Engineering Commons^™

Architectural Optimization Of Digital Libraries, Aileen O. Biser

Computer Science Theses & Dissertations

This work investigates performance and scaling issues relevant to large scale distributed digital libraries. Presently, performance and scaling studies focus on specific implementations of production or prototype digital libraries. Although useful information is gained to aid these designers and other researchers with insights to performance and scaling issues, the broader issues relevant to very large scale distributed libraries are not addressed. Specifically, no current studies look at the extreme or worst case possibilities in digital library implementations. A survey of digital library research issues is presented. Scaling and performance issues are mentioned frequently in the digital library literature but are …

The Cluster Multipole Algorithm For Far-Field Computations, Rakesh R. Patel

Electrical & Computer Engineering Theses & Dissertations

Computer simulations of N-body systems are beneficial to study the overall behavior of a number of physical systems in fields such as astrophysics, molecular dynamics, and computational fluid dynamics. A new approach for computer simulations of N-body systems is proposed in this research. The new algorithm is called the Cluster Multipole Algorithm (CMA). The goals of the new algorithm are to improve the applicability to non-point sources and to provide more control on the accuracy over current algorithms. The algorithm is targeted to applications that do not require rebuilding the data structure about the system every time step due to …

Multiple Streams Synchronization In Collaborative Multimedia Systems, Emilia Stoica

Computer Science Theses & Dissertations

With the recent increase of the communication bandwidth and processor power, new types of applications have emerged. Among them, there are multimedia application, in which users are able to control, combine, and manipulate different types of media, such as text, sound, video, computer graphics, and animation. A key requirement in any multimedia application is to synchronize the delivery of various media streams to the user. To achieve this, the sender has to provide the temporal relations between the streams as they are captured. Since the receiver uses this information in streams presentation, its accuracy is very important.

Our main contribution …

Vortex Wake And Exhaust Plume Interaction, Including Ground Effect, Ihab Gaber Adam

Mechanical & Aerospace Engineering Theses & Dissertations

Computational modeling and studies of the near-field wake-vortex turbulent flows, far-field turbulent wake-vortex/exhaust-plume interaction for subsonic and High Speed Civil Transport (HSCT) airplane, and wake-vortex/exhaust-plume interaction with the ground are carried out. The three-dimensional, compressible Reynolds-Averaged Navier-Stokes (RANS) equations are solved using the implicit, upwind, Roe-flux-differencing, finite-volume scheme. The turbulence models of Baldwin and Lomax, one-equation model of Spalart and Allmaras and two-equation shear stress transport model of Menter are implemented with the RANS solver for turbulent-flow modeling.

For the near-field study, computations are carried out on a fine grid for a rectangular wing with a NACA-0012 airfoil section and …

The Solution Of Hypersingular Integral Equations With Applications In Acoustics And Fracture Mechanics, Richard S. St. John

Mathematics & Statistics Theses & Dissertations

The numerical solution of two classes of hypersingular integral equations is addressed. Both classes are integral equations of the first kind, and are hypersingular due to a kernel containing a Hadamard singularity. The convergence of a Galerkin method and a collocation method is discussed and computationally efficient algorithms are developed for each class of hypersingular integral equation.

Interest in these classes of hypersingular integral equations is due to their occurrence in many physical applications. In particular, investigations into the scattering of acoustic waves by moving objects and the study of dynamic Griffith crack problems has necessitated a computationally efficient technique …

Sparse Equation-Eigen Solvers For Symmetric/Unsymmetric Positive-Negative-Indefinite Matrices With Finite Element And Linear Programming Applications, Hakakizumwami Birali Runesha

Civil & Environmental Engineering Theses & Dissertations

Vectorized sparse solvers for direct solutions of positive-negative-indefinite symmetric systems of linear equations and eigen-equations are developed. Sparse storage schemes, re-ordering, symbolic factorization and numerical factorization algorithms are discussed. Loop unrolling techniques are also incorporated in the coding to enhance the vector speed. In the indefinite solver, which employs various pivoting strategies, a simple rotation matrix is introduced to simplify the computer implementation. Efficient usage of the incore memory is accomplished by the proposed "restart memory management" schemes. A sparse version of the Interior Point Method, IPM, has also been implemented that incorporates the developed indefinite sparse solver for linear …

Inversion And Analysis Of Remotely Sensed Atmospheric Water Vapor Measurements At 940nm, Jack Cutler Larsen

Mechanical & Aerospace Engineering Theses & Dissertations

The understanding and acceptance of remotely sensed atmospheric data depends strongly on the steps taken to characterize experiment error and validate observations through comparisons to other independent measurements. A formal error analysis of the Stratospheric Aerosol and Gas Experiment II (SAGE II) water vapor operational inversion algorithm is performed and compared to previous results. Random measurement errors were characterized by segmented least-squares profile fitting of the slant path absorption which found the error to be uncorrelated in the stratosphere with estimated variances significantly smaller than expected from 18-30 km. Estimates of null space error were developed from radiosonde hygrometers in …

Study Of Human Factors Variables In Battle Outcome Prediction Models, David Andrew Glovier

Engineering Management & Systems Engineering Theses & Dissertations

Over time there have been many improvements in models that are used to predict the outcome of battles. Currently there is much supposition and speculation surrounding the use of human performance related factors as additional inputs to battle simulation models to improve their accuracy. However there is no conclusive scientific evidence which shows that these factors do make a significant difference. This study investigates the use of factors that may impact on the human performance directly or indirectly in battle prediction models. These factors consist of traditional human factors and external factors that may influence the human performance. The research …

Thermal Lattice Boltzmann Simulations Of Variable Prandtl Number Turbulent Flows, Min Soe, George Vahala, Pavol Pavlo, Linda L. Vahala, Hudong Chen

Electrical & Computer Engineering Faculty Publications

Thermal lattice Boltzmann (TLBE) models that utilize the single relaxation time scalar Bhatnagar, Gross, and Krook collision operator have an invariant Prandtl number. For flows with arbitrary Prandtl number, a matrix collision operator is introduced. The relaxation parameters are generalized so that the transport coefficients become density independent. TLBE simulations are presented for two-dimensional free decaying turbulence induced by a strongly perturbed double velocity shear layer for various Prandtl numbers.

Emission Of Excimer Radiation From Direct Current, High-Pressure Hollow Cathode Discharge, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

A novel, nonequilibrium, high-pressure, direct current discharge, the microhollow cathode discharge, has been found to be an intense source of xenon and argon excimer radiation peaking at wavelengths of 170 and 130 nm, respectively. In argon discharges with a 100 μm diam hollow cathode, the intensity of the excimer radiation increased by a factor of 5 over the pressure range from 100 to 800 mbar. In xenon discharges, the intensity at 170 nm increased by two orders of magnitude when the pressure was raised from 250 mbar to 1 bar. Sustaining voltages were 200 V for argon and 400 V …

Evaluation Of Toxicity, Bioavailability And Speciation Of Lead, Zinc And Cadmium In Mine/Mill Wastewaters, Mujde Erten-Unal, Bobby G. Wixson, Nord Gale, Jerry L. Pitt

Civil & Environmental Engineering Faculty Publications

The toxicity of common compounds of lead, cadmium and zinc was evaluated in waters similar to that found in the world's largest lead producing area in Missouri. Static, acute toxicity tests were performed using fathead minnows (Pimephales promelas) and water fleas (Daphnia magna) respectively. Test organisms were subjected to varying amounts of sulfide, carbonate, chloride and sulfate salts of lead, zinc and cadmium mixed in hard, alkaline waters typical to this region. Median lethal concentrations were calculated using nominal versus measured metal concentrations. Measured metal concentrations included four different metal fractionation (extraction/filtration) techniques at different pH …

Buckets: Aggregative, Intelligent Agents For Publishing, Michael L. Nelson, Kurt Maly, Stewart N. T. Shen, Mohammad Zubair

Computer Science Faculty Publications

Buckets are an aggregative, intelligent construct for publishing in digital libraries. The goal of research projects is to produce information. This information is often instantiated in several forms, differentiated by semantic types (report, software, video, datasets, etc.). A given semantic type can be further differentiated by syntactic representations as well (PostScript version, PDF version, Word version, etc.). Although the information was created together and subtle relationships can exist between them, different semantic instantiations are generally segregated along currently obsolete media boundaries. Reports are placed in report archives, software might go into a software archive, but most of the data and …

Creating A Canonical Scientific And Technical Information Classification System For Ncstrl+, Melissa E. Tiffany, Michael L. Nelson

Computer Science Faculty Publications

The purpose of this paper is to describe the new subject classification system for the NCSTRL+ project. NCSTRL+ is a canonical digital library (DL) based on the Networked Computer Science Technical Report Library (NCSTRL). The current NCSTRL+ classification system uses the NASA Scientific and Technical (STI) subject classifications, which has a bias towards the aerospace, aeronautics, and engineering disciplines. Examination of other scientific and technical information classification systems showed similar discipline-centric weaknesses. Traditional, library-oriented classification systems represented all disciplines, but were too generalized to serve the needs of a scientific and technically oriented digital library. Lack of a suitable existing …

An Alternative Method For Determining Adjusted Function Points As The Basis For Software Cost Estimating, William Alexander Eldred

Engineering Management & Systems Engineering Theses & Dissertations

As software costs become an increasingly higher percentage of total computer system costs, it becomes increasingly more important for software development managers to have the ability to predict development costs with reasonable accuracy early in the software development cycle. Software development cost estimates are based in large measure on software size. Function points are considered by many to be a de facto industry standard as a size metric. The function points technique, unlike lines-of-code, can be applied early in the software development cycle and is language independent. Critics claim that the function point “value adjustment factor,” which purports to capture …

Surface Morphology Of Laser-Superheated Pb(111) And Pb(100), Z. H. Zhang, Bo Lin, X. L. Zeng, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The surface step density on the vicinal Pb(111) and the surface vacancy density on Pb(100) after laser superheating and melting are investigated using reflection high-energy electron diffraction. With ∼100-ps laser pulses, Pb(111) surface superheating does not significantly change the density of the steps and step-edge roughness. However, after laser surface melting, the average terrace width and the string length at the step edge become as large as those at room temperature. The average terrace width at 573 K changes from 38±15 to 64±19 Å after laser surface melting, while the average string length at the step edge changes from 90±14 …

Atomic Hydrogen Cleaning Of Inp(100) For Preparation Of A Negative Electron Affinity Photocathode, K. A. Elamrawi, M. A. Hafez, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

Atomic hydrogen cleaning is used to clean InP(100) negative electron affinity photocathodes. Reflection high-energy electron diffraction patterns of reconstructed, phosphorus-stabilized, InP(100) surfaces are obtained after cleaning at ∼400 °C. These surfaces produce high quantum efficiency photocathodes (∼8.5%), in response to 632.8 nm light. Without atomic hydrogen cleaning, activation of InP to negative electron affinity requires heating to ∼530 °C. At this high temperature, phosphorus evaporates preferentially and a rough surface is obtained. These surfaces produce low quantum efficiency photocathodes (∼0.1%). The use of reflection high-energy electron diffraction to measure the thickness of the deposited cesium layer during activation by correlating …

Femtosecond Photoemission Study Of Ultrafast Electron Dynamics In Single-Crystal Au(111) Films, J. Cao, Y. Gao, H. E. Elsayed-Ali, R. J. D. Miller, D. A. Mantell

Electrical & Computer Engineering Faculty Publications

The energy-dependent relaxation of photoexcited electrons has been measured by time-resolved two-photon photoemission spectroscopy on single-crystal Au(111) films with thickness ranging from 150 to 3000 Å. It is found that the energy-dependent relaxation does not show any significant thickness dependence, which indicates that electron transport is a much slower dynamical process in the near-surface region than expected from bulk properties. Furthermore, lifetimes of the photoexcited electrons can be fitted well by the Fermi-liquid theory with a scaling factor plus an effective upper lifetime. This observation enables separation of electron-electron scattering, and to a lesser extent electron-phonon scattering, processes from electron-transport …

Temperature Dependence Of Step Density On Vicinal Pb(111), Z. H. Zhang, H. E. Elsayed-Ali

Electrical & Computer Engineering Faculty Publications

The temperature dependence of step density on the vicinal Pb(111) surface is investigated using reflection high-energy electron diffraction. When the temperature is increased from 323 to 590 K. the average terrace width and the average string length at the step edge decrease from 85±25 to 37±16 Å and from 220±33 to 25±8 Å, respectively. Thermal step collapse on the Pb(111) surface near its bulk melting temperature is not observed. Above 530±7 K, the change in the string length at the step edge with temperature becomes small, and the intensity of the (00) beam is significantly decreased. We conclude that partial …

Generation Of Intense Excimer Radiation From High-Pressure Hollow Cathode Discharges, Ahmed El-Habachi, Karl H. Schoenbach

Bioelectrics Publications

By reducing the diameter of the cathode opening in a hollow cathode discharge geometry to values on the order of 100 μm, we were able to operate these discharges in noble gases in a direct current mode up to atmospheric pressure. High-pressure discharges in xenon were found to be strong sources of excimer radiation. Highest intensities at a wavelength of 172 nm were obtained at a pressure of 400 Torr. At this pressure, the vacuum ultraviolet (VUV) radiant power of a single discharge operating at a forward voltage of 220 V and currents exceeding 2 mA reaches values between 6% …