Engineering Commons^™

Effect Of Extracellular Matrix (Ecm) Protein Micropatterns On The Behavior Of Human Neuroblastoma Cells, Ishwari Poudel

Department of Engineering Mechanics: Dissertations, Theses, and Student Research

Recent advances in patterning techniques and emerging surface microtechnologies have allowed cell micropatterning to control spatial location of the cells on a surface as well as cell shape, attachment area, and number of contacting neighbor cells. These parameters play important roles in cell cellular behaviors. Cell micropatterning has thus become one of the most important strategies for biomedical applications, such as, tissue engineering, diagnostic immunoassays, lab-on-chip devices, bio-sensing, etc., and cell biology studies as well. For neuronal cells, there have been attempts to distribute neuronal cells on specific patterns to control cell-to-cell interaction. However, there have been very limited understanding …

Modeling And Control Of A Flexible Ionic Polymer Metal Composite(Ipmc) Actuator For Underwater Propulsion, Shivakanth Gutta

UNLV Theses, Dissertations, Professional Papers, and Capstones

The goal of this research is to model and control the underwater vehicle propelled by IPMC actuator. IPMC consists of an ionic membrane sandwiched between two metallic electrodes. When an external voltage is applied, IPMC undergoes large deformation due to transport of ions. Due to its ability to work in aqueous environments, it can be used for developing small scale underwater vehicles.

First, Finite element approach is used to describe the dynamics of the both single and segmented IPMC actuator. In the approach presented, each element is attached with a local coordinate system that undergoes rigid body motion along with …

Direct Contact Pyrolysis Of Hydrocarbons: A Source Of Hydrogen And Interesting Carbon Formations, Peter G. Faught

UNLV Theses, Dissertations, Professional Papers, and Capstones

The work detailed in this document looks at a novel liquid metal supported catalytic system for the generation of hydrogen by decomposition of ethanol through direct contact pyrolysis. The hydrogen is produced at relatively low temperatures (500-600°C) and has carbon and water as co-products. It should be noted that CO is not observed as a product at these low temperatures. This is to be contrasted with the hydrogen produced at higher temperature from ethanol which does contain carbon monoxide. The presence of carbon monoxide in hydrogen complicates fuel cell operation and catalytic chemical processes. Thus, the lack of CO in …

Mechanistic Mixed-Mode Failure Criterion For Continuous Fiber-Polymer Composites, Thomas P. Bruce

Electronic Thesis and Dissertation Repository

Design of continuous fiber-polymer composite components with optimized and predictable energy dissipation requires a failure criterion able to predict the fracture energy of CFP composites for all mixed-mode loading conditions. Existing mixed-mode failure criteria are empirical and show poor correlation for a range of CFP composites. Therefore, a universally applicable criterion based on constituent material properties and operative failure mechanisms is required. A novel mechanistic failure criterion for CFP composites is proposed. The criterion considers resin fracture strength, hackle formation, interfacial debonding, the crack tip plastic zone and interply vs interyarn delamination. Experimental data obtained by mixed-mode testing of continuous …

Response Characterization Of Electroactive Polymers As Mechanical Sensors, G. Alici, Geoffrey M. Spinks, J. D. Madden, Y. Wu, G G. Wallace

Gordon Wallace

The characterization of the dynamic response (including transfer function identification) of trilayer polypyrrole (PPy) type conducting polymer sensors is presented. The sensor was built like a cantilever beam with the free end stimulated through a mechanical lever system, which provided displacement inputs. The voltage generated and current passing between the two outer PPy layers as a result of the input was measured to model the output/input behavior of the sensors based on their experimental current/displacement and voltage/displacement frequency responses. We specifically targeted the low-frequency behavior of the sensor as it is a relatively slowsystem. Experimental transfer function models were generated …

Testing, Modelling And Validation Of Numerical Model Capable Of Predicting Stress Fields Throughout Polyurethane Foam, Conor Briody, Barry Duignan, Stephen Jerrams

Conference Papers

Wheelchair seating systems are specialised for a number of reasons as users can have impaired mobility, which increases the possibility of pressure build up. These areas of high pressure frequently occur in the trunk region under the bony prominences known as the Ischial Tuberosities (IT), pressure ulcers may occur consequently. Polyurethane foam has been in use for some time in wheelchair seating systems as it exhibits good pressure relieving capabilities in most cases. However, little quantitative research has gone into foamed polymers, in comparison with conventional elastomeric materials. This lack of knowledge can ultimately lead to more time being spent …

Strong Spin Orbital Coupling Effect On Magnetic Field Response Generated By Intermolecular Excited States In Organic Semiconductors, Liang Yan

Doctoral Dissertations

It has been found that non-magnetic organic semiconductors can show some magnetic responses in low magnetic field (<100 >mT). When applying magnetic field, the electroluminescence, electrical current, photocurrent, and photoluminescence could change with magnetic field, which are called magnetic field effects.

Magnetic field effects are generated through spin-dependent process affected by the internal magnetic interaction. In nonmagnetic materials, hyperfine interaction has been supposed to dominantly affect the spin-dependent process recently. But the conclusion was made in weak spin-orbital coupling organic semiconductor. The hyperfine interaction might not be the main reason responsible for magnetic field effects in strong spin-orbital coupling materials. …

Roles Of Polymer Crosslinking Density And Crystallinity In Regulating Surface Characteristics And Pre-Osteoblastic Mc3t3 Cell Behavior, Kan Wang

Doctoral Dissertations

This dissertation presents material design strategies to investigate cell-biomaterial interactions on specific biocompatible polymers and polymer blends by using mouse pre-osteoblastic MC3T3 cells aiming for potential applications in bone tissue engineering. Chapter 1 reviews some related background knowledge including polymeric biomaterials for tissue engineering, cell-biomaterial interaction, synthetic photo-crosslinkable and degradable polymers, and the effect of surface features on osteoblast cell responses. Chapter 2 presents photo-crosslinkable composites of poly(propylene fumarate) (PPF), an injectable and biodegradable polyester, and methacryl-polyhedral oligomeric silsesquioxane (mPOSS), which has eight methacryl groups tethered with a cage-like hybrid inorganic-organic nanostructure, for bone tissue engineering applications. Blending mPOSS with …

Morphology Changes In Pcpdtbt:Pcbm And P3ht:Pcpdtbt:Pcbm And Its Effect On Polymer Solar Cell Performance, Galen David Cauble

Physics

Polymer solar cell morphology is sensitive to both heat and time. By thermally annealing polymer solar cells the morphology of the devices can be altered causing immediate changes in device performance. Blending PCPDTBT:PCBM with P3HT:PCPDTBT combines the absorption characteristics of each to create a more even absorption spectrum. Subjecting PCPDTBT:PCBM, and P3HT:PCPDTBT:PCBM polymer solar cells to thermal annealing as well as recording device performance through time has shown that P3HT:PCPDTBT:PCBM devices react positively to thermal annealing (increasing from 0.8% to 1.4%) while PCPDTBT:PCBM devices have varied reactions. Furthermore, the P3HT:PCPDTBT:PCBM devices have achieved efficiencies of 1.6% in AM 1.5 compared …

Quantitative Analysis Of The Reaction Between Gliadin And Citric Acid Under Weak Acidic And Weak Alkaline Conditions, Wei Li

Department of Biological Systems Engineering: Dissertations and Theses

Gliadin was reacted with citric acid under weak acidic and weak alkaline conditions in both wet and dry states and the reaction mechanism was studied. The low morphological stability in an aqueous environment and inferior mechanical properties have restricted the applications of plant proteins, although these materials possess a unique structure, biocompatibility and biodegradability. Carboxylic acids such as citric acid are inexpensive and nontoxic chemicals and are preferred for crosslinking proteins and cellulose to improve the desired properties of the materials.

In this study, gliadin was chosen as a model of plant proteins to react with citric acid. However, previous …

Improving The Efficiency Of Organic Solar Cells By Varying The Material Concentration In The Photoactive Layer, Kevin Anthony Latimer

Electrical & Computer Engineering Theses & Dissertations

Polymer-fullerene bulk heterojunction solar cells have been a rapidly improving technology over the past decade. To further improve the relatively low energy conversion efficiencies of these solar cells, several modifications need to be made to the overall device structure. Emerging technologies include cells that are fabricated with interfacial layers to facilitate charge transport, and tandem structures are being introduced to harness the absorption spectrum of polymers with varying bandgap energies.

When new structures are implemented, each layer of the cell must be optimized in order for the entire device to function efficiently. The most volatile layer of these devices is …

The Effects Of Humidity On The Dielectric Response In Ferroelectric Polymer Films Made By Langmuir-Blodgett Deposition, Kristin Kraemer, Alexander Sorokin, Christina Othon, Stephen Ducharme, Vladimir Fridkin

Christina M Othon

No abstract provided.

Electron Irradiation Effects On Ferroelectric Copolymer Langmuir-Blodgett Films, Christina M. Othon, Stephen Ducharme

Christina M Othon

The effect of irradiation on the ferroelectric properties of Langmuir-Blodgett films of the copolymer poly(vinylidene fluoride-trifluorethelene) is investigating using 1.26 MeV electrons with dosages from 16 to 110 Mrad. Irradiation causes a systematic decrease in the phase transition temperature, coercive field and polarization of these thin films.

Artificial Muscle Project: Process Development Of Polydimethyl Siloxane Thin Films For Use In Dielectric Electroactive Polymer Artificial Muscle Actuators, Vincent J. Gayotin, Richard W. Morrison, Paul A. Preisser

Materials Engineering

An artificial muscle design was created founded on the principles of a dielectric electroactive polymer (DEAP), which is fundamentally similar to a capacitor. A polydimethyl siloxane (PDMS)-based elastomer, Sylgard 184 from Dow Corning, was chosen for the design and spun coat onto polystyrene (PS) Petri dishes at varying speeds to create a thin film, using speeds of 2000 rpm, 3000 rpm, 4000 rpm, 5000 rpm, and 6000 rpm. The film thicknesses were measured optically through use of a microscope with coupled computer imaging software to generate a characteristic curve of film thickness to spin speed, achieving a minimum film thickness …

Processing Pdms Gecko Tape Using Isopore Filters And Silicon Wafer Templates, Boris Luu

Materials Engineering

Gecko tape was processed through nanomolding involving two types of templates. One template was a Millapore Isopore polycarbonate membrane filter and the other template was an n-type silicon wafer processed to include four different pore diameters. These pore diameters were 20, 40, 80, and 160 microns. AutoCAD was used to design to a mask to be used later during photolithography. Two n-type wafers were sputtered with aluminum, underwent photolithography, and then etched using reactive ion etching. A template was placed into a Petri dish and Sylgard 184 polydimethylsiloxane (PDMS) was poured on the template. Once the PDMS cured, the 1 …

Characterisation, Modelling And Simulation Of Flexible Polyurethane Foam, Conor Briody, Barry Duignan, Stephen Jerrams

Conference Papers

Flexible polyurethane foam is an open-celled polymeric material that exhibits strain rate and temperature effects. It has found various applications in areas including the packaging, medical, sports, aerospace and aeronautical industries. Polyurethane foam is ubiquitous in seating applications and finds particular use in specialised wheelchair seating where customised seating solutions are required which can provide proper comfort and support without the risk of developing pressure ulcers. Proper seating design is critical for users if this problem is to be avoided, but a lack of quantitative knowledge of this material’s behaviour has limited its effectiveness. The objectives of the work presented …

Determining A Method For Rendering Low Cost Cdse(Zns) Core(Shell) Quantum Dots Aqueous Soluble Via Amphiphilic Polymer Wrapping, Patrick Mcbride

Materials Engineering

Herein is described the procedure of two amphiphilic polymer wrapping techniques that may be employed for obtaining aqueous soluble quantum dots (QDs) for use in biological fluorescent imaging applications. The advent of QDs has led to new nanoscale fluorescent materials that exhibit unparalleled quantum yields (QYs), high resistance to photobleaching, tunable emissions, and
absorption over a large optical range. However, the QD synthesis employed here at Cal Poly to obtain bright, photostable CdSe(ZnS) core(shell) QDs involves the use of organic solvents and surfactants, leading to hydrophobic QDs. Since all of biology relies on aqueous solubility, this hydrophobicity creates a major …

Migration Models - Comparison Of Pvc, Pet And Pla Diffusivity, Combined With A Production Cost Model For Westridge Laboratories, Shelley Cooke, Sarina Surrette

Materials Engineering

This project has two parts: [1] a migration and diffusivity model for candidate plastics used in containers, and [2] a product cost model for Westridge Laboratories (Santa Ana, CA).

Diffusion modeling is a useful tool to predict migration of polymer constituents into exposed liquids. Polyvinyl chloride (PVC), polyethylene terephthalate (PET) and polylactic acid (PLA) were studied to estimate production costs, and component migration into water-based liquids from plastic containers. Bis (2-ethylhexyl) phthalate (DEHP), antimony trioxide, and stannous octoate, are components of concern in the three candidate polymers, respectively. Normal detection limits for these constituents are about 1 - 10 ppb, …

Pigments For Improving Plant Health In Organic Systems, Gregory Keith Bartley Jr.

Gregory Keith Bartley Jr.

Photosynthesis, arguably the most important biological process on earth, solely relies on the ability of pigments to capture, utilize, and convert the sun‟s energy to form life. The adequate conversion of light into harvestable food, fuel, and fiber regulates rates of population and economic growth. In order to meet the expanding needs of humanity with the earth‟s potential for agricultural production, new sustainable techniques for increased photosynthetic efficiency in plants must be implemented. The earth's pattern of light exposure is extremely dynamic, exhibiting constant changes in quantity and quality throughout time and space. For photosynthetic organisms, this meant evolving various …

Literature Review - Pigments In Plant Health, Gregory Keith Bartley Jr.

Gregory Keith Bartley Jr.

The solar radiation received at the Earth’s surface helps power the photochemical processes in photosynthesis. However, under sunlight, photosynthetic organisms are unavoidably exposed to potentially harmful levels of ultraviolet and visible light radiation. Consequently, plants have developed many mechanisms for the avoidance and dissipation of excess light energy. The growth of crops under increased solar irradiance during sub- and supra-optimal temperature conditions is an obstacle for increasing seasonal crop production in the transition zone. New methods for reducing the photoinhibitory effects of solar irradiation have been observed in the field of turfgrass. Through the application of pigment compounds to the …

A Least Squares Closure Approximation For Liquid Crystalline Polymers, Traci Ann Sievenpiper

Mathematics & Statistics Theses & Dissertations

An introduction to existing closure schemes for the Doi-Hess kinetic theory of liquid crystalline polymers is provided. A new closure scheme is devised based on a least squares fit of a linear combination of the Doi, Tsuji-Rey, Hinch-Leal I, and Hinch-Leal II closure schemes. The orientation tensor and rate-of-strain tensor are fit separately using data generated from the kinetic solution of the Smoluchowski equation. The known behavior of the kinetic solution and existing closure schemes at equilibrium is compared with that of the new closure scheme. The performance of the proposed closure scheme in simple shear flow for a variety …

An Analytical Model Of Nanometer Scale Viscoelastic Properties Of Polymer Surfaces Measured Using An Atomic Force Microscope, Jacob B. Goldberg

Theses and Dissertations

The United States Air Force and the Department of Defense is increasingly interested in nanomaterials. To study these materials, one needs to measure the mechanics of materials on the nanoscale. Over the past few decades the atomic force microscope (AFM) has been used in various methods to establish local surface properties at the nanoscale. In particular, surface elasticity measurements are crucial to understanding nanoscale surface properties. Problems arise, however, when measuring soft surfaces such as polymers and biological specimens, because these materials have a more complex viscoelastic response. This research focuses on modeling an AFM dynamic nanoindentation experiment intended to …

Rheological Characteristics Of Solvent Free Nanofluids: Thermal Transitions And Reactive Curing, Daniel Chojnowski

Master's Theses and Doctoral Dissertations

Solvent-free nanofluids are a new and exciting class of material that evolved to address the limitations of their predecessors, nanocomposites. One of the most exciting aspects of solvent-free nanofluids is the wide range of tools chemists have to build and study them. Understanding how the structure manipulations impact the rheology of the resulting solvent-free nanofluids is essential if solvent-free nanofluids are truly the technology of the future. This work documents the basic rheological parameters, thermal transitions, and curing kinetics of various solvent-free nanofluids synthesized by Zhiming Qiu and Kejian Bian at the Coating Research Institute at Eastern Michigan University.

Creep In Photovoltaic Modules: Examining The Stability Of Polymeric Materials And Components, David C. Miller, Michael D. Kempe, Stephen H. Glick, Sarah R. Kurtz

Publications (E)

Interest in renewable energy has motivated the implementation of new polymeric materials in photovoltaic modules. Some of these are non-cross-linked thermoplastics, in which there is a potential for new behaviors to occur, including phase transformation and visco-elastic flow. Differential scanning calorimetry and rheometry data were obtained and then combined with existing site-specific time-temperature information in a theoretical analysis to estimate the displacement expected to occur during module service life. The analysis identified that, depending on the installation location, module configuration and/or mounting configuration, some of the thermoplastics are expected to undergo unacceptable physical displacement. While the examples here focus on …

Fabrication And Characterization Of Graphene Hydrogel Via Hydrothermal Approach As A Scaffold For Preliminary Study Of Cell Growth, Huang Nay Ming

Huang Nay Ming

Three-dimensional assembly of graphene hydrogel is rapidly attracting the interest of researchers because of its wide range of applications in energy storage, electronics, electrochemistry, and waste water treatment. Information on the use of graphene hydrogel for biological purposes is lacking, so we conducted a preliminary study to determine the suitability of graphene hydrogel as a substrate for cell growth, which could potentially be used as building blocks for biomolecules and tissue engineering applications. A three-dimensional structure of graphene hydrogel was prepared via a simple hydrothermal method using two-dimensional large-area graphene oxide nanosheets as a precursor. The concentration and lateral size …