Engineering Commons^™

Integrating Freight Into Livable Communities, Kristine M. Williams, Alexandria Carroll

TREC Final Reports

Where livability is a goal of the planning process, freight runs the risk of not being considered except as an afterthought or as something to be excluded. Yet, freight is an integral part of local economic development. Because economic prosperity is a key characteristic of livable communities, freight must be incorporated into the planning process. This study explores the relationship between freight and livability through a comprehensive literature review and case study research. The final report includes a menu of strategies and case study perspectives that highlight the importance of transportation and land use integration, interagency coordination, and context-sensitivity in …

National Study Of Brt Development Outcomes, Arthur C. Nelson, Joanna Ganning

TREC Final Reports

Bus rapid transit (BRT) is poised to become the “next big thing” in public transit. From virtually no systems a generation ago, there are now 19 lines operating with at least seven under construction and more than 20 in the planning stages. BRT is gaining popularity because of its combination of low capital cost and potential for high levels of benefits. But are BRT systems effective in attracting development?

To answer this and many more trending BRT questions, the Metropolitan Research Center (MRC) reviewed multiple studies using data from the United States Census Bureau, Longitudinal Employer-Household Dynamics, and CoStar data …

How To Estimate Pedestrian Demand, Kelly Clifton, Patrick Allen Singleton, Christopher D. Muhs, Robert J. Schneider

TREC Project Briefs

There is growing support to improve the quality of the walking environment and make investments to promote pedestrian travel. Such efforts often require analytical non-motorized planning tools to estimate levels of pedestrian demand that are sensitive to environmental and demographic factors at an appropriate scale. Despite this interest and need, current forecasting tools, particularly regional travel demand models, often fall short.

To address this gap, Oregon Metro and NITC researcher Kelly Clifton worked together to develop a pedestrian demand estimation tool. For generations, planners have been using statistical models to forecast travel demand, but these models have traditionally been auto-centered. …

An Exploration Of Bicyclist Comfort Levels Utilizing Crowdsourced Data, Bryan Philip Blanc

Dissertations and Theses

Bicycle transportation has become a central priority of urban areas invested in improving sustainability, livability, and public health outcomes. Transportation agencies are striving to increase the comfort of their bicycle networks to improve the experience of existing cyclists and to attract new cyclists. The Oregon Department of Transportation sponsored the development of ORcycle, a smartphone application designed to collect cyclist travel, comfort, and safety information throughout Oregon. The sample resulting from the initial deployment of the application between November 2014 and March 2015 is described and analyzed within this thesis. 616 bicycle trips from 148 unique users were geo-matched to …

Development Of A Pedestrian Demand Estimation Tool, Kelly Clifton, Patrick Allen Singleton, Christopher D. Muhs, Robert J. Schneider

Civil and Environmental Engineering Faculty Publications and Presentations

Most research on walking behavior has focused on mode choice or walk-trip frequency. In contrast, this study is one of the first to analyze the destination choice behaviors of pedestrians. Using about 4,500 walk trips from a 2011 household travel survey in the Portland, OR, region, we estimated multinomial logit pedestrian destination choice models for six trip purposes. Independent variables included terms for impedance (walk-trip distance); size (employment by type, households); supportive pedestrian environments (parks, a pedestrian index of the environment variable called PIE); barriers to walking (terrain, industrial-type employment); and traveler characteristics. Unique to this study was the use …

Evaluating The Use Of Crowdsourcing As A Data Collection Method For Bicycle Performance Measures And Identification Of Facility Improvement Needs, Miguel A. Figliozzi, Bryan Philip Blanc

Civil and Environmental Engineering Faculty Publications and Presentations

This research developed a smartphone application called ORcycle to collect cyclists’ routes, users, and comfort levels. ORcycle combines GPS revealed route data collection with new questionnaires that try to elicit cyclists’ attitudes as well as comfort levels and factors that influence their perceived comfort and route choice. The new questionnaires were developed to better understand how cyclists’ comfort levels are affected by route characteristics, route stressors, safety reports, cyclists’ demographics, and cyclists’ cycling attitude. Preliminary results show that many trip characteristics, route choice factors, route stressors and demographic variables are correlated with comfort levels. ORcycle is the first statewide deployment …

An Evaluation Of The Neighborhood Traffic Management Program Of Centennial, Colorado, Rolando Gabriel Melgoza

Civil and Environmental Engineering Master's Project Reports

Residential neighborhoods throughout the United States seek to maintain a quality of life where residents can live free of traffic factors adversely affecting their safety. Many communities have adopted a Neighborhood Traffic Management Program (NTMP) to address concerns over cut-through traffic, speeding, and safety. The City of Centennial, Colorado, incorporated in 2001, is a young city and has its own NTMP. Four traffic mitigation projects have been implemented. The objective of this research is to conduct a before and after comparison study of each Centennial NTMP project, to review the NTMP policies of American cities with similar suburban characteristics to …

Evaluating The Effects Of A Congestion And Weather Responsive Advisory Variable Speed Limit System In Portland, Oregon, Matthew Blake Downey

Dissertations and Theses

Safety and congestion are ever present and increasingly severe transportation problems in urban areas throughout the nation and world. These phenomena can have wide-ranging consequences relating to safety, the economy, and the environment. Adverse weather conditions represent another significant challenge to safety and mobility on highways. Oregon is not immune from either of these global issues. Oregon Route (OR) 217, to the southwest of the downtown Portland, is one of the worst freeways for congestion in the state and is also subject to the Pacific Northwest's frequently inclement and unpredictable climate. High crash rates, severe recurrent bottlenecks and highly unreliable …

Webinar: Impacts Of Roadway And Traffic Characteristics On Air Pollution Risks For Bicyclists, Alexander Y. Bigazzi

TREC Webinar Series

Active travel such as walking and bicycling can lead to health benefits through an increase in physical activity. At the same time, more active travelers breath more and so can experience high pollution inhalation rates during travel. This webinar will review the state of knowledge about how roadway and traffic characteristics impact air pollution risks for bicyclists, including the latest PSU research quantifying bicyclists' uptake of traffic-related air pollution using on-road measurements in Portland. The PSU research team including Alex Bigazzi, Jim Pankow, and Miguel Figliozzi quantified bicyclist exposure concentrations on different types of roadways, respiration responses to exertion level, …

Bicyclist Compliance At Signalized Intersections, Samson Ray Riley Thompson

Dissertations and Theses

This project examined cyclist red light running behavior using two data sets. Previous studies of cyclist compliance have investigated the tendencies of cyclists to run red lights on the whole by generalizing different maneuvers to their end outcome, running a red light. This project differentiates between the different types of red light running and focuses on the most egregious case, gap acceptance, which is when a cyclist runs a red light by accepting a gap in opposing traffic.

Using video data, a mathematical model of cyclist red light running was developed for gap acceptance. Similar to other studies, this analysis …

Impacts Of Replacing A Tight Diamond Interchange With A Spui – A Wilsonville Interchange Study, Sina Vadaei

Civil and Environmental Engineering Master's Project Reports

Tight diamond interchanges (TDI) and single point urban interchanges (SPUIs) are generally types of interchanges that can be used interchangeably in areas where right-of-way is constrained. There are limited amount of research conducted regarding the operational analysis and comparison of these two interchanges. The research that has been done regarding this topic are outdated and generally conclude that SPUIs perform better or about the same. Without knowing the true performances of the two interchange designs, it would make it difficult for engineers and planners to choose between the two interchanges.

This research study will use the current updated version of …

Safety At Half-Signal Intersections In Portland, Oregon, Todd Robert Johnson

Dissertations and Theses

The safety at half-signalized intersections in Portland, Oregon is analyzed in this thesis using 10 years of crash history and analysis of video that was collected at a subset of intersections. A half-signalized intersection has a standard red-yellow-green traffic signal for automobiles on the major road, a stop sign for motorists on the minor road, and a pedestrian signal with actuation for pedestrians and/or bicyclists on the minor road. Although prevalent in Canada, this type of intersection control is not typically found in the United States because the MUTCD explicitly prohibits its use. Half-signal use is limited mostly to two …

Webinar: Exploring Pedestrian Responsive Traffic Signal Timing Strategies In Urban Areas, Sirisha Murthy Kothuri

TREC Webinar Series

The role of walking in the development of healthy, livable communities is being increasingly recognized. In urban areas, intersections are often viewed as a deterrent to walking, as their operation primarily favors automobiles, leading to large and unnecessary delays for pedestrians. There is currently very limited research on accommodating and/or prioritizing pedestrians at signalized intersections in the North American context. Pedestrians are often considered as a deterrent to efficient vehicular traffic flow and therefore active efforts to include them in operational decisions at intersections have been lagging. This research aims to fill that gap by understanding factors that influence pedestrian …

A Microsimulation Of Novel Intersection Designs, Aman Kinfemichael Woldetinsae

Civil and Environmental Engineering Master's Project Reports

The focus of this project is to see how a turbo roundabout and a protected intersection designs behave when they are applied on two study sites in Portland, OR. PTV VISSM is used to model, analyze and compare the performances of these designs with the existing intersection. In addition, the best features of the protected intersection and the turbo roundabout were combined to create a new intersection design that is safer for the bicyclists and also performs better than the existing intersection.

The analysis is conducted for five different volume scenarios for both the study sites. The results of the …

Comparing Mode Shares For Non-Residential Destinations In Urban And Suburban Environments, Tasnia Subrin

Civil and Environmental Engineering Master's Project Reports

To ensure facility for multimodal transportation is one of the most important concerns in today's transportation sector, with initiatives being taken to make multimodal transportation popular. The built environment variables have a strong relationship with transportation mode choice, but whether that relationship holds true in urban and suburban neighborhoods in the same manner has not been considered. Using data for three non-residential land uses, this research explores whether the built environment variables in suburban areas influences mode share like it does in urban areas. We used survey data conducted at the establishments regarding respondents' travel characteristics from a previous study, …

Empirical Evaluation Of Transit Signal Priority Through Fusion Of Heterogeneous Transit And Traffic Signal Data And Novel Performance Measures, Wei Feng, Miguel A. Figliozzi, Robert Bertini

Civil and Environmental Engineering Faculty Publications and Presentations

Transit signal priority (TSP) can reduce transit delay at signalized intersections by making phasing adjustments. TSP is a relatively inexpensive and easy to implement tool to make transit service faster and more reliable. TSP also sends a signal that a city or region encourages the growth of transit mode split. With the aim of assessing the performance of an existing TSP system, this study had access to a unique set of high-resolution bus and traffic signal data. Novel algorithms and performance measures to measure TSP performance are proposed. Results indicate that a timely and effective TSP system requires a high …

Roadway Determinants Of Bicyclist Multi-Pollutant Exposure Concentrations, Alexander Y. Bigazzi, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Due to poorly quantified traffic-exposure relationships, transportation professionals are unable to easily estimate exposure differences among bicycle routes for network planning, design, and analysis. This paper estimates the effects of roadway characteristics on bicyclist multi-pollutant exposure concentrations, controlling for meteorology and background conditions. Concentrations of volatile organic compounds (VOC), carbon monoxide (CO), and fine particulate matter (PM2.5) are modeled using high-resolution on-road data. This paper also compares exposure differences on immediately parallel high-traffic/low-traffic facilities and is the first study to quantify VOC exposure differences by facility. Results indicate that average daily traffic (ADT) provides a parsimonious way to characterize the …

Does The Bicycle Detector Symbol Change Cyclist Queuing Position At Signalized Intersections?, Stefan W. Bussey, Christopher M. Monsere, Peter Koonce

Civil and Environmental Engineering Faculty Publications and Presentations

The Manual of Traffic Control Devices (MUTCD) includes a bicycle detector pavement marking (Section 9C-05) and accompanying explanatory sign (R10-22) which may encourage cyclists to position themselves over detection at traffic signals. This paper presents the results of an observational and survey- based study evaluating the bicycle detector marking. Three minor actuated approaches at signalized intersections with significant bicycle volumes and without bicycle detector markings were selected for treatment. Three configurations were compared: 1) bicycle detector marking only 2) bicycle detector marking with the R10-22 explanatory sign, and 3) an alternative bicycle detector installed over a contrasting green rectangle. Analysis …

Exploring Thresholds For Timing Strategies On A Pedestrian Active Corridor, Sirisha Murthy Kothuri, Peter Koonce, Christopher M. Monsere, Titus Reynolds

Civil and Environmental Engineering Faculty Publications and Presentations

Traditional signal timing policies have typically prioritized vehicles over pedestrians at intersections, leading to undesirable consequences such as large delays and risky crossing behaviors. The objective of this paper is to explore signal timing control strategies to reduce pedestrian delay at signalized intersections. The impacts of change in signal controller mode of operation (coordinated vs. free) at intersections were studied using the micro-simulation software VISSIM. A base model was developed and calibrated for an existing pedestrian active corridor. A hypothetical network of three intersections was used to explore the effects of mode of operation and measures of delay for pedestrians …

Evolution And Usage Of The Portal Data Archive: 10-Year Retrospective, Kristin A. Tufte, Robert Bertini, Morgan Harvey

Civil and Environmental Engineering Faculty Publications and Presentations

The Portal transportation data archive (http://portal.its.pdx.edu/) was begun in June 2004 in collaboration with the Oregon Department of Transportation, with a single data source: freeway loop detector data. In 10 years, Portal has grown to contain approximately 3 TB of transportation-related data from a wide variety of systems and sources, including freeway data, arterial signal data, travel times from Bluetooth detection systems, transit data, and bicycle count data. Over its 10-year existence, Portal has expanded both in the type of data that it receives and in the geographic regions from which it gets data. This paper discusses the …

Workshop Synthesis: Built Environment And Contextual Variables, Kelly Clifton, Pascal Perez

Civil and Environmental Engineering Faculty Publications and Presentations

This two-day workshop focused on the important issue of how to define, convey and understand the built environment context as it relates to transport decisions. The field has grown tremendously over the last few decades, fueled in part by the increasing availability of archived spatial data about the environment and geo-referencing activity and travel patterns. But there are persistent issues particularly with inconsistencies in data format or availability across locations that hamper efforts to advance our understanding across regions. Further, there are new challenges in how we communicate context to survey respondents, particularly in stated preference surveys. Much of the …

Empirical Analysis Of Bus Bunching Characteristics Based On Bus Avl/Apc Data, Wei Feng, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Bus bunching takes place when headways between buses are irregular. Bus bunching is associated with longer waiting times for riders, overcrowding in some buses, and an overall decrease on the level of service and capacity. Understanding the temporal and spatial characteristics and the causes and effects of bus bunching incidents from archived bus data can greatly aid transit agencies to develop efficient mitigation strategies. This paper presents methods to identify and visualize specific time periods and segments where bus bunching incidents occur based on automatic vehicle location (AVL) and automatic passenger count (APC) data. The paper also proposes methods that …

Creating A National Nonmotorized Traffic Count Archive: Process And Progress, Krista Nordback, Kristin A. Tufte, Morgan Harvey, Nathan Mcneil, Elizabeth Stolz, Jolene Liu

Civil and Environmental Engineering Faculty Publications and Presentations

Robust bicycle and pedestrian data on a national scale would help promote effective planning and engineering of walking and bicycling facilities, build the evidence-based case for funding such projects, and dispel notions that walking and cycling are not occurring. To organize and promote the collection of nonmotorized traffic data, a team of transportation professionals and computer scientists is creating a national bicycle and pedestrian count archive. This archive will enable data sharing by centralizing continuous and short-duration traffic counts in a publicly available online archive. Although other archives exist, this will be the first archive that will be national in …

Dynamic Ventilation And Power Output Of Urban Bicyclists, Alexander Y. Bigazzi, Miguel A. Figliozzi

Civil and Environmental Engineering Faculty Publications and Presentations

Bicyclist intake of air pollutants is linked to physical exertion levels, ventilation rates, and exposure concentrations. Whereas exposure concentrations have been widely studied in transportation environments, there is relatively scant research linking on-road ventilation with travel conditions and exertion levels. This paper investigates relationships among power output, heart rate, and ventilation rate for urban bicyclists. Heart rate and ventilation rate were measured on-road and combined with power output estimates from a bicycle power model. Dynamic ventilation rates increased by 0.4-0.8% per watt of power output, with a mean lag of 0.8 minutes. The use of physiology (ventilation) monitoring straps and …