Engineering Commons^™

Numerical Calculation Of The Flame Spreading Over A Methane Hydrate Surface, Otabek Nigmatov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The Methane Hydrate is expected as an energy source and is being as a medium distance transport means of natural gas alternative of LNG (Liquefied Natural Gas). During the natural gas transportation, fire accidents are concerned. In the present study, the flame spreading over a methane hydrate surface has been studied numerically as a function of hydrate surface temperature, T_s. When T_s = 173 K (-100℃), lower than the dissociation temperature (T_d = 183 K (-90℃)), the flame spreading speed is around 6.5 mm/s, while the flame spreading speed at T_s = 193 K (-80℃), …

Dft Study Of Quantum Chemical Parameters Of 4-Amino-2-Mercaptobenzimidazole And Their Tautomeric Forms, Dilnoza Rahmonova, Alisher Eshimbetov, Lobar Gapurova, Zuhra Ch. Kadirova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

Coordination competing donor centers, electronic and geometric structures of the 4-amino-2-mercaptobenzimidazole ligand molecule were studied using quantum chemical calculation by the DFT / 6-31G method (d, p). It was shown that during the formation of the metal complex, the ligand is coordinated through the localized nitrogen atom of the imidazole ring. In this study, the total energies (Etot) of 4-amino-2-mercaptobenzimidazole (1) and its tautomeric forms (2 and 3) were calculated. And also, the energies of boundary molecular orbitals, the energy gap between boundary MOs (ΔE) and the distribution of the total charge on atoms and boundary orbitals were determined. In …

The Effect Of Hydrogen Peroxide And Potassium Amylxanthate On The Surface Properties Of Chalcocite And Enargite, Berdakh T. Daniyarov, Hajime Miki, Daminbek A. Ziyatov, Shahlo Daminova

CHEMISTRY AND CHEMICAL ENGINEERING

The effect on the surface properties and floatability of chalcocite and enargite after oxidative treatment with hydrogen peroxide (H₂O₂) in the presence and absence of potassium amylxanthate (PAX) as a collector was studied. In this research, flotation tests were carried out on mixed and individual minerals. Oxidative treatment with hydrogen peroxide had a negative effect on the floatability of chalcocite and enargite. PAX adsorption analysis shows that enargite adsorbs PAX faster than chalcocite. Moreover, Fourier transform infrared spectroscopy analysis shows that PAX was adsorbed in the form of copper amylxanthate on chalcocite and enargite surfaces. In …

Influence Of The Amount Of Monoethanolamine On The Physicochemical Properties Of Aminolysis Products, Soxibjon A. Egamberdiyev, Muzaffar G. Alimukhamedov, Juraev Asror, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this paper is to investigate the process of aminolysis of secondary polyethylene terephthalate with monoethanolamine at low ratio. The effect of the amount of monoethanolamine on the physical and chemical properties of the aminolysis product of secondary polyethylene terephthalate was studied. With an increase of 1-4 moles of monoethanolamine obtained for synthesis (without the presence of a catalyst), it was observed that the number of amines in the aminolysis product increased from 324 to 503 mgKON/g, and the number of hydroxyls increased from 298 to 491 mgKON/g. The structure of the resulting bis(2-hydroxyethylene)terephthalamide was studied using IR …

Surface Treatments' Effects On The Capacitor's Dielectric Performance Under Electro-Thermal Stresses, Haider. M. Umran, Feipeng Wang

Karbala International Journal of Modern Science

Biaxial-oriented polypropylene (BOPP) films are characterized by unfavorable aging behavior because of their poor susceptibility to high temperatures, humidity, and high electric fields. This makes them unqualified to withstand harsh operating conditions, such as in capacitor applications. This study investigates the impact of annealing BOPP samples at 100 °C for five hours after fluorination at different times (15, 30, and 60 minutes) on their electrical and mechanical performance under electro-thermal stresses. Scanning electron microscope (SEM) images confirm that there is an increase in surface roughness and the formation of a dense layer of fluorine-containing groups monotonically with fluorination time. So, …

Measurement Of Thermal Conductivity Of Epoxy Resin Reinforced With Different Weight Ratios Of Glass And Carbon Powders, Edrees Edaan Ghadeer

Al-Bahir Journal for Engineering and Pure Sciences

The effect of thermal conductivity was studied on the composites prepared before and after reinforcement with different weight fractions (10, 20, 30, 40, 50, 60 wt %), using a Disc Lee's device, and the dispersion of the filler was studied by morphological analysis of the complexes using scanning electron microscopy (SEM). The (SEM) of glass composite powders, showed a smooth surface with a chance of forming very few voids, clusters and blisters on the surface of the sample, which increased with the increase of the weight fractions of the filled powder. While the composites filled with carbon powders show smooth …

Enhancing Compatibility And Mechanical Properties Of Natural Rubber Composites, Krisma Yessi Sianturi, Adam Febriyanto Nugraha, Belle Kristaura, Mochamad Chalid

Journal of Materials Exploration and Findings

Pure natural rubber (NR) exhibits low mechanical properties, necessitating the incorporation of additives like vulcanizing agents and fillers. Carbon black and silica, conventional fillers, are relatively expensive and not environmentally friendly. This study explores using Oil Palm Empty Fruit Bunch (OPEFB) fiber as an affordable, abundant, and biodegradable alternative filler for NR. However, compatibility issues arise between the nonpolar NR and the polar OPEFB fiber. A latex-starch hybrid coupling agent (CA (NR-St)) was added to the composite formulation to address this. NR, OPEFB fiber, and the coupling agent were mixed using an open roll mill with a 10 phr OPEFB …

Utilization Of Cellulose Symbiotic Culture Of Bacteria And Yeast (Scoby) With Sweet Tea Media As Methylene Blue And Brilliant Green Biosorbent Material, Leonard Mateus Sigiro, Ahmad Maksum, Donanta Dhaneswara

Journal of Materials Exploration and Findings

The cellulose from Symbiotic Culture of Bacteria and Yeast (SCOBY) can be used as a biosorbent for dye adsorption, such as Methylene Blue and Brilliant Green. This study used sweet tea with a 6% of sugar concentration and 14 days of fermentation time to synthesize biosorbent material from SCOBY. The results from this synthesis are then characterized using FTIR, SEM, and BET. From the result of characterization, it was found that SCOBY has pores formed from cellulose. The results of the average pore size are 1.5976nm with a pore volume of 0.229cc/g, while the specific surface area is 143.244m2/g. The …

Sustainable Material For Urea Delivery Based On Chitosan Cross-Linked By Glutaraldehyde Saturated Toluene: Characterization And Determination Of The Release Rate Mathematical Model, Jayanudin Jayanudin, Retno S. D. Lestari, Indar Kustiningsih, Dandi Irawanto, Rozak Rozak, Reyonaldo L. A. Wardana, Fakhri Muhammad

Karbala International Journal of Modern Science

The aims of this study were to characterize the urea-loaded chitosan microspheres and determine the release kinetic constants and diffusion coefficients. An emulsion cross-linking method was used to prepare the urea-loaded chitosan microspheres. Urea was dissolved in a solution of chitosan then put into vegetable oil and stirred to form an emulsion. Glutaraldehyde saturated toluene (GST) was added into the emulsion dropwise while continuously stirring for the solidification process. Chitosan microspheres filled with urea were washed, dried, and then analyzed. Characterization of the urea-loaded chitosan microspheres was conducted using a scanning electron microscope (SEM), Raman spectroscopy, X-ray diffraction, and particle …

Investigating Features And Output Correlation Coefficient Of Natural Fiber-Reinforced Poly(Lactic Acid) Biocomposites, Andreas Federico, Siti Norasmah Surip, Wan Nor Raihan Wan Jaafar, Jaka Fajar Fatriansyah, Agrin Febrian Pradana

Journal of Materials Exploration and Findings

Polylactic acid (PLA) material has the potential to be applied in various industrial fields, but this material has shortcomings in terms of mechanical properties, especially mechanical strength, due to brittleness nature of PLA. The manufacture of PLA composite material with the addition of natural fibers as a reinforcing phase is one of the methods to increase the impact strength and maintain the biodegradable properties of the material. However, in theory, there are many factors that affect the mechanical properties of composite materials, thus making the mechanical properties of composites more complex than monolithic materials. The mechanical properties of these composite …

Obtaining Wrapping Paper Used In Furniture Wrapping And Quality Delivery And Determining Its Quality Indicators, E A. Egamberdiyev, A R. Makhkamov, G R. Rakhmonberdiev

Technical science and innovation

Composite materials samples have been obtained from cellulose and bazalt fibers based on cellulose-containing plants. The properties of paper samples have been studied: the amound of cellulose, the amound of ash, water absorption and breaking load. Gained results show that the composite material with the addition of basalt fibers is more durable. Half-finished cellulose fibers obtained from basalt, straw and wastepaper are more prouse than ones obtained from cotton plant

Synthesis Of Aromatic Acetylene Alcohols Based On Benzaldehyde And Its Halogenated Products, Sanat Samatov, Abduvakhab Ikramov, Saida Abdurakhmanova, Odiljon Ziyadullayev, Guzal Otamukhamedova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this study is to synthesize the corresponding aromatic acetylenic alcohols by alkylation with phenylacetylene in a complex catalytic system based on Zn(OTf)₂ and TBAF·3H₂O for the first time with benzaldehyde and some of its halogen derivatives. The selectivity and stability of catalysts used for the yields of reactions for the synthesis of aromatic acetylene alcohols were analyzed. The effect of benzaldehyde and its halogenated derivatives on the product yield was analyzed. The nature, structure, isomerism, spatial structure and other properties influenced to this reactions were studied. Some features of reactions of synthesis of aromatic …

Study Of Sorption Of Some Metal Ions By The Obtained Phosphoric Acid Cation Exchanger Of Polycondensation Type, Malika Berdieva, Rano Nazirova, Alisher Yuldashev, Umida Sharipova, Dilmurod Azimov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this work is to investigate the sorption of Cu²⁺, Co²⁺, Ni²⁺, UO₂²⁺ ions, etc. depending on the ionic form of the cationite and the pH of the medium on phosphoric acid cationite obtained by forsforylation of a polymer based on cubic waste of the Shurtan gas-chemical complex and a secondary product of the hydrolysis industry – furfural. It was found that copper and UO₂²⁺ ions are best sorbed by cationite when the cationite is in Na form. The UO₂²⁺ ion is sorbed fairly well in …

Thermal Properties Of Polyelectrolyte Complexes Of Bombyx Mori Chitosan With Collagen, Shuhrat Khudoyberdiev, Noira Vokhidova, Mukhitdin Abdurazakov, Sayora Rashidova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the work was to study the thermal behavior of the polyelectrolyte complexes of Bombyx mori ChS with collagen. As a result of the studies, the thermal properties of polyelectrolyte complexes based on Bombyx mori chitosan with collagen in wt. rel. 1:0,1 and 1:0,2 respectively. It has been determined that the most significant weight changes for chitosan with a molecular weight of 15×10³ and the degree of deacetylation of 85% occur at a temperature is 270 °C, when the mass loss rate reaches its maximum value. For collagen, the same temperature is 277 °C. For complexes ChS/collagen …

Prospects For Using Metal-Polymer Composite Structures In The Gear Manufacturing, Umid Mamasobirov, Shoraxmat Shoobidov, A F. Husanboyev

Technical science and innovation

In this paper, some thermoplastic polymer composites and filler composites for the production of metal-polymer gear transmissions are presented. Efforts have been made to expand the raw material base and identify ways to increase the durability of gears through technological and design measures.

Study Of Various Quality Characteristics Of Polyester Fibers Obtained On The Basis Of Primary And Secondary Polyethylene Terephthalate, Samida Ernzarova, Asror Juraev, Muzaffar Alimukhamedov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of study is comprehensive determination of various quality characteristics of polyester fibers obtained on the basis of primary and secondary polyethylene terephthalate. The analysis of the raw material base of pre-oriented yarns (POY) threads has been carried out. The technological, physicomechanical properties, as well as the structure of the primary and secondary polyethylene terephthalate used in the production of the threads have been studied. The structure and properties of polyethylene terephthalate changed: the properties were worse, the structure were amorphous, the molecular weight decreased. The structure of recycled polyethylene terephthalate changed as a result of technological conversions in …

Мulti-Layer Fibrous Material Based On Textile Waste, Sevara Alimkhanova, Nodir Mirzaev, Adham Rafikov

CHEMISTRY AND CHEMICAL ENGINEERING

At the textile and sewing and knitting enterprises of the Republic of Uzbekistan, the number of which increases every year, a sufficient amount of technological waste is accumulated, which formed in the processes of sizing yarn, starting and setting up equipment, designing and sewing products. Meanwhile, there is a shortage of warm, comfortable, light, soft lining materials for clothes and shoes based on natural raw materials. With the purpose of rational use of textile waste - shredded, disheveled scraps of fabric and knitwear, a multilayer nonwoven material for details of clothing and footwear has been obtained. The material formed by …

Spectral Features And Hydrogen Bond Structure Of Aqueous Solutions Of Ethanol, Dilbar Bozorova, Shukur Gofurov, Mavlonbek Ziyayev, Abdulmutallib Kokhkharov, Oksana Ismailova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is develop an approach that makes it possible to study the spectral properties and structure of intermolecular hydrogen bonds in aqueous solutions of ethanol formed in systems whose existence in a gaseous medium or an isolated state is practically impossible. This approach bases on the combined use of infrared spectroscopy and molecular dynamics (MD) methods. An analysis give the structural reorganization of water molecules depending on the concentration of ethanol alcohol. It has been shown that the method of molecular dynamics with classical force fields makes it possible to explicitly take into account the molecules …

Determination Of The Stability Of Complex Compounds Of Copper (Ii), Zinc (Ii), Cadmium (Ii) And Silver (I) With Covalently Immobilized Sulfur Contain Ligands, Sherzod Kasimov, Khayit Turaev, Abdulakhat Jalilov, Farkhod Narmuratov, Zulkhumor Jumayeva

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is to determine the stability of the obtained coordination compounds of some d-metals with covalent immobilized sulfur-containing ligands. To achieve this goal, coordination compounds of copper (II), zinc (II), cadmium (II) and silver (I) ions with covalent immobilized sulfur-containing ligands - О,О-di- (2-aminoethyl) -dithiophosphate potassium - polyester matrix (KD2AEDTP-PEM), O,O-di- (2-aminoethyl) -dithiophosphate potassium - carbamide-formaldehyde matrix (KD2AEDTP-KFM). Studies were carried out to determine the acid-base properties of covalent-immobilized sulfur-containing ligands - KD2AEDTP-PEM, KD2AEDTP-KFM and the concentration stability of the obtained coordination compounds with ions of copper (II), zinc (II), cadmium (II), and silver (I). Based …

Synthesis And Spectroscopic Study Of Complex Compounds Mn(Ii), Co(Ii), Cu(Ii) And Zn With 5-Amino-2-Mercaptobenzimidazole, Lobar Gapurova, Dilnoza Rakhmonova, Shakhnoza Kadirova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to study the effect of the nature of electron-donor and electron-withdrawing substituents in the molecules of heterocyclic ligands, the nature of acidoligands and transition metal ions on the properties of the synthesized coordination compounds. A method for the synthesis of new complex compounds of Mn (II), Cо (II), Cu (II) and Zn with 5-amino-2-mercaptobenzimidazole has been developed and the composition and structure of the synthesized complex compounds have been studied using modern physicochemical methods, such as elemental, thermogravimetric, X-ray phase analysis and IR spectroscopy. Coordination competing donor centers, electronic and geometric structures of the …

Influence Of Pinholes On Water Vapor And Oxygen Permeation Of Packaging Foil And Films, Petri Johansson, Johanna Lahti, Jurkka Kuusipalo

Journal of Applied Packaging Research

Controlling of moisture and oxygen permeation through the packaging material is essential in most packaging applications. With multilayer structures of different barrier materials, there is possibility to create desired barrier properties to the package. The challenge is to plan appropriate barrier level, e.g. WVTR and OTR, theoretically to the package before producing the package. Furthermore, in specific packages there is a need to control the permeation e.g. respiration in vegetable packages. Typically foils and polymer films have high barrier properties, therefore, permeation can be controlled by producing artificial pinholes in these kinds of packages.

Influence of artificial pinholes in aluminium …

Optimization In The Application Of Varnishes Barrier On Cartonboard Packaging, Andre Ramalheiro De Andrade, Maria Isabel Rodrigues Phd, Eduardo Luiz Machado Phd

Journal of Applied Packaging Research

In this work adjustments in the rotogravure printing process are proposed to the varnish water vapor transmission rate (WVTR) aiming to obtain results smaller than 20g/m²/24h. One case study was used for the propositions for improvements, where focused on varnish application process in a gravure printer for an eight-printing unit cartonboard packaging, maximum printing speed of 175 m/min and a 285 g/m² weight cartonboard. The possible variables that influenced the WVTR result were selected from the technical expertise of the people involved in the project, the analysis in the printing process with the application of directed trials using experimental designs …

Development Of The Composition Of A Composite Material Based On Thermoreactive Binder Ed-20, Umida Ziyamukhamedova, Gavhar Miradullayeva, Erkin Rakhmatov, Jasur Nafasov, Mavtuna Inogamova

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the study is to determine the effect of the type of structural modifier and filler on the structure formation and technological properties of potting composite polymeric materials (HCPM) and protective coatings for sheet and complex-configuration technological equipment, taking into account their rheological properties. Compositions of composite polymer materials based on a thermosetting binder of epoxy-diane resin ED-20 filled with a mineral filler - kaolin modified with gassipol resin (GS) - were developed using Newton's interpolation formula and the Lagrange method. The optimal amount of gossypol resin determined in the composition of the composite – in the amount …

Effect Of Talc On The Properties Of A Compound Based On Ethylene-Propylene Copolymer, Ikromjon Usmanov, Farrukh Kurbanbekov, Bobir Aykhodjaev, Ravshan Adilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of the research is to study the possibility of replacing Korean-made talc with inexpensive talc from an Afghan deposit, processed in Uzbekistan and used for the production of polypropylene compounds. In the future, these compounds are used for the manufacture of plastic car parts. A block copolymer produced by Uz Kor Gaz Chemical was chosen as a binder. For this, the influence of the content and type of talc on the properties of a compound based on an ethylene-propylene copolymer was studied.

The properties of the obtained compounds checked using ISO standards. The fractional composition of the studied …

Poly(2-Hydroxyethyl Methacrylate) Hydrogels For Contact Lens Applications–A Review, Kushendarsyah Saptaji, Nurlaely Rohmatul Iza, Sinta Widianingrum, Vania Katherine Mulia, Iwan Setiawan

Makara Journal of Science

The emerging technology in biomedical engineering requires biocompatible materials, which are also referred to as biomaterials. For a material to be considered biocompatible, it should not interact with human tissues in a harmful way, and vice versa. Various properties of biocompatible materials, such as mechanical and optical properties, have to be considered for different biomedical applications. One of the most popular applications of biomaterials is for contact lenses. Hydrogels, specifically poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels, are among the most popular ones in ophthalmologic applications, especially in soft contact lenses. This paper reviews the use of PHEMA hydrogels as one of the …

Evaluation Of Stretch Film Behavior During Long-Term Storage Under Different Atmospheric Conditions, Kyle Dunno, Maria Symanski

Journal of Applied Packaging Research

This study examined the post-application behavior of two 20.3 micron machine stretch films, one categorized as high-performance and one as general-performance, for thirty days while stored at either 23°C or 38°C. For each film type, the stretch film was applied to a simulated unit load to produce neutral and positive applied total stretch scenarios. The relaxation curves developed from each test indicate the relaxation rate of the films varied based on the storage condition. Observed was an average of 41% containment loss for both high-performance and general-purpose films when the simulated loads were stored at 38°C. For simulated loads stored …

Composition For Protecting Technological Equipment Against Salt Deposits And Internal Corrosion, Hasan Kadirov, Sadritdin Turabdjanov

CHEMISTRY AND CHEMICAL ENGINEERING

Aimed studies on the synthesis of metal complexonates have carried out. The reaction of obtaining zincate zincate oxyethylene diphosphonic acid OEDP has studied. On the basis of synthesized zincate-OEDP, compositions of corrosion inhibitors and deposits of mineral salts with the addition of a vacuum residue of monoethanolamine (RMEA) and polyaminocrotanol (PKI-3), which are able to effectively suppress corrosion processes in environments with different initial corrosive activity, have been compiled. It is proved that the high efficiency of the composition OEDP : zincate-OEDP : PKI-3 (maximum protective effect - 97.9%) is much more effective than the composition OEDP : zincate-OEDP : …

Rational Disposal Of Pet Containing Waste And Prospects For The Synthesis Of New Polymers, Asror Juraev, Muzaffar Alimukhamedov, Ravshan Adilov, Farhod Magrupov

CHEMISTRY AND CHEMICAL ENGINEERING

As a result of the research on the utilization of polyethylene terephthalate-containing household waste, a promising direction was identified in the production of a new type of secondary polyethylene terephthalate (SPET) - unsaturated polyesters.It was revealed that the final product, which formed when the alcoholization process is complete in any proportion of of glycol and secondary polyethylene terephthalate, is the bisalkylent terephthalate of terephthalic acid; the content of the alcoholysis product consists of bisalkylent terephthalate, different molecule mass, functionally hydroxyl-containing complex polyester polyol and free diols.

The laws of alcoholization of secondary …

Synthesis Of Superabsorbing Hydrogels Based On Starch Copolymers, Baxodir Kholnazarov, Khayit Turaev, Abdulakhat Jalilov

CHEMISTRY AND CHEMICAL ENGINEERING

The aim of this work is to synthesize highly swellable superabsorbent hydrogels based on starch copolymers. To achieve this goal, mineral-containing superabsorbent hydrogels based on starch, acrylamide, binder and initiator were synthesized. The optimal synthesis conditions were determined and studies were carried out on the influence of the molar ratios of the starting substances on the composition and physicochemical properties of the synthesized superabsorbent hydrogel. In the course of research, the optimum copolymerization temperature was 60 ° C, and the reaction time was 3 hours.

As a result of the study, a superabsorbent hydrogel based on starch, acrylamide and bentonite …

Synthesis Of Thiocol Oligomer Based On Sodium Tetrasulphide, Epichlorhydrine And Ammonium Phosphate, Bakhtiyor Normurodov, Khayit Turaev, Abdulakhat Jalilov, Sherzod Kasimov

CHEMISTRY AND CHEMICAL ENGINEERING

The purpose of this study is the synthesis and study of thiokol oligomer NEP-12 brand based on sodium tetrasulfide, epichlorohydrin and ammonium phosphate, which is intended for use as a main component of Thiokol sealant. To achieve this goal, a thiokol oligomer based on sodium tetrasulfide, epichlorohydrin, and ammonium phosphate was synthesized and investigated, and the optimal conditions for the synthesis of a thiokol oligomer were determined. Research has been carried out on the influence of the molar ratios of the starting substances on the composition and physicochemical properties of the synthesized thiocol oligomer. The optimum polycondensation temperature was taken …