justice to investigate potential pathways to 100 percent renewable energy (RE) for electricity provision in the U.S. This research seeks to answer the question: what are the technical, policy, and perceptual pathways, barriers, and opportunities for just transition to …

Resource-Saving Technologies For The Production Of Elastic Leather Materials: Collective Monograph, Olena Korotych, Anatolii Danylkovych, Serhii Bilinskyi, Serhii Bondarenko, Slava Branovitska, Vasyl Chervinskyi, Nataliia Khliebnikova, Alona Kudzieva, Viktor Lishchuk, Nataliia Lysenko, Olena Mokrousova, Nataliia Omelchenko, Vera Palamar, Yuliia Potakh, Oksana Romanyuk, Olga Sanginova, Oleksandr Zhyhotsky

Chemistry Publications and Other Works

This monograph contains a collection of recent research papers focusing on advancing existing technologies and developing new technologies to improve the environmentally friendliness and save resources during the production of elastic leather materials. The papers are organized based on the type of technological process used to preserve raw hides. A lot of attention is devoted to mathematical planning, simulations, and multicriteria optimization of the technological processes using newly developed chemical reagents. The monograph contains a complex study of physicochemical properties and characteristics of the resulting leather materials. The developed technologies were tested by the private joint-stock company Chinbar (Kyiv, Ukraine) …

Public Perception Of Different Planting Techniques Using Augmented Reality, Sultana Quader Tania

Electronic Theses and Dissertations

The objective of this study was to measure public perception of the different planting techniques (block and matrix), which are used at visitor information centers (VICs) and other rights of way (ROW) areas. The main factors that affect public perception of planting techniques were identified through an extensive literature review and qualitative survey from four welcome centers in the state of Georgia. The ranking of those indicators, based on public preferences, was discovered through a quantitative survey. During the first phase of the quantitative survey, images of block and matrix were used. An iOS-based user-friendly and cost-effective augmented reality (AR) …

Maquiladoras In Central America: An Analysis Of Workforce Schedule, Productivity And Fatigue., Jose L. Barahona

Masters Theses & Specialist Projects

Textile factories or Maquiladoras are very abundant and predominant in Central American economies. However, they all do not have the same standardized work schedule or routines. Most of the Maquiladoras only follow schedules and regulations established by the current labor laws without taking into consideration many variables within their organization that could affect their overall performance. As a result, the purpose of the study is to analyze the current working structure of a textile Maquiladora and determine the most suitable schedule that will abide with the current working structure but also increase production levels, employee morale and decrease employee fatigue. …

Model-Based Predictive Analytics For Additive And Smart Manufacturing, Zhuo Yang

Doctoral Dissertations

Qualification and certification for additive and smart manufacturing systems can be uncertain and very costly. Using available historical data can mitigate some costs of producing and testing sample parts. However, use of such data lacks the flexibility to represent specific new problems which decreases predictive accuracy and efficiency. To address these compelling needs, in this dissertation modeling techniques are introduced that can proactively estimate results expected from additive and smart manufacturing processes swiftly and with practical levels of accuracy and reliability. More specifically, this research addresses the current challenges and limitations posed by use of available data and the high …

Tuning Optimization Software Parameters For Mixed Integer Programming Problems, Toni P. Sorrell

Theses and Dissertations

The tuning of optimization software is of key interest to researchers solving mixed integer programming (MIP) problems. The efficiency of the optimization software can be greatly impacted by the solver’s parameter settings and the structure of the MIP. A designed experiment approach is used to fit a statistical model that would suggest settings of the parameters that provided the largest reduction in the primal integral metric. Tuning exemplars of six and 59 factors (parameters) of optimization software, experimentation takes place on three classes of MIPs: survivable fixed telecommunication network design, a formulation of the support vector machine with the ramp …

Applying Ahp And Clustering Approaches For Public Transportation Decisionmaking: A Case Study Of Isfahan City, Alireza Salavati, Hossein Haghshenas, Bahador Ghadirifaraz, Jamshid Laghaei, Ghodrat Eftekhari

Journal of Public Transportation

The main purpose of this paper is to define appropriate criteria for the systematic approach to evaluate and prioritize multiple candidate corridors for public transport investment simultaneously to serve travel demand, regarding supply of current public transportation system and road network conditions of Isfahan, Iran. To optimize resource allocation, policymakers need to identify proper corridors to implement a public transportation system. In fact, the main question is to adopt the best public transportation system for each main corridor of Isfahan. In this regard, 137 questionnaires were completed by experts, directors, and policymakers of Isfahan to identify goals and objectives in …

A Traders Guide To The Predictive Universe- A Model For Predicting Oil Price Targets And Trading On Them, Jimmie Harold Lenz

Doctor of Business Administration Dissertations

At heart every trader loves volatility; this is where return on investment comes from, this is what drives the proverbial “positive alpha.” As a trader, understanding the probabilities related to the volatility of prices is key, however if you could also predict future prices with reliability the world would be your oyster. To this end, I have achieved three goals with this dissertation, to develop a model to predict future short term prices (direction and magnitude), to effectively test this by generating consistent profits utilizing a trading model developed for this purpose, and to write a paper that anyone with …

Combined Computational-Experimental Design Of High-Temperature, High-Intensity Permanent Magnetic Alloys With Minimal Addition Of Rare-Earth Elements, Rajesh Jha

FIU Electronic Theses and Dissertations

AlNiCo magnets are known for high-temperature stability and superior corrosion resistance and have been widely used for various applications. Reported magnetic energy density ((BH) _max) for these magnets is around 10 MGOe. Theoretical calculations show that ((BH) _max) of 20 MGOe is achievable which will be helpful in covering the gap between AlNiCo and Rare-Earth Elements (REE) based magnets. An extended family of AlNiCo alloys was studied in this dissertation that consists of eight elements, and hence it is important to determine composition-property relationship between each of the alloying elements and their influence on the bulk properties.

In …

Factors Affecting Dimensional Precision Of Consumer 3d Printing, David D. Hernandez

International Journal of Aviation, Aeronautics, and Aerospace

This paper investigates the factors affecting dimensional precision of consumer-grade 3D printing, attempting to isolate and mitigate sources of error. The focus is on creating engineering prototypes of, tooling for, or finalized instances of mechanical devices. A specific fused deposition modeling printer – the Ultimaker 2 – is analyzed in terms of meeting precise physical dimensions, consistent shapes, and predictable surface finish. Extensive trial and error resulted in removal of several sources of bias, with square test articles exhibiting a lower-than-anticipated mean percentage error of -0.387% (SD = 0.559), a value comparable to other modern manufacturing techniques. A full …

Nanoscaled Cellulose And Its Carbonaceous Material: Application And Local Structure Investigation, Yujie Meng

Doctoral Dissertations

In this dissertation, cellulose nanocrystals three-dimensional morphology, size distribution, and the crystal structure were statistically and quantitatively investigated. Lognormal distribution was identified as the most likely for cellulose nanocrystals’ size distribution. Height and width dimensions were shown to decrease toward the ends from the midpoint of individual CNCs, implying a spindle-like shape. XRD analysis of crystallite size accompanied with TEM and AFM measurements revealed that the cross-sectional dimensions of individual switchgrass CNC were either rectangular or elliptical shape, with an approximately 3~5 nm [nanometer] lateral element length range. A sponge-like carbon aerogel from microfibril cellulose with high porosity, ultra-low density, …

Blunt Impact Performance Evaluation Of Helmet Lining Systems For Military And Recreational Use, Jaclyn Siniora, Ryan Taylor, Darren Suey

Industrial Technology and Packaging

With the increasing problem in collegiate athletes experiencing injuries to the brain, different helmet liners where put to the test to see which liner provided athletes the greatest protection under specific conditions.

This senior project evaluates five different liners in football helmets. Each of the helmet liners were tested at three different temperatures: hot, cold, and ambient. Each helmet had seven different impact locations which were put to the test. The project was designed to be used to test ACH military combat liners as well. Due to shipping bottle necks the ACH combat liners have been left to future Cal …

An Investigation Of Process Parameters To Optimize The Fiber Diameter Of Electrospun Vascular Scaffolds Through Experimental Design, Steffi Wong

Biomedical Engineering

No abstract provided.

Route Choice Behavior In Risky Networks With Real-Time Information, Michael D. Razo

Masters Theses 1911 - February 2014

This research investigates route choice behavior in networks with risky travel times and real-time information. A stated preference survey is conducted in which subjects use a PC-based interactive maps to choose routes link-by-link in various scenarios. The scenarios include two types of maps: the first presenting a choice between one stochastic route and one deterministic route, and the second with real-time information and an available detour. The first type measures the basic risk attitude of the subject. The second type allows for strategic planning, and measures the effect of this opportunity on subjects' choice behavior.

Results from each subject are …

Detecting Near-Earth Objects Using Cross-Correlation With A Point Spread Function, Anthony P. O'Dell

Theses and Dissertations

This thesis describes a process to help discover Near-Earth Objects (NEOs) of larger than 140 meters in diameter from ground based telescopes. The process involves using Nyquist sampling rate to take data from a ground-based telescope and measuring the atmospheric seeing parameter, r₀, at the time of data collection. r0 is then used to create a point spread function (PSF) for a NEO at the visual magnitude limit of the telescope and exposure time. This PSF is cross-correlated with the Nyquist sampling rate image from the telescope to reduce the noise and therefore increase the detection probability of …

Improving Mixed Variable Optimization Of Computational And Model Parameters Using Multiple Surrogate Functions, David Bethea

Theses and Dissertations

This research focuses on reducing computational time in parameter optimization by using multiple surrogates and subprocess CPU times without compromising the quality of the results. This is motivated by applications that have objective functions with expensive computational times at high fidelity solutions. Applying, matching, and tuning optimization techniques at an algorithm level can reduce the time spent on unprofitable computations for parameter optimization. The objective is to recover known parameters of a flow property reference image by comparing to a template image that comes from a computational fluid dynamics simulation, followed by a numerical image registration and comparison process. Mixed …

Improved Hyperspectral Image Testing Using Synthetic Imagery And Factorial Designed Experiments, Joseph P. Bellucci

Theses and Dissertations

The goal of any remote sensing system is to gather data about the geography it is imaging. In order to gain knowledge of the earth's landscape, post-processing algorithms are developed to extract information from the collected data. The algorithms can be intended to classify the various ground covers in a scene, identify specific targets of interest, or detect anomalies in an image. After the design of an algorithm comes the difficult task of testing and evaluating its performance. Traditionally, algorithms are tested using sets of extensively ground truthed test images. However, the lack of well characterized test data sets and …

Quantifying Initial Condition And Parametric Uncertainties In A Nonlinear Aeroelastic System With An Efficient Stochastic Algorithm, Daniel R. Millman

Theses and Dissertations

There is a growing interest in understanding how uncertainties in flight conditions and structural parameters affect the character of a limit cycle oscillation (LCO) response, leading to failure of an aeroelastic system. Uncertainty quantification of a stochastic system (parametric uncertainty) with stochastic inputs (initial condition uncertainty) has traditionally been analyzed with Monte Carlo simulations (MCS). Probability density functions (PDF) of the LCO response are obtained from the MCS to estimate the probability of failure. A candidate approach to efficiently estimate the PDF of an LCO response is the stochastic projection method. The objective of this research is to extend the …