Engineering Commons^™

Drone Detection Using Yolov5, Burchan Aydin, Subroto Singha

Faculty Publications

The rapidly increasing number of drones in the national airspace, including those for recreational and commercial applications, has raised concerns regarding misuse. Autonomous drone detection systems offer a probable solution to overcoming the issue of potential drone misuse, such as drug smuggling, violating people’s privacy, etc. Detecting drones can be difficult, due to similar objects in the sky, such as airplanes and birds. In addition, automated drone detection systems need to be trained with ample amounts of data to provide high accuracy. Real-time detection is also necessary, but this requires highly configured devices such as a graphical processing unit (GPU). …

Low-Cost Uav Swarm For Real-Time Object Detection Applications, Joel Valdovinos Miranda

Master's Theses

With unmanned aerial vehicles (UAVs), also known as drones, becoming readily available and affordable, applications for these devices have grown immensely. One type of application is the use of drones to fly over large areas and detect desired entities. For example, a swarm of drones could detect marine creatures near the surface of the ocean and provide users the location and type of animal found. However, even with the reduction in cost of drone technology, such applications result costly due to the use of custom hardware with built-in advanced capabilities. Therefore, the focus of this thesis is to compile an …

Outdoor Operations Of Multiple Quadrotors In Windy Environment, Deepan Lobo

Dissertations

Coordinated multiple small unmanned aerial vehicles (sUAVs) offer several advantages over a single sUAV platform. These advantages include improved task efficiency, reduced task completion time, improved fault tolerance, and higher task flexibility. However, their deployment in an outdoor environment is challenging due to the presence of wind gusts. The coordinated motion of a multi-sUAV system in the presence of wind disturbances is a challenging problem when considering collision avoidance (safety), scalability, and communication connectivity. Performing wind-agnostic motion planning for sUAVs may produce a sizeable cross-track error if the wind on the planned route leads to actuator saturation. In a multi-sUAV …

Design And Control Of Next-Generation Uavs For Effectively Interacting With Environments, Caiwu Ding

Dissertations

In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as …

Evaluating The Potential Of Drone Swarms In Nonverbal Hri Communication, Kasper Grispino, Damian Lyons, Truong-Huy Nguyen

Faculty Publications

Human-to-human communications are enriched with affects and emotions, conveyed, and perceived through both verbal and nonverbal communication. It is our thesis that drone swarms can be used to communicate information enriched with effects via nonverbal channels: guiding, generally interacting with, or warning a human audience via their pattern of motions or behavior. And furthermore that this approach has unique advantages such as flexibility and mobility over other forms of user interface. In this paper, we present a user study to understand how human participants perceived and interpreted swarm behaviors of micro-drone Crazyflie quadcopters flying three different flight formations to bridge …

Routing Algorithm For The Ground Team In Transmission Line Inspection Using Unmanned Aerial Vehicle, Yu Li

Masters Theses

"With the rapid development of robotics technology, robots are increasingly used to conduct various tasks by utility companies. An unmanned aerial vehicle (UAV) is an efficient robot that can be used to inspect high-voltage transmission lines. UAVs need to stay within a data transmission range from the ground station and periodically land to replace the battery in order to ensure that the power system can support its operation. A routing algorithm must be used in order to guide the motion and deployment of the ground station while using UAV in transmission line inspection. Most existing routing algorithms are dedicated to …

Design And Implementation Of An Artificial Neural Network Controller For Quadrotor Flight In Confined Environment, Ahmed Mekky

Mechanical & Aerospace Engineering Theses & Dissertations

Quadrotors offer practical solutions for many applications, such as emergency rescue, surveillance, military operations, videography and many more. For this reason, they have recently attracted the attention of research and industry. Even though they have been intensively studied, quadrotors still suffer from some challenges that limit their use, such as trajectory measurement, attitude estimation, obstacle avoidance, safety precautions, and land cybersecurity. One major problem is flying in a confined environment, such as closed buildings and tunnels, where the aerodynamics around the quadrotor are affected by close proximity objects, which result in tracking performance deterioration, and sometimes instability. To address this …

Force-Canceling Mixer Algorithm For Vehicles With Fully-Articulated Radially Symmetric Thruster Arrays, Joseph Nicholas Casabona

Electronic Theses and Dissertations

A new type of fully-holonomic aerial vehicle is identified and developed that can optionally utilize automatic cancellation of excessive thruster forces to maintain precise control despite little or no throttle authority. After defining the physical attributes of the new vehicle, a flight control mixer algorithm is defined and presented. This mixer is an input/output abstraction that grants a flight control system (or pilot) full authority of the vehicle's position and orientation by means of an input translation vector and input torque vector. The mixer is shown to be general with respect to the number of thrusters in the system provided …

Autonomous Uav Battery Swapping, Reed Jacobsen, Nikolai Ruhe, Nathan Dornback

Williams Honors College, Honors Research Projects

One of the main hindrances of unmanned aerial vehicle (UAV) technology are power constraints. One way to alleviate some power constraints would be for two UAVs to exchange batteries while both are in flight. Autonomous mid-air battery swapping will expand the scope of UAV technology by allowing for indefinite flight times and longer missions. A single board computer will control each UAV’s flight software to respond to inputs to align with each other mid-flight. When the two UAVs have joined, mechanical components will exchange a depleted battery on the worker UAV for a freshly charged battery that belongs to the …

System Identification Of A Circulation Control Unmanned Aerial Vehicle, Mohammed Agha

Electronic Theses and Dissertations

The advancement in automation and sensory systems in recent years has led to an increase the demand of UAV missions. Due to this increase in demand, the research community has gained interest in investigating UAV performance enhancing systems. Circulation Control (CC), which is an active control flow method used to enhance UAV lift, is a performance enhancing system currently studied. In prior research, experimental studies have shown that Circulation Control wings (CCW) implemented on class-I UAVs can reduce take-off distance by 54%. Wind tunnel tests reveal that CC improves aircraft payload capabilities through lift enhancement. Increasing aircraft payload capabilities causes …

Heterogeneous Multi-Sensor Fusion For 2d And 3d Pose Estimation, Hanieh Deilamsalehy

Dissertations, Master's Theses and Master's Reports

Sensor fusion is a process in which data from different sensors is combined to acquire an output that cannot be obtained from individual sensors. This dissertation first considers a 2D image level real world problem from rail industry and proposes a novel solution using sensor fusion, then proceeds further to the more complicated 3D problem of multi sensor fusion for UAV pose estimation.

One of the most important safety-related tasks in the rail industry is an early detection of defective rolling stock components. Railway wheels and wheel bearings are two components prone to damage due to their interactions with the …

Data Fusion For Vision-Based Robotic Platform Navigation, Andrés F. Echeverri

Master's Theses (2009 -)

Data fusion has become an active research topic in recent years. Growing computational performance has allowed the use of redundant sensors to measure a single phenomenon. While Bayesian fusion approaches are common in general applications, the computer vision community has largely relegated this approach. Most object following algorithms have gone towards pure machine learning fusion techniques that tend to lack flexibility. Consequently, a more general data fusion scheme is needed. The motivation for this work is to propose methods that allow for the development of simple and cost effective, yet robust visual following robots capable of tracking a general object …

Flying By Fire: Making Controlled Burns Safer For Humans And Uavs, Rebecca Horzewski, Carrick Detweiler

UCARE Research Products

A temperature sensing circuit board was developed that will allow Nimbus Lab's controlled burn starting UAV to react to the temperatures around it.

Application Of Simultaneous Localization And Mapping Algorithms For Haptic Teleoperation Of Aerial Vehicles, Bandar Hulayyil Aldhafeeri

Electronic Thesis and Dissertation Repository

In this thesis, a new type of haptic teleoperator system for remote control of Unmanned Aerial Vehicles (UAVs) has been developed, where the Simultaneous Localization and Mapping (SLAM) algorithms are implemented for the purpose of generating the haptic feedback. Specifically, the haptic feedback is provided to the human operator through interaction with artificial potential field built around the obstacles in the virtual environment which is located at the master site of the teleoperator system. The obstacles in the virtual environment replicate essential features of the actual remote environment where the UAV executes its tasks. The state of the virtual environment …

Invariant Inferring And Monitoring In Robotic Systems, Hengle Jiang

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

System monitoring can help to detect abnormalities and avoid failures. Crafting monitors for today’s robotic systems, however, can be very difficult due to the systems’ inherent complexity and its rich operating environment.

In this work we address this challenge through an approach that automatically infers system invariants and synthesizes those invariants into monitors. This approach is inspired by existing software engineering approaches for automated invariant inference, and it is novel in that it derives invariants by observing the messages passed between system nodes and the invariants types are tailored to match the spatial, time, temporal, and architectural attributes of robotic …

Analysis, Optimization, And Implementation Of A Uav-Based Wireless Power Transfer System, Andrew Mittleider

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Wireless power transfer is rapidly advancing in its ability to efficiently transfer power to a variety of devices.

As the efficiency increases, more applications for these systems arise. Since magnetic resonant wireless power transfer can only transfer a small amount of power, most current applications only focus on powering low-powered devices.

Wireless Sensor Networks are composed of many low-powered nodes which currently require human interaction to remain powered. We propose recharging a low-powered Wireless Sensor Network (WSN) with a magnetic resonant wireless power transfer system attached to a quadrotor Unmanned Aerial Vehicle (UAV).

This thesis addresses three main challenges with …

Autonomous Aerial Water Sampling, John-Paul W. Ore

Department of Computer Science and Engineering: Dissertations, Theses, and Student Research

Obtaining spatially separated, high frequency water samples from rivers and lakes is critical to enhance our understanding and effective management of fresh water resources. In this thesis we present an aerial water sampler and verify the system in field experiments. The aerial water sampler has the potential to vastly increase the speed and range at which scientists obtain water samples while reducing cost and effort. The water sampling system includes: 1) a mechanism to capture three 20 ml samples per mission; 2) sensors and algorithms for safe navigation and altitude approximation over water; and 3) software components that integrate and …

Cooperative Remote Sensing And Actuation Using Networked Unmanned Vehicles, Haiyang Chao

All Graduate Theses and Dissertations, Spring 1920 to Summer 2023

This dissertation focuses on how to design and employ networked unmanned vehicles for remote sensing and distributed control purposes in the current information-rich world. The target scenarios are environmental or agricultural applications such as river/reservoir surveillance, wind profiling measurement, and monitoring/control of chemical leaks, etc. AggieAir, a small and low-cost unmanned aircraft system, is designed based on the remote sensing requirements from environmental monitoring missions. The state estimation problem and the advanced lateral flight controller design problem are further attacked focusing on the small unmanned aerial vehicle (UAV) platform. Then the UAV-based remote sensing problem is focused with further flight …

Lyapunov-Based Coordinated Control Of An Underactuated Unmanned Aerial Vehicle And Robot Manipulator, Dongbin Lee

All Dissertations

This Ph.D. dissertation describes nonlinear tracking control results for a quadrotor helicopter unmanned aerial vehicle (UAV) towards the ultimate goal of controlling a combined UAV plus robot manipulator system (UAVRM). The quadrotor UAV is a helicopter that has four independent rotors that provide vertical lift: these four independent forces are managed in order to directly provide lift, pitch, roll, and yaw of the vehicle. Horizontal translations result from pitch and roll actions, the system is underactuated in the sense that there are only four control inputs to move the six degree-of-freedom aircraft. There are exising dynamic models of the quadrotor …