Engineering Commons^™

Effectiveness Assessment Of E-Ticketing Technology In Construction Of Transportation Projects, Sharareh Kermanshachi, Karthik Subramanya

Publications

The construction of highway infrastructure has devoted significant resources towards e-Construction to reduce the paperwork and automate the tasks in daily operations. Electronic Ticketing (e-Ticketing) is one such component of e-Construction that aids in the digital transfer of material tickets such as asphalt and concrete which accounts for more than fifty per cent of construction costs. Despite the benefits of e-Ticketing, many state departments and agencies are unwilling to transition into this technology. No studies have identified the cause of the delay in the implementation process, developed a framework to comprehend the platform's full potential, quantified savings, and suggested strategies …

Evaluation Of Tie-Bar Anchoring Methods: Non-Shrink Grout Vs. Epoxy, Wally Heyen, Lieska Halsey, Tim Krason, Brandon Varilek, David Hansen

Nebraska Department of Transportation: Research Reports

Tie bars are epoxy coated steel bars that connect the longitudinal joints in concrete pavement. Tie bars prevent faulting and joint separation between lanes Tie bars can be placed into the plastic concrete or inserted after curing by drilling and anchoring with epoxy or non-shrink grout. The specification for the tie bars requires the use of a No. 5 bar, 18 inches long and shall meet ASTM A775 / A775M [1], Section 1020.The Nebraska Department of Transportation “Standard Specifications for Highway Construction,” (Section 603.03) requires contractors to mechanically insert tie bars into the face of pavements during construction. Tie bars …

Long-Term Performance Evaluation Of Nudeck In Kearney East Bypass, George Morcous, Marc Maguire

Nebraska Department of Transportation: Research Reports

The Kearney East Bypass bridge is the first project that implements the newly developed precast concrete deck system (known as 2nd generation NUDECK). The new system consists of full-depth full-width precast prestressed concrete deck panels that are 12 ft (3.66 m) long each. The panels have covered shear pockets at 4 ft (1.22 m) spacing on each girder line to host clustered shear connectors that are adjustable in height. Narrow unreinforced transverse joints are used to eliminate the need for deck overlay. Also, deck panels are post-tensioned in the longitudinal direction using a new post-tensioning system that eliminates the need …

Evaluation And Enhancement Of Carbon Sequestration Potential Of Existing Vegetation Along Roadsides, Vikram Kapoor, Jeffrey Hutchinson, Samer Dessouky

Publications

The objectives of this study were to evaluate the vegetative composition and carbon sequestration potential of vegetation along a major roadway in Texas. Soil and vegetation were evaluated along IH-35 within Bexar County for composition and carbon content. Three 20 m transects were placed at each site and percent vegetative cover was estimated and above ground plant biomass, and soil was collected from three 0.25 m2 subplots along each transect. Plant and soil samples were analyzed for carbon content. Two non-native grasses, bermudagrass and King Ranch bluestem, were the dominant cover at all sites accounting for > 90% coverage at several …

Performance Evaluation Of Inverted Tee (It) Bridge System, Garrett P. Martindale, Daniel Watson, Antony Mohsen Kamal Masoud Kodsy, Mostafa Abo El-Khier, Richard L. Wood, George Morcous

Nebraska Department of Transportation: Research Reports

The Inverted Tee (IT) girder bridge system was originally developed in 1996 by the University of Nebraska–Lincoln (UNL) researchers and Nebraska Department of Transportation (NDOT) engineers. This bridge system currently accounts for over 110 bridges in Nebraska used for both state highways and local county roads. Extensive longitudinal and transverse deck cracking have been observed and noted in numerous bridge inspection reports. Since the IT girder bridge system is relatively new, limited data and knowledge exist on its structural performance and behavior. This study evaluates the IT girder bridge system by conducting twenty field observations as well as recording accelerometer, …

Restricted Crossings On Rural Highways, John Sangster, Tim Adams

Nebraska Department of Transportation: Research Reports

This study examines the potential for replacing the standard intersection design at two-way stop control (TWSC) and all- way stop control (AWSC) intersections along rural highways with a roundabout or a restricted crossing u-turn (RCUT) facility. The geometry of the RCUT design prohibits left and through movements from the side road, and provides a u-turn location downstream from the main crossing. This type of facility has been implemented for rural highways extensively in both Maryland and North Carolina, as well as in limited cases in many other states such as Minnesota and Missouri, with the potential to serve as a …

34-Inch Tall Three Beam Transition To Concrete Buttress, Scott Rosenbaugh, Wyatt Fallet, Ronald K. Faller, Robert W. Bielenberg, Jennifer Schmidt

Nebraska Department of Transportation: Research Reports

Roadway resurfacing and overlay projects effectively reduce the height of roadside barriers placed adjacent to the roadway, which can negatively affect their crashworthiness. More recently, bridge rails and concrete barriers have been installed with slightly increased heights to account for future overlays. However, adjacent guardrails and approach transitions have not yet been modified to account for overlays. The objective of this project was to develop an increased-height, approach guardrail transition (AGT) to be crashworthy both before and after roadway overlays of up to 3 in. (76 mm).

A 34-in. (864-mm) tall, thrie beam transition was designed such that the system …

Validation Of The Mechanical Rocker Test Method For Ice Melting Capacity (Mrt-Imc), Lieska Halsey, David Hansen

Nebraska Department of Transportation: Research Reports

The anti-icing and deicing industry has interest in the development of an objective, repeatable test procedure for the evaluation and comparison of anti-icing and deicing products. Pursuant to this goal, the Nebraska Department of Transportation (NDOT) funded research at the University of Nebraska-Lincoln (UNL) to investigate methods for evaluating deicing products, beginning in 2011[1]. Researchers at UNL developed the procedure for the Mechanical Rocker Test for Ice Melting Capacity (MRT or MRT-IMC) in 2014[2].

From 2017-2019, NDOT evaluated the MRT-IMC procedure for validity and suitability as a standard test procedure for assessing deicer performance. NDOT also explored opportunities to improve …

Mash Test No. 3-10 Of A Non-Proprietary, High-Tension, Cable Median Barrier For Use In 6h:1v V-Ditch (Test No. Mwp-9), Mojdeh Asadollahi Pajouh, Karla A. Lechtenberg, Ronald K. Faller, James C. Holloway, Robert W. Bielenberg, Scott K. Rosenbaugh

Nebraska Department of Transportation: Research Reports

The Midwest Pooled Fund Program has been developing a prototype design for a non-proprietary, high-tension, cable median barrier for use in a 6H:1V median V-ditch. This system incorporates four evenly spaced cables, Midwest Weak Posts (MWPs) spaced at 8 to 16 ft (2.4 to 4.9 m) intervals, and a bolted, tabbed bracket to attach the cables to each post. Full-scale crash testing was needed to evaluate the barrier’s safety performance. According to the Manual for Assessing Safety Hardware 2016 (MASH) testing matrix for cable barriers installed within a 6H:1V median V-ditch, a series of eight full-scale crash tests are required …

Hot Applied Sealant Bond Test For Joints With Penetrating Sealers, Lieska Halsey

Nebraska Department of Transportation: Research Reports

Recently a concern has been raised for hot applied sealant bond for joints with penetrating sealers. The objective of this study will be to determine if the bond between the sealant and the concrete is compromised by the sealer currently approved to be used in Nebraska. The expected results will be that the bond is not compromised and is serving for the expected joint service life.

Compressive Strength Of Concrete Cylinders By Different Preparation Methods: Sulphur, Neoprene Pads And Grinding, Wally Heyen, Lieska Halsey

Nebraska Department of Transportation: Research Reports

The purpose of this evaluation is to compare the effects of four types of cylinder preparation methods prior to compressive strength testing in accordance to ASTM C 39.

Effectiveness Of Chain Link Turtle Fence And Culverts In Reducing Turtle Mortality And Providing Connectivity Along U.S. Hwy 83, Valentine National Wildlife Refuge, Nebraska, Usa, Marcel P. Huijser, Kari E. Gunson, Elizabeth R. Fairbank

Nebraska Department of Transportation: Research Reports

We evaluated the effectiveness of existing turtle fences through collecting and analyzing turtle mortality data along U.S. Hwy 83, in and around Valentine National Wildlife Refuge, Nebraska, USA. We also investigated the level of connectivity for turtles provided through the culverts that were originally designed to pass water through a capture-mark-recapture experiment. While fenced valley sections had 33.1% fewer turtle observations than unfenced valley sections, the difference was not significant. However, we think that the effectiveness of the fence can be improved through fence repairs, other modifications of the fences, vegetation maintenance, and extending the length of the fences. Four …

Evaluation Of Opportunities And Challenges Of Using Inrix Data For Real-Time Performance Monitoring And Historical Trend Assessment, Anuj Sharma, Vesal Ahsani, Sandeep Rawat

Nebraska Department of Transportation: Research Reports

In recent years there has been a growing desire for the use of probe vehicle technology for congestion detection and general infrastructure performance assessment. Unlike costly traditional data collection by loop detectors, wide-area detection using probe-sourced traffic data is significantly different in terms of measurement technique, pricing, coverage, etc. This affects how the new technology is applied and used to solve current traffic problems such as traffic incident management and roadway performance assessment. This report summarizes the experiences and lessons learned while using probe data for traffic operations and safety management in the state of Nebraska and makes recommendations for …

Assessing Passenger Car Equivalency Factors For High Truck Percentages, Jianan Zhou, Laurence Rilett, Elizabeth Jones

Nebraska Department of Transportation: Research Reports

The Passenger Car Equivalent (PCE) values in the Highway Capacity Manual (HCM) 2010 might not be valid for western Nebraska freeway conditions. This is because: 1) Interstate 80 (I-80) experiences high truck percentages (25% to 60%), while the HCM provides PCE values up to 25% of the truck percentage; 2) the average speed of trucks are observed lower than passenger cars, which is incompatible with the HCM assumption that the free speed of all vehicle types is the same at level terrain; and 3) it is unclear whether the “average” truck used in the simulation study for PCE values in …

Use Of Recycled Crushed Concrete (Rcc) Fines For Potential Soil Stabilization, Lindeman Mark, Varilek Brandon, Lieska Halsey, Rick Gloe, Maria Olomi

Nebraska Department of Transportation: Research Reports

This study evaluated the use of Recycled Crushed Concrete (RCC) Fines for potential soil stabilization. Soil stabilization is the enhancement of subgrade stability to improve the constructability of successive pavement layers. Use of RCC fines may not only provide less costly alternatives for subgrade stabilization, but their use may also alleviate landfill disposal challenges.

Fertilizer Effects On Attaining Vegetation Requirements, Walter H. Schacht, Carol Wienhold

Nebraska Department of Transportation: Research Reports

No abstract provided.

Establishing Permanent Vegetation After Highway Construction, John C. Soper, Walter H. Schacht

Nebraska Department of Transportation: Research Reports

No abstract provided.

Path Clearance For Emergency Vehicles Through The Use Of Vehicle-To-Vehicle Communication, Craig Jordan, Mecit Cetin, R. Michael Robinson

VMASC Publications

The study described in this paper evaluated and tested a new strategy to enable emergency response vehicles (EVs) to navigate through congestion at signalized intersections more efficiently. The proposed strategy involves the use of vehicle-to-vehicle communication to send messages to alert vehicles to the approach of the EV and to provide specific instructions on maneuvering to allow the EV to proceed through congested signalized intersections as quickly as possible. This movement is achieved by creation of a split in the vehicle queue in one lane at a critical location to allow the EV to proceed at its desired speed but …

Analysis Of Existing Work-Zone Sign Supports Using Manual For Assessing Safety Hardware Safety Performance Criteria, Jennifer D. Schmidt, Ronald K. Faller, Karla A. Lechtenberg, Dean L. Sicking

Department of Civil and Environmental Engineering: Faculty Publications

Over the years, numerous work-zone, portable sign support systems have been successfully crash tested according to the Test Level 3 safety performance guidelines provided in the National Cooperative Highway Research Program Report 350 and accepted for use along our nation’s highways. For this study, several crashworthy sign support systems were analyzed to predict their safety performance according to the new evaluation criteria provided in the Manual for Assessing Safety Hardware (MASH). More specifically, this analysis was conducted to determine which hardware parameters negatively affect a system’s safety performance. To verify the accuracy of the analysis, eight systems, four with the …

Reduction Of Stresses On Buried Rigid Highway Structures Using The Imperfect Ditch Method And Expanded Polysterene (Geofoam), Liecheng Sun, Tommy C. Hopkins, Tony L. Beckham

Kentucky Transportation Center Research Report

The study of earth pressure distribution on buried structures has a great practical importance in constructing highway embankments above pipes and culverts. Based on Spangler’s research, the supporting strength of a conduit depends primarily on three factors: 1. The inherent strength of the conduit; 2. The distribution of the vertical load and bottom reaction; and 3. The magnitude and distribution of lateral earth pressures that act against the sides of the structure. Rigid culverts are frequently used in Kentucky for routing streams beneath highway embankments because of rolling and mountainous terrain, numerous streams, shallow depths to bedrock, which creates unyielding …

Monitoring Culvert Load With Shallow Filling Under Geofoam Areas, Charlie Sun, Tommy C. Hopkins

Kentucky Transportation Center Research Report

Geofoam and the “Imperfect Ditch” method can be used effectively on embankment projects to reduce pressures on underground structures when sufficient fill height is available to create an arching effect. When the fill height is too shallow the arching effect cannot be created. However, the pressure acting on the underground structure can still be reduced by making use of the very small unit weight of lightweight geofoam material. In this study, stresses acting on a three-sided culvert were reduced using lightweight geofoam. Initially, the culvert had been designed to carry a 6-foot loading. During construction it was discovered that the …

Evaluation Of A Modified Three Cable Guardrail Adjacent To Steep Slope, Ryan J. Terpsma, Dean L. Sicking, Karla A. Polivka, John R. Rohde, Ronald K. Faller, John D. Reid

Nebraska Department of Transportation: Research Reports

No abstract provided.

Use Of Ultra-Lightweight Geofoam To Reduce Stresses In Highway Culvert Extensions, Liecheng Sun, Tommy C. Hopkins, Tony L. Beckham

Kentucky Transportation Center Research Report

Culvert extension under highway embankment construction is a regular and important practice when roadway widening occurs. At some existing sites, concrete thickness and reinforcing steel of culvert tops and walls were stepped-down in sections of the culvert under the embankment slopes. The part of the culvert positioned under the embankment slopes was constructed weaker because the stresses under the portions of the slopes are much less than the stresses acting on the culvert section located under the main portion of the embankment. When additional fill is placed over the culvert due to roadway widening, much greater stresses are imposed on …

Reduction Of Stresses On Buried Rigid Highway Structures Using The Imperfect Ditch Method And Expanded Polystyrene (Geofoam), Liecheng Sun, Tommy C. Hopkins, Tony L. Beckham

Kentucky Transportation Center Research Report

The study of earth pressure distribution on buried structures has a great practical importance in constructing highway embankments above pipes and culverts. Based on Spangler’s research, the supporting strength of a conduit depends primarily on three factors: 1. the inherent strength of the conduit; 2. the distribution of the vertical load and bottom reaction; and, 3. the magnitude and distribution of lateral earth pressures which act against the sides of the structure. Considering high fills above them and high earth pressures they may experience, rigid culverts are usually used underneath highway embankments. To reduce high vertical earth pressures acting on …

The Use And Performance Of Geogrids In Kentucky, Aric Cowne, Richard Reitenour, David L. Allen, R. Clark Graves

Kentucky Transportation Center Research Report

This report will investigate the history and usage of geogrids, a subfamily of geosynthetics, in Kentucky. The American Society for Testing and Materials (ASTM - 1994) has defined a geosynthetic as a planar product manufactured from a polymeric material used with soil, rock, earth, or other geotechnical-related material as an integral part of a civil engineering project, structure, or system. Geogrids, geosynthetics primarily used for reinforcement, are formed by a regular network of tensile elements with apertures of sufficient size to interlock with surrounding fill material. Geogrids are used as reinforcement by adding tensile strength to a soil matrix, thereby …

Evaluation Of Working Capacity For Disadvantaged Business Enterprises (Dbe) For Highway Construction In Kentucky, Fy 2004 Update, Brad W. Rister, Raymond F. Werkmeister, Paul E. Toussaint

Kentucky Transportation Center Research Report

The Kentucky Transportation Center gathered the appropriate information, performed a series of computations and analyses, prepared the attached documentation, and makes the following recommendations to the Kentucky Transportation Cabinet for their DBE goal for Federal Fiscal year 2004 (October 1, 2003 - September 30, 2004).

KTC recommends an overall DBE goal of 9.26%, of which 1.931% is anticipated to be satisfied by race/gender neutral prime contracts, and the resultant 7.33% should established as race/gender conscious subcontracts. The overall DBE goal figures stated here addresses an adjustment of 1.326% for the positive historical goal variance observed for the past eight years.

Experimental Maintenance Painting On Various Bridge Painting Projects (Kentucky Highway Investigative Task No: 31), Sudhir Palle, Theodore Hopwood Ii

Kentucky Transportation Center Research Report

The Kentucky Transportation Center (KTC) at the University of Kentucky conducted a research study with the Kentucky Transportation Cabinet (KYTC) to monitor various experimental bridge painting projects. The research study Kentucky Highways Investigative Task (KHIT) No: 31 “Experimental Maintenance Painting on Various Bridge Projects During 1997-1998” covered experimental bridge projects completed through the FY 1997 and FY 1998 painting seasons (April 1 through November 15) were monitored and reported. The objectives of the research study were to:

• assess the condition of the existing paint on bridge prior to maintenance painting,
• monitor the project throughout completion,
• note problems and their resolution, …

Experimental Maintenance Painting On Various Bridge Projects: Kentucky Highway Investigative Task 40, Theodore Hopwood Ii, Sudhir Palle, Rick Younce

Kentucky Transportation Center Research Report

The Kentucky Transportation Center (KTC) at the University of Kentucky has performed a series of research studies for the Kentucky Transportation Cabinet (KYTC) to monitor various experimental bridge painting projects and conduct investigative work focusing on new paint systems. The research study addressed in this report “Experimental Maintenance Painting On Various Bridge Projects During 1998-2000” Kentucky Highways Investigative Task No: 40 was intended to address experimental projects in fiscal years 1999 and 2000, but was extended to address certain fieldwork and KYTC inspections through December 31, 2000.

KTC/KYTC Paint Team joint efforts in late 1998 into early 1999 centered on …

Pavement Design Guide: A Short Course, Kentucky Transportation Center

Kentucky Transportation Center Research Report

The purpose of this short course is to provide information to the registered engineer (with no previous background in pavement design or pavement technology) on the structural design of pavements. Included in this course is a summary of background information on the materials used in pavement construction and on the history and evolution of pavement design. Included with this course is an updated Design Guide or catalog to be used for designing new pavements in Kentucky. The intent of the guide or catalog is to provide the road\\ a) designer with a simplified, straightforward methodology for developing structural designs of …

Cost Estimating And Forecasting For Highway Work In Kentucky [1996], James D. Stevens, Jennifer R. Walton

Kentucky Transportation Center Research Report

There is a need for better cost estimating and forecasting for highway work in the Commonwealth of Kentucky. KRS45.245 grants the Interim Joint Committee on Transportation oversight of the biennial highway plan, including a review of all authorized highway project phases that exceed their estimates by 15%. In recent years, the Kentucky Transportation Cabinet has suffered the loss of many resources necessary to produce good cost estimates.

Estimates developed using current methods are not sufficiently accurate to preclude cost overruns in excess of 15%. Over the 1992 and 1994 bienniums, 362 overruns totaling $162,487,511 have been submitted to the Committee. …