Engineering Commons^™

Western Science And Eastern Zen To Seek The Origin Of Truth: Philosophical Background Of Scale Modeling, Kozo Saito

Progress in Scale Modeling, an International Journal

This article was written to introduce philosophical background of scale modeling, where Zen philosophy was applied to overcome the limitation of logical thinking and hypotheses-driven deductive science. Three specific reasons are as follows. The first is related to the law approach in scale modeling; it uses the kufu principle, originated in Zen Buddhism, together with the other three scientific methods: experimental, theoretical, and computational. The second reason is because scale modeling seeks relativistic understanding by attempting to realize similarity; the concept is closer to Eastern philosophy rather than absolute understanding cultivated by deductive science. The third is in the educational …

Tricritical Point As A Crossover Between Type-Is And Type-Iis Bifurcations, Prabakaran Rajamanickam, Joel Daou

Progress in Scale Modeling, an International Journal

A tricritical point as a crossover between (stationary finite-wavelength) type-I_s and (stationary longwave) type-II_s bifurcations is identified in the study of diffusive-thermal (Turing) instability of flames propagating in a Hele-Shaw channel in a direction transverse to a shear flow. Three regimes exhibiting different scaling laws are identified in the neighbourhood of the tricritical point. For these three regimes, sixth-order partial differential equations are obtained governing the weakly nonlinear evolution of unstable solutions near the onset of instability. These sixth-order PDES may be regarded as the substitute for the classical fourth-order Kuramoto­­­­­­–­­Sivashinsky equation which is not applicable near the …

Scale Model Experiments Of Toxic Gas Production From The Combustion Of Polymers When Applied With Different Droplet Sizes Of Water Mist, Nicharee Thinnakornsutubutr, Masayuki Mizuno, Kazunori Kuwana

Progress in Scale Modeling, an International Journal

This research experimentally investigated the combustion of polymeric materials with water mist application in an enclosure, with an emphasis on the production of toxic gases. Two different diameters, ~100 and ~260 μm, were tested. The experimental conditions were determined based on Froude similarity laws for low drop Reynolds number conditions. Droplets and polymers’ physical and chemical properties influence the burning/extinguishing behavior and toxic-gas evolution. In general, larger droplets can extinguish a fire in a shorter time, and toxic gas concentrations in a test chamber decreased more rapidly. However, the large droplets tended to cause the flame expansion phenomenon for thermoplastics …

Peer-To-Peer Energy Trading In Smart Residential Environment With User Behavioral Modeling, Ashutosh Timilsina

Theses and Dissertations--Computer Science

Electric power systems are transforming from a centralized unidirectional market to a decentralized open market. With this shift, the end-users have the possibility to actively participate in local energy exchanges, with or without the involvement of the main grid. Rapidly reducing prices for Renewable Energy Technologies (RETs), supported by their ease of installation and operation, with the facilitation of Electric Vehicles (EV) and Smart Grid (SG) technologies to make bidirectional flow of energy possible, has contributed to this changing landscape in the distribution side of the traditional power grid.

Trading energy among users in a decentralized fashion has been referred …

A Simplified Model For The Intermediate Structure Of Strong Fire Whirls, Forman A. Williams

Progress in Scale Modeling, an International Journal

A model is described for the overall structure of intense fire whirls, based on a spatially evolving vortex, with circulation enhancement driven by the axial acceleration of low-density gas in the core through the axial pressure gradient. The axial acceleration increases the entrainment rate into the core which, through mass conservation, increases the circulation if the angle between the tangential and radial velocity components remains fixed. The two-zone model employs general balance equations for regions inside and outside a cylinder of fixed radius, each inviscid, the inside region being presumed to have a constant density small compared with the (constant) …

Reduced-Scale Experiments And Numerical Simulations Of Informal Settlement Dwelling Fires, Vigneshwaran Narayanan, Antonio Cicicone, Ayden D. Botha, Richard Shaun Walls

Progress in Scale Modeling, an International Journal

Informal settlement dwellings (ISDs) house approximately one billion people in the developing world and this number is expected to double by the year 2030. Contemporary research on ISD fires has focused on understanding the fire dynamics within individual dwellings (micro-scale) and fire spread in settlements consisting of multiple dwellings (macro-scale). This paper aims to do two primary things: investigate if scaling methods that were derived for compartments with thermally thick boundaries can be applied to ISDs (compartments with thermally thin boundaries), and if they can adequately represent the most important phenomena associated with full-scale ISD fires; and demonstrate Fire Dynamics …

A Global Survey Of Infection Control And Mitigation Measures For Combating The Transmission Of Covid-19 Pandemic In Buildings Under Facilities Management Services, Hadi Sarvari, Zhen Chen, Daniel W. M. Chan, Ellyn A. Lester, Nordin Yahaya, Hala Nassereddine, Aynaz Lotfata

Civil Engineering Faculty Publications

Facilities management along with health care are two important aspects in controlling the spread of infectious diseases with regard to controlling the outbreak of global COVID-19 pandemic. Hence, with the increasing outbreak of COVID-19 pandemic, the importance of examining the relationship between the built environment and the outbreak of infectious diseases has become more significant. The aim of the research described in this article is to develop effective infection control and mitigation measures to prevent the transmission of COVID-19 pandemic in the built environment. This study seeks to answer the question of how the facilities management industry can help reduce …

Creating A Field-Wide Forage Canopy Model Using Uavs And Photogrammetry Processing, Cameron Minch, Joseph S. Dvorak, Joshua J. Jackson, Stuart Tucker Sheffield

Biosystems and Agricultural Engineering Faculty Publications

Alfalfa canopy structure reveals useful information for managing this forage crop, but manual measurements are impractical at field-scale. Photogrammetry processing with images from Unmanned Aerial Vehicles (UAVs) can create a field-wide three-dimensional model of the crop canopy. The goal of this study was to determine the appropriate flight parameters for the UAV that would enable reliable generation of canopy models at all stages of alfalfa growth. Flights were conducted over two separate fields on four different dates using three different flight parameters. This provided a total of 24 flights. The flight parameters considered were the following: 30 m altitude with …

Detecting Recent Crop Phenology Dynamics In Corn And Soybean Cropping Systems Of Kentucky, Yanjun Yang, Bo Tao, Liang Liang, Yawen Huang, Christopher J. Matocha, Chad D. Lee, Michael Sama, Bassil El Masri, Wei Ren

Geography Faculty Publications

Accurate phenological information is essential for monitoring crop development, predicting crop yield, and enhancing resilience to cope with climate change. This study employed a curve-change-based dynamic threshold approach on NDVI (Normalized Differential Vegetation Index) time series to detect the planting and harvesting dates for corn and soybean in Kentucky, a typical climatic transition zone, from 2000 to 2018. We compared satellite-based estimates with ground observations and performed trend analyses of crop phenological stages over the study period to analyze their relationships with climate change and crop yields. Our results showed that corn and soybean planting dates were delayed by 0.01 …

Open-Field Scale-Model Experiments Of Fire Whirls Over L-Shaped Line Fires, Yuto Iga, Kazunori Kuwana, Kozo Sekimoto, Yuji Nakamura

Progress in Scale Modeling, an International Journal

This paper presents the results of open-field scale-model experiments of fire-whirl formation over line fires. L-shaped line fires were burned in crosswinds, and the processes of fire-whirl formation were observed. The flame height was measured using an image-processing technique, while two-dimensional velocity components were measured at two different locations using ultrasonic anemometers. Two tests were selected for comparison: test A, in which intense fire whirls repeatedly formed, and test B, in which no whirls were observed. In test A, the wind flow was bent by the fire plume, creating swirling flows near the burning area, thereby forming fire whirls. On …

Effect Of Reduced Plume Entrainment On The Burning Rate Of Porous Fuel Beds, Sara Mcallister

Progress in Scale Modeling, an International Journal

Large outdoor fires often exhibit unexpected fire behavior, particularly compared with much smaller fires. Understanding the difference between large- and small-scale fires is of importance for both fire behavior predictions and safety. Large fires are often characterized by very tall plumes that can extend to the stratosphere. Particularly as the actively burning area increases, plumes in large-scale fires likely entrain relatively little and may act in a similar fashion to a chimney. To explore the possible changes in burning rate due to the chimney effect, experiments were conducted with wood cribs burned with a chimney of variable height. The burning …

Scale Model Test To Estimate Thermal Damage By Fire In Aircraft Cargo, Jian Gao, Tsuneyoshi Matsuoka, Yuji Nakamura

Progress in Scale Modeling, an International Journal

The Federal Aviation Administration (FAA) requires fire detectors to alarm within one minute of the start of a fire in cargo compartments of airplanes. To determine whether such alarm timing works, investigations of the thermal damage to ceilings and other structures during the early stage of a fire were accomplished to demonstrate compliance with these FAA regulations. The objective was to test the feasibility of predicting convective heat transfer in early stage of a cargo compartment fire by conducting reduced scale (lab scale) experiments. First, the scaling laws was derived and validated. Then, full-scale and half-scale experiments were performed with …

Extinguishment Of Diffusion Flames Formed Over A Porous Plate Burner Using Rubber Balloons Filled With Inert Gases, Hiroyuki Torikai, Shinya Kudo

Progress in Scale Modeling, an International Journal

We have proposed an inert gas, rubber-balloon extinguishing method which might increase the effectiveness of extinguishing flames and decreasing the amounts of agents needed for fire suppression. Hence, extinguishing experiments have been performed to further clarify possible extinguishing characteristics, mechanisms and scaling effects of this method. Carbon dioxide, nitrogen, argon and helium gases were used as the extinguishing agents. Methane-air and propane-air diffusion flames were formed on two different diameter, round porous plate burner and used as the targets for extinguishment. The extinguishing probabilities were measured, and the extinguishing processes were observed with a high-speed camera. As a result, an …

Effects Of Dimensionless Numbers On Decomposition Of Methane Hydrate, Shoma Shimizu, Genichiro Kushida

Progress in Scale Modeling, an International Journal

It is necessary to elucidate the decomposition and combustion of methane hydrate for fire safety during transportation and storage to utilize it for commercial practice. The amount of methane evolved during the decomposition of methane hydrates is affected by the conditions such as the initial temperature, initial density and ambient temperature. In the present study, the internal temperature of methane hydrate and the amount of methane evolved during its decomposition were investigated by a dimensionless numerical analysis using a transient one-dimensional conduction model from a symmetrical methane hydrate ball heated by ambient air. The numerically calculated central temperature and the …

A Study On Fire Hazards Of Oil Tanks In Urban Areas With Scale Model Experiments, Ho Yin Ng, Yu Wan, Wan Ki Chow

Progress in Scale Modeling, an International Journal

Large fuel tanks are located in an urban area of Tsing Yi in Hong Kong, giving potentially high risks to people living nearby if a fire was to occur. Scale modeling experiments were carried out to investigate the potential of fire hazards. Propanol pool fires with five different scales of oil tanks were studied first. Appropriate tank sizes were then put in a 1/2500 architectural scale model on the Tsing Yi Island to study a fuel tank fire. Results show that the heat and smoke from a fire would affect occupants staying in areas near to the fuel tanks. Fire …

Fingering Behavior Of Flame Spread Over Solid Combustibles, Tsuneyoshi Matsuoka, Kentaro Nakashima, Takuma Kajimoto, Akihiro Yoshimasa, Yuji Nakamura

Progress in Scale Modeling, an International Journal

In this study, the fingering pattern formation and the following flamelet spreading over three different kinds of thick combustibles, i.e., Poly methacrylate (PMMA), Poly ethylene (PE) and Poly carbonate (PC) were observed and the effective Lewis number correlation was validated. Experiments were performed with a narrow channel apparatus. In addition to the kinds of solid fuel materials, the channel height and the oxidizer velocity were varied as experimental parameters. An image analysis method was developed to quantify the number, diameter and spread rate of the flamelets. Replacing the fuel thickness into the thermal thickness, the effective Lewis number which is …

Data-Driven Tools Guided By First-Principles For Scale Modeling, Sadegh Poozesh

Progress in Scale Modeling, an International Journal

For decades, traditional scale-modeling techniques have been relying on first-principles models (FPMs). FPMs have been used to find non-dimensional numbers (PIs) and identify normalized underlying forces and energies behind the phenomenon in focus. The two main challenges with FPM-based PIs extraction are finding the relevant PIs and proper correlations between PIs. The emergence and surge of data-driven modeling (DDM) provide a new opportunity to leverage experimental data in model development across scales/plants. In this paper, first, the two mentioned issues in PIs development will be elaborated to reveal the gap, and second, a new insight into scale modeling and similarity …

A User Study Of A Wearable System To Enhance Bystanders’ Facial Privacy, Alfredo J. Perez, Sherali Zeadally, Scott Griffith, Luis Y. Matos Garcia, Jaouad A. Mouloud

Information Science Faculty Publications

The privacy of users and information are becoming increasingly important with the growth and pervasive use of mobile devices such as wearables, mobile phones, drones, and Internet of Things (IoT) devices. Today many of these mobile devices are equipped with cameras which enable users to take pictures and record videos anytime they need to do so. In many such cases, bystanders’ privacy is not a concern, and as a result, audio and video of bystanders are often captured without their consent. We present results from a user study in which 21 participants were asked to use a wearable system called …

The Model Area In Successful Lean Transformation And Scale Modeling, William Cooper, M. Abbot Maginnis, David Parsley, Kozo Saito

Progress in Scale Modeling, an International Journal

The True Lean System Program at the University of Kentucky was created in 1994 to study how the development of the Toyota Production System (TPS) contributes to Toyota’s success. This increased understanding of Toyota’s experience would provide useful guidance to Western companies taking on the challenges of replicating Toyota’s success within their own organizations. The common struggle point shared by the companies who come to us is their inability to establish sustainable TPS-based Lean transformations throughout their organizations. Our work with these companies along with our study of Toyota’s own experience in bringing TPS to its own American operations has …

Barn-Raising On The Digital Frontier: The L.A.U.N.C.H. Collaborative, Bradford W. Hesse, David Ahern, Michele Ellison, Eliah Aronoff-Spencer, Robin C. Vanderpool, Karen Onyeije, Michael C. Gibbons, Timothy W. Mullett, Ming-Yuan Chih, Victoria Attencio, Grant Patterson, Jessica Boten, Christopher Hartshorn, Ben Bartolome, Katie Gorscak, Melanie Mccomsey, Alexandra Hubenko, Bin Huang, Corey Baker, Don Norman

Journal of Appalachian Health

A meta-analysis of oncology papers from around the world revealed that cancer patients who lived more than 50 miles away from hospital centers routinely presented with more advanced stages of disease at diagnosis, exhibited lower adherence to prescribed treatments, presented with poorer diagnoses, and reported a lower quality of life than patients who lived nearer to care facilities. Connected health approaches—or the use of broadband and telecommunications technologies to evaluate, diagnose, and monitor patients beyond the clinic—are becoming an indispensable tool in medicine to overcome the obstacle of distance.

Estimating Free-Flow Speed With Lidar And Overhead Imagery, Armin Hadzic

Theses and Dissertations--Computer Science

Understanding free-flow speed is fundamental to transportation engineering in order to improve traffic flow, control, and planning. The free-flow speed of a road segment is the average speed of automobiles unaffected by traffic congestion or delay. Collecting speed data across a state is both expensive and time consuming. Some approaches have been presented to estimate speed using geometric road features for certain types of roads in limited environments. However, estimating speed at state scale for varying landscapes, environments, and road qualities has been relegated to manual engineering and expensive sensor networks. This thesis proposes an automated approach for estimating free-flow …

Safety Concepts For Every Ride: A Statistical Ensemble Simulation To Mitigate Rotational Falls In Eventing Cross Country, Shannon Wood

Theses and Dissertations--Mechanical Engineering

Rotational falls are the leading cause of death and serious injury in the equestrian sport of eventing. Previous studies to develop safety devices used physical models representing one or at most several physical situations leading to different designs and no common understanding. In this thesis, a statistical ensemble model is developed and applied to generate and evaluate 10,000 different situations that might potentially lead to rotational falls. For accurate statistical representation of the horse and rider inertia distributions, measurements of over 400 training or competing horses and riders were recorded and incorporated. Video was recorded of 218 total competitors approaching …

Tolerance Intervals For Time Series Models And Specifying Trimming/Winsorizing Cutoffs, Kedai Cheng

Theses and Dissertations--Statistics

Confidence intervals are used to capture a parameter of interest, usually a mean or a quantile, at a specified confidence level. Prediction intervals are another practical interval that aim at making sound predictions of future values with some confidence. Although these are useful inference tools, neither of them gives people a plausible range of the sampled population. Tolerance intervals are such an inference tool that captures a specified proportion of the sampled population at a predetermined confidence level. In this dissertation, tolerance intervals for an autoregressive process with order p are constructed. In addition, a method of utilizing tolerance interval …

Post-Acquisition Processing Confounds In Brain Volumetric Quantification Of White Matter Hyperintensities, Ahmed A. Bahrani, Omar M. Al-Janabi, Erin L. Abner, Shoshana H. Bardach, Richard J. Kryscio, Donna M. Wilcock, Charles D. Smith, Gregory A. Jicha

Neurology Faculty Publications

BACKGROUND: Disparate research sites using identical or near-identical magnetic resonance imaging (MRI) acquisition techniques often produce results that demonstrate significant variability regarding volumetric quantification of white matter hyperintensities (WMH) in the aging population. The sources of such variability have not previously been fully explored.

NEW METHOD: 3D FLAIR sequences from a group of randomly selected aged subjects were analyzed to identify sources-of-variability in post-acquisition processing that can be problematic when comparing WMH volumetric data across disparate sites. The methods developed focused on standardizing post-acquisition protocol processing methods to develop a protocol with less than 0.5% inter-rater variance.

RESULTS: A series …

Do Transportation Network Companies Decrease Or Increase Congestion?, Gregory D. Erhardt, Sneha Roy, Drew Cooper, Bhargava Sana, Mei Chen, Joe Castiglione

Civil Engineering Faculty Publications

This research examines whether transportation network companies (TNCs), such as Uber and Lyft, live up to their stated vision of reducing congestion in major cities. Existing research has produced conflicting results and has been hampered by a lack of data. Using data scraped from the application programming interfaces of two TNCs, combined with observed travel time data, we find that contrary to their vision, TNCs are the biggest contributor to growing traffic congestion in San Francisco. Between 2010 and 2016, weekday vehicle hours of delay increased by 62% compared to 22% in a counterfactual 2016 scenario without TNCs. The findings …

A Historical Sedimentary Record Of Mercury In A Shallow Eutrophic Lake: Impacts Of Human Activities And Climate Change, Hanxiao Zhang, Shouliang Huo, Kevin M. Yeager, Beidou Xi, Jingtian Zhang, Fengchang Wu

Earth and Environmental Sciences Faculty Publications

Mercury and its derivatives are hazardous environmental pollutants and could affect the aquatic ecosystems and human health by biomagnification. Lake sediments can provide important historical information regarding changes in pollution levels and thus trace anthropogenic or natural influences. This research investigates the 100-year history of mercury (Hg) deposition in sediments from Chao Lake, a shallow eutrophic lake in China. The results indicate that the Hg deposition history can be separated into three stages (pre-1960s, 1960s–1980s, and post-1980s) over the last 100 years. Before the 1960s, Hg concentrations in the sediment cores varied little and had no spatial difference. Since the …

Advanced Recurrent Network-Based Hybrid Acoustic Models For Low Resource Speech Recognition, Jian Kang, Wei-Qiang Zhang, Wei-Wei Liu, Jia Liu, Michael T. Johnson

Electrical and Computer Engineering Faculty Publications

Recurrent neural networks (RNNs) have shown an ability to model temporal dependencies. However, the problem of exploding or vanishing gradients has limited their application. In recent years, long short-term memory RNNs (LSTM RNNs) have been proposed to solve this problem and have achieved excellent results. Bidirectional LSTM (BLSTM), which uses both preceding and following context, has shown particularly good performance. However, the computational requirements of BLSTM approaches are quite heavy, even when implemented efficiently with GPU-based high performance computers. In addition, because the output of LSTM units is bounded, there is often still a vanishing gradient issue over multiple layers. …

Compact Hardware Implementation Of A Sha-3 Core For Wireless Body Sensor Networks, Yi Yang, Debiao He, Neeraj Kumar, Sherali Zeadally

Information Science Faculty Publications

One of the most important Internet of Things applications is the wireless body sensor network (WBSN), which can provide universal health care, disease prevention, and control. Due to large deployments of small scale smart sensors in WBSNs, security, and privacy guarantees (e.g., security and safety-critical data, sensitive private information) are becoming a challenging issue because these sensor nodes communicate using an open channel, i.e., Internet. We implement data integrity (to resist against malicious tampering) using the secure hash algorithm 3 (SHA-3) when smart sensors in WBSNs communicate with each other using the Internet. Due to the limited resources (i.e., storage, …

Spatial Distribution Of Partner-Seeking Men Who Have Sex With Men Using Geosocial Networking Apps: Epidemiologic Study, Angel B. Algarin, Patrick J. Ward, W. Jay Christian, Abby E. Rudolph, Ian W. Holloway, April M. Young

Epidemiology and Environmental Health Faculty Publications

Background: Geosocial networking apps have made sexual partner-seeking easier for men who have sex with men, raising both challenges and opportunities for human immunodeficiency virus and sexually transmitted infection prevention and research. Most studies on men who have sex with men geosocial networking app use have been conducted in large urban areas, despite research indicating similar patterns of online- and app-based sex-seeking among men who have sex with men in rural and midsize cities.

Objective: The goal of our research was to examine the spatial distribution of geosocial networking app usage and characterize areas with increasing numbers of partner-seeking men …

Performance Evaluation Of Energy-Autonomous Sensors Using Power-Harvesting Beacons For Environmental Monitoring In Internet Of Things (Iot), George Dan Moiş, Teodora Sanislav, Silviu Corneliu Folea, Sherali Zeadally

Information Science Faculty Publications

Environmental conditions and air quality monitoring have become crucial today due to the undeniable changes of the climate and accelerated urbanization. To efficiently monitor environmental parameters such as temperature, humidity, and the levels of pollutants, such as fine particulate matter (PM2.5) and volatile organic compounds (VOCs) in the air, and to collect data covering vast geographical areas, the development of cheap energy-autonomous sensors for large scale deployment and fine-grained data acquisition is required. Rapid advances in electronics and communication technologies along with the emergence of paradigms such as Cyber-Physical Systems (CPSs) and the Internet of Things (IoT) have led to …