Engineering Commons^™

Nondestructive Evaluation Of Structural Defects In Concrete Slabs, Ehsanul Kabir

Electronic Theses and Dissertations

Nondestructive testing (NDT) is a reliable method for determining the structural integrity of new and old construction and understanding the condition of structural defects. It is widely acknowledged that the interpretation of nondestructive evaluation (NDE) has a significant impact on the reliability and consistency of this technology. However, NDT data acquisition remains subjective and heavily dependent on the operator’s knowledge and expertise. As a result, there are still issues to be resolved regarding the imaging and diagnostic procedures for NDT-based concrete inspection. NDT methods such as ground penetrating radar (GPR), and impact-echo (IE), have been extensively used to inspect concrete …

Implementation Of Ground Penetrating Radar (Gpr) And Complementary Non-Destructive Testing On Concrete Structures, Macy Spears

Electronic Theses and Dissertations

This study analyzes the application and practicality of different non-destructive testing (NDT) methods for the inspection of reinforced concrete. There are two studies discussed in this paper. The first one is a laboratory investigation, utilizing ground penetrating radar (GPR) on concrete slabs that consisted of simulated defects to mimic those found in real concrete structures. This served as a preliminary experiment to verify the GPR data with the design of the slabs. The following study describes a field investigation on an old bridge deck, which involved multiple testing methods. The techniques used were GPR, impact echo (IE), ultrasonic pulse echo …

Predictions Of The Dynamic Complex Modulus Of Non-Conventional Asphalt Concrete Using Machine Learning Techniques, Annie Benson

Electronic Theses and Dissertations

The complex dynamic modulus (|E*|) is a characterization property that defines the stiffness of an asphalt mixture. The dynamic modulus can be found through lab testing or predictions. Since lab testing can be time-consuming and expensive, the prediction method can be used as an alternative method. While a statistical method has been traditionally used for the |E*| prediction such as the Witczak’s predictive equations, machine learning (ML) is recently emerging as an alternative way that |E*| predictions can be made. This research attempted to predict the |E*| using several ML techniques including linear regression, support vector machines (SVM), decision trees, …

Accessing The Relative Sustainability Of Point-Of-Use Water Disinfection Technologies Through Costs And Environmental Impacts, Bright C. Elijah

Electronic Theses and Dissertations

According to the World Health Organization, 785 million people lack access to basic drinking water facilities, and 144 million people rely on surface water which is prone to microbial contamination. Point-of-use (POU) water disinfection technologies can be adopted to help address these issues by treating water at the household level; however, navigating various POU disinfection technologies for a given water source or location can be difficult. While numerous conventional POU technologies exist (e.g., boiling water, POU chlorination), new emerging POU technologies (e.g., using novel materials or advanced processes) have been coined by developers to be lower cost with higher treatment …

Analysis Of Spatial Discrepancies Between 76-Foot Close Range Photogrammetric And Terrestrial-Lidar Models, Abdoul K. Ouangre

Electronic Theses and Dissertations

This study presents an analysis of the accuracy of a 3D model generated by two different methods. In the first method, the 3D model is generated via Laser Scanning. In the second method, the 3D model is generated via Close-range Photogrammetry from a drone flying at 76 feet above the ground. Photogrammetry is a photo-based technique that uses images to generate 3D models of objects where distances could be extracted from. Close-range photogrammetry is the approach of generating a 3D model from a camera placed anywhere between 1 foot and 1000 feet relative to the object. Terrestrial LiDAR is the …

New Longitudinal Error Balancing Approaches For Closed Traverses, Jose L. Manzano

Electronic Theses and Dissertations

This study presents two novel approaches to balance the horizontal longitudinal error of closure, E_C, in closed polygonal traverses. The standard procedure to balance E_C is the Compass Rule. This technique reduces E_C to zero by applying corrections in the lengths of all traverse sides. Those corrections are proportional to the corresponding side lengths. That is, this approach is not an error-correcting approach, but an error-balancing procedure.

The proposed new techniques are based on sensitivity analysis of E_C with respect to small variations, Δ_i, in the lengths of all sides i = 1, …

Impact Of Blended Salt Anti-Icers/Deicers On Properties Of Asphalt Binders, Nurudeen A. Abidoye

Electronic Theses and Dissertations

Anyone who has ever attempted to remove a layer of ice from a roadway or sidewalk by plowing or shoveling knows it is no easy task when the ice is firmly bonded to the asphalt/concrete surface. Winter anti-icing/deicing operations are moral choices that mankind has made to combat winter storms. This research is aimed at evaluating the macro and nano structural impacts of (anti-icing/de-icing) salt on aged and unaged asphalt binders. The macro structural impacts focused on the rheological and creep properties, and the nano structural impacts focused on the surface topography, adhesion force, and modulus of asphalt binders. Rheological …

Current Status Of Design And Construction Of Piles With A Pilot Hole On Rock, Charles C. Crowner

Electronic Theses and Dissertations

Driven piles at project sites get their load bearing capacity from side friction along the driven lengths as well as from end resistance. Pilot holes is a pile driving assistance method used to aid driving displacement piles through hard/ dense layers and rock. These pilot holes can be a size smaller or larger than the pile that is to be installed. The pilot hole is first drilled down to a specific depth. The use of a pilot hole reduces the “end bearing” and “side resistance” within the drilled zone and aids the driving of the pile. This process also complicates …

Prediction Of The Compressive Strength And Dynamic Modulus Of Fiber Reinforced Concrete By Ultrasonic Pulse Velocity Measurement At Early Ages, Daniel A. Castillo Pereira

Electronic Theses and Dissertations

This research investigates the relationship between early age ultrasonic pulse velocity and the compressive strength and dynamic modulus of steel, polypropylene, nylon, and glass fiber reinforced concrete. Previous studies prove that adding fibers to concrete alters the propagation of ultrasonic pulse velocity waves. Therefore, each type of fiber-reinforced concrete will have a unique relationship between ultrasonic pulse velocity and its compressive strength and dynamic modulus depending on fiber type, fiber volume fraction, water to cement ratio, and test age. To test this hypothesis, an experimental program comprising of one hundred eighty-nine 100 mm x 200 mm fiber reinforced concrete cylinders …

Optimizing Anti-Icing Operation For Winter Roadway Treatment Using A Decision-Making Tool, Jyoti B. Das

Electronic Theses and Dissertations

Managing winter roadway treatment can be a challenge where winter is not severe, but snowfall is experienced a few times a year. Winter weather makes the road dangerous and challenging to travel. Most US states have approached and implemented different winter road maintenance practices to make transportation of goods, services, and people uninterrupted. However, the state of Georgia has always struggled to deal with winter weather. Recently, there has been some progress. The Georgia Department of Transportation prepared a winter road treatment plan in 2019, and they are still working on improving it. Increasing emphasis on pre-treating the road rather …

Finite Element Modeling Of Mechanically Stabilized Earth Walls Built With Welded Wire Wall Panels, Dejuan G. Solan

Electronic Theses and Dissertations

In this thesis, a finite element modeling of Mechanically Stabilized Earth (MSE) walls using welded wire wall panels was performed. The implementation of finite element modeling and analysis proved to be quite efficient in simulating the three-dimensional behavior of wall panels that are a part of MSE walls. The comprehensive finite element model included defined concrete and steel material properties in order to present both the realistic behaviors of each component in the model as well as better facilitating and increasing the accuracy of the simulation of numerous finite element analysis (FEA) cases. FEA was employed to simulate welded wire …

Accuracy Of 3d Point-Cloud And Photo-Based Models Of City Street Intersections, Mariah D. Peart

Electronic Theses and Dissertations

From Georgia Southern University’s Built Environment and Modeling lab, this study compares point positions and distance measurements completed with state-of-the-art instruments and equipment. A modern, 12-second, laser scanner, a modern unmanned aerial vehicle and a highly accurate, 1-second robotic total station were employed for this study. The latter serving as the benchmark instrument. The main objective of this quantitative comparison is to explore the accuracy and usability of a relatively large point-cloud model, as a virtual surveying tool for redesign/reconstruction purposes. This project involves the generation of large, 3D, point-cloud models of two busy and complex city street intersections. One …

Building Information Modeling (Bim) Impact On Construction Performance, David D. John

Electronic Theses and Dissertations

This study is designed to address the need for having a measure for Construction Performance on BIM-assisted construction projects. Through this study a new Construction Key Performance Indicator (CKPI) matrix is identified and created by the author. The CKPI could be used to assess BIM-assisted projects. Utilizing a sequential mixed methodology approach, academic and practitioner perspectives are assessed. A qualitative content analysis and quantitative descriptive analysis based on demographics are conducted to establish a better understanding of BIM and Construction Performance. The academic perspective is used to assess the relevance of BIMM and CKPI indicators, and the practitioner perspective is …

Designing And Testing 3-D Printed Wafer-Box With Embedded Pzt Sensors To Identify The Shape Effect On Energy Harvesting, Ahmad Jami Safayet

Electronic Theses and Dissertations

Piezoelectric energy has been recently paid attention in the field of alternative energy. Day by day the traditional energy sources including Coal tar and oils are becoming scarce. People are heading to an alternative energy source to meet the future energy demand. Piezoelectric energy is one of the competitive energy sources compared to the conventional renewable energy sources including solar, wind, and geothermal power and so on. This energy production method bears enormous research potential because it can be used as the roadway for a new method of power generation. This research project aimed to identify which shaped wafer-box produced …

A Case Study Of Student Veteran Efficacy In The College Of Engineering And Information Technology At Georgia Southern University, Kevin G. Finley

Electronic Theses and Dissertations

This thesis addresses the issues student veterans face in their transition from military to academic life while pursuing an undergraduate degree in the STEM fields (Science, Technology, Engineering, Math) at Georgia Southern University’s College of Engineering and Information Technology (CEIT). Historically this transition has been a difficult one. Through the implementation of a mentorship program comprised of military veterans on the staff and faculty of Georgia Southern University as well as assistance and participation from members of the case study researcher team and primary researcher this program assisted incoming military student veterans as they assimilated into the collegiate atmosphere. The …

Audio-Based Productivity Forecasting Of Construction Cyclic Activities, Chris A. Sabillon

Electronic Theses and Dissertations

Due to its high cost, project managers must be able to monitor the performance of construction heavy equipment promptly. This cannot be achieved through traditional management techniques, which are based on direct observation or on estimations from historical data. Some manufacturers have started to integrate their proprietary technologies, but construction contractors are unlikely to have a fleet of entirely new and single manufacturer equipment for this to represent a solution. Third party automated approaches include the use of active sensors such as accelerometers and gyroscopes, passive technologies such as computer vision and image processing, and audio signal processing. Hitherto, most …

Discrepancy Analysis Between Close-Range Photogrammetry And Terrestrial Lidar, Sam R. Newsome Jr

Electronic Theses and Dissertations

This study presents a comparison of building measurements performed on 3D models generated by two different approaches. In one approach, the models were produced via close-range photogrammetry. Such models are based on still-frame photographs that are, post-processed with commercially available photogrammetric software. In the second approach, 3D point-cloud models were generated via laser scanning. For this purpose, three case studies were conducted. The first was a simple one story structure, the second was a multi-story Maya ruin, and the third was an earth filled terrace. Several benchmarks within a closed traverse were established to serve as standard georeference points for …

Color Removal From Pulp Mill Effluent Using Coal Ash Produced From Georgia Power Coal Combustion Plants, Christopher B. Willett

Electronic Theses and Dissertations

Two environmental concerns currently face Georgia: coal fly ash (CFA) waste from coal power plants, and the effluent generated by pulp mills. Pulp mill effluent discolors surface waters into which it is discharged, and has been proven to negatively impact the dissolved oxygen and carbon necessary for aquatic life. The proposed solution is a cost-effective adsorption treatment using an inexpensive but abundantly available waste material: CFA. CFA possesses beneficial properties that allow it to effectively remove contaminants, and is available at significantly reduced cost. The primary research objective was to define treatment parameters that would result in the maximum removal …

Performance Characteristics Of Polyethylene Terephthalate (Pet) Modified Asphalt, Matthew D. Earnest

Electronic Theses and Dissertations

Polyethylene terephthalate (PET) plastic is utilized primarily in food and beverage packaging. Although a portion of waste PET is recycled, the majority of the waste is buried in landfills. Therefore, the use of ground PET particles in asphalt may provide an environmentally friendly solution for the disposal of large quantities of PET waste. This study evaluated the performance of PET as an asphalt modifier with both asphalt binder and asphalt mixture testing. The binder testing was conducted on wet process blends produced with a high shear mixer at PET contents of 5, 10, and 15 percent by weight of the …

Water And Nutrient Reuse Within Closed Hydroponic Systems, Emerson Christie

Electronic Theses and Dissertations

Currently, little research exists on the maintenance of individual nutrient balance within the nutrient solutions of closed hydroponic systems and how this maintenance may result in reductions in water and nutrient consumption. In this study, a nutrient solution management procedure was developed to maintain outputs while minimizing inputs. Lactuca sativa (lettuce) crops were grown in six closed hydroponic systems utilizing the nutrient film technique. Electrical conductivity was used as the primary indicator of nutrient solution quality and determined if the nutrient solution was discarded and replaced (control systems) or restored (test systems). Restorations in test systems were made individually to …

Geotextile Tubes And Their Application To Dewatering, Kevin R. Morgan

Electronic Theses and Dissertations

Geotextile tubes are a proven cost-effective technology offering speed, efficiency, and minimal impact to the environment for dewatering of sediment or sludge from dredging operations. Common applications include: removal of solids from municipal water and waste water treatment, agricultural remediation, marine dredging operations, construction dewatering, and beach preservation and protection. Geotextile tubes are manufactured in a variety of configurations.

Geotextile tubes are used for a wide variety of environmental applications including dewatering and slurry containment. One of the most important design aspects of the tubes themselves is the ability to be flexible and expand and hold form under high pressure …

Evaluation Of Long Term Effects Of Erosion Due To Groin Placement In The Northern Yucatan Peninsula, Andrew V. Mahfood

Electronic Theses and Dissertations

This thesis documents the results of a study conducted to evaluate the long term effects of groin placement on beach re-nourishment and beach restoration in the Yucatan peninsula. The study includes the evaluation of six control points located on Chelem beach in Yucatan, Mexico, very close to the Progreso pier. The control points were set up in an active groin field to record data on the re-nourishment project covering the Chelem beach area. These erosion control groins were constructed as part of an experimental project to see how the adopted U.S. Army Corps of Engineers guidelines, for installing groins, affected …