Engineering Commons^™

Artificial Neural Network-Based Modelling And Prediction Of Key Performance Indicators In Road Construction Projects, Hussein Mativila, John M. Kafuku, Beatus A. T. Kundi

Tanzania Journal of Engineering and Technology (TJET)

Road construction projects in developing countries including Tanzania experience several challenges including cost overruns, schedule delays and poor quality. The causes of these challenges include complex interdependencies project’s uncertainty factors. This makes traditional methods for predicting Key Performance Indicators (KPIs) less effective. This study has developed a robust Artificial Neural Network (ANN) model for accurate modelling and predicting KPIs for road construction projects in Tanzania. The analysis was based on data obtained from 281 projects implemented by TANROADS in 11 regions from 2015 to 2025. Fourteen uncertainty factors were measured on a five-point Likert scale and screened using Principal Component …

Urban Spatial Development Control In Tanzania: Analysis Of Factors Influencing Gis Application Using Structural Equation Modelling (Sem)., Happiness Protas Mmanda, Nestory Yamungu

Tanzania Journal of Engineering and Technology (TJET)

Rapid urbanization in developing countries has intensified urban expansion, creating challenges for sustainable development. Geographic Information Systems (GIS) enhance spatial planning, but empirical evidence on factors influencing their effectiveness remains limited. This study examines determinants of GIS application in Urban Spatial Development Control (USDC). The objectives are to (1) identify and categorize factors affecting GIS use, (2) assess relative strength, and (3) develop a validated structural model explaining GIS adoption in USDC. Data were collected from 103 LGAs by a mixed sampling method. Exploratory and Confirmatory Factor Analysis classified influencing factors into technology-related (α = 0.869, CR = 0.881), process-related …

Decision Support Tool For The Maintenance Of Meter Gauge Railway Permanent-Way Infrastructures: A Concept Paper, Hamisi J. Maulid, Beatus A.T Kundi, Juma M. Matindana, Ismail W. R. Taifa Dr

Tanzania Journal of Engineering and Technology (TJET)

A Decision Support Tool (DST) represents a transformative way of modernising maintenance practice on the permanent-way infrastructure of Meter Gauge Railway (MGR). Maintenance practice remains largely reactive, as the MGR plays a strategic role in transporting both freight and passengers, resulting in inefficient resource allocation, high operational risk, and growing Lifecycle expenses. This concept paper explores the potential and the design challenges for a DST that combines fuzzy analytic hierarchy process (Fuzzy-AHP) modelling, multi-criteria decision analysis (MCDA), Geographic Information Systems (GIS) and predictive machine learning (ML) analytics for evidence-based, future-oriented maintenance management. The paper draws on peer-reviewed studies from …

Robbed With Permission: Toward A Receiver-Consent Architecture For Trust-Preserving Mobile Money Transactions In Africa, Raphael Amponsah

African Conference on Information Systems and Technology

Mobile money transacted more than USD 2 trillion globally in 2025 across 2.3 billion registered accounts, with Sub-Saharan Africa holding over half of all accounts and two-thirds of transaction value. Between 58 and 72 percent of mobile money fraud on the continent exploits trust rather than technology, yet current security architecture authenticates the sender and merely notifies the receiver, leaving the transaction execution moment structurally unguarded. This paper introduces the Receiver-Consent Transaction Protocol (RCTP), a USSD-native protocol requiring the receiver's active PIN consent on their physical SIM before any credit completes, grounded in Design Science Research with Routine Activity Theory …

Leveraging Data Science And Analytics For Next-Generation Transportation And Logistics: Literature Review And Regional Analysis, Kazi Humayra Shams

Graduate Theses and Dissertations

The increasing integration of data science and analytics into next-generation transportation and logistics planning and operations offers improved system performance but requires managing and interpreting vast and complex datasets. The Arkansas Smart Transportation Research, Infrastructure and Data-Driven Engineering Systems (AR-STRIDES) program (NSF Award No. 2445877) is working to develop data science solutions and data-driven supply chain technologies for next-generation transportation and logistics systems. This thesis supports AR-STRIDES by providing a comprehensive literature review of recent literature studying data science and analytics in transportation and logistics systems and conducting a regional analysis of Arkansas to create a database of companies, higher …

Enhancing Community Engagement Through ‘Nitunze Kilombero’ Mobile App: Case Of Climate Land Use And Cover Management For Kilombero Basin, Ghanima Chanzi, Subira Munishi

Tanzania Journal of Engineering and Technology (TJET)

The Kilombero Basin in southeastern Tanzania faces significant challenges due to rapid land use and land cover (LULC) changes driven by climate change, population growth, and unsustainable farming practices. This study assessed the role of community engagement and digital reporting through the 'NITUNZE KILOMBERO', mobile application in supporting water resources management in the basin. The App facilitates real-time reporting of environmental issues, provides educational resources, and enables collaboration between local communities and authorities. A mixed-methods approach, including household surveys and key informant interviews, was employed to assess the app's effectiveness. Results indicate high community awareness of LULC impacts, with 85% …

Load Flow And Fault Performance Evaluation Of Interconnected Minigrids In Uganda Using Digsilent Powerfactory, Prossy Mutesi, Santos Kihwele, Emmanuel Matee

Tanzania Journal of Engineering and Technology (TJET)

The increasing demand for decentralized, reliable electricity in rural Sub-Saharan Africa has catalyzed the deployment of minigrids as an intermediate electrification strategy. This study investigates two solar photovoltaic (PV) mini-grids: Kyamugarura and Kanyegaramire, located in western Uganda, approximately 3km apart. Each mini grid initially consisted of 13 kW installed photovoltaic (PV) capacity, supplying power to households and small businesses. Due to rising demand and regular evening blackouts, both mini-grids are being upgraded to 57 kWp each. The integration of these upgraded systems into the national utility grid is proposed and simulated to evaluate performance improvements under two medium-voltage interconnection options: …

Material Costs, Karima Weinman

Masters Theses

This thesis investigates how migration fatality and disappearance data can be reinterpreted through material craft to create a more reflective encounter with information. Working with the Missing Migrants Project's dataset, this project asks how design can communicate dimensions of human loss that conventional data visualization cannot reach.

The work situates contemporary border violence within a longer colonial history, arguing that the logics of surveillance and quantification that structured European imperial expansion persist in the databases that govern mobility in the Mediterranean today.

Terrazzo is a 15th-century Venetian flooring technique built from discarded fragments bound together into a unified surface. This …

Risk Identification Of Green Hydrogen Supply Chain In Ammonia Industry In Indonesia Using Delphi And Topsis Methods, Ananda Priatama, Sheila Tobing

Journal of Materials Exploration and Findings

The development of green hydrogen in Indonesia, while promising for supporting industrial decarbonization, remains in its early stages and faces various challenges across technical, economic, and regulatory domains. This study aims to identify and prioritize the risks linked to green hydrogen supply chain in Indonesia, particularly for applications in the ammonia industry. A set of 49 potential risk factors was initially compiled through literature review and prior studies. The Delphi method was employed with a panel of experts to validate these risks, ultimately refining the list to 27 critical risk factors. Subsequently, the Technique for Order Preference by Similarity to …

A Review Of Energy Storage Technologies With Hydro Energy System Design For Off-Grid Electricity, Daniel H. Ngoma, Banet L. Masenga

Tanzania Journal of Engineering and Technology (TJET)

Many renewable energy sources such hydropower—particularly small-scale run-of-river and micro-hydro—offers reliable, low-cost generation. However, their inherent intermittency (due to seasonal flow variations) and inability to instantly match demand necessitate integrated energy storage to ensure a stable, continuous power supply. This review synthesizes contemporary energy storage technologies in the context of their integration with off-grid hydro energy system design.

The study examine a spectrum of storage solutions, evaluating their technical characteristics, costs, and suitability for hybrid hydro applications. Pumped Hydro Storage (PHS), while highly efficient and large-scale, is often geographically constrained and capital-intensive for small off-grid projects. Battery Energy Storage Systems …

Revitalising Tanzania’S Textile Industry Through The Uk Textile System’S Role, Charles M. Kahabi

Tanzania Journal of Engineering and Technology (TJET)

Currently, there is the environmental and social challenges emerging from the global clothing and textile industry, specifically on textile waste management.  Additionally, the flow of second-hand clothing (SHC) between European countries especially the UK and Tanzania is increasing. In the UK, rapid growth of second-hand clothing (mitumba) driven by fast fashion results in vast quantities of discarded garments, of which only a fraction is recycled, leaving the remainder in landfills. Conversely, Tanzania has long depended on imported SHC a practice that, while affordable, has undermined local textile industries and contributed to waste accumulation. By examining Tanzania’s textile landscape, the research …

Part Ii: Industrial Information Integration Review 2020-2025, Jinzhi Li

Information Technology & Decision Sciences Faculty Publications

Industrial Information Integration Engineering (IIIE) has become increasingly essential for improving operational efficiency and harmonizing heterogeneous industrial systems through advanced digital integration approaches. Fueled by rapid advancements in Industry 4.0 technologies—including digital twins, artificial intelligence, immersive interfaces, and IoT infrastructures—IIIE is substantially transforming traditional enterprise architecture and integration frameworks. This systematic review synthesizes recent developments and emerging trends, with particular attention to the accelerating adoption of digital twins and the deepening convergence between operational technologies (OT) and information technologies (IT) across multiple sectors. While notable progress has been made, significant challenges persist, especially in developing resilient integration architectures and fully …

The Role Of Ict In Enhancing National Logistics Performance And Economic Productivity, Jin Ho Kim

Journal of International Technology and Information Management

This study sheds light on the transformative impact of Information and Communication Technology (ICT) on national productivity via logistics performance. By distinguishing between mobile and wired Internet speeds, the research demonstrates how these technologies influence logistics performance and, in turn, national productivity across different economic contexts. The findings reveal a nuanced relationship between ICT and logistics performance, with mobile ICT playing a more significant role in developing countries due to its accessibility and cost-effectiveness. In contrast, developed countries benefit from a balanced integration of both mobile and wired ICT. Moreover, the study highlights the mediating role of logistics performance in …

Computer Vision-Based Collision Prevention In Construction: Bridging Academic Advances And Industrial Requirements, Marwa Ziadia, François Gauthier, Damien Burlet-Vienney

Études primaires

Computer vision (CV) technologies have emerged as promising tools for real-time collision risk management. This paper examines CV-based collision-prevention systems from academic and industrial perspectives with a focus on identifying technical and implementation challenges affecting their deployment on construction sites. A scoping review of 158 publications was conducted, alongside an assessment of commercial CV-based collision-prevention systems currently used in construction. The analysis focused on five key functions: object detection, distance measurement and proximity estimation, tracking, worker re-identification (ReID), and deployment robustness. Academic studies demonstrate substantial progress in detection accuracy, real-time processing, trajectory tracking, and predictive risk assessment through deep learning …

Techno-Economic Analysis Of Captive Solar Power Systems For Tanzania’S Manufacturing Sector: Barriers, Opportunities, And Feasibility, Edson Uhale, Sarah P. Ayeng'o

Tanzania Journal of Engineering and Technology (TJET)

This study provides a comprehensive techno-economic analysis of the barriers, opportunities, and feasibility of adopting captive solar photovoltaic (PV) systems in Tanzania’s industrial manufacturing sector. Despite Tanzania’s high solar irradiation potential, averaging 4.5 to 7.0 kWh/m²/day, the uptake of captive solar systems remains minimal, with only 2.3 percent of surveyed firms currently using solar energy, primarily for non-productive uses such as security lighting. Using a mixed-methods approach, data were collected from 43 manufacturing firms in the Dar es Salaam and Pwani regions through structured questionnaires, supported by PVSyst simulations and financial modelling to assess two system configurations: grid-connected PV systems …

Combined Optimisation Of Machining Parameters, Tool Wear, Dimensional Errors And Quality Deviations In Multi-Pass Turning Operations, Mussa I. Mgwatu

Tanzania Journal of Engineering and Technology (TJET)

Measurements of on-line tool wear and part dimensional accuracy in machining operations are not readily available in machining shop floor because they involve higher investment such that the decisions of tool wear and part quality for intermediate cutting passes cannot be justified. This paper demonstrates how the optimisation of machining parameters can be made together with tool wear and part quality for turning operations. Two optimisation models were developed for maximum material removal rate and minimum production cost. A theoretical framework was initially presented before the two models were formulated. Input data for the models were adopted from previous studies …

Developing A Waste-To-Energy Assessment Framework Integrating Engineering And Policy Dimensions Using A Triple Bottom Line Approach, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The management of municipal solid waste (MSW) in swiftly urbanizing Philippine cities has emerged as a critical concern in both energy and governance. Dependence on landfills is approaching critical thresholds as disposal sites near saturation, transportation costs escalate, and host communities increasingly resist garbage transfers. In response, this study proposes a comprehensive Waste-to-Energy (WtE) assessment framework that integrates engineering evaluation with policy and stakeholder analysis to support sustainable decision- making.

Using Baguio City as a case study, the framework applies a Triple Bottom Line (TBL) approach to evaluate three waste management scenarios: (1) current landfill-dominated practices, (2) engineered landfill with …

Data-Driven Evaluation Of Sustainable Waste-To-Energy Pathways For Intelligent Urban Systems, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

The handling of municipal solid waste (MSW) in swiftly urbanizing Philippine cities poses intricate energy and governance challenges. In Baguio City, reliance on landfills has reached critical levels due to diminishing capacity, rising transport costs, and opposition to trash transfers by nearby LGUs. Although shaped by unique topographical and governance constraints, Baguio’s situation reflects issues faced by other rapidly growing Philippine cities; therefore, analyzing it offers insights for national MSW decision-making. This study applies a triple bottom line (TBL) framework to assess three management scenarios: (1) Status Quo, where all MSW is landfilled with no energy recovery; (2) Landfill with …

Engineering Risk And Indigenous Resilience Toward Intelligent Decision Support For Mining In Ancestral Lands, Izech Brian O. Edwin, King Harold A. Recto

Electronics, Computer, and Communications Engineering Faculty Publications

Mining within ancestral territories reveals an ongoing conflict between technical viability and Indigenous consent. This collaborative study, conducted by an engineering scholar and a policy researcher of Indigenous heritage in Benguet among the Ibaloi and Kankanaey peoples, investigates how risk transparency and policy alignment can bridge existing divides, while formulating principles applicable to other Indigenous mining contexts. The study provides an initial evaluation of the feasibility of a proposed large-scale mining operation within a risk-informed, data-driven governance framework. Three elements of engineering risk were assessed utilizing literature-derived and proxy parameters: (1) Land degradation is indicated by a Soil Productivity Index …

Adoption Of Agrivoltaics In Developing Countries: A Review On Challenges, Opportunities And Future Prospects, Abdi J. Athumani, Pater Makolo

Tanzania Journal of Engineering and Technology (TJET)

This paper provides a review of agrivoltaics technology and how it has been applicable in developing countries, including African countries. Agrivoltaics, the integration of agricultural production with photovoltaic energy generation, offers promising solutions to water- energy-food nexus in developing countries. This technology offers the dual benefit of increasing agricultural productivity while generating clean energy, which is very important for regions facing frequent electricity shortages and declining agricultural yields due to climate change. However, despite its potential, the adoption of agrivoltaics in developing nations remains limited in comparison to developed countries due to financial, technical and policy constraints. This paper explores …

The Royal Academy Of Engineering, Uk And The Enriching Of Engineering Education Training And Practice Programme In Sub-Saharan Africa, Bavo B. Nyichomba

Tanzania Journal of Engineering and Technology (TJET)

This paper elucidates initiatives taken by the Royal Academy of Engineering, UK, to overcome barriers in education and training in Sub-Sahara African higher learning engineering institutions. The said barriers include mismatches of curriculum, ineffectual teaching and learning and little exposure of academic staff to engineering practice. In order to overcome such barriers, the Royal Academy of Engineering established the two programmes in the region. The first one, Enriching Engineering Education Programme (EEEP) from 2014/15 to 2015/16 where the University of Dar es Salaam coordinated this programme as a hub for East African universities namely; Makerere University (Uganda), Moi University (Kenya), …

Strategies For Overcoming Product Certification Challenges Faced By Food Manufacturing Small And Medium Enterprises In Tanzania, Peresi M. Bulemo

Tanzania Journal of Engineering and Technology (TJET)

Small and Medium-sized Enterprises (SMEs) in Tanzania face significant regulatory challenges within bureaucratic, costly, and centralized environments. These challenges contribute to an increase in unregistered enterprises and substandard products in the market. This study aimed to address the challenges SMEs encounter in obtaining product certification to improve their product quality and market competitiveness. A mixed-methods approach was employed, combining qualitative and quantitative research through surveys, interviews, and document analysis, with respondents from the Tanzania Bureau of Standards (TBS), Small Industries Development Organization (SIDO), and SMEs in the food manufacturing sector. Data analysis was conducted using SPSS and JASP. Findings revealed …

Prospects Of Clean Cooking Energy In Africa - Transition Pathways And Implications, Joseph H. Kihedu Dr.

Tanzania Journal of Engineering and Technology (TJET)

Despite abundant renewable energy resources, African countries still suffer from energy poverty, particularly in cooking. Up to 2022, about 74% of the African population had no access to clean cooking energy. With focus to Sub-Saharan African population, 90% has no access to clean cooking energy which decrease by 7% when kerosene is included. Traditional cooking, which involves the use of charcoal and firewood, is associated with health problems, environmental degradation, socioeconomic issues, and gender inequality. Transitioning to clean cooking energy not only promises significant health benefits but also offers opportunities for sustainable economic development and environmental preservation. In this study, …

Towards Metrology 4.0 In Developing Countries’ Manufacturing Industries, Jailos Nzumile

Tanzania Journal of Engineering and Technology (TJET)

A systematic literature review was conducted to unveil the status of the digital transformation of metrology in developing countries, as they are lagging in utilising fourth industrial revolution (IR4.0) technologies to transform manufacturing industries. A PRISMA technique was employed using various keywords to identify, screen, and select the relevant literature. Forty publications were selected for the review, mainly discussing IR 4.0 technologies in metrological operations. The results indicate that the digital transformation of metrology has yet to be initiated in developing countries. However, the employment of IR4.0 technologies in advancing metrological operations in manufacturing industries is mostly discussed in the …

Fuzzy Logic-Based Decision Support System For Adoption Of Industry 4.0 Predictive Maintenance By Manufacturing Industries, Fred E. Peter

Tanzania Journal of Engineering and Technology (TJET)

In the context of Industry 4.0, predictive maintenance enhances operational efficiency by optimizing processes, minimizing downtime, and improving cost-effectiveness. However, implementing predictive maintenance requires a systematic approach due to its complexity. This study collected expert input from 15 food and beverage manufacturing industries located in Dar es Salaam, Tanzania, using a purposive sampling technique. Six representatives were selected from each industry, and their opinions were analyzed using MATLAB 7.6 through a fuzzy logic inference system. The analysis focused on key factors influencing Industry 4.0 technology adoption for predictive maintenance, including adoption intention (strategic decision, equipment data, perceived benefit) and perceived …

Potential Use Of Pump As Turbine Coupled To Self-Excited Induction Generator For Micro-Hydro Cooking And Cooling Applications, Emanuel J. Nyirenda

Tanzania Journal of Engineering and Technology (TJET)

Clean cooking and efficient cooling in developing countries have recently become areas of great focus. Further, the environmental impact of flooding in high-capacity hydroelectric plants has become a major concern. As a result, there is growing emphasis on developing sustainable and decentralized energy solutions, focusing on the potential of micro-hydro systems, especially in rural and remote areas. Although there are several alternative energy generation methods, their application is not straightforward. One of the latest technologies under research is using pumps as turbines coupled to an induction generator. This paper explores through a rigorous experimental approach the possibility of using a …

Towards Effective Academia-Industry Collaborations: The Case Of Higher Learning Institutions In Tanzania, Fatuma S. Ikuja

Tanzania Journal of Engineering and Technology (TJET)

Industries are the main consumers of products from higher learning institutions (HLIs); graduates for employment and research outputs for socio-economic development. Research outputs from HLIs are commercialized as services or products facilitated by academia-industry collaborations. The collaborations are expected to address mismatch between labour market needs and HLIs’ products, which has resulted in graduates’ employability challenges. Despite their importance, effective academia-industry collaborations remain challenging. This study explores the effectiveness of Academia-Industry collaborations established by HLIs in implementing the Higher Education Economic Transformation (HEET) project (2021-2026) in Tanzania. One of the project objectives is to build functional linkages between industry and …

Fuzzy-Ahp Based Decision Support System For The Selection Of Optimal Maintenance Strategy For Meter Gauge Railway Infrastructure: A Review, Hamisi J. Maulid

Tanzania Journal of Engineering and Technology (TJET)

There are many uncertainties and complexities associated with maintaining Meter Gauge Railway (MGR) infrastructure, which calls for a methodical approach to decision-making. The development and application of a fuzzy-AHP-based decision support system (DSS) to select the optimal maintenance strategy for the MGR are presented in this study. The review covers research from 2013 to 2023 and focusses on the use of Multi-Criteria Decision Making (MCDM) and Fuzzy Analytic Hierarchy Process (Fuzzy-AHP) techniques in railway infrastructure maintenance. To manage the inherent uncertainties and subjective judgements involved in maintenance decision-making, the Fuzzy-AHP methodology combines fuzzy logic with the Analytic Hierarchy Process (AHP). …

Evaluation Of Thermal And Emission Performances Of Briquettes Produced From Carbonized Corn Cob And Corn Husk, Karina S. Motani

Tanzania Journal of Engineering and Technology (TJET)

The Mozambican agro-industrial sector relies heavily on various crops, with maize being the most significant. During processing, substantial waste is generated, which is often discarded as organic matter or burned, contributing to environmental pollution and the loss of potential energy resources. This study evaluated the thermal and emission performance of briquettes made from carbonized corn cob (CCC) and carbonized corn husk (CCH), using cashew nut skin as a binder for clean cooking applications. The briquettes were assessed against firewood and charcoal as control fuels, focusing on several energy performance parameters: water boiling time (WBT), combustion index (CI), thermal efficiency (TE), …

Review On Gas-To-Liquids Conversion Technology: Lessons From Case Studies And Potential Strategies For Implementation In Tanzania, Joseph H. Kihedu

Tanzania Journal of Engineering and Technology (TJET)

This review paper explores the transformative potential of Gas-to- Liquids (GTL) technology for harnessing Tanzania's vast natural gas resources. With significant discoveries of natural gas reserves totalling up to 57 Tcf in fields such as Songosongo, Mnazi Bay, Block 1, 2, 3 and 4. Tanzania is positioned to leverage GTL technology to convert these resources into high-value liquid fuels like gasoline, diesel and naphtha. Review of GTL process, its products and applications has been done. By analysing successful GTL projects globally and drawing lessons applicable to Tanzania, this paper provides strategic recommendations for policymakers and stakeholders to foster GTL development. …